| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2024 Relfor Labs Pvt. Ltd. |
| 4 |
*/ |
| 5 |
|
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
#include "rv1109.dtsi" |
| 9 |
#include <dt-bindings/leds/common.h> |
| 10 |
#include <dt-bindings/input/input.h> |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "Rockchip RV1109 Relfor Saib Board"; |
| 14 |
compatible = "relfor,saib", "rockchip,rv1109"; |
| 15 |
|
| 16 |
gpio-keys { |
| 17 |
compatible = "gpio-keys"; |
| 18 |
|
| 19 |
button { |
| 20 |
gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>; |
| 21 |
linux,code = <KEY_DATA>; |
| 22 |
label = "GPIO User Switch"; |
| 23 |
linux,input-type = <1>; |
| 24 |
}; |
| 25 |
}; |
| 26 |
|
| 27 |
ir_receiver: ir-receiver { |
| 28 |
compatible = "gpio-ir-receiver"; |
| 29 |
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; |
| 30 |
pinctrl-names = "default"; |
| 31 |
pinctrl-0 = <&ir_rx>; |
| 32 |
}; |
| 33 |
|
| 34 |
ir_transmitter: ir-transmitter { |
| 35 |
compatible = "pwm-ir-tx"; |
| 36 |
pwms = <&pwm11 0 10000000 1>; |
| 37 |
}; |
| 38 |
|
| 39 |
led-controller { |
| 40 |
compatible = "pwm-leds-multicolor"; |
| 41 |
|
| 42 |
multi-led { |
| 43 |
color = <LED_COLOR_ID_RGB>; |
| 44 |
function = LED_FUNCTION_INDICATOR; |
| 45 |
max-brightness = <65535>; |
| 46 |
|
| 47 |
led-0 { |
| 48 |
active-low; |
| 49 |
color = <LED_COLOR_ID_BLUE>; |
| 50 |
pwms = <&pwm9 0 50000 0>; |
| 51 |
}; |
| 52 |
|
| 53 |
led-1 { |
| 54 |
active-low; |
| 55 |
color = <LED_COLOR_ID_GREEN>; |
| 56 |
pwms = <&pwm6 0 50000 0>; |
| 57 |
}; |
| 58 |
|
| 59 |
led-2 { |
| 60 |
active-low; |
| 61 |
color = <LED_COLOR_ID_RED>; |
| 62 |
pwms = <&pwm10 0 50000 0>; |
| 63 |
}; |
| 64 |
}; |
| 65 |
}; |
| 66 |
|
| 67 |
pwm-leds { |
| 68 |
compatible = "pwm-leds"; |
| 69 |
|
| 70 |
led-0 { |
| 71 |
pwms = <&pwm2 0 50000 0>; |
| 72 |
max-brightness = <255>; |
| 73 |
linux,default-trigger = "none"; |
| 74 |
}; |
| 75 |
|
| 76 |
led-1 { |
| 77 |
pwms = <&pwm8 0 50000 0>; |
| 78 |
max-brightness = <0>; |
| 79 |
linux,default-trigger = "none"; |
| 80 |
}; |
| 81 |
|
| 82 |
led-2 { |
| 83 |
pwms = <&pwm5 0 50000 0>; |
| 84 |
max-brightness = <255>; |
| 85 |
linux,default-trigger = "none"; |
| 86 |
}; |
| 87 |
}; |
| 88 |
|
| 89 |
sdio_pwrseq: pwrseq-sdio { |
| 90 |
compatible = "mmc-pwrseq-simple"; |
| 91 |
clocks = <&rtc0>; |
| 92 |
clock-names = "ext_clock"; |
| 93 |
pinctrl-names = "default"; |
| 94 |
pinctrl-0 = <&wifi_enable_h>; |
| 95 |
reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>; |
| 96 |
}; |
| 97 |
|
| 98 |
vcc_0v8: regulator-vcc-0v8 { |
| 99 |
compatible = "regulator-fixed"; |
| 100 |
regulator-name = "vcc_0v8"; |
| 101 |
regulator-min-microvolt = <800000>; |
| 102 |
regulator-max-microvolt = <800000>; |
| 103 |
regulator-always-on; |
| 104 |
regulator-boot-on; |
| 105 |
startup-delay-us = <150>; |
| 106 |
vin-supply = <&vcc5v0_sys>; |
| 107 |
}; |
| 108 |
|
| 109 |
vcc_1v2_ddr: regulator-vcc-1v2-ddr { |
| 110 |
compatible = "regulator-fixed"; |
| 111 |
regulator-name = "vcc_1v2_ddr"; |
| 112 |
regulator-min-microvolt = <1200000>; |
