| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
#include <dt-bindings/gpio/gpio.h> |
| 4 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 5 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 6 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 7 |
#include <dt-bindings/clock/rk3036-cru.h> |
| 8 |
#include <dt-bindings/soc/rockchip,boot-mode.h> |
| 9 |
#include <dt-bindings/power/rk3036-power.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
#address-cells = <1>; |
| 13 |
#size-cells = <1>; |
| 14 |
|
| 15 |
compatible = "rockchip,rk3036"; |
| 16 |
|
| 17 |
interrupt-parent = <&gic>; |
| 18 |
|
| 19 |
aliases { |
| 20 |
gpio0 = &gpio0; |
| 21 |
gpio1 = &gpio1; |
| 22 |
gpio2 = &gpio2; |
| 23 |
i2c0 = &i2c0; |
| 24 |
i2c1 = &i2c1; |
| 25 |
i2c2 = &i2c2; |
| 26 |
serial0 = &uart0; |
| 27 |
serial1 = &uart1; |
| 28 |
serial2 = &uart2; |
| 29 |
spi = &spi; |
| 30 |
}; |
| 31 |
|
| 32 |
cpus { |
| 33 |
#address-cells = <1>; |
| 34 |
#size-cells = <0>; |
| 35 |
enable-method = "rockchip,rk3036-smp"; |
| 36 |
|
| 37 |
cpu0: cpu@f00 { |
| 38 |
device_type = "cpu"; |
| 39 |
compatible = "arm,cortex-a7"; |
| 40 |
reg = <0xf00>; |
| 41 |
resets = <&cru SRST_CORE0>; |
| 42 |
operating-points = < |
| 43 |
/* KHz uV */ |
| 44 |
816000 1000000 |
| 45 |
>; |
| 46 |
clock-latency = <40000>; |
| 47 |
clocks = <&cru ARMCLK>; |
| 48 |
}; |
| 49 |
|
| 50 |
cpu1: cpu@f01 { |
| 51 |
device_type = "cpu"; |
| 52 |
compatible = "arm,cortex-a7"; |
| 53 |
reg = <0xf01>; |
| 54 |
resets = <&cru SRST_CORE1>; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
arm-pmu { |
| 59 |
compatible = "arm,cortex-a7-pmu"; |
| 60 |
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| 61 |
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| 62 |
interrupt-affinity = <&cpu0>, <&cpu1>; |
| 63 |
}; |
| 64 |
|
| 65 |
display-subsystem { |
| 66 |
compatible = "rockchip,display-subsystem"; |
| 67 |
ports = <&vop_out>; |
| 68 |
}; |
| 69 |
|
| 70 |
timer { |
| 71 |
compatible = "arm,armv7-timer"; |
| 72 |
arm,cpu-registers-not-fw-configured; |
| 73 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, |
| 74 |
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, |
| 75 |
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, |
| 76 |
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| 77 |
clock-frequency = <24000000>; |
| 78 |
}; |
| 79 |
|
| 80 |
xin24m: oscillator { |
| 81 |
compatible = "fixed-clock"; |
| 82 |
clock-frequency = <24000000>; |
| 83 |
clock-output-names = "xin24m"; |
| 84 |
#clock-cells = <0>; |
| 85 |
}; |
| 86 |
|
| 87 |
bus_intmem: sram@10080000 { |
| 88 |
compatible = "mmio-sram"; |
| 89 |
reg = <0x10080000 0x2000>; |
| 90 |
#address-cells = <1>; |
| 91 |
#size-cells = <1>; |
| 92 |
ranges = <0 0x10080000 0x2000>; |
| 93 |
|
| 94 |
smp-sram@0 { |
| 95 |
compatible = "rockchip,rk3066-smp-sram"; |
| 96 |
reg = <0x00 0x10>; |
| 97 |
}; |
| 98 |
}; |
| 99 |
|
| 100 |
gpu: gpu@10090000 { |
| 101 |
compatible = "rockchip,rk3036-mali", "arm,mali-400"; |
