| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2020 Rockchip Electronics Co., Ltd. |
| 4 |
* Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd. |
| 5 |
*/ |
| 6 |
|
| 7 |
/ { |
| 8 |
aliases { |
| 9 |
ethernet0 = &gmac; |
| 10 |
mmc0 = &emmc; |
| 11 |
mmc1 = &sdio; |
| 12 |
mmc2 = &sdmmc; |
| 13 |
}; |
| 14 |
|
| 15 |
chosen { |
| 16 |
stdout-path = "serial2:1500000n8"; |
| 17 |
}; |
| 18 |
|
| 19 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 20 |
compatible = "regulator-fixed"; |
| 21 |
regulator-name = "vcc5v0_sys"; |
| 22 |
regulator-always-on; |
| 23 |
regulator-boot-on; |
| 24 |
regulator-min-microvolt = <5000000>; |
| 25 |
regulator-max-microvolt = <5000000>; |
| 26 |
}; |
| 27 |
|
| 28 |
sdio_pwrseq: pwrseq-sdio { |
| 29 |
compatible = "mmc-pwrseq-simple"; |
| 30 |
clocks = <&rk809 1>; |
| 31 |
clock-names = "ext_clock"; |
| 32 |
pinctrl-names = "default"; |
| 33 |
pinctrl-0 = <&wifi_enable_h>; |
| 34 |
reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; |
| 35 |
}; |
| 36 |
}; |
| 37 |
|
| 38 |
&emmc { |
| 39 |
bus-width = <8>; |
| 40 |
cap-mmc-highspeed; |
| 41 |
mmc-hs200-1_8v; |
| 42 |
non-removable; |
| 43 |
pinctrl-names = "default"; |
| 44 |
pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>; |
| 45 |
rockchip,default-sample-phase = <90>; |
| 46 |
vmmc-supply = <&vcc_3v3>; |
| 47 |
vqmmc-supply = <&vcc_1v8>; |
| 48 |
status = "okay"; |
| 49 |
}; |
| 50 |
|
| 51 |
&i2c0 { |
| 52 |
clock-frequency = <400000>; |
| 53 |
status = "okay"; |
| 54 |
|
| 55 |
rk809: pmic@20 { |
| 56 |
compatible = "rockchip,rk809"; |
| 57 |
reg = <0x20>; |
| 58 |
interrupt-parent = <&gpio0>; |
| 59 |
interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>; |
| 60 |
#clock-cells = <1>; |
| 61 |
clock-output-names = "rk808-clkout1", "rk808-clkout2"; |
| 62 |
pinctrl-names = "default"; |
| 63 |
pinctrl-0 = <&pmic_int_l>; |
| 64 |
rockchip,system-power-controller; |
| 65 |
wakeup-source; |
| 66 |
|
| 67 |
vcc1-supply = <&vcc5v0_sys>; |
| 68 |
vcc2-supply = <&vcc5v0_sys>; |
| 69 |
vcc3-supply = <&vcc5v0_sys>; |
| 70 |
vcc4-supply = <&vcc5v0_sys>; |
| 71 |
vcc5-supply = <&vcc_buck5>; |
| 72 |
vcc6-supply = <&vcc_buck5>; |
| 73 |
vcc7-supply = <&vcc5v0_sys>; |
| 74 |
vcc8-supply = <&vcc3v3_sys>; |
| 75 |
vcc9-supply = <&vcc5v0_sys>; |
| 76 |
|
| 77 |
regulators { |
| 78 |
vdd_npu_vepu: DCDC_REG1 { |
| 79 |
regulator-name = "vdd_npu_vepu"; |
| 80 |
regulator-always-on; |
| 81 |
regulator-boot-on; |
| 82 |
regulator-initial-mode = <0x2>; |
| 83 |
regulator-min-microvolt = <650000>; |
| 84 |
regulator-max-microvolt = <950000>; |
| 85 |
regulator-ramp-delay = <6001>; |
| 86 |
regulator-state-mem { |
| 87 |
regulator-off-in-suspend; |
| 88 |
}; |
| 89 |
}; |
| 90 |
|
| 91 |
vdd_arm: DCDC_REG2 { |
| 92 |
regulator-name = "vdd_arm"; |
| 93 |
regulator-always-on; |
| 94 |
regulator-boot-on; |
| 95 |
regulator-initial-mode = <0x2>; |
| 96 |
regulator-min-microvolt = <725000>; |
| 97 |
regulator-max-microvolt = <1350000>; |
| 98 |
regulator-ramp-delay = <6001>; |
| 99 |
regulator-state-mem { |
