| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/input/input.h> |
| 6 |
#include "rk3229.dtsi" |
| 7 |
|
| 8 |
/ { |
| 9 |
model = "Rockchip RK3229 Evaluation board"; |
| 10 |
compatible = "rockchip,rk3229-evb", "rockchip,rk3229"; |
| 11 |
|
| 12 |
aliases { |
| 13 |
mmc0 = &emmc; |
| 14 |
}; |
| 15 |
|
| 16 |
memory@60000000 { |
| 17 |
device_type = "memory"; |
| 18 |
reg = <0x60000000 0x40000000>; |
| 19 |
}; |
| 20 |
|
| 21 |
dc_12v: regulator-dc-12v { |
| 22 |
compatible = "regulator-fixed"; |
| 23 |
regulator-name = "dc_12v"; |
| 24 |
regulator-always-on; |
| 25 |
regulator-boot-on; |
| 26 |
regulator-min-microvolt = <12000000>; |
| 27 |
regulator-max-microvolt = <12000000>; |
| 28 |
}; |
| 29 |
|
| 30 |
ext_gmac: ext_gmac { |
| 31 |
compatible = "fixed-clock"; |
| 32 |
clock-frequency = <125000000>; |
| 33 |
clock-output-names = "ext_gmac"; |
| 34 |
#clock-cells = <0>; |
| 35 |
}; |
| 36 |
|
| 37 |
vcc_host: regulator-vcc-host { |
| 38 |
compatible = "regulator-fixed"; |
| 39 |
enable-active-high; |
| 40 |
gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; |
| 41 |
pinctrl-names = "default"; |
| 42 |
pinctrl-0 = <&host_vbus_drv>; |
| 43 |
regulator-name = "vcc_host"; |
| 44 |
regulator-always-on; |
| 45 |
regulator-boot-on; |
| 46 |
vin-supply = <&vcc_sys>; |
| 47 |
}; |
| 48 |
|
| 49 |
vcc_phy: regulator-vcc-phy { |
| 50 |
compatible = "regulator-fixed"; |
| 51 |
enable-active-high; |
| 52 |
regulator-name = "vcc_phy"; |
| 53 |
regulator-min-microvolt = <1800000>; |
| 54 |
regulator-max-microvolt = <1800000>; |
| 55 |
regulator-always-on; |
| 56 |
regulator-boot-on; |
| 57 |
vin-supply = <&vccio_1v8>; |
| 58 |
}; |
| 59 |
|
| 60 |
vcc_sys: regulator-vcc-sys { |
| 61 |
compatible = "regulator-fixed"; |
| 62 |
regulator-name = "vcc_sys"; |
| 63 |
regulator-always-on; |
| 64 |
regulator-boot-on; |
| 65 |
regulator-min-microvolt = <5000000>; |
| 66 |
regulator-max-microvolt = <5000000>; |
| 67 |
vin-supply = <&dc_12v>; |
| 68 |
}; |
| 69 |
|
| 70 |
vccio_1v8: regulator-vccio-1v8 { |
| 71 |
compatible = "regulator-fixed"; |
| 72 |
regulator-name = "vccio_1v8"; |
| 73 |
regulator-min-microvolt = <1800000>; |
| 74 |
regulator-max-microvolt = <1800000>; |
| 75 |
regulator-always-on; |
| 76 |
vin-supply = <&vcc_sys>; |
| 77 |
}; |
| 78 |
|
| 79 |
vccio_3v3: regulator-vccio-3v3 { |
| 80 |
compatible = "regulator-fixed"; |
| 81 |
regulator-name = "vccio_3v3"; |
| 82 |
regulator-min-microvolt = <3300000>; |
| 83 |
regulator-max-microvolt = <3300000>; |
| 84 |
regulator-always-on; |
| 85 |
vin-supply = <&vcc_sys>; |
| 86 |
}; |
| 87 |
|
| 88 |
vdd_arm: regulator-vdd-arm { |
| 89 |
compatible = "pwm-regulator"; |
| 90 |
pwms = <&pwm1 0 25000 1>; |
| 91 |
pwm-supply = <&vcc_sys>; |
| 92 |
regulator-name = "vdd_arm"; |
| 93 |
regulator-min-microvolt = <950000>; |
| 94 |
regulator-max-microvolt = <1400000>; |
| 95 |
regulator-always-on; |
| 96 |
regulator-boot-on; |
| 97 |
}; |
| 98 |
|
| 99 |
vdd_log: regulator-vdd-log { |
| 100 |
compatible = "pwm-regulator"; |
| 101 |
pwms = <&pwm2 0 25000 1>; |
| 102 |
pwm-supply = <&vcc_sys>; |
| 103 |
regulator-name = "vdd_log"; |
| 104 |
regulator-min-microvolt = <1000000>; |
| 105 |
regulator-max-microvolt = <1300000>; |
| 106 |
regulator-always-on; |
| 107 |
regulator-boot-on; |
| 108 |
}; |
| 109 |
|
| 110 |
gpio-keys { |
| 111 |
compatible = "gpio-keys"; |
| 112 |
autorepeat; |
| 113 |
