Clock Divider ============= A D-type flip-flop can be configured as a clock divider. Objective --------- Study of a clock divider, using a D flip-flop (TTL family, 7474). Procedure --------- .. image:: schematics/clock-divider.svg :width: 300px - Enable A1 and A2, set range to 8 volts fullscale - Set SQ1 to 1000 Hz For a symmetric input, the input and output waveforms are shown below. .. image:: pics/clock-divider-screen.png :width: 400px Discussion ---------- The output toggles at every rising edge of the input, resulting in a division of frequency by two. The output is a symmetric squarewave, irrespective of the duty cycle of the input pulse, as shown below. Every rising edge of the input results in a level change at the output. .. image:: pics/clock-divider-screen-2.png :width: 400px