| 100 |
regulator-off-in-suspend; |
| 101 |
}; |
| 102 |
}; |
| 103 |
|
| 104 |
vcc_ddr: DCDC_REG3 { |
| 105 |
regulator-name = "vcc_ddr"; |
| 106 |
regulator-always-on; |
| 107 |
regulator-boot-on; |
| 108 |
regulator-initial-mode = <0x2>; |
| 109 |
regulator-state-mem { |
| 110 |
regulator-on-in-suspend; |
| 111 |
}; |
| 112 |
}; |
| 113 |
|
| 114 |
vcc3v3_sys: DCDC_REG4 { |
| 115 |
regulator-name = "vcc3v3_sys"; |
| 116 |
regulator-always-on; |
| 117 |
regulator-boot-on; |
| 118 |
regulator-initial-mode = <0x2>; |
| 119 |
regulator-min-microvolt = <3300000>; |
| 120 |
regulator-max-microvolt = <3300000>; |
| 121 |
regulator-state-mem { |
| 122 |
regulator-on-in-suspend; |
| 123 |
regulator-suspend-microvolt = <3300000>; |
| 124 |
}; |
| 125 |
}; |
| 126 |
|
| 127 |
vcc_buck5: DCDC_REG5 { |
| 128 |
regulator-name = "vcc_buck5"; |
| 129 |
regulator-always-on; |
| 130 |
regulator-boot-on; |
| 131 |
regulator-min-microvolt = <2200000>; |
| 132 |
regulator-max-microvolt = <2200000>; |
| 133 |
regulator-state-mem { |
| 134 |
regulator-on-in-suspend; |
| 135 |
regulator-suspend-microvolt = <2200000>; |
| 136 |
}; |
| 137 |
}; |
| 138 |
|
| 139 |
vcc_0v8: LDO_REG1 { |
| 140 |
regulator-name = "vcc_0v8"; |
| 141 |
regulator-always-on; |
| 142 |
regulator-boot-on; |
| 143 |
regulator-min-microvolt = <800000>; |
| 144 |
regulator-max-microvolt = <800000>; |
| 145 |
regulator-state-mem { |
| 146 |
regulator-off-in-suspend; |
| 147 |
}; |
| 148 |
}; |
| 149 |
|
| 150 |
vcc1v8_pmu: LDO_REG2 { |
| 151 |
regulator-name = "vcc1v8_pmu"; |
| 152 |
regulator-always-on; |
| 153 |
regulator-boot-on; |
| 154 |
regulator-min-microvolt = <1800000>; |
| 155 |
regulator-max-microvolt = <1800000>; |
| 156 |
regulator-state-mem { |
| 157 |
regulator-on-in-suspend; |
| 158 |
regulator-suspend-microvolt = <1800000>; |
| 159 |
}; |
| 160 |
}; |
| 161 |
|
| 162 |
vdd0v8_pmu: LDO_REG3 { |
| 163 |
regulator-name = "vcc0v8_pmu"; |
| 164 |
regulator-always-on; |
| 165 |
regulator-boot-on; |
| 166 |
regulator-min-microvolt = <800000>; |
| 167 |
regulator-max-microvolt = <800000>; |
| 168 |
regulator-state-mem { |
| 169 |
regulator-on-in-suspend; |
| 170 |
regulator-suspend-microvolt = <800000>; |
| 171 |
}; |
| 172 |
}; |
| 173 |
|
| 174 |
vcc_1v8: LDO_REG4 { |
| 175 |
regulator-name = "vcc_1v8"; |
| 176 |
regulator-always-on; |
| 177 |
regulator-boot-on; |
| 178 |
regulator-min-microvolt = <1800000>; |
| 179 |
regulator-max-microvolt = <1800000>; |
| 180 |
regulator-state-mem { |
| 181 |
regulator-on-in-suspend; |
| 182 |
regulator-suspend-microvolt = <1800000>; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
vcc_dovdd: LDO_REG5 { |
| 187 |
regulator-name = "vcc_dovdd"; |
| 188 |
regulator-always-on; |
| 189 |
regulator-boot-on; |
| 190 |
regulator-min-microvolt = <1800000>; |
| 191 |
regulator-max-microvolt = <1800000>; |
| 192 |
regulator-state-mem { |
| 193 |
regulator-off-in-suspend; |
| 194 |
}; |
| 195 |
}; |
| 196 |
|
| 197 |
vcc_dvdd: LDO_REG6 { |
| 198 |
regulator-name = "vcc_dvdd"; |
| 199 |
regulator-min-microvolt = <1200000>; |
