Debian Codegraph @

arch/arm/boot/dts/rockchip/rk3288-miqi.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2016 Heiko Stuebner <[email protected]>
4 */
5
6 /dts-v1/;
7 #include <dt-bindings/input/input.h>
8 #include "rk3288.dtsi"
9
10 / {
11 model = "mqmaker MiQi";
12 compatible = "mqmaker,miqi", "rockchip,rk3288";
13
14 chosen {
15 stdout-path = "serial2:115200n8";
16 };
17
18 memory@0 {
19 device_type = "memory";
20 reg = <0x0 0x0 0x0 0x80000000>;
21 };
22
23 ext_gmac: external-gmac-clock {
24 compatible = "fixed-clock";
25 #clock-cells = <0>;
26 clock-frequency = <125000000>;
27 clock-output-names = "ext_gmac";
28 };
29
30 leds {
31 compatible = "gpio-leds";
32
33 work_led: led-0 {
34 gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
35 label = "miqi:green:user";
36 linux,default-trigger = "timer";
37 };
38 };
39
40 vcc_flash: regulator-flash {
41 compatible = "regulator-fixed";
42 regulator-name = "vcc_flash";
43 regulator-min-microvolt = <1800000>;
44 regulator-max-microvolt = <1800000>;
45 vin-supply = <&vcc_io>;
46 };
47
48 vcc_host: regulator-usb-host {
49 compatible = "regulator-fixed";
50 enable-active-high;
51 gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
52 pinctrl-names = "default";
53 pinctrl-0 = <&host_vbus_drv>;
54 regulator-name = "vcc_host";
55 regulator-min-microvolt = <5000000>;
56 regulator-max-microvolt = <5000000>;
57 regulator-always-on;
58 vin-supply = <&vcc_sys>;
59 };
60
61 vcc_sd: regulator-sdmmc {
62 compatible = "regulator-fixed";
63 gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>;
64 pinctrl-names = "default";
65 pinctrl-0 = <&sdmmc_pwr>;
66 regulator-name = "vcc_sd";
67 regulator-min-microvolt = <3300000>;
68 regulator-max-microvolt = <3300000>;
69 startup-delay-us = <100000>;
70 vin-supply = <&vcc_io>;
71 };
72
73 vcc_sys: regulator-vsys {
74 compatible = "regulator-fixed";
75 regulator-name = "vcc_sys";
76 regulator-min-microvolt = <5000000>;
77 regulator-max-microvolt = <5000000>;
78 regulator-always-on;
79 regulator-boot-on;
80 };
81
82 sound {
83 compatible = "simple-audio-card";
84 simple-audio-card,format = "i2s";
85 simple-audio-card,name = "HDMI";
86 simple-audio-card,mclk-fs = <512>;
87
88 simple-audio-card,codec {
89 sound-dai = <&hdmi>;
90 };
91
92 simple-audio-card,cpu {
93 sound-dai = <&i2s>;
94 };
95 };
96 };
97
98 &cpu0 {
99 cpu-supply = <&vdd_cpu>;
100 };
101
102 &cpu1 {
103 cpu-supply = <&vdd_cpu>;
104 };
105
106 &cpu2 {
107 cpu-supply = <&vdd_cpu>;
108 };
109
110 &cpu3 {
111 cpu-supply = <&vdd_cpu>;
112 };
113
114 &emmc {
115 bus-width = <8>;
116 cap-mmc-highspeed;
117 non-removable;
118 pinctrl-names = "default";
119 pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
120 vmmc-supply = <&vcc_io>;
121 vqmmc-supply = <&vcc_flash>;
122 status = "okay";
123 };
124
125 &gmac {
126 assigned-clocks = <&cru SCLK_MAC>;
127 assigned-clock-parents = <&ext_gmac>;
128 clock_in_out = "input";
129 pinctrl-names = "default";
130 pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
131 phy-supply = <&vcc_lan>;
132 phy-mode = "rgmii";
133 snps,reset-active-low;
134 snps,reset-delays-us = <0 10000 1000000>;
135 snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>;
136 tx_delay = <0x30>;
137 rx_delay = <0x10>;
138 status = "okay";
139 };
140
141 &gpu {
142 mali-supply = <&vdd_gpu>;
143 status = "okay";
144 };
145
146 &hdmi {
