| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/input/input.h> |
| 6 |
#include "rk3229.dtsi" |
| 7 |
|
| 8 |
/ { |
| 9 |
model = "Mecer Xtreme Mini S6"; |
| 10 |
compatible = "mecer,xms6", "rockchip,rk3229"; |
| 11 |
|
| 12 |
aliases { |
| 13 |
mmc0 = &sdmmc; |
| 14 |
mmc1 = &sdio; |
| 15 |
mmc2 = &emmc; |
| 16 |
}; |
| 17 |
|
| 18 |
memory@60000000 { |
| 19 |
device_type = "memory"; |
| 20 |
reg = <0x60000000 0x40000000>; |
| 21 |
}; |
| 22 |
|
| 23 |
dc_12v: regulator-dc-12v { |
| 24 |
compatible = "regulator-fixed"; |
| 25 |
regulator-name = "dc_12v"; |
| 26 |
regulator-always-on; |
| 27 |
regulator-boot-on; |
| 28 |
regulator-min-microvolt = <12000000>; |
| 29 |
regulator-max-microvolt = <12000000>; |
| 30 |
}; |
| 31 |
|
| 32 |
ext_gmac: ext_gmac { |
| 33 |
compatible = "fixed-clock"; |
| 34 |
clock-frequency = <125000000>; |
| 35 |
clock-output-names = "ext_gmac"; |
| 36 |
#clock-cells = <0>; |
| 37 |
}; |
| 38 |
|
| 39 |
power-led { |
| 40 |
compatible = "gpio-leds"; |
| 41 |
|
| 42 |
blue_led: led-0 { |
| 43 |
gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; |
| 44 |
default-state = "on"; |
| 45 |
}; |
| 46 |
}; |
| 47 |
|
| 48 |
sdio_pwrseq: sdio-pwrseq { |
| 49 |
compatible = "mmc-pwrseq-simple"; |
| 50 |
reset-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, |
| 51 |
<&gpio2 29 GPIO_ACTIVE_LOW>; |
| 52 |
}; |
| 53 |
|
| 54 |
vcc_host: regulator-vcc-host { |
| 55 |
compatible = "regulator-fixed"; |
| 56 |
enable-active-high; |
| 57 |
gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; |
| 58 |
pinctrl-names = "default"; |
| 59 |
pinctrl-0 = <&host_vbus_drv>; |
| 60 |
regulator-name = "vcc_host"; |
| 61 |
regulator-always-on; |
| 62 |
regulator-boot-on; |
| 63 |
vin-supply = <&vcc_sys>; |
| 64 |
}; |
| 65 |
|
| 66 |
vcc_phy: regulator-vcc-phy { |
| 67 |
compatible = "regulator-fixed"; |
| 68 |
enable-active-high; |
| 69 |
regulator-name = "vcc_phy"; |
| 70 |
regulator-min-microvolt = <1800000>; |
| 71 |
regulator-max-microvolt = <1800000>; |
| 72 |
regulator-always-on; |
| 73 |
regulator-boot-on; |
| 74 |
vin-supply = <&vccio_1v8>; |
| 75 |
}; |
| 76 |
|
| 77 |
vcc_sys: regulator-vcc-sys { |
| 78 |
compatible = "regulator-fixed"; |
| 79 |
regulator-name = "vcc_sys"; |
| 80 |
regulator-always-on; |
| 81 |
regulator-boot-on; |
| 82 |
regulator-min-microvolt = <5000000>; |
| 83 |
regulator-max-microvolt = <5000000>; |
| 84 |
vin-supply = <&dc_12v>; |
| 85 |
}; |
| 86 |
|
| 87 |
vccio_1v8: regulator-vccio-1v8 { |
| 88 |
compatible = "regulator-fixed"; |
| 89 |
regulator-name = "vccio_1v8"; |