| 102 |
reg = <0x10090000 0x10000>; |
| 103 |
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, |
| 104 |
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, |
| 105 |
<GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, |
| 106 |
<GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; |
| 107 |
interrupt-names = "gp", |
| 108 |
"gpmmu", |
| 109 |
"pp0", |
| 110 |
"ppmmu0"; |
| 111 |
assigned-clocks = <&cru SCLK_GPU>; |
| 112 |
assigned-clock-rates = <100000000>; |
| 113 |
clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>; |
| 114 |
clock-names = "bus", "core"; |
| 115 |
power-domains = <&power RK3036_PD_GPU>; |
| 116 |
resets = <&cru SRST_GPU>; |
| 117 |
status = "disabled"; |
| 118 |
}; |
| 119 |
|
| 120 |
vpu: video-codec@10108000 { |
| 121 |
compatible = "rockchip,rk3036-vpu"; |
| 122 |
reg = <0x10108000 0x800>; |
| 123 |
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| 124 |
interrupt-names = "vdpu"; |
| 125 |
clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; |
| 126 |
clock-names = "aclk", "hclk"; |
| 127 |
iommus = <&vpu_mmu>; |
| 128 |
power-domains = <&power RK3036_PD_VPU>; |
| 129 |
}; |
| 130 |
|
| 131 |
vpu_mmu: iommu@10108800 { |
| 132 |
compatible = "rockchip,iommu"; |
| 133 |
reg = <0x10108800 0x100>; |
| 134 |
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; |
| 135 |
clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; |
| 136 |
clock-names = "aclk", "iface"; |
| 137 |
power-domains = <&power RK3036_PD_VPU>; |
| 138 |
#iommu-cells = <0>; |
| 139 |
}; |
| 140 |
|
| 141 |
vop: vop@10118000 { |
| 142 |
compatible = "rockchip,rk3036-vop"; |
| 143 |
reg = <0x10118000 0x19c>; |
| 144 |
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 145 |
clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>; |
| 146 |
clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; |
| 147 |
resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>; |
| 148 |
reset-names = "axi", "ahb", "dclk"; |
| 149 |
iommus = <&vop_mmu>; |
| 150 |
power-domains = <&power RK3036_PD_VIO>; |
| 151 |
status = "disabled"; |
| 152 |
|
| 153 |
vop_out: port { |
| 154 |
#address-cells = <1>; |
| 155 |
#size-cells = <0>; |
| 156 |
vop_out_hdmi: endpoint@0 { |
| 157 |
reg = <0>; |
| 158 |
remote-endpoint = <&hdmi_in_vop>; |
| 159 |
}; |
| 160 |
}; |
| 161 |
}; |
| 162 |
|
| 163 |
vop_mmu: iommu@10118300 { |
| 164 |
compatible = "rockchip,iommu"; |
| 165 |
reg = <0x10118300 0x100>; |
| 166 |
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 167 |
clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>; |
| 168 |
clock-names = "aclk", "iface"; |
| 169 |
power-domains = <&power RK3036_PD_VIO>; |
| 170 |
#iommu-cells = <0>; |
| 171 |
status = "disabled"; |
| 172 |
}; |
| 173 |
|
| 174 |
qos_gpu: qos@1012d000 { |
| 175 |
compatible = "rockchip,rk3036-qos", "syscon"; |
| 176 |
reg = <0x1012d000 0x20>; |
| 177 |
}; |
| 178 |
|
| 179 |
qos_vpu: qos@1012e000 { |
| 180 |
compatible = "rockchip,rk3036-qos", "syscon"; |
| 181 |