147 ddc-i2c-bus = <&i2c5>;
148 pinctrl-names = "default";
149 pinctrl-0 = <&hdmi_cec_c0>;
150 status = "okay";
151 };
152
153 &i2c0 {
154 clock-frequency = <400000>;
155 status = "okay";
156
157 vdd_cpu: syr827@40 {
158 compatible = "silergy,syr827";
159 fcs,suspend-voltage-selector = <1>;
160 reg = <0x40>;
161 regulator-name = "vdd_cpu";
162 regulator-min-microvolt = <850000>;
163 regulator-max-microvolt = <1350000>;
164 regulator-always-on;
165 regulator-boot-on;
166 regulator-enable-ramp-delay = <300>;
167 regulator-ramp-delay = <8000>;
168 vin-supply = <&vcc_sys>;
169 };
170
171 vdd_gpu: syr828@41 {
172 compatible = "silergy,syr828";
173 fcs,suspend-voltage-selector = <1>;
174 reg = <0x41>;
175 regulator-name = "vdd_gpu";
176 regulator-min-microvolt = <850000>;
177 regulator-max-microvolt = <1350000>;
178 regulator-always-on;
179 vin-supply = <&vcc_sys>;
180 };
181
182 hym8563: rtc@51 {
183 compatible = "haoyu,hym8563";
184 reg = <0x51>;
185 #clock-cells = <0>;
186 clock-output-names = "xin32k";
187 };
188
189 act8846: act8846@5a {
190 compatible = "active-semi,act8846";
191 reg = <0x5a>;
192 pinctrl-names = "default";
193 pinctrl-0 = <&pmic_vsel>;
194 system-power-controller;
195
196 vp1-supply = <&vcc_sys>;
197 vp2-supply = <&vcc_sys>;
198 vp3-supply = <&vcc_sys>;
199 vp4-supply = <&vcc_sys>;
200 inl1-supply = <&vcc_sys>;
201 inl2-supply = <&vcc_sys>;
202 inl3-supply = <&vcc_20>;
203
204 regulators {
205 vcc_ddr: REG1 {
206 regulator-name = "vcc_ddr";
207 regulator-always-on;
208 };
209
210 vcc_io: REG2 {
211 regulator-name = "vcc_io";
212 regulator-min-microvolt = <3300000>;
213 regulator-max-microvolt = <3300000>;
214 regulator-always-on;
215 };
216
217 vdd_log: REG3 {
218 regulator-name = "vdd_log";
219 regulator-min-microvolt = <1100000>;
220 regulator-max-microvolt = <1100000>;
221 regulator-always-on;
222 };
223
224 vcc_20: REG4 {
225 regulator-name = "vcc_20";
226 regulator-min-microvolt = <2000000>;
227 regulator-max-microvolt = <2000000>;
228 regulator-always-on;
229 };
230
231 vccio_sd: REG5 {
232 regulator-name = "vccio_sd";
233 regulator-min-microvolt = <3300000>;
234 regulator-max-microvolt = <3300000>;
235 regulator-always-on;
236 };
237
238 vdd10_lcd: REG6 {
239 regulator-name = "vdd10_lcd";
240 regulator-min-microvolt = <1000000>;
241 regulator-max-microvolt = <1000000>;
242 regulator-always-on;
243 };
244
245 vcca_18: REG7 {
246 regulator-name = "vcca_18";
247 regulator-min-microvolt = <1800000>;
248 regulator-max-microvolt = <1800000>;
249 };
250
251 vcca_33: REG8 {
252 regulator-name = "vcca_33";
253 regulator-min-microvolt = <3300000>;
254 regulator-max-microvolt = <3300000>;
255 };
256
257 vcc_lan: REG9 {
258 regulator-name = "vcc_lan";
259 regulator-min-microvolt = <3300000>;
260 regulator-max-microvolt = <3300000>;
261 };
262
263 vdd_10: REG10 {
264 regulator-name = "vdd_10";
265 regulator-min-microvolt = <1000000>;
266 regulator-max-microvolt = <1000000>;
267 regulator-always-on;
268 };
269
270 vcc_18: REG11 {
271 regulator-name = "vcc_18";
272 regulator-min-microvolt = <1800000>;
273 regulator-max-microvolt = <1800000>;
274 regulator-always-on;
275 };
276
277 vcc18_lcd: REG12 {
278 regulator-name = "vcc18_lcd";
279 regulator-min-microvolt = <1800000>;
280 regulator-max-microvolt = <1800000>;
281 regulator-always-on;
282 };
283 };
284 };
285 };
286
