| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2016 Andy Yan <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include <dt-bindings/input/input.h> |
| 8 |
#include "rk3188.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Rockchip PX3-EVB"; |
| 12 |
compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
mmc0 = &mmc0; |
| 16 |
mmc1 = &emmc; |
| 17 |
}; |
| 18 |
|
| 19 |
chosen { |
| 20 |
stdout-path = "serial2:115200n8"; |
| 21 |
}; |
| 22 |
|
| 23 |
memory@60000000 { |
| 24 |
reg = <0x60000000 0x80000000>; |
| 25 |
device_type = "memory"; |
| 26 |
}; |
| 27 |
|
| 28 |
gpio-keys { |
| 29 |
compatible = "gpio-keys"; |
| 30 |
autorepeat; |
| 31 |
|
| 32 |
key-power { |
| 33 |
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| 34 |
linux,code = <KEY_POWER>; |
| 35 |
label = "GPIO Key Power"; |
| 36 |
linux,input-type = <1>; |
| 37 |
wakeup-source; |
| 38 |
debounce-interval = <100>; |
| 39 |
}; |
| 40 |
}; |
| 41 |
|
| 42 |
vcc_sys: regulator-vsys { |
| 43 |
compatible = "regulator-fixed"; |
| 44 |
regulator-name = "vsys"; |
| 45 |
regulator-min-microvolt = <5000000>; |
| 46 |
regulator-max-microvolt = <5000000>; |
| 47 |
regulator-boot-on; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
&cpu0 { |
| 52 |
cpu-supply = <&vdd_cpu>; |
| 53 |
}; |
| 54 |
|
| 55 |
&cpu1 { |
| 56 |
cpu-supply = <&vdd_cpu>; |
| 57 |
}; |
| 58 |
|
| 59 |
&cpu2 { |
| 60 |
cpu-supply = <&vdd_cpu>; |
| 61 |
}; |
| 62 |
|
| 63 |
&cpu3 { |
| 64 |
cpu-supply = <&vdd_cpu>; |
| 65 |
}; |
| 66 |
|
| 67 |
&emmc { |
| 68 |
bus-width = <8>; |
| 69 |
cap-mmc-highspeed; |
| 70 |
non-removable; |
| 71 |
pinctrl-names = "default"; |
| 72 |
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; |
| 73 |
status = "okay"; |
| 74 |
}; |
| 75 |
|
| 76 |
&i2c0 { |
| 77 |
status = "okay"; |
| 78 |
|
| 79 |
accelerometer@18 { |
| 80 |
compatible = "bosch,bma250"; |
| 81 |
reg = <0x18>; |
| 82 |
interrupt-parent = <&gpio0>; |
| 83 |
interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>; |
| 84 |
}; |
| 85 |
}; |
| 86 |
|
| 87 |
&i2c1 { |
| 88 |
status = "okay"; |
| 89 |
clock-frequency = <400000>; |
| 90 |
|
| 91 |
rk808: pmic@1c { |
| 92 |
compatible = "rockchip,rk818"; |
| 93 |
reg = <0x1c>; |
| 94 |
interrupt-parent = <&gpio0>; |
| 95 |
interrupts = <RK_PB3 IRQ_TYPE_LEVEL_LOW>; |
| 96 |
rockchip,system-power-controller; |
| 97 |
wakeup-source; |
| 98 |
#clock-cells = <1>; |
| 99 |
clock-output-names = "xin32k", "rk808-clkout2"; |
| 100 |
|
| 101 |
vcc1-supply = <&vcc_sys>; |
| 102 |
vcc2-supply = <&vcc_sys>; |
| 103 |
vcc3-supply = <&vcc_sys>; |
| 104 |
vcc4-supply = <&vcc_sys>; |
| 105 |
vcc6-supply = <&vcc_sys>; |
| 106 |
vcc7-supply = <&vcc_sys>; |
