| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
#include <dt-bindings/input/input.h> |
| 4 |
#include <dt-bindings/pwm/pwm.h> |
| 5 |
#include "rk3288.dtsi" |
| 6 |
|
| 7 |
/ { |
| 8 |
memory@0 { |
| 9 |
device_type = "memory"; |
| 10 |
reg = <0x0 0x0 0x0 0x80000000>; |
| 11 |
}; |
| 12 |
|
| 13 |
adc-keys { |
| 14 |
compatible = "adc-keys"; |
| 15 |
io-channels = <&saradc 1>; |
| 16 |
io-channel-names = "buttons"; |
| 17 |
keyup-threshold-microvolt = <1800000>; |
| 18 |
|
| 19 |
button-up { |
| 20 |
label = "Volume Up"; |
| 21 |
linux,code = <KEY_VOLUMEUP>; |
| 22 |
press-threshold-microvolt = <100000>; |
| 23 |
}; |
| 24 |
|
| 25 |
button-down { |
| 26 |
label = "Volume Down"; |
| 27 |
linux,code = <KEY_VOLUMEDOWN>; |
| 28 |
press-threshold-microvolt = <300000>; |
| 29 |
}; |
| 30 |
|
| 31 |
button-menu { |
| 32 |
label = "Menu"; |
| 33 |
linux,code = <KEY_MENU>; |
| 34 |
press-threshold-microvolt = <640000>; |
| 35 |
}; |
| 36 |
|
| 37 |
button-esc { |
| 38 |
label = "Esc"; |
| 39 |
linux,code = <KEY_ESC>; |
| 40 |
press-threshold-microvolt = <1000000>; |
| 41 |
}; |
| 42 |
|
| 43 |
button-home { |
| 44 |
label = "Home"; |
| 45 |
linux,code = <KEY_HOME>; |
| 46 |
press-threshold-microvolt = <1300000>; |
| 47 |
}; |
| 48 |
}; |
| 49 |
|
| 50 |
backlight: backlight { |
| 51 |
compatible = "pwm-backlight"; |
| 52 |
brightness-levels = < |
| 53 |
0 1 2 3 4 5 6 7 |
| 54 |
8 9 10 11 12 13 14 15 |
| 55 |
16 17 18 19 20 21 22 23 |
| 56 |
24 25 26 27 28 29 30 31 |
| 57 |
32 33 34 35 36 37 38 39 |
| 58 |
40 41 42 43 44 45 46 47 |
| 59 |
48 49 50 51 52 53 54 55 |
| 60 |
56 57 58 59 60 61 62 63 |
| 61 |
64 65 66 67 68 69 70 71 |
| 62 |
72 73 74 75 76 77 78 79 |
| 63 |
80 81 82 83 84 85 86 87 |
| 64 |
88 89 90 91 92 93 94 95 |
| 65 |
96 97 98 99 100 101 102 103 |
| 66 |
104 105 106 107 108 109 110 111 |
| 67 |
112 113 114 115 116 117 118 119 |
| 68 |
120 121 122 123 124 125 126 127 |
| 69 |
128 129 130 131 132 133 134 135 |
| 70 |
136 137 138 139 140 141 142 143 |
| 71 |
144 145 146 147 148 149 150 151 |
| 72 |
152 153 154 155 156 157 158 159 |
| 73 |
160 161 162 163 164 165 166 167 |
| 74 |
168 169 170 171 172 173 174 175 |
| 75 |
176 177 178 179 180 181 182 183 |
| 76 |
184 185 186 187 188 189 190 191 |
| 77 |
192 193 194 195 196 197 198 199 |
| 78 |
200 201 202 203 204 205 206 207 |
| 79 |
208 209 210 211 212 213 214 215 |
| 80 |
216 217 218 219 220 221 222 223 |
| 81 |
224 225 226 227 228 229 230 231 |
| 82 |
232 233 234 235 236 237 238 239 |
| 83 |
240 241 242 243 244 245 246 247 |
| 84 |
248 249 250 251 252 253 254 255>; |
| 85 |
default-brightness-level = <128>; |
| 86 |
enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; |
| 87 |
pinctrl-names = "default"; |
| 88 |
pinctrl-0 = <&bl_en>; |
| 89 |
pwms = <&pwm0 0 1000000 PWM_POLARITY_INVERTED>; |
