| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd |
| 4 |
* Copyright (c) 2019 Radxa Limited |
| 5 |
* Copyright (c) 2019 Amarula Solutions(India) |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/pwm/pwm.h> |
| 9 |
|
| 10 |
/ { |
| 11 |
clkin_gmac: external-gmac-clock { |
| 12 |
compatible = "fixed-clock"; |
| 13 |
clock-frequency = <125000000>; |
| 14 |
clock-output-names = "clkin_gmac"; |
| 15 |
#clock-cells = <0>; |
| 16 |
}; |
| 17 |
|
| 18 |
sdio_pwrseq: sdio-pwrseq { |
| 19 |
compatible = "mmc-pwrseq-simple"; |
| 20 |
clocks = <&hym8563>; |
| 21 |
clock-names = "ext_clock"; |
| 22 |
pinctrl-names = "default"; |
| 23 |
pinctrl-0 = <&wifi_enable_h>; |
| 24 |
}; |
| 25 |
|
| 26 |
vcc12v_dcin: regulator-vcc12v-dcin { |
| 27 |
compatible = "regulator-fixed"; |
| 28 |
regulator-name = "vcc12v_dcin"; |
| 29 |
regulator-always-on; |
| 30 |
regulator-boot-on; |
| 31 |
regulator-min-microvolt = <12000000>; |
| 32 |
regulator-max-microvolt = <12000000>; |
| 33 |
}; |
| 34 |
|
| 35 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 36 |
compatible = "regulator-fixed"; |
| 37 |
regulator-name = "vcc5v0_sys"; |
| 38 |
regulator-always-on; |
| 39 |
regulator-boot-on; |
| 40 |
regulator-min-microvolt = <5000000>; |
| 41 |
regulator-max-microvolt = <5000000>; |
| 42 |
vin-supply = <&vcc12v_dcin>; |
| 43 |
}; |
| 44 |
|
| 45 |
vbus_host: regulator-vbus-host { |
| 46 |
compatible = "regulator-fixed"; |
| 47 |
pinctrl-names = "default"; |
| 48 |
pinctrl-0 = <&usb1_en_oc>; |
| 49 |
regulator-name = "vbus_host"; /* HOST-5V */ |
| 50 |
regulator-always-on; |
| 51 |
vin-supply = <&vcc5v0_sys>; |
| 52 |
}; |
| 53 |
|
| 54 |
vbus_typec: regulator-vbus-typec { |
| 55 |
compatible = "regulator-fixed"; |
| 56 |
pinctrl-names = "default"; |
| 57 |
pinctrl-0 = <&usb0_en_oc>; |
| 58 |
regulator-name = "vbus_typec"; |
| 59 |
regulator-always-on; |
| 60 |
vin-supply = <&vcc5v0_sys>; |
| 61 |
}; |
| 62 |
}; |
| 63 |
|
| 64 |
&gmac { |
| 65 |
assigned-clock-parents = <&clkin_gmac>; |
| 66 |
clock_in_out = "input"; |
| 67 |
phy-mode = "rgmii"; |
| 68 |
pinctrl-names = "default"; |
| 69 |
pinctrl-0 = <&rgmii_pins>; |
| 70 |
snps,reset-active-low; |
| 71 |
snps,reset-delays-us = <0 10000 50000>; |
| 72 |
tx_delay = <0x28>; |
| 73 |
rx_delay = <0x11>; |
| 74 |
status = "okay"; |
| 75 |
}; |
| 76 |
|
| 77 |
&hdmi { |
| 78 |
status = "okay"; |
| 79 |
}; |
| 80 |
|
| 81 |
&pwm0 { |
| 82 |
status = "okay"; |
| 83 |
}; |
| 84 |
|
| 85 |
&pwm2 { |
| 86 |
status = "okay"; |
| 87 |
}; |
| 88 |
|
| 89 |
&sdio0 { |
| 90 |
bus-width = <4>; |
| 91 |
cap-sd-highspeed; |
| 92 |
cap-sdio-irq; |
| 93 |
keep-power-in-suspend; |
| 94 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 95 |
non-removable; |
| 96 |
pinctrl-names = "default"; |
| 97 |
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; |
| 98 |
sd-uhs-sdr104; |
| 99 |
status = "okay"; |
| 100 |
}; |
| 101 |
|
| 102 |
&sdmmc { |
| 103 |
bus-width = <4>; |
| 104 |
cap-mmc-highspeed; |
| 105 |
cap-sd-highspeed; |
| 106 |
disable-wp; |
| 107 |
vqmmc-supply = <&vccio_sd>; |
| 108 |
pinctrl-names = "default"; |
| 109 |
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; |
| 110 |
status = "okay"; |
| 111 |
}; |
| 112 |
|
| 113 |
&uart0 { |
| 114 |
pinctrl-names = "default"; |
| 115 |
pinctrl-0 = <&uart0_xfer &uart0_cts>; |
| 116 |
status = "okay"; |
| 117 |
}; |
| 118 |
|
| 119 |
&uart2 { |
| 120 |
status = "okay"; |
| 121 |
}; |
| 122 |
|
| 123 |
&vopb { |
| 124 |
status = "okay"; |
| 125 |
}; |
| 126 |
|
| 127 |
&vopb_mmu { |
| 128 |
status = "okay"; |
| 129 |
}; |
| 130 |
|
| 131 |
&vopl { |
| 132 |
status = "okay"; |
| 133 |
}; |
| 134 |
|
| 135 |
&vopl_mmu { |
| 136 |
status = "okay"; |
| 137 |
}; |