| 107 |
vcc8-supply = <&vcc_io>; |
| 108 |
vcc9-supply = <&vcc_io>; |
| 109 |
|
| 110 |
regulators { |
| 111 |
vdd_cpu: DCDC_REG1 { |
| 112 |
regulator-always-on; |
| 113 |
regulator-boot-on; |
| 114 |
regulator-min-microvolt = <750000>; |
| 115 |
regulator-max-microvolt = <1350000>; |
| 116 |
regulator-name = "vdd_arm"; |
| 117 |
regulator-state-mem { |
| 118 |
regulator-off-in-suspend; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
vdd_gpu: DCDC_REG2 { |
| 123 |
regulator-always-on; |
| 124 |
regulator-boot-on; |
| 125 |
regulator-min-microvolt = <850000>; |
| 126 |
regulator-max-microvolt = <1250000>; |
| 127 |
regulator-name = "vdd_gpu"; |
| 128 |
regulator-state-mem { |
| 129 |
regulator-on-in-suspend; |
| 130 |
regulator-suspend-microvolt = <1000000>; |
| 131 |
}; |
| 132 |
}; |
| 133 |
|
| 134 |
vcc_ddr: DCDC_REG3 { |
| 135 |
regulator-always-on; |
| 136 |
regulator-boot-on; |
| 137 |
regulator-name = "vcc_ddr"; |
| 138 |
regulator-state-mem { |
| 139 |
regulator-on-in-suspend; |
| 140 |
}; |
| 141 |
}; |
| 142 |
|
| 143 |
vcc_io: DCDC_REG4 { |
| 144 |
regulator-always-on; |
| 145 |
regulator-boot-on; |
| 146 |
regulator-min-microvolt = <3300000>; |
| 147 |
regulator-max-microvolt = <3300000>; |
| 148 |
regulator-name = "vcc_io"; |
| 149 |
regulator-state-mem { |
| 150 |
regulator-on-in-suspend; |
| 151 |
regulator-suspend-microvolt = <3300000>; |
| 152 |
}; |
| 153 |
}; |
| 154 |
|
| 155 |
vcc_cif: LDO_REG1 { |
| 156 |
regulator-min-microvolt = <3300000>; |
| 157 |
regulator-max-microvolt = <3300000>; |
| 158 |
regulator-name = "vcc_cif"; |
| 159 |
}; |
| 160 |
|
| 161 |
vcc_jetta33: LDO_REG2 { |
| 162 |
regulator-always-on; |
| 163 |
regulator-boot-on; |
| 164 |
regulator-min-microvolt = <3300000>; |
| 165 |
regulator-max-microvolt = <3300000>; |
| 166 |
regulator-name = "vcc_jetta33"; |
| 167 |
}; |
| 168 |
|
| 169 |
vdd_10: LDO_REG3 { |
| 170 |
regulator-always-on; |
| 171 |
regulator-boot-on; |
| 172 |
regulator-min-microvolt = <1000000>; |
| 173 |
regulator-max-microvolt = <1000000>; |
| 174 |
regulator-name = "vdd_10"; |
| 175 |
regulator-state-mem { |
| 176 |
regulator-on-in-suspend; |
| 177 |
regulator-suspend-microvolt = <1000000>; |
| 178 |
}; |
| 179 |
}; |
| 180 |
|
| 181 |
lvds_12: LDO_REG4 { |
| 182 |
regulator-min-microvolt = <1800000>; |
| 183 |
regulator-max-microvolt = <1800000>; |
| 184 |
regulator-name = "lvds_12"; |
| 185 |
}; |
| 186 |
|
| 187 |
lvds_25: LDO_REG5 { |
| 188 |
regulator-min-microvolt = <1800000>; |
| 189 |
regulator-max-microvolt = <3300000>; |
| 190 |
regulator-name = "lvds_25"; |
| 191 |
}; |
| 192 |
|
| 193 |
cif_18: LDO_REG6 { |
| 194 |
regulator-min-microvolt = <1000000>; |