| 90 |
}; |
| 91 |
|
| 92 |
ext_gmac: external-gmac-clock { |
| 93 |
compatible = "fixed-clock"; |
| 94 |
clock-frequency = <125000000>; |
| 95 |
clock-output-names = "ext_gmac"; |
| 96 |
#clock-cells = <0>; |
| 97 |
}; |
| 98 |
|
| 99 |
panel: panel { |
| 100 |
compatible = "lg,lp079qx1-sp0v"; |
| 101 |
backlight = <&backlight>; |
| 102 |
enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>; |
| 103 |
pinctrl-0 = <&lcd_cs>; |
| 104 |
|
| 105 |
ports { |
| 106 |
panel_in: port { |
| 107 |
panel_in_edp: endpoint { |
| 108 |
remote-endpoint = <&edp_out_panel>; |
| 109 |
}; |
| 110 |
}; |
| 111 |
}; |
| 112 |
}; |
| 113 |
|
| 114 |
gpio-keys { |
| 115 |
compatible = "gpio-keys"; |
| 116 |
autorepeat; |
| 117 |
|
| 118 |
pinctrl-names = "default"; |
| 119 |
pinctrl-0 = <&pwrbtn>; |
| 120 |
|
| 121 |
key-power { |
| 122 |
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; |
| 123 |
linux,code = <KEY_POWER>; |
| 124 |
label = "GPIO Key Power"; |
| 125 |
linux,input-type = <1>; |
| 126 |
wakeup-source; |
| 127 |
debounce-interval = <100>; |
| 128 |
}; |
| 129 |
}; |
| 130 |
|
| 131 |
/* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */ |
| 132 |
vcc_host: regulator-vcc-host { |
| 133 |
compatible = "regulator-fixed"; |
| 134 |
enable-active-high; |
| 135 |
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; |
| 136 |
pinctrl-names = "default"; |
| 137 |
pinctrl-0 = <&host_vbus_drv>; |
| 138 |
regulator-name = "vcc_host"; |
| 139 |
regulator-always-on; |
| 140 |
regulator-boot-on; |
| 141 |
}; |
| 142 |
|
| 143 |
vcc_phy: regulator-vcc-phy { |
| 144 |
compatible = "regulator-fixed"; |
| 145 |
enable-active-high; |
| 146 |
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; |
| 147 |
pinctrl-names = "default"; |
| 148 |
pinctrl-0 = <ð_phy_pwr>; |
| 149 |
regulator-name = "vcc_phy"; |
| 150 |
regulator-min-microvolt = <3300000>; |
| 151 |
regulator-max-microvolt = <3300000>; |
| 152 |
regulator-always-on; |
| 153 |
regulator-boot-on; |
| 154 |
}; |
| 155 |
|
| 156 |
vcc_sys: regulator-vsys { |
| 157 |
compatible = "regulator-fixed"; |
| 158 |
regulator-name = "vcc_sys"; |
| 159 |
regulator-min-microvolt = <5000000>; |
| 160 |
regulator-max-microvolt = <5000000>; |
| 161 |
regulator-always-on; |
| 162 |
regulator-boot-on; |
| 163 |
}; |
| 164 |
|
| 165 |
/* |
| 166 |
* NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from |
| 167 |
* vcc_io directly. Those boards won't be able to power cycle SD cards |
| 168 |
* but it shouldn't hurt to toggle this pin there anyway. |
| 169 |
*/ |
| 170 |
vcc_sd: regulator-sdmmc { |
| 171 |
compatible = "regulator-fixed"; |
| 172 |
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; |
| 173 |
pinctrl-names = "default"; |
| 174 |
pinctrl-0 = <&sdmmc_pwr>; |
| 175 |