| 90 |
regulator-min-microvolt = <1800000>; |
| 91 |
regulator-max-microvolt = <1800000>; |
| 92 |
regulator-always-on; |
| 93 |
vin-supply = <&vcc_sys>; |
| 94 |
}; |
| 95 |
|
| 96 |
vccio_3v3: regulator-vccio-3v3 { |
| 97 |
compatible = "regulator-fixed"; |
| 98 |
regulator-name = "vccio_3v3"; |
| 99 |
regulator-min-microvolt = <3300000>; |
| 100 |
regulator-max-microvolt = <3300000>; |
| 101 |
regulator-always-on; |
| 102 |
vin-supply = <&vcc_sys>; |
| 103 |
}; |
| 104 |
|
| 105 |
vdd_arm: regulator-vdd-arm { |
| 106 |
compatible = "pwm-regulator"; |
| 107 |
pwms = <&pwm1 0 25000 1>; |
| 108 |
pwm-supply = <&vcc_sys>; |
| 109 |
regulator-name = "vdd_arm"; |
| 110 |
regulator-min-microvolt = <950000>; |
| 111 |
regulator-max-microvolt = <1400000>; |
| 112 |
regulator-always-on; |
| 113 |
regulator-boot-on; |
| 114 |
}; |
| 115 |
|
| 116 |
vdd_log: regulator-vdd-log { |
| 117 |
compatible = "pwm-regulator"; |
| 118 |
pwms = <&pwm2 0 25000 1>; |
| 119 |
pwm-supply = <&vcc_sys>; |
| 120 |
regulator-name = "vdd_log"; |
| 121 |
regulator-min-microvolt = <1000000>; |
| 122 |
regulator-max-microvolt = <1300000>; |
| 123 |
regulator-always-on; |
| 124 |
regulator-boot-on; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
&cpu0 { |
| 129 |
cpu-supply = <&vdd_arm>; |
| 130 |
}; |
| 131 |
|
| 132 |
&cpu1 { |
| 133 |
cpu-supply = <&vdd_arm>; |
| 134 |
}; |
| 135 |
|
| 136 |
&cpu2 { |
| 137 |
cpu-supply = <&vdd_arm>; |
| 138 |
}; |
| 139 |
|
| 140 |
&cpu3 { |
| 141 |
cpu-supply = <&vdd_arm>; |
| 142 |
}; |
| 143 |
|
| 144 |
&emmc { |
| 145 |
cap-mmc-highspeed; |
| 146 |
non-removable; |
| 147 |
status = "okay"; |
| 148 |
}; |
| 149 |
|
| 150 |
&gmac { |
| 151 |
assigned-clocks = <&cru SCLK_MAC_SRC>; |
| 152 |
assigned-clock-rates = <50000000>; |
| 153 |
clock_in_out = "output"; |
| 154 |
phy-handle = <&phy>; |
| 155 |
phy-mode = "rmii"; |
| 156 |
phy-supply = <&vcc_phy>; |
| 157 |
status = "okay"; |
| 158 |
|
| 159 |
mdio { |
| 160 |
compatible = "snps,dwmac-mdio"; |
| 161 |
#address-cells = <1>; |
| 162 |
#size-cells = <0>; |
| 163 |
|
| 164 |
phy: ethernet-phy@0 { |
| 165 |
compatible = "ethernet-phy-id1234.d400", |
| 166 |
"ethernet-phy-ieee802.3-c22"; |
| 167 |
reg = <0>; |
| 168 |
clocks = <&cru SCLK_MAC_PHY>; |
| 169 |
phy-is-integrated; |
| 170 |
resets = <&cru SRST_MACPHY>; |
| 171 |
}; |
| 172 |
}; |
| 173 |
}; |
| 174 |
|
| 175 |
&gpu { |
| 176 |
mali-supply = <&vdd_log>; |
| 177 |
status = "okay"; |
| 178 |
}; |
| 179 |
|
| 180 |
&hdmi { |
| 181 |
status = "okay"; |
| 182 |
}; |
| 183 |
|
| 184 |