| 113 |
regulator-max-microvolt = <1200000>; |
| 114 |
regulator-always-on; |
| 115 |
regulator-boot-on; |
| 116 |
startup-delay-us = <75000>; |
| 117 |
vin-supply = <&vcc5v0_sys>; |
| 118 |
}; |
| 119 |
|
| 120 |
vcc_1v8: regulator-vcc-1v8 { |
| 121 |
compatible = "regulator-fixed"; |
| 122 |
regulator-name = "vcc_1v8"; |
| 123 |
regulator-min-microvolt = <1800000>; |
| 124 |
regulator-max-microvolt = <1800000>; |
| 125 |
regulator-always-on; |
| 126 |
regulator-boot-on; |
| 127 |
startup-delay-us = <51000>; |
| 128 |
vin-supply = <&vcc5v0_sys>; |
| 129 |
}; |
| 130 |
|
| 131 |
vcc1v8_ir: regulator-vcc1v8-ir { |
| 132 |
compatible = "regulator-fixed"; |
| 133 |
regulator-name = "vcc1v8_ir"; |
| 134 |
regulator-min-microvolt = <1800000>; |
| 135 |
regulator-max-microvolt = <1800000>; |
| 136 |
regulator-always-on; |
| 137 |
regulator-boot-on; |
| 138 |
vin-supply = <&vcc5v0_sys>; |
| 139 |
}; |
| 140 |
|
| 141 |
vcc_2v5_ddr: regulator-vcc-2v5-ddr { |
| 142 |
compatible = "regulator-fixed"; |
| 143 |
regulator-name = "vcc_2v5_ddr"; |
| 144 |
regulator-min-microvolt = <2500000>; |
| 145 |
regulator-max-microvolt = <2500000>; |
| 146 |
regulator-always-on; |
| 147 |
regulator-boot-on; |
| 148 |
vin-supply = <&vcc3v3_sys>; |
| 149 |
}; |
| 150 |
|
| 151 |
vcc3v3_sys: regulator-vcc3v3-sys { |
| 152 |
compatible = "regulator-fixed"; |
| 153 |
regulator-name = "vcc3v3_sys"; |
| 154 |
regulator-min-microvolt = <3300000>; |
| 155 |
regulator-max-microvolt = <3300000>; |
| 156 |
regulator-always-on; |
| 157 |
regulator-boot-on; |
| 158 |
startup-delay-us = <75000>; |
| 159 |
vin-supply = <&vcc5v0_sys>; |
| 160 |
}; |
| 161 |
|
| 162 |
vcc5v0_sys: regulator-vcc5v0-sys { |
| 163 |
compatible = "regulator-fixed"; |
| 164 |
regulator-name = "vcc5v0_sys"; |
| 165 |
regulator-min-microvolt = <5000000>; |
| 166 |
regulator-max-microvolt = <5000000>; |
| 167 |
regulator-always-on; |
| 168 |
regulator-boot-on; |
| 169 |
}; |
| 170 |
|
| 171 |
vdd_arm: regulator-vdd-arm { |
| 172 |
compatible = "pwm-regulator"; |
| 173 |
pwms = <&pwm0 0 5000 1>; |
| 174 |
regulator-name = "vdd_arm"; |
| 175 |
regulator-min-microvolt = <720000>; |
| 176 |
regulator-max-microvolt = <1000000>; |
| 177 |
regulator-settling-time-up-us = <18000>; |
| 178 |
regulator-always-on; |
| 179 |
regulator-boot-on; |
| 180 |
pwm-supply = <&vcc3v3_sys>; |
| 181 |
vin-supply = <&vcc5v0_sys>; |
| 182 |
}; |
| 183 |
|
| 184 |
vdd_npu_vepu: regulator-vdd-npu-vepu { |
| 185 |
compatible = "pwm-regulator"; |
| 186 |
pwms = <&pwm1 0 5000 1>; |
| 187 |
regulator-name = "vdd_npu_vepu"; |
| 188 |
regulator-min-microvolt = <650000>; |
| 189 |
regulator-max-microvolt = <950000>; |
| 190 |
regulator-settling-time-up-us = <18000>; |
| 191 |
regulator-always-on; |
| 192 |
regulator-boot-on; |
| 193 |
pwm-supply = <&vcc3v3_sys>; |
| 194 |
vin-supply = <&vcc5v0_sys>; |
| 195 |
}; |
| 196 |
|
| 197 |
thermal_sensor1: thermal-sensor1 { |
| 198 |
compatible = "generic-adc-thermal"; |
| 199 |
#thermal-sensor-cells = <0>; |
| 200 |
io-channels = <&saradc 1>; |
| 201 |
