| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/* |
| 4 |
* Copyright (C) 2018 O.S. Systems Software LTDA. |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
|
| 9 |
#include "rv1108.dtsi" |
| 10 |
|
| 11 |
/ { |
| 12 |
model = "Elgin RV1108 R1 board"; |
| 13 |
compatible = "elgin,rv1108-r1", "rockchip,rv1108"; |
| 14 |
|
| 15 |
aliases { |
| 16 |
mmc0 = &emmc; |
| 17 |
}; |
| 18 |
|
| 19 |
memory@60000000 { |
| 20 |
device_type = "memory"; |
| 21 |
reg = <0x60000000 0x08000000>; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen { |
| 25 |
stdout-path = "serial2:1500000n8"; |
| 26 |
}; |
| 27 |
|
| 28 |
vcc_sys: regulator-vsys { |
| 29 |
compatible = "regulator-fixed"; |
| 30 |
regulator-name = "vsys"; |
| 31 |
regulator-min-microvolt = <5000000>; |
| 32 |
regulator-max-microvolt = <5000000>; |
| 33 |
regulator-boot-on; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
&cpu0 { |
| 38 |
cpu-supply = <&vdd_core>; |
| 39 |
}; |
| 40 |
|
| 41 |
&emmc { |
| 42 |
bus-width = <8>; |
| 43 |
cap-mmc-highspeed; |
| 44 |
no-sd; |
| 45 |
no-sdio; |
| 46 |
non-removable; |
| 47 |
mmc-ddr-1_8v; |
| 48 |
mmc-hs200-1_8v; |
| 49 |
pinctrl-names = "default"; |
| 50 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
| 51 |
status = "okay"; |
| 52 |
}; |
| 53 |
|
| 54 |
&gmac { |
| 55 |
clock_in_out = "output"; |
| 56 |
pinctrl-names = "default"; |
| 57 |
pinctrl-0 = <&rmii_pins>; |
| 58 |
snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>; |
| 59 |
snps,reset-active-low; |
| 60 |
status = "okay"; |
| 61 |
}; |
| 62 |
|
| 63 |
&i2c0 { |
| 64 |
clock-frequency = <400000>; |
| 65 |
i2c-scl-rising-time-ns = <275>; |
| 66 |
i2c-scl-falling-time-ns = <16>; |
| 67 |
status = "okay"; |
| 68 |
|
| 69 |
rk805: pmic@18 { |
| 70 |
compatible = "rockchip,rk805"; |
| 71 |
reg = <0x18>; |
| 72 |
interrupt-parent = <&gpio0>; |
| 73 |
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>; |
| 74 |
rockchip,system-power-controller; |
| 75 |
#clock-cells = <0>; |
| 76 |
|
| 77 |
vcc1-supply = <&vcc_sys>; |
| 78 |
vcc2-supply = <&vcc_sys>; |
| 79 |
vcc3-supply = <&vcc_sys>; |
| 80 |
vcc4-supply = <&vcc_sys>; |
| 81 |
vcc5-supply = <&vdd_buck2>; |
| 82 |
vcc6-supply = <&vdd_buck2>; |
| 83 |
|
| 84 |
regulators { |
| 85 |
vdd_core: DCDC_REG1 { |
| 86 |
regulator-name = "vdd_core"; |
| 87 |
regulator-min-microvolt = <700000>; |
| 88 |
regulator-max-microvolt = <1500000>; |
| 89 |
regulator-always-on; |
| 90 |
regulator-boot-on; |
| 91 |
regulator-state-mem { |
| 92 |
regulator-on-in-suspend; |
| 93 |
regulator-suspend-microvolt = <900000>; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
vdd_buck2: DCDC_REG2 { |
| 98 |
regulator-name = "vdd_buck2"; |
| 99 |
regulator-min-microvolt = <2200000>; |
| 100 |
regulator-max-microvolt = <2200000>; |
| 101 |
regulator-always-on; |
| 102 |