&hdmi_phy { |
| 185 |
status = "okay"; |
| 186 |
}; |
| 187 |
|
| 188 |
&iep_mmu { |
| 189 |
status = "okay"; |
| 190 |
}; |
| 191 |
|
| 192 |
&io_domains { |
| 193 |
status = "okay"; |
| 194 |
|
| 195 |
vccio1-supply = <&vccio_3v3>; |
| 196 |
vccio2-supply = <&vccio_1v8>; |
| 197 |
vccio4-supply = <&vccio_3v3>; |
| 198 |
}; |
| 199 |
|
| 200 |
&pinctrl { |
| 201 |
usb { |
| 202 |
host_vbus_drv: host-vbus-drv { |
| 203 |
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 204 |
}; |
| 205 |
}; |
| 206 |
}; |
| 207 |
|
| 208 |
&pwm1 { |
| 209 |
status = "okay"; |
| 210 |
}; |
| 211 |
|
| 212 |
&pwm2 { |
| 213 |
status = "okay"; |
| 214 |
}; |
| 215 |
|
| 216 |
&sdio { |
| 217 |
bus-width = <4>; |
| 218 |
cap-sd-highspeed; |
| 219 |
cap-sdio-irq; |
| 220 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 221 |
non-removable; |
| 222 |
vqmmc-supply = <&vccio_1v8>; |
| 223 |
status = "okay"; |
| 224 |
}; |
| 225 |
|
| 226 |
&sdmmc { |
| 227 |
cap-mmc-highspeed; |
| 228 |
disable-wp; |
| 229 |
status = "okay"; |
| 230 |
}; |
| 231 |
|
| 232 |
&tsadc { |
| 233 |
rockchip,hw-tshut-mode = <0>; |
| 234 |
status = "okay"; |
| 235 |
}; |
| 236 |
|
| 237 |
&u2phy0 { |
| 238 |
status = "okay"; |
| 239 |
|
| 240 |
u2phy0_host: host-port { |
| 241 |
phy-supply = <&vcc_host>; |
| 242 |
status = "okay"; |
| 243 |
}; |
| 244 |
|
| 245 |
u2phy0_otg: otg-port { |
| 246 |
phy-supply = <&vcc_host>; |
| 247 |
status = "okay"; |
| 248 |
}; |
| 249 |
}; |
| 250 |
|
| 251 |
&u2phy1 { |
| 252 |
status = "okay"; |
| 253 |
|
| 254 |
u2phy1_host: host-port { |
| 255 |
phy-supply = <&vcc_host>; |
| 256 |
status = "okay"; |
| 257 |
}; |
| 258 |
|
| 259 |
u2phy1_otg: otg-port { |
| 260 |
phy-supply = <&vcc_host>; |
| 261 |
status = "okay"; |
| 262 |
}; |
| 263 |
}; |
| 264 |
|
| 265 |
&uart2 { |
| 266 |
pinctrl-0 = <&uart21_xfer>; |
| 267 |
status = "okay"; |
| 268 |
}; |
| 269 |
|
| 270 |
&usb_host0_ehci { |
| 271 |
status = "okay"; |
| 272 |
}; |
| 273 |
|
| 274 |
&usb_host0_ohci { |
| 275 |
status = "okay"; |
| 276 |
}; |
| 277 |
|
| 278 |
&usb_host1_ehci { |
| 279 |
status = "okay"; |
| 280 |
}; |
| 281 |
|
| 282 |
&usb_host1_ohci { |
| 283 |
status = "okay"; |
| 284 |
}; |
| 285 |
|
| 286 |
&usb_host2_ehci { |
| 287 |
status = "okay"; |
| 288 |
}; |
| 289 |
|
| 290 |
&usb_host2_ohci { |
| 291 |
status = "okay"; |
| 292 |
}; |
| 293 |
|
| 294 |
&usb_otg { |
| 295 |
status = "okay"; |
| 296 |
}; |
| 297 |
|
| 298 |
&vop { |
| 299 |
status = "okay"; |
| 300 |
}; |
| 301 |
|
| 302 |
&vop_mmu { |
| 303 |
status = "okay"; |
| 304 |
}; |