regulator-name = "vcc_sd"; |
| 176 |
regulator-min-microvolt = <3300000>; |
| 177 |
regulator-max-microvolt = <3300000>; |
| 178 |
startup-delay-us = <100000>; |
| 179 |
vin-supply = <&vcc_io>; |
| 180 |
}; |
| 181 |
}; |
| 182 |
|
| 183 |
&cpu0 { |
| 184 |
cpu0-supply = <&vdd_cpu>; |
| 185 |
}; |
| 186 |
|
| 187 |
&edp { |
| 188 |
force-hpd; |
| 189 |
status = "okay"; |
| 190 |
|
| 191 |
ports { |
| 192 |
edp_out: port@1 { |
| 193 |
reg = <1>; |
| 194 |
#address-cells = <1>; |
| 195 |
#size-cells = <0>; |
| 196 |
|
| 197 |
edp_out_panel: endpoint@0 { |
| 198 |
reg = <0>; |
| 199 |
remote-endpoint = <&panel_in_edp>; |
| 200 |
}; |
| 201 |
}; |
| 202 |
}; |
| 203 |
}; |
| 204 |
|
| 205 |
&edp_phy { |
| 206 |
status = "okay"; |
| 207 |
}; |
| 208 |
|
| 209 |
&emmc { |
| 210 |
bus-width = <8>; |
| 211 |
cap-mmc-highspeed; |
| 212 |
disable-wp; |
| 213 |
non-removable; |
| 214 |
pinctrl-names = "default"; |
| 215 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; |
| 216 |
status = "okay"; |
| 217 |
}; |
| 218 |
|
| 219 |
&saradc { |
| 220 |
vref-supply = <&vcc_18>; |
| 221 |
status = "okay"; |
| 222 |
}; |
| 223 |
|
| 224 |
&sdmmc { |
| 225 |
bus-width = <4>; |
| 226 |
cap-mmc-highspeed; |
| 227 |
cap-sd-highspeed; |
| 228 |
card-detect-delay = <200>; |
| 229 |
disable-wp; /* wp not hooked up */ |
| 230 |
pinctrl-names = "default"; |
| 231 |
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; |
| 232 |
status = "okay"; |
| 233 |
vmmc-supply = <&vcc_sd>; |
| 234 |
vqmmc-supply = <&vccio_sd>; |
| 235 |
}; |
| 236 |
|
| 237 |
&gmac { |
| 238 |
phy-supply = <&vcc_phy>; |
| 239 |
phy-mode = "rgmii"; |
| 240 |
clock_in_out = "input"; |
| 241 |
snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; |
| 242 |
snps,reset-active-low; |
| 243 |
snps,reset-delays-us = <0 10000 1000000>; |
| 244 |
assigned-clocks = <&cru SCLK_MAC>; |
| 245 |
assigned-clock-parents = <&ext_gmac>; |
| 246 |
pinctrl-names = "default"; |
| 247 |
pinctrl-0 = <&rgmii_pins>; |
| 248 |
tx_delay = <0x30>; |
| 249 |
rx_delay = <0x10>; |
| 250 |
status = "okay"; |
| 251 |
}; |
| 252 |
|
| 253 |
&gpu { |
| 254 |
mali-supply = <&vdd_gpu>; |
| 255 |
status = "okay"; |
| 256 |
}; |
| 257 |
|
| 258 |
&hdmi { |
| 259 |
ddc-i2c-bus = <&i2c5>; |
| 260 |
status = "okay"; |
| 261 |
}; |
| 262 |
|
| 263 |
&i2c0 { |
| 264 |
status = "okay"; |
| 265 |
}; |
| 266 |
|
| 267 |
&i2c5 { |
| 268 |
status = "okay"; |
| 269 |
}; |
| 270 |
|
| 271 |
&wdt { |
| 272 |
status = "okay"; |
| 273 |
}; |
| 274 |
|
| 275 |
&pwm0 { |
| 276 |
status = "okay"; |
| 277 |
}; |
| 278 |
|
| 279 |
&uart0 { |
| 280 |
status = "okay"; |
| 281 |
}; |
| 282 |
|
| 283 |
&uart1 { |
| 284 |
status = "okay"; |
| 285 |
}; |
| 286 |
|
| 287 |
&uart2 { |
| 288 |
status = "okay"; |
| 289 |
}; |
| 290 |
|
| 291 |
&uart3 { |
