Debian Codegraph @

arch/arm/boot/dts/rockchip/rk3066a-marsboard.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2014 Romain Perier <[email protected]>
4 */
5
6 /dts-v1/;
7 #include "rk3066a.dtsi"
8
9 / {
10 model = "MarsBoard RK3066";
11 compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
12
13 aliases {
14 mmc0 = &mmc0;
15 };
16
17 memory@60000000 {
18 device_type = "memory";
19 reg = <0x60000000 0x40000000>;
20 };
21
22 hdmi_con {
23 compatible = "hdmi-connector";
24 type = "a";
25
26 port {
27 hdmi_con_in: endpoint {
28 remote-endpoint = <&hdmi_out_con>;
29 };
30 };
31 };
32
33 vdd_log: regulator-vdd-log {
34 compatible = "pwm-regulator";
35 pwms = <&pwm3 0 1000>;
36 regulator-name = "vdd_log";
37 regulator-min-microvolt = <1200000>;
38 regulator-max-microvolt = <1200000>;
39 regulator-always-on;
40 voltage-table = <1000000 100>,
41 <1200000 42>;
42 status = "okay";
43 };
44
45 vcc_sd0: regulator-sdmmc {
46 compatible = "regulator-fixed";
47 regulator-name = "sdmmc-supply";
48 regulator-min-microvolt = <3000000>;
49 regulator-max-microvolt = <3000000>;
50 gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
51 startup-delay-us = <100000>;
52 vin-supply = <&vcc_io>;
53 };
54
55 vsys: regulator-vsys {
56 compatible = "regulator-fixed";
57 regulator-name = "vsys";
58 regulator-min-microvolt = <5000000>;
59 regulator-max-microvolt = <5000000>;
60 regulator-boot-on;
61 };
62 };
63
64 &cpu0 {
65 cpu-supply = <&vdd_arm>;
66 };
67
68 &cpu1 {
69 cpu-supply = <&vdd_arm>;
70 };
71
72 &gpu {
73 status = "okay";
74 };
75
76 &hdmi {
77 status = "okay";
78 };
79
80 &hdmi_in_vop1 {
81 status = "disabled";
82 };
83
84 &hdmi_out {
85 hdmi_out_con: endpoint {
86 remote-endpoint = <&hdmi_con_in>;
87 };
88 };
89
90 &hdmi_sound {
91 status = "okay";
92 };
93
94 &i2c1 {
95 status = "okay";
96 clock-frequency = <400000>;
97
98 tps: tps@2d {
99 compatible = "ti,tps65910";
100 reg = <0x2d>;
101
102 gpio-controller;
103 #gpio-cells = <2>;
104
105 interrupt-parent = <&gpio6>;
106 interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
107
108 interrupt-controller;
109 #interrupt-cells = <2>;
110
111 vcc1-supply = <&vsys>;
112 vcc2-supply = <&vsys>;
113 vcc3-supply = <&vsys>;
114 vcc4-supply = <&vsys>;
115 vcc5-supply = <&vcc_io>;
116 vcc6-supply = <&vcc_io>;
117 vcc7-supply = <&vsys>;
118 vccio-supply = <&vsys>;
119
120 regulators {
121 vcc_rtc: vrtc {
122 regulator-name = "vcc_rtc";
123 regulator-always-on;
124 };
125
126 vcc_io: vio {
127 regulator-name = "vcc_io";
128 regulator-always-on;
129 };
130
131 vdd_arm: vdd1 {
132 regulator-name = "vdd_arm";
133 regulator-min-microvolt = <600000>;
134 regulator-max-microvolt = <1500000>;
135 regulator-boot-on;
136 regulator-always-on;
137 };
138
139 vcc_ddr: vdd2 {
140 regulator-name = "vcc_ddr";
141 regulator-min-microvolt = <600000>;
142 regulator-max-microvolt = <1500000>;
143 regulator-boot-on;
144 regulator-always-on;
145 };
146
147 vcc18_cif: vdig1 {
148 regulator-name = "vcc18_cif";
149 regulator-always-on;
150 };
151
152 vdd_11: vdig2 {
153 regulator-name = "vdd_11";
154 regulator-always-on;
155 };
156
157 vcc_25: vpll {
158 regulator-name = "vcc_25";
159 regulator-always-on;
160 };
161
162 vcc_18: vdac {
163 regulator-name = "vcc_18";
164 regulator-always-on;
165 };
166
167 vcc25_hdmi: vaux1 {
168 regulator-name = "vcc25_hdmi";
169 regulator-always-on;
170 };
171
172 vcca_33: vaux2 {
173 regulator-name = "vcca_33";
174 regulator-always-on;
175 };
176
177 vcc_rmii: vaux33 {
178 regulator-name = "vcc_rmii";
179 };
180
181 vcc28_cif: vmmc {
182 regulator-name = "vcc28_cif";
183 regulator-always-on;
184 };
185 };
186 };
187 };
188
189 &emac {
190 phy = <&phy0>;
191 phy-supply = <&vcc_rmii>;
192 pinctrl-names = "default";
193 pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
194 status = "okay";
195
196 mdio {
197 #address-cells = <1>;
198 #size-cells = <0>;
199
200 phy0: ethernet-phy@0 {
201 reg = <0>;
202 interrupt-parent = <&gpio1>;
203 interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
204 };
205 };
206 };
207
208 &mmc0 {
209 status = "okay";
210
211 pinctrl-names = "default";
212 pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
213 vmmc-supply = <&vcc_sd0>;
214 };
215
216 &pinctrl {
217 lan8720a {
218 phy_int: phy-int {
219 rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
220 };
221 };
222 };
223
224 &pwm3 {
225 status = "okay";
226 };
227
228 &uart0 {
229 status = "okay";
230 };
231
232 &uart1 {
233 status = "okay";
234 };
235
236 &uart2 {
237 status = "okay";
238 };
239
240 &uart3 {
241 status = "okay";
242 };
243
244 &usbphy {
245 status = "okay";
246 };
247
248 &usb_host {
249 status = "okay";
250 };
251
252 &usb_otg {
253 status = "okay";
254 };
255
256 &vop0 {
257 status = "okay";
258 };
259
260 &wdt {
261 status = "okay";
262 };