regulator-boot-on; |
| 103 |
regulator-state-mem { |
| 104 |
regulator-off-in-suspend; |
| 105 |
}; |
| 106 |
}; |
| 107 |
|
| 108 |
vcc_ddr: DCDC_REG3 { |
| 109 |
regulator-name = "vcc_ddr"; |
| 110 |
regulator-always-on; |
| 111 |
regulator-boot-on; |
| 112 |
regulator-state-mem { |
| 113 |
regulator-on-in-suspend; |
| 114 |
}; |
| 115 |
}; |
| 116 |
|
| 117 |
vcc_io: DCDC_REG4 { |
| 118 |
regulator-name = "vcc_io"; |
| 119 |
regulator-min-microvolt = <3300000>; |
| 120 |
regulator-max-microvolt = <3300000>; |
| 121 |
regulator-always-on; |
| 122 |
regulator-boot-on; |
| 123 |
regulator-state-mem { |
| 124 |
regulator-on-in-suspend; |
| 125 |
regulator-suspend-microvolt = <3300000>; |
| 126 |
}; |
| 127 |
}; |
| 128 |
|
| 129 |
vdd_10: LDO_REG1 { |
| 130 |
regulator-name = "vdd_10"; |
| 131 |
regulator-min-microvolt = <1000000>; |
| 132 |
regulator-max-microvolt = <1000000>; |
| 133 |
regulator-always-on; |
| 134 |
regulator-boot-on; |
| 135 |
regulator-state-mem { |
| 136 |
regulator-off-in-suspend; |
| 137 |
}; |
| 138 |
}; |
| 139 |
|
| 140 |
vcc_18: LDO_REG2 { |
| 141 |
regulator-name = "vcc_18"; |
| 142 |
regulator-min-microvolt = <1800000>; |
| 143 |
regulator-max-microvolt = <1800000>; |
| 144 |
regulator-always-on; |
| 145 |
regulator-boot-on; |
| 146 |
regulator-state-mem { |
| 147 |
regulator-off-in-suspend; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
vdd10_pmu: LDO_REG3 { |
| 152 |
regulator-name = "vdd10_pmu"; |
| 153 |
regulator-min-microvolt = <1000000>; |
| 154 |
regulator-max-microvolt = <1000000>; |
| 155 |
regulator-always-on; |
| 156 |
regulator-boot-on; |
| 157 |
regulator-state-mem { |
| 158 |
regulator-on-in-suspend; |
| 159 |
regulator-suspend-microvolt = <1000000>; |
| 160 |
}; |
| 161 |
}; |
| 162 |
}; |
| 163 |
}; |
| 164 |
}; |
| 165 |
|
| 166 |
&spi { |
| 167 |
pinctrl-names = "default"; |
| 168 |
pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>; |
| 169 |
status = "okay"; |
| 170 |
|
| 171 |
display: display@0 { |
| 172 |
compatible = "elgin,jg10309-01"; |
| 173 |
reg = <0>; |
| 174 |
spi-max-frequency = <24000000>; |
| 175 |
spi-cpha; |
| 176 |
spi-cpol; |
| 177 |
}; |
| 178 |
}; |
| 179 |
|
| 180 |
&u2phy { |
| 181 |
status = "okay"; |
| 182 |
|
| 183 |
u2phy_host: host-port { |
| 184 |
status = "okay"; |
| 185 |
}; |
| 186 |
|
| 187 |
u2phy_otg: otg-port { |
| 188 |
status = "okay"; |
| 189 |
}; |
| 190 |
}; |
| 191 |
|
| 192 |
&uart0 { |
| 193 |
pinctrl-names = "default"; |
| 194 |
pinctrl-0 = <&uart0_xfer>; |
| 195 |
status = "okay"; |
| 196 |
}; |
| 197 |
|
| 198 |
&uart2 { |
| 199 |
status = "okay"; |
| 200 |
}; |
| 201 |
|
| 202 |
&usb_host_ehci { |
| 203 |
status = "okay"; |
| 204 |
}; |
| 205 |
|
| 206 |
&usb_host_ohci { |
| 207 |
status = "okay"; |
| 208 |
}; |
| 209 |
|
| 210 |
&usb_otg { |
| 211 |
status = "okay"; |
| 212 |
}; |