io-channel-names = "sensor-channel"; |
| 202 |
temperature-lookup-table = <(-40000) 826 |
| 203 |
85000 609>; |
| 204 |
}; |
| 205 |
|
| 206 |
thermal_sensor2: thermal-sensor2 { |
| 207 |
compatible = "generic-adc-thermal"; |
| 208 |
#thermal-sensor-cells = <0>; |
| 209 |
io-channels = <&saradc 2>; |
| 210 |
io-channel-names = "sensor-channel"; |
| 211 |
temperature-lookup-table = <(-40000) 826 |
| 212 |
85000 609>; |
| 213 |
}; |
| 214 |
}; |
| 215 |
|
| 216 |
&cpu0 { |
| 217 |
cpu-supply = <&vdd_arm>; |
| 218 |
}; |
| 219 |
|
| 220 |
&cpu1 { |
| 221 |
cpu-supply = <&vdd_arm>; |
| 222 |
}; |
| 223 |
|
| 224 |
&emmc { |
| 225 |
bus-width = <8>; |
| 226 |
non-removable; |
| 227 |
pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk>; |
| 228 |
pinctrl-names = "default"; |
| 229 |
rockchip,default-sample-phase = <90>; |
| 230 |
vmmc-supply = <&vcc3v3_sys>; |
| 231 |
status = "okay"; |
| 232 |
}; |
| 233 |
|
| 234 |
&i2c3 { |
| 235 |
pinctrl-0 = <&i2c3m2_xfer>; |
| 236 |
pinctrl-names = "default"; |
| 237 |
status = "okay"; |
| 238 |
|
| 239 |
rtc0: rtc@52 { |
| 240 |
compatible = "microcrystal,rv3028"; |
| 241 |
reg = <0x52>; |
| 242 |
#clock-cells = <0>; |
| 243 |
interrupt-parent = <&gpio2>; |
| 244 |
interrupts = <0 IRQ_TYPE_LEVEL_LOW>; |
| 245 |
pinctrl-0 = <&rtc_int>; |
| 246 |
pinctrl-names = "default"; |
| 247 |
}; |
| 248 |
}; |
| 249 |
|
| 250 |
&i2s0 { |
| 251 |
/delete-property/ pinctrl-0; |
| 252 |
rockchip,trcm-sync-rx-only; |
| 253 |
pinctrl-0 = <&i2s0m0_sclk_rx>, |
| 254 |
<&i2s0m0_lrck_rx>, |
| 255 |
<&i2s0m0_sdi0>; |
| 256 |
pinctrl-names = "default"; |
| 257 |
status = "okay"; |
| 258 |
}; |
| 259 |
|
| 260 |
&pinctrl { |
| 261 |
bluetooth-pins { |
| 262 |
bt_reset: bt-reset { |
| 263 |
rockchip,pins = |
| 264 |
<1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 265 |
}; |
| 266 |
bt_wake_dev: bt-wake-dev { |
| 267 |
rockchip,pins = |
| 268 |
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 269 |
}; |
| 270 |
bt_wake_host: bt-wake-host { |
| 271 |
rockchip,pins = |
| 272 |
<1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; |
| 273 |
}; |
| 274 |
}; |
| 275 |
|
| 276 |
buttons { |
| 277 |
switch: switch { |
| 278 |
rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; |
| 279 |
}; |
| 280 |
}; |
| 281 |
|
| 282 |
ir { |
| 283 |
ir_rx: ir-rx { |
| 284 |
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 285 |
}; |
| 286 |
}; |
| 287 |
|
| 288 |
pwm { |
| 289 |
pwm0m0_pins_pull_up: pwm0m0-pins-pull-up { |
| 290 |
rockchip,pins = |
| 291 |
/* pwm0_pin_m0 */ |
| 292 |
<0 RK_PB6 3 &pcfg_pull_up>; |
| 293 |
}; |
| 294 |
pwm1m0_pins_pull_up: pwm1m0-pins-pull-up { |
| 295 |
rockchip,pins = |
| 296 |
/* pwm1_pin_m0 */ |
| 297 |
<0 RK_PB7 3 &pcfg_pull_up>; |
| 298 |
}; |
| 299 |
}; |
| 300 |
|
| 301 |
rtc { |
| 302 |
rtc_int: rtc-int { |
| 303 |
rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 304 |
}; |
| 305 |
}; |
| 306 |
|
| 307 |
sdio-pwrseq { |
| 308 |
wifi_enable_h: wifi-enable-h { |
| 309 |
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 310 |
}; |
| 311 |
}; |
| 312 |
}; |
| 313 |
|
| 314 |