| 292 |
status = "okay"; |
| 293 |
}; |
| 294 |
|
| 295 |
&uart4 { |
| 296 |
status = "okay"; |
| 297 |
}; |
| 298 |
|
| 299 |
&tsadc { |
| 300 |
rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ |
| 301 |
rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ |
| 302 |
status = "okay"; |
| 303 |
}; |
| 304 |
|
| 305 |
&pinctrl { |
| 306 |
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { |
| 307 |
drive-strength = <8>; |
| 308 |
}; |
| 309 |
|
| 310 |
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { |
| 311 |
bias-pull-up; |
| 312 |
drive-strength = <8>; |
| 313 |
}; |
| 314 |
|
| 315 |
backlight { |
| 316 |
bl_en: bl-en { |
| 317 |
rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 318 |
}; |
| 319 |
}; |
| 320 |
|
| 321 |
buttons { |
| 322 |
pwrbtn: pwrbtn { |
| 323 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 324 |
}; |
| 325 |
}; |
| 326 |
|
| 327 |
lcd { |
| 328 |
lcd_cs: lcd-cs { |
| 329 |
rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 330 |
}; |
| 331 |
}; |
| 332 |
|
| 333 |
pmic { |
| 334 |
pmic_int: pmic-int { |
| 335 |
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; |
| 336 |
}; |
| 337 |
}; |
| 338 |
|
| 339 |
sdmmc { |
| 340 |
/* |
| 341 |
* Default drive strength isn't enough to achieve even |
| 342 |
* high-speed mode on EVB board so bump up to 8ma. |
| 343 |
*/ |
| 344 |
sdmmc_bus4: sdmmc-bus4 { |
| 345 |
rockchip,pins = <6 RK_PC0 1 &pcfg_pull_up_drv_8ma>, |
| 346 |
<6 RK_PC1 1 &pcfg_pull_up_drv_8ma>, |
| 347 |
<6 RK_PC2 1 &pcfg_pull_up_drv_8ma>, |
| 348 |
<6 RK_PC3 1 &pcfg_pull_up_drv_8ma>; |
| 349 |
}; |
| 350 |
|
| 351 |
sdmmc_clk: sdmmc-clk { |
| 352 |
rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; |
| 353 |
}; |
| 354 |
|
| 355 |
sdmmc_cmd: sdmmc-cmd { |
| 356 |
rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>; |
| 357 |
}; |
| 358 |
|
| 359 |
sdmmc_pwr: sdmmc-pwr { |
| 360 |
rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 361 |
}; |
| 362 |
}; |
| 363 |
|
| 364 |
usb { |
| 365 |
host_vbus_drv: host-vbus-drv { |
| 366 |
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 367 |
}; |
| 368 |
}; |
| 369 |
|
| 370 |
eth_phy { |
| 371 |
eth_phy_pwr: eth-phy-pwr { |
| 372 |
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 373 |
}; |
| 374 |
}; |
| 375 |
}; |
| 376 |
|
| 377 |
&usbphy { |
| 378 |
status = "okay"; |
| 379 |
}; |
| 380 |
|
| 381 |
&usb_host0_ehci { |
| 382 |
status = "okay"; |
| 383 |
}; |
| 384 |
|
| 385 |
&usb_host1 { |
| 386 |
status = "okay"; |
| 387 |
}; |
| 388 |
|
| 389 |
&vopb { |
| 390 |
status = "okay"; |
| 391 |
}; |
| 392 |
|
| 393 |
&vopb_mmu { |
| 394 |
status = "okay"; |
| 395 |
}; |
| 396 |
|
| 397 |
&vopl { |
| 398 |
status = "okay"; |
| 399 |
}; |
| 400 |
|
| 401 |
&vopl_mmu { |
| 402 |
status = "okay"; |
| 403 |
}; |