reg = <0x1012e000 0x20>; |
| 182 |
}; |
| 183 |
|
| 184 |
qos_vio: qos@1012f000 { |
| 185 |
compatible = "rockchip,rk3036-qos", "syscon"; |
| 186 |
reg = <0x1012f000 0x20>; |
| 187 |
}; |
| 188 |
|
| 189 |
gic: interrupt-controller@10139000 { |
| 190 |
compatible = "arm,gic-400"; |
| 191 |
interrupt-controller; |
| 192 |
#interrupt-cells = <3>; |
| 193 |
#address-cells = <0>; |
| 194 |
|
| 195 |
reg = <0x10139000 0x1000>, |
| 196 |
<0x1013a000 0x2000>, |
| 197 |
<0x1013c000 0x2000>, |
| 198 |
<0x1013e000 0x2000>; |
| 199 |
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; |
| 200 |
}; |
| 201 |
|
| 202 |
usb_otg: usb@10180000 { |
| 203 |
compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb", |
| 204 |
"snps,dwc2"; |
| 205 |
reg = <0x10180000 0x40000>; |
| 206 |
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 207 |
clocks = <&cru HCLK_OTG0>; |
| 208 |
clock-names = "otg"; |
| 209 |
dr_mode = "otg"; |
| 210 |
g-np-tx-fifo-size = <16>; |
| 211 |
g-rx-fifo-size = <275>; |
| 212 |
g-tx-fifo-size = <256 128 128 64 64 32>; |
| 213 |
phys = <&usb2phy_otg>; |
| 214 |
phy-names = "usb2-phy"; |
| 215 |
status = "disabled"; |
| 216 |
}; |
| 217 |
|
| 218 |
usb_host: usb@101c0000 { |
| 219 |
compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb", |
| 220 |
"snps,dwc2"; |
| 221 |
reg = <0x101c0000 0x40000>; |
| 222 |
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| 223 |
clocks = <&cru HCLK_OTG1>; |
| 224 |
clock-names = "otg"; |
| 225 |
dr_mode = "host"; |
| 226 |
phys = <&usb2phy_host>; |
| 227 |
phy-names = "usb2-phy"; |
| 228 |
status = "disabled"; |
| 229 |
}; |
| 230 |
|
| 231 |
emac: ethernet@10200000 { |
| 232 |
compatible = "rockchip,rk3036-emac"; |
| 233 |
reg = <0x10200000 0x4000>; |
| 234 |
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; |
| 235 |
rockchip,grf = <&grf>; |
| 236 |
clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>; |
| 237 |
clock-names = "hclk", "macref", "macclk"; |
| 238 |
/* |
| 239 |
* Fix the emac parent clock is DPLL instead of APLL. |
| 240 |
* since that will cause some unstable things if the cpufreq |
| 241 |
* is working. (e.g: the accurate 50MHz what mac_ref need) |
| 242 |
*/ |
| 243 |
assigned-clocks = <&cru SCLK_MACPLL>; |
| 244 |
assigned-clock-parents = <&cru PLL_DPLL>; |
| 245 |
max-speed = <100>; |
| 246 |
phy-mode = "rmii"; |
| 247 |
status = "disabled"; |
| 248 |
}; |
| 249 |
|
| 250 |
sdmmc: mmc@10214000 { |
| 251 |
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| 252 |
reg = <0x10214000 0x4000>; |
| 253 |
clock-frequency = <37500000>; |
| 254 |
max-frequency = <37500000>; |
| 255 |
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; |
| 256 |
clock-names = "biu", "ciu"; |
| 257 |
fifo-depth = <0x100>; |
| 258 |
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| 259 |
resets = <&cru SRST_MMC0>; |
| 260 |
reset-names = "reset"; |
| 261 |
status = "disabled"; |
| 262 |
}; |
| 263 |
|
| 264 |
sdio: mmc@10218000 { |
| 265 |
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| 266 |