&pmu_io_domains { |
| 315 |
pmuio0-supply = <&vcc3v3_sys>; |
| 316 |
pmuio1-supply = <&vcc3v3_sys>; |
| 317 |
vccio4-supply = <&vcc3v3_sys>; |
| 318 |
vccio5-supply = <&vcc3v3_sys>; |
| 319 |
vccio6-supply = <&vcc3v3_sys>; |
| 320 |
vccio7-supply = <&vcc3v3_sys>; |
| 321 |
status = "okay"; |
| 322 |
}; |
| 323 |
|
| 324 |
&pwm0 { |
| 325 |
/delete-property/ pinctrl-0; |
| 326 |
pinctrl-0 = <&pwm0m0_pins_pull_up>; |
| 327 |
pinctrl-names = "default"; |
| 328 |
status = "okay"; |
| 329 |
}; |
| 330 |
|
| 331 |
&pwm1 { |
| 332 |
/delete-property/ pinctrl-0; |
| 333 |
pinctrl-0 = <&pwm1m0_pins_pull_up>; |
| 334 |
pinctrl-names = "default"; |
| 335 |
status = "okay"; |
| 336 |
}; |
| 337 |
|
| 338 |
&pwm2 { |
| 339 |
/delete-property/ pinctrl-0; |
| 340 |
pinctrl-0 = <&pwm2m1_pins>; |
| 341 |
pinctrl-names = "default"; |
| 342 |
status = "okay"; |
| 343 |
}; |
| 344 |
|
| 345 |
&pwm5 { |
| 346 |
pinctrl-0 = <&pwm5m0_pins>; |
| 347 |
pinctrl-names = "default"; |
| 348 |
status = "okay"; |
| 349 |
}; |
| 350 |
|
| 351 |
&pwm6 { |
| 352 |
pinctrl-0 = <&pwm6m0_pins>; |
| 353 |
pinctrl-names = "default"; |
| 354 |
status = "okay"; |
| 355 |
}; |
| 356 |
|
| 357 |
&pwm8 { |
| 358 |
pinctrl-0 = <&pwm8m1_pins>; |
| 359 |
pinctrl-names = "default"; |
| 360 |
status = "okay"; |
| 361 |
}; |
| 362 |
|
| 363 |
&pwm9 { |
| 364 |
pinctrl-0 = <&pwm9m1_pins>; |
| 365 |
pinctrl-names = "default"; |
| 366 |
status = "okay"; |
| 367 |
}; |
| 368 |
|
| 369 |
&pwm10 { |
| 370 |
pinctrl-0 = <&pwm10m1_pins>; |
| 371 |
pinctrl-names = "default"; |
| 372 |
status = "okay"; |
| 373 |
}; |
| 374 |
|
| 375 |
&pwm11 { |
| 376 |
/delete-property/ pinctrl-0; |
| 377 |
pinctrl-0 = <&pwm11m1_pins>; |
| 378 |
pinctrl-names = "default"; |
| 379 |
status = "okay"; |
| 380 |
}; |
| 381 |
|
| 382 |
&saradc { |
| 383 |
vref-supply = <&vcc_1v8>; |
| 384 |
status = "okay"; |
| 385 |
}; |
| 386 |
|
| 387 |
&sdio { |
| 388 |
bus-width = <4>; |
| 389 |
cap-sd-highspeed; |
| 390 |
cap-sdio-irq; |
| 391 |
max-frequency = <100000000>; |
| 392 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 393 |
no-mmc; |
| 394 |
no-sd; |
| 395 |
non-removable; |
| 396 |
pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>; |
| 397 |
pinctrl-names = "default"; |
| 398 |
sd-uhs-sdr104; |
| 399 |
vmmc-supply = <&vcc3v3_sys>; |
| 400 |
status = "okay"; |
| 401 |
}; |
| 402 |
|
| 403 |
&uart0 { |
| 404 |
pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>; |
| 405 |
pinctrl-names = "default"; |
| 406 |
status = "okay"; |
| 407 |
|
| 408 |
bluetooth { |
| 409 |
compatible = "realtek,rtl8822cs-bt"; |
| 410 |
device-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; |
| 411 |
enable-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>; |
| 412 |
host-wake-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; |
| 413 |
pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>; |
| 414 |
pinctrl-names = "default"; |
| 415 |
}; |
| 416 |
}; |
| 417 |
|
| 418 |
&uart2 { |
| 419 |
pinctrl-0 = <&uart2m1_xfer>; |
| 420 |
pinctrl-names = "default"; |
| 421 |
status = "okay"; |
| 422 |
}; |