| 200 |
regulator-max-microvolt = <1200000>; |
| 201 |
regulator-state-mem { |
| 202 |
regulator-off-in-suspend; |
| 203 |
}; |
| 204 |
}; |
| 205 |
|
| 206 |
vcc_avdd: LDO_REG7 { |
| 207 |
regulator-name = "vcc_avdd"; |
| 208 |
regulator-min-microvolt = <2800000>; |
| 209 |
regulator-max-microvolt = <2800000>; |
| 210 |
regulator-state-mem { |
| 211 |
regulator-off-in-suspend; |
| 212 |
}; |
| 213 |
}; |
| 214 |
|
| 215 |
vccio_sd: LDO_REG8 { |
| 216 |
regulator-name = "vccio_sd"; |
| 217 |
regulator-always-on; |
| 218 |
regulator-boot-on; |
| 219 |
regulator-min-microvolt = <1800000>; |
| 220 |
regulator-max-microvolt = <3300000>; |
| 221 |
regulator-state-mem { |
| 222 |
regulator-off-in-suspend; |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
vcc3v3_sd: LDO_REG9 { |
| 227 |
regulator-name = "vcc3v3_sd"; |
| 228 |
regulator-always-on; |
| 229 |
regulator-boot-on; |
| 230 |
regulator-min-microvolt = <3300000>; |
| 231 |
regulator-max-microvolt = <3300000>; |
| 232 |
regulator-state-mem { |
| 233 |
regulator-off-in-suspend; |
| 234 |
}; |
| 235 |
}; |
| 236 |
|
| 237 |
vcc_5v0: SWITCH_REG1 { |
| 238 |
regulator-name = "vcc_5v0"; |
| 239 |
}; |
| 240 |
|
| 241 |
vcc_3v3: SWITCH_REG2 { |
| 242 |
regulator-name = "vcc_3v3"; |
| 243 |
regulator-always-on; |
| 244 |
regulator-boot-on; |
| 245 |
}; |
| 246 |
}; |
| 247 |
}; |
| 248 |
}; |
| 249 |
|
| 250 |
&i2c2 { |
| 251 |
status = "okay"; |
| 252 |
clock-frequency = <400000>; |
| 253 |
|
| 254 |
pcf8563: rtc@51 { |
| 255 |
compatible = "nxp,pcf8563"; |
| 256 |
reg = <0x51>; |
| 257 |
#clock-cells = <0>; |
| 258 |
interrupt-parent = <&gpio0>; |
| 259 |
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; |
| 260 |
clock-output-names = "xin32k"; |
| 261 |
}; |
| 262 |
}; |
| 263 |
|
| 264 |
&gmac { |
| 265 |
assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>, |
| 266 |
<&cru CLK_GMAC_TX_RX>; |
| 267 |
assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>, |
| 268 |
<&cru RMII_MODE_CLK>; |
| 269 |
assigned-clock-rates = <0>, <50000000>; |
| 270 |
clock_in_out = "output"; |
| 271 |
phy-handle = <&phy>; |
| 272 |
phy-mode = "rmii"; |
| 273 |
phy-supply = <&vcc_3v3>; |
| 274 |
pinctrl-names = "default"; |
| 275 |
pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>; |
| 276 |
status = "okay"; |
| 277 |
}; |
| 278 |
|
| 279 |
&mdio { |
| 280 |
phy: ethernet-phy@0 { |
| 281 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 282 |
reg = <0x0>; |
| 283 |
pinctrl-names = "default"; |
| 284 |
pinctrl-0 = <ð_phy_rst>; |
| 285 |
reset-active-low; |
| 286 |
reset-assert-us = <50000>; |
| 287 |
reset-deassert-us = <10000>; |
| 288 |
reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; |
| 289 |
}; |
| 290 |
}; |
| 291 |
|
| 292 |
&pinctrl { |
| 293 |
ethernet { |
| 294 |
eth_phy_rst: eth-phy-rst { |
| 295 |
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>; |
| 296 |
}; |
| 297 |
}; |
| 298 |
bt { |
| 299 |
bt_enable: bt-enable { |
| 300 |
rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 301 |
}; |
| 302 |
|
