Digitizing Pendulum Oscillations ================================ The nature of oscillations of a pendulum can be studied by digitizing the angular displacement as a function of time. By fitting this data with a sinusoid, the time period can be extracted. However, it is much cheaper to digitize the velocity of the pendulum, using a simple DVD motor. Attaching the pendulm to the axis of the motor and oscillating it induces voltage, proportional to the angular velocity of the pendulum. Objective --------- Digitize the angular velocity of a rod pendulum and calculate the value of 'g' from it. Procedure --------- .. image:: schematics/pend-digitize.svg :width: 350px - Attach some sort of rigid pendulum to the axis of the motor. - Connect the motor between A3 and GND - Connect :math:`100~\Omega` resistor from Rg to Ground - Oscillate the pendulum and START digitizing .. image:: pics/pendulum-screen.png :width: 400px Discussion ---------- The observed waveform is shown in figure. Fitting it with equation :math:`A = A_0 \sin(\omega t + \theta) \exp( Dt) + C`, using Grace gave an angular frequency of :math:`10~Hz`. The pendulum should be made with a heavy bob and a light weight rod connecting it to the axis of the motor. In this case, the DC motor acts like a generator and the voltage is proportional to the instantaneous angular velocity.