| 195 |
regulator-max-microvolt = <1000000>; |
| 196 |
regulator-name = "cif_18"; |
| 197 |
}; |
| 198 |
|
| 199 |
vcc_sd: LDO_REG7 { |
| 200 |
regulator-min-microvolt = <1800000>; |
| 201 |
regulator-max-microvolt = <3300000>; |
| 202 |
regulator-name = "vcc_sd"; |
| 203 |
regulator-state-mem { |
| 204 |
regulator-on-in-suspend; |
| 205 |
regulator-suspend-microvolt = <3300000>; |
| 206 |
}; |
| 207 |
}; |
| 208 |
|
| 209 |
wl_18: LDO_REG8 { |
| 210 |
regulator-min-microvolt = <1800000>; |
| 211 |
regulator-max-microvolt = <3300000>; |
| 212 |
regulator-name = "wl_18"; |
| 213 |
}; |
| 214 |
|
| 215 |
lcd_33: SWITCH_REG { |
| 216 |
regulator-name = "lcd_33"; |
| 217 |
}; |
| 218 |
}; |
| 219 |
}; |
| 220 |
|
| 221 |
}; |
| 222 |
|
| 223 |
&i2c2 { |
| 224 |
gsl1680: touchscreen@40 { |
| 225 |
compatible = "silead,gsl1680"; |
| 226 |
reg = <0x40>; |
| 227 |
interrupt-parent = <&gpio1>; |
| 228 |
interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; |
| 229 |
power-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; |
| 230 |
touchscreen-size-x = <800>; |
| 231 |
touchscreen-size-y = <1280>; |
| 232 |
silead,max-fingers = <5>; |
| 233 |
}; |
| 234 |
}; |
| 235 |
|
| 236 |
&mmc0 { |
| 237 |
status = "okay"; |
| 238 |
pinctrl-names = "default"; |
| 239 |
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; |
| 240 |
vmmc-supply = <&vcc_sd>; |
| 241 |
|
| 242 |
bus-width = <4>; |
| 243 |
cap-mmc-highspeed; |
| 244 |
cap-sd-highspeed; |
| 245 |
disable-wp; |
| 246 |
}; |
| 247 |
|
| 248 |
&pinctrl { |
| 249 |
pcfg_output_low: pcfg-output-low { |
| 250 |
output-low; |
| 251 |
}; |
| 252 |
|
| 253 |
usb { |
| 254 |
host_vbus_drv: host-vbus-drv { |
| 255 |
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 256 |
}; |
| 257 |
otg_vbus_drv: otg-vbus-drv { |
| 258 |
rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 259 |
}; |
| 260 |
}; |
| 261 |
}; |
| 262 |
|
| 263 |
&pwm1 { |
| 264 |
status = "okay"; |
| 265 |
}; |
| 266 |
|
| 267 |
&pwm2 { |
| 268 |
status = "okay"; |
| 269 |
}; |
| 270 |
|
| 271 |
&pwm3 { |
| 272 |
status = "okay"; |
| 273 |
}; |
| 274 |
|
| 275 |
&uart0 { |
| 276 |
status = "okay"; |
| 277 |
}; |
| 278 |
|
| 279 |
&uart1 { |
| 280 |
status = "okay"; |
| 281 |
}; |
| 282 |
|
| 283 |
&uart2 { |
| 284 |
status = "okay"; |
| 285 |
}; |
| 286 |
|
| 287 |
&uart3 { |
| 288 |
status = "okay"; |
| 289 |
}; |
| 290 |
|
| 291 |
&usbphy { |
| 292 |
status = "okay"; |
| 293 |
}; |
| 294 |
|
| 295 |
&usb_host { |
| 296 |
status = "okay"; |
| 297 |
}; |
| 298 |
|
| 299 |
&usb_otg { |
| 300 |
status = "okay"; |
| 301 |
}; |
| 302 |
|
| 303 |
&wdt { |
| 304 |
status = "okay"; |
| 305 |
}; |