pinctrl-names = "default"; |
| 114 |
pinctrl-0 = <&pwr_key>; |
| 115 |
|
| 116 |
power_key: power-key { |
| 117 |
label = "GPIO Key Power"; |
| 118 |
gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; |
| 119 |
linux,code = <KEY_POWER>; |
| 120 |
debounce-interval = <100>; |
| 121 |
wakeup-source; |
| 122 |
}; |
| 123 |
}; |
| 124 |
}; |
| 125 |
|
| 126 |
&cpu0 { |
| 127 |
cpu-supply = <&vdd_arm>; |
| 128 |
}; |
| 129 |
|
| 130 |
&cpu1 { |
| 131 |
cpu-supply = <&vdd_arm>; |
| 132 |
}; |
| 133 |
|
| 134 |
&cpu2 { |
| 135 |
cpu-supply = <&vdd_arm>; |
| 136 |
}; |
| 137 |
|
| 138 |
&cpu3 { |
| 139 |
cpu-supply = <&vdd_arm>; |
| 140 |
}; |
| 141 |
|
| 142 |
&emmc { |
| 143 |
cap-mmc-highspeed; |
| 144 |
non-removable; |
| 145 |
status = "okay"; |
| 146 |
}; |
| 147 |
|
| 148 |
&gmac { |
| 149 |
assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>; |
| 150 |
assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>; |
| 151 |
clock_in_out = "input"; |
| 152 |
phy-supply = <&vcc_phy>; |
| 153 |
phy-mode = "rgmii"; |
| 154 |
pinctrl-names = "default"; |
| 155 |
pinctrl-0 = <&rgmii_pins>; |
| 156 |
snps,reset-gpio = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>; |
| 157 |
snps,reset-active-low; |
| 158 |
snps,reset-delays-us = <0 10000 1000000>; |
| 159 |
tx_delay = <0x30>; |
| 160 |
rx_delay = <0x10>; |
| 161 |
status = "okay"; |
| 162 |
}; |
| 163 |
|
| 164 |
&io_domains { |
| 165 |
status = "okay"; |
| 166 |
|
| 167 |
vccio1-supply = <&vccio_3v3>; |
| 168 |
vccio2-supply = <&vccio_1v8>; |
| 169 |
vccio4-supply = <&vccio_3v3>; |
| 170 |
}; |
| 171 |
|
| 172 |
&pinctrl { |
| 173 |
keys { |
| 174 |
pwr_key: pwr-key { |
| 175 |
rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>; |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
usb { |
| 180 |
host_vbus_drv: host-vbus-drv { |
| 181 |
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 182 |
}; |
| 183 |
}; |
| 184 |
}; |
| 185 |
|
| 186 |
&pwm1 { |
| 187 |
status = "okay"; |
| 188 |
}; |
| 189 |
|
| 190 |
&pwm2 { |
| 191 |
status = "okay"; |
| 192 |
}; |
| 193 |
|
| 194 |
&tsadc { |
| 195 |
rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ |
| 196 |
status = "okay"; |
| 197 |
}; |
| 198 |
|
| 199 |
&uart2 { |
| 200 |
status = "okay"; |
| 201 |
}; |
| 202 |
|
| 203 |
&u2phy0 { |
| 204 |
status = "okay"; |
| 205 |
|
| 206 |
u2phy0_otg: otg-port { |
| 207 |
status = "okay"; |
| 208 |
}; |
| 209 |
|
| 210 |
u2phy0_host: host-port { |
| 211 |
phy-supply = <&vcc_host>; |
| 212 |
status = "okay"; |
| 213 |
}; |
| 214 |
}; |
| 215 |
|
| 216 |
&u2phy1 { |
| 217 |
status = "okay"; |
| 218 |
|
| 219 |
u2phy1_otg: otg-port { |
| 220 |
phy-supply = <&vcc_host>; |
| 221 |
status = "okay"; |
| 222 |
}; |
| 223 |
|
| 224 |
u2phy1_host: host-port { |
| 225 |
phy-supply = <&vcc_host>; |
| 226 |
status = "okay"; |
| 227 |
}; |
| 228 |
}; |
| 229 |
|
| 230 |
&usb_host0_ehci { |
| 231 |
status = "okay"; |
| 232 |
}; |
| 233 |
|
| 234 |
&usb_host0_ohci { |
| 235 |
status = "okay"; |
| 236 |
}; |
| 237 |
|
| 238 |
&usb_host1_ehci { |
| 239 |
status = "okay"; |
| 240 |
}; |
| 241 |
|
| 242 |
&usb_host1_ohci { |
| 243 |
status = "okay"; |
| 244 |
}; |
| 245 |
|
| 246 |
&usb_host2_ehci { |
| 247 |
status = "okay"; |
| 248 |
}; |
| 249 |
|
| 250 |
&usb_host2_ohci { |
| 251 |
status = "okay"; |
| 252 |
}; |
| 253 |
|
| 254 |
&usb_otg { |
| 255 |
status = "okay"; |
| 256 |
}; |