| 303 |
bt_wake_dev: bt-wake-dev { |
| 304 |
rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 305 |
}; |
| 306 |
|
| 307 |
bt_wake_host: bt-wake-host { |
| 308 |
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 309 |
}; |
| 310 |
}; |
| 311 |
|
| 312 |
pmic { |
| 313 |
pmic_int_l: pmic-int-l { |
| 314 |
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; |
| 315 |
}; |
| 316 |
}; |
| 317 |
|
| 318 |
wifi { |
| 319 |
wifi_enable_h: wifi-enable-h { |
| 320 |
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 321 |
}; |
| 322 |
}; |
| 323 |
}; |
| 324 |
|
| 325 |
&pmu_io_domains { |
| 326 |
pmuio0-supply = <&vcc3v3_sys>; |
| 327 |
pmuio1-supply = <&vcc3v3_sys>; |
| 328 |
vccio1-supply = <&vcc_1v8>; |
| 329 |
vccio2-supply = <&vccio_sd>; |
| 330 |
vccio3-supply = <&vcc3v3_sd>; |
| 331 |
vccio4-supply = <&vcc_3v3>; |
| 332 |
vccio5-supply = <&vcc_3v3>; |
| 333 |
vccio6-supply = <&vcc_3v3>; |
| 334 |
vccio7-supply = <&vcc_1v8>; |
| 335 |
status = "okay"; |
| 336 |
}; |
| 337 |
|
| 338 |
&saradc { |
| 339 |
vref-supply = <&vcc_1v8>; |
| 340 |
status = "okay"; |
| 341 |
}; |
| 342 |
|
| 343 |
&sdio { |
| 344 |
bus-width = <4>; |
| 345 |
cap-sdio-irq; |
| 346 |
keep-power-in-suspend; |
| 347 |
max-frequency = <25000000>; |
| 348 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 349 |
non-removable; |
| 350 |
pinctrl-names = "default"; |
| 351 |
pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>; |
| 352 |
rockchip,default-sample-phase = <90>; |
| 353 |
vmmc-supply = <&vcc3v3_sd>; |
| 354 |
vqmmc-supply = <&vcc_1v8>; |
| 355 |
status = "okay"; |
| 356 |
}; |
| 357 |
|
| 358 |
&sdmmc { |
| 359 |
bus-width = <4>; |
| 360 |
cap-mmc-highspeed; |
| 361 |
cap-sd-highspeed; |
| 362 |
card-detect-delay = <200>; |
| 363 |
pinctrl-names = "default"; |
| 364 |
pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>; |
| 365 |
rockchip,default-sample-phase = <90>; |
| 366 |
sd-uhs-sdr12; |
| 367 |
sd-uhs-sdr25; |
| 368 |
sd-uhs-sdr104; |
| 369 |
vqmmc-supply = <&vccio_sd>; |
| 370 |
status = "okay"; |
| 371 |
}; |
| 372 |
|
| 373 |
&uart0 { |
| 374 |
pinctrl-names = "default"; |
| 375 |
pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>; |
| 376 |
uart-has-rtscts; |
| 377 |
status = "okay"; |
| 378 |
|
| 379 |
bluetooth { |
| 380 |
compatible = "realtek,rtl8723ds-bt"; |
| 381 |
device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */ |
| 382 |
enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */ |
| 383 |
host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */ |
| 384 |
max-speed = <2000000>; |
| 385 |
pinctrl-names = "default"; |
| 386 |
pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>; |
| 387 |
}; |
| 388 |
}; |
| 389 |
|
| 390 |
&uart2 { |
| 391 |
status = "okay"; |
| 392 |
}; |
| 393 |
|
| 394 |
&uart3 { |
| 395 |
pinctrl-names = "default"; |
| 396 |
pinctrl-0 = <&uart3m2_xfer>; |
| 397 |
status = "okay"; |
| 398 |
}; |
| 399 |
|
| 400 |
&uart4 { |
| 401 |
pinctrl-names = "default"; |
| 402 |
pinctrl-0 = <&uart4m2_xfer>; |
| 403 |
status = "okay"; |
| 404 |
}; |