| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Google Veyron (and derivatives) board device tree source |
| 4 |
* Chromebook specific parts |
| 5 |
* |
| 6 |
* Copyright 2015 Google, Inc |
| 7 |
*/ |
| 8 |
|
| 9 |
#include <dt-bindings/clock/rockchip,rk808.h> |
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
#include "rk3288-veyron.dtsi" |
| 12 |
#include "rk3288-veyron-analog-audio.dtsi" |
| 13 |
#include "rk3288-veyron-edp.dtsi" |
| 14 |
#include "rk3288-veyron-sdmmc.dtsi" |
| 15 |
|
| 16 |
/ { |
| 17 |
aliases { |
| 18 |
/* Assign 20 so we don't get confused w/ builtin ones */ |
| 19 |
i2c20 = &i2c_tunnel; |
| 20 |
}; |
| 21 |
|
| 22 |
gpio-charger { |
| 23 |
compatible = "gpio-charger"; |
| 24 |
charger-type = "mains"; |
| 25 |
gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>; |
| 26 |
pinctrl-names = "default"; |
| 27 |
pinctrl-0 = <&ac_present_ap>; |
| 28 |
}; |
| 29 |
|
| 30 |
lid_switch: lid-switch { |
| 31 |
compatible = "gpio-keys"; |
| 32 |
pinctrl-names = "default"; |
| 33 |
pinctrl-0 = <&ap_lid_int_l>; |
| 34 |
|
| 35 |
switch-lid { |
| 36 |
label = "Lid"; |
| 37 |
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; |
| 38 |
wakeup-source; |
| 39 |
linux,code = <SW_LID>; |
| 40 |
linux,input-type = <EV_SW>; |
| 41 |
debounce-interval = <1>; |
| 42 |
}; |
| 43 |
}; |
| 44 |
|
| 45 |
/* A non-regulated voltage from power supply or battery */ |
| 46 |
vccsys: regulator-vccsys { |
| 47 |
compatible = "regulator-fixed"; |
| 48 |
regulator-name = "vccsys"; |
| 49 |
regulator-boot-on; |
| 50 |
regulator-always-on; |
| 51 |
}; |
| 52 |
|
| 53 |
vcc33_sys: regulator-vcc33-sys { |
| 54 |
vin-supply = <&vccsys>; |
| 55 |
}; |
| 56 |
|
| 57 |
vcc_5v: regulator-vcc-5v { |
| 58 |
vin-supply = <&vccsys>; |
| 59 |
}; |
| 60 |
|
| 61 |
/* This turns on vbus for host1 (dwc2) */ |
| 62 |
vcc5_host1: regulator-vcc5-host1 { |
| 63 |
compatible = "regulator-fixed"; |
| 64 |
enable-active-high; |
| 65 |
gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; |
| 66 |
pinctrl-names = "default"; |
| 67 |
pinctrl-0 = <&host1_pwr_en>; |
| 68 |
regulator-name = "vcc5_host1"; |
| 69 |
regulator-always-on; |
| 70 |
regulator-boot-on; |
| 71 |
}; |
| 72 |
|
| 73 |
/* This turns on vbus for otg for host mode (dwc2) */ |
| 74 |
vcc5v_otg: regulator-vcc5v-otg { |
| 75 |
compatible = "regulator-fixed"; |
| 76 |
enable-active-high; |
| 77 |
gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; |
| 78 |
pinctrl-names = "default"; |
| 79 |
pinctrl-0 = <&usbotg_pwren_h>; |
| 80 |
regulator-name = "vcc5_host2"; |
| 81 |
regulator-always-on; |
| 82 |
regulator-boot-on; |
| 83 |
}; |
| 84 |
}; |
| 85 |
|
| 86 |
&rk808 { |
| 87 |
vcc11-supply = <&vcc_5v>; |
| 88 |
|
| 89 |
regulators { |
| 90 |
vcc33_ccd: LDO_REG8 { |
| 91 |
regulator-name = "vcc33_ccd"; |
| 92 |
regulator-always-on; |
| 93 |
regulator-boot-on; |
| 94 |
regulator-min-microvolt = <3300000>; |
| 95 |
regulator-max-microvolt = <3300000>; |
| 96 |
regulator-state-mem { |
| 97 |
regulator-off-in-suspend; |
| 98 |
}; |
| 99 |
}; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
&spi0 { |
| 104 |
status = "okay"; |
| 105 |
|
| 106 |
cros_ec: ec@0 { |
| 107 |
compatible = "google,cros-ec-spi"; |
| 108 |
reg = <0>; |
| 109 |
google,cros-ec-spi-pre-delay = <30>; |
| 110 |
interrupt-parent = <&gpio7>; |
| 111 |
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; |
| 112 |
pinctrl-names = "default"; |
| 113 |
pinctrl-0 = <&ec_int>; |
| 114 |
spi-max-frequency = <3000000>; |
| 115 |
|
| 116 |
i2c_tunnel: i2c-tunnel { |
| 117 |
compatible = "google,cros-ec-i2c-tunnel"; |
| 118 |
google,remote-bus = <0>; |
| 119 |
#address-cells = <1>; |
| 120 |
#size-cells = <0>; |
| 121 |
}; |
| 122 |
}; |
| 123 |
}; |
| 124 |
|
| 125 |
&i2c4 { |
| 126 |
trackpad@15 { |
| 127 |
compatible = "elan,ekth3000"; |
| 128 |
reg = <0x15>; |
| 129 |
interrupt-parent = <&gpio7>; |
| 130 |
interrupts = <RK_PA3 IRQ_TYPE_EDGE_FALLING>; |
| 131 |
pinctrl-names = "default"; |
| 132 |
pinctrl-0 = <&trackpad_int>; |
| 133 |
vcc-supply = <&vcc33_io>; |
| 134 |
wakeup-source; |
| 135 |
}; |
| 136 |
}; |
| 137 |
|
| 138 |
&pinctrl { |
| 139 |
buttons { |
| 140 |
ap_lid_int_l: ap-lid-int-l { |
| 141 |
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; |
| 142 |
}; |
| 143 |
}; |
| 144 |
|
| 145 |
charger { |
| 146 |
ac_present_ap: ac-present-ap { |
| 147 |
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
cros-ec { |
| 152 |
ec_int: ec-int { |
| 153 |
rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 154 |
}; |
| 155 |
}; |
| 156 |
|
| 157 |
suspend { |
| 158 |
suspend_l_wake: suspend-l-wake { |
| 159 |
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>; |
| 160 |
}; |
| 161 |
|
| 162 |
suspend_l_sleep: suspend-l-sleep { |
| 163 |
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_high>; |
| 164 |
}; |
| 165 |
}; |
| 166 |
|
| 167 |
trackpad { |
| 168 |
trackpad_int: trackpad-int { |
| 169 |
rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
usb-host { |
| 174 |
host1_pwr_en: host1-pwr-en { |
| 175 |
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 176 |
}; |
| 177 |
|
| 178 |
usbotg_pwren_h: usbotg-pwren-h { |
| 179 |
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 180 |
}; |
| 181 |
}; |
| 182 |
}; |
| 183 |
|
| 184 |
#include "../cros-ec-keyboard.dtsi" |