287 &i2c1 {
288 status = "okay";
289 };
290
291 &i2c2 {
292 status = "okay";
293 };
294
295 &i2c4 {
296 status = "okay";
297 };
298
299 &i2c5 {
300 status = "okay";
301 };
302
303 &i2s {
304 #sound-dai-cells = <0>;
305 status = "okay";
306 };
307
308 &io_domains {
309 status = "okay";
310
311 audio-supply = <&vcca_33>;
312 flash0-supply = <&vcc_flash>;
313 flash1-supply = <&vcc_lan>;
314 gpio30-supply = <&vcc_io>;
315 gpio1830-supply = <&vcc_io>;
316 lcdc-supply = <&vcc_io>;
317 sdcard-supply = <&vccio_sd>;
318 wifi-supply = <&vcc_18>;
319 };
320
321 &pinctrl {
322 pcfg_output_high: pcfg-output-high {
323 output-high;
324 };
325
326 pcfg_output_low: pcfg-output-low {
327 output-low;
328 };
329
330 pcfg_pull_up_drv_12ma: pcfg-pull-up-drv-12ma {
331 bias-pull-up;
332 drive-strength = <12>;
333 };
334
335 act8846 {
336 pmic_int: pmic-int {
337 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
338 };
339
340 pmic_sleep: pmic-sleep {
341 rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_output_low>;
342 };
343
344 pmic_vsel: pmic-vsel {
345 rockchip,pins = <7 RK_PA1 RK_FUNC_GPIO &pcfg_output_low>;
346 };
347 };
348
349 gmac {
350 phy_int: phy-int {
351 rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
352 };
353
354 phy_pmeb: phy-pmeb {
355 rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
356 };
357
358 phy_rst: phy-rst {
359 rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
360 };
361 };
362
363 sdmmc {
364 /*
365 * Default drive strength isn't enough to achieve even
366 * high-speed mode on firefly board so bump up to 12ma.
367 */
368 sdmmc_bus4: sdmmc-bus4 {
369 rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_12ma>,
370 <6 RK_PC1 1 &pcfg_pull_up_drv_12ma>,
371 <6 RK_PC2 1 &pcfg_pull_up_drv_12ma>,
372 <6 RK_PC3 1 &pcfg_pull_up_drv_12ma>;
373 };
374
375 sdmmc_clk: sdmmc-clk {
376 rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_12ma>;
377 };
378
379 sdmmc_cmd: sdmmc-cmd {
380 rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_12ma>;
381 };
382
383 sdmmc_pwr: sdmmc-pwr {
384 rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
385 };
386 };
387
388 usb_host {
389 host_vbus_drv: host-vbus-drv {
390 rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
391 };
392 };
393 };
394
395 &saradc {
396 vref-supply = <&vcc_18>;
397 status = "okay";
398 };
399
400 &sdmmc {
401 bus-width = <4>;
402 cap-mmc-highspeed;
403 cap-sd-highspeed;
404 card-detect-delay = <200>;
405 disable-wp;
406 pinctrl-names = "default";
407 pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
408 vmmc-supply = <&vcc_sd>;
409 vqmmc-supply = <&vccio_sd>;
410 status = "okay";
411 };
412
413 &tsadc {
414 rockchip,hw-tshut-mode = <0>;
415 rockchip,hw-tshut-polarity = <0>;
416 status = "okay";
417 };
418
419 &uart2 {
420 status = "okay";
421 };
422
423 &uart3 {
424 status = "okay";
425 };
426
427 &usbphy {
428 status = "okay";
429 };
430
431 &usb_host1 {
432 status = "okay";
433 };
434
435 &usb_otg {
436 /*
437 * The otg controller is the only system power source,
438 * so needs to always stay in device mode.
439 */
440 dr_mode = "peripheral";
441 status = "okay";
442 };
443
444 &vopb {
445 status = "okay";
446 };
447
448 &vopb_mmu {
449 status = "okay";
450 };
451
452 &vopl {
453 status = "okay";
454 };
455
456 &vopl_mmu {
457 status = "okay";
458 };
459
460 &wdt {
461 status = "okay";
462 };