reg = <0x10218000 0x4000>; |
| 267 |
max-frequency = <37500000>; |
| 268 |
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, |
| 269 |
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; |
| 270 |
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; |
| 271 |
fifo-depth = <0x100>; |
| 272 |
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| 273 |
resets = <&cru SRST_SDIO>; |
| 274 |
reset-names = "reset"; |
| 275 |
status = "disabled"; |
| 276 |
}; |
| 277 |
|
| 278 |
emmc: mmc@1021c000 { |
| 279 |
compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; |
| 280 |
reg = <0x1021c000 0x4000>; |
| 281 |
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| 282 |
bus-width = <8>; |
| 283 |
cap-mmc-highspeed; |
| 284 |
clock-frequency = <37500000>; |
| 285 |
max-frequency = <37500000>; |
| 286 |
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, |
| 287 |
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; |
| 288 |
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; |
| 289 |
disable-wp; |
| 290 |
dmas = <&pdma 12>; |
| 291 |
dma-names = "rx-tx"; |
| 292 |
fifo-depth = <0x100>; |
| 293 |
mmc-ddr-1_8v; |
| 294 |
non-removable; |
| 295 |
pinctrl-names = "default"; |
| 296 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
| 297 |
resets = <&cru SRST_EMMC>; |
| 298 |
reset-names = "reset"; |
| 299 |
status = "disabled"; |
| 300 |
}; |
| 301 |
|
| 302 |
i2s: i2s@10220000 { |
| 303 |
compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s"; |
| 304 |
reg = <0x10220000 0x4000>; |
| 305 |
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| 306 |
clock-names = "i2s_clk", "i2s_hclk"; |
| 307 |
clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>; |
| 308 |
dmas = <&pdma 0>, <&pdma 1>; |
| 309 |
dma-names = "tx", "rx"; |
| 310 |
pinctrl-names = "default"; |
| 311 |
pinctrl-0 = <&i2s_bus>; |
| 312 |
#sound-dai-cells = <0>; |
| 313 |
status = "disabled"; |
| 314 |
}; |
| 315 |
|
| 316 |
nfc: nand-controller@10500000 { |
| 317 |
compatible = "rockchip,rk3036-nfc", |
| 318 |
"rockchip,rk2928-nfc"; |
| 319 |
reg = <0x10500000 0x4000>; |
| 320 |
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; |
| 321 |
clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; |
| 322 |
clock-names = "ahb", "nfc"; |
| 323 |
assigned-clocks = <&cru SCLK_NANDC>; |
| 324 |
assigned-clock-rates = <150000000>; |
| 325 |
pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0 |
| 326 |
&flash_rdn &flash_rdy &flash_wrn>; |
| 327 |
pinctrl-names = "default"; |
| 328 |
status = "disabled"; |
| 329 |
}; |
| 330 |
|
| 331 |
cru: clock-controller@20000000 { |
| 332 |
compatible = "rockchip,rk3036-cru"; |
| 333 |
reg = <0x20000000 0x1000>; |
| 334 |
clocks = <&xin24m>; |
| 335 |
clock-names = "xin24m"; |
| 336 |
rockchip,grf = <&grf>; |
| 337 |
#clock-cells = <1>; |
| 338 |
#reset-cells = <1>; |
| 339 |
assigned-clocks = <&cru PLL_GPLL>; |
| 340 |
assigned-clock-rates = <594000000>; |
| 341 |
}; |
| 342 |
|
| 343 |
grf: syscon@20008000 { |
| 344 |
compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd"; |
| 345 |
reg = <0x20008000 0x1000>; |
| 346 |
#address-cells = <1>; |
| 347 |
#size-cells = <1>; |
| 348 |
|
| 349 |
usb2phy: usb2phy@17c { |
| 350 |
compatible = "rockchip,rk3036-usb2phy"; |
| 351 |
reg = <0x017c 0x20>; |
| 352 |
clocks = <&cru SCLK_OTGPHY0>; |
| 353 |
clock-names = "phyclk"; |
| 354 |
clock-output-names = "usb480m_phy"; |
| 355 |
assigned-clocks = <&cru SCLK_USB480M>; |
| 356 |
assigned-clock-parents = <&usb2phy>; |
| 357 |
#clock-cells = <0>; |
| 358 |
status = "disabled"; |
| 359 |
|
| 360 |
usb2phy_host: host-port { |
| 361 |
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; |
| 362 |
interrupt-names = "linestate"; |
| 363 |
#phy-cells = <0>; |
| 364 |
status = "disabled"; |
| 365 |
}; |
| 366 |
|
| 367 |
usb2phy_otg: otg-port { |
| 368 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, |
| 369 |
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, |
| 370 |
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| 371 |
interrupt-names = "otg-bvalid", "otg-id", |
| 372 |
"linestate"; |
| 373 |
#phy-cells = <0>; |
| 374 |
status = "disabled"; |
| 375 |
}; |
| 376 |
}; |
| 377 |
|
| 378 |
power: power-controller { |
| 379 |
compatible = "rockchip,rk3036-power-controller"; |
| 380 |
#power-domain-cells = <1>; |
| 381 |
#address-cells = <1>; |
| 382 |
#size-cells = <0>; |
| 383 |
|
| 384 |
power-domain@RK3036_PD_VIO { |
| 385 |
reg = <RK3036_PD_VIO>; |
| 386 |
clocks = <&cru ACLK_LCDC>, |
| 387 |
<&cru HCLK_LCDC>, |
| 388 |
<&cru SCLK_LCDC>; |
| 389 |
pm_qos = <&qos_vio>; |
| 390 |
#power-domain-cells = <0>; |
| 391 |
}; |
| 392 |
|
| 393 |
power-domain@RK3036_PD_VPU { |
| 394 |
reg = <RK3036_PD_VPU>; |
| 395 |
clocks = <&cru ACLK_VCODEC>, |
| 396 |
<&cru HCLK_VCODEC>; |
| 397 |
pm_qos = <&qos_vpu>; |
| 398 |
#power-domain-cells = <0>; |
| 399 |
}; |
| 400 |
|
| 401 |
power-domain@RK3036_PD_GPU { |
| 402 |
reg = <RK3036_PD_GPU>; |
| 403 |
clocks = <&cru SCLK_GPU>; |
| 404 |
pm_qos = <&qos_gpu>; |
| 405 |
#power-domain-cells = <0>; |
| 406 |
}; |
| 407 |
}; |
| 408 |
|
| 409 |
reboot-mode { |
| 410 |
compatible = "syscon-reboot-mode"; |
| 411 |
offset = <0x1d8>; |
| 412 |
mode-normal = <BOOT_NORMAL>; |
| 413 |
mode-recovery = <BOOT_RECOVERY>; |
| 414 |
mode-bootloader = <BOOT_FASTBOOT>; |
| 415 |
mode-loader = <BOOT_BL_DOWNLOAD>; |
| 416 |
}; |
| 417 |
}; |
| 418 |
|
| 419 |
acodec: audio-codec@20030000 { |
| 420 |
compatible = "rockchip,rk3036-codec"; |
| 421 |
reg = <0x20030000 0x4000>; |
| 422 |
clock-names = "acodec_pclk"; |
| 423 |
clocks = <&cru PCLK_ACODEC>; |
| 424 |
rockchip,grf = <&grf>; |
| 425 |
#sound-dai-cells = <0>; |
| 426 |
status = "disabled"; |
| 427 |
}; |
| 428 |
|
| 429 |
hdmi: hdmi@20034000 { |
| 430 |
compatible = "rockchip,rk3036-inno-hdmi"; |
| 431 |
reg = <0x20034000 0x4000>; |
| 432 |
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| 433 |
clocks = <&cru PCLK_HDMI>, <&cru SCLK_LCDC>; |
| 434 |
clock-names = "pclk", "ref"; |
| 435 |
rockchip,grf = <&grf>; |
| 436 |
pinctrl-names = "default"; |
| 437 |
pinctrl-0 = <&hdmi_ctl>; |
| 438 |
#sound-dai-cells = <0>; |
| 439 |
status = "disabled"; |
| 440 |
|
| 441 |
ports { |
| 442 |
#address-cells = <1>; |
| 443 |
#size-cells = <0>; |
| 444 |
|
| 445 |
hdmi_in: port@0 { |
| 446 |
reg = <0>; |
| 447 |
|
| 448 |
hdmi_in_vop: endpoint { |
| 449 |
remote-endpoint = <&vop_out_hdmi>; |
| 450 |
}; |
| 451 |
}; |
| 452 |
|
| 453 |
hdmi_out: port@1 { |
| 454 |
reg = <1>; |
| 455 |
}; |
| 456 |
}; |
| 457 |
}; |
| 458 |
|
| 459 |
timer: timer@20044000 { |
| 460 |
compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer"; |
| 461 |
reg = <0x20044000 0x20>; |
| 462 |
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; |
| 463 |
clocks = <&cru PCLK_TIMER>, <&xin24m>; |
| 464 |
clock-names = "pclk", "timer"; |
| 465 |
}; |
| 466 |
|
| 467 |
pwm0: pwm@20050000 { |
| 468 |
compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; |
| 469 |
reg = <0x20050000 0x10>; |
| 470 |
#pwm-cells = <3>; |
| 471 |
clocks = <&cru PCLK_PWM>; |
| 472 |
pinctrl-names = "default"; |
| 473 |
pinctrl-0 = <&pwm0_pin>; |
| 474 |
status = "disabled"; |
| 475 |
}; |
| 476 |
|
| 477 |
pwm1: pwm@20050010 { |
| 478 |
compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; |
| 479 |
reg = <0x20050010 0x10>; |
| 480 |
#pwm-cells = <3>; |
| 481 |
clocks = <&cru PCLK_PWM>; |
| 482 |
pinctrl-names = "default"; |
| 483 |
pinctrl-0 = <&pwm1_pin>; |
| 484 |
status = "disabled"; |
| 485 |
}; |
| 486 |
|
| 487 |
pwm2: pwm@20050020 { |
| 488 |
compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; |
| 489 |
reg = <0x20050020 0x10>; |
| 490 |
#pwm-cells = <3>; |
| 491 |
clocks = <&cru PCLK_PWM>; |
| 492 |
pinctrl-names = "default"; |
| 493 |
pinctrl-0 = <&pwm2_pin>; |
| 494 |
status = "disabled"; |
| 495 |
}; |
| 496 |
|
| 497 |
pwm3: pwm@20050030 { |
| 498 |
compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; |
| 499 |
reg = <0x20050030 0x10>; |
| 500 |
#pwm-cells = <2>; |
| 501 |
clocks = <&cru PCLK_PWM>; |
| 502 |
pinctrl-names = "default"; |
| 503 |
pinctrl-0 = <&pwm3_pin>; |
| 504 |
status = "disabled"; |
| 505 |
}; |
| 506 |
|
| 507 |
i2c1: i2c@20056000 { |
| 508 |
compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; |
| 509 |
reg = <0x20056000 0x1000>; |
| 510 |
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 511 |
#address-cells = <1>; |
| 512 |
#size-cells = <0>; |
| 513 |
clock-names = "i2c"; |
| 514 |
clocks = <&cru PCLK_I2C1>; |
| 515 |
pinctrl-names = "default"; |
| 516 |
pinctrl-0 = <&i2c1_xfer>; |
| 517 |
status = "disabled"; |
| 518 |
}; |
| 519 |
|
| 520 |
i2c2: i2c@2005a000 { |
| 521 |
compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; |
| 522 |
reg = <0x2005a000 0x1000>; |
| 523 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 524 |
#address-cells = <1>; |
| 525 |
#size-cells = <0>; |
| 526 |
clock-names = "i2c"; |
| 527 |
clocks = <&cru PCLK_I2C2>; |
| 528 |
pinctrl-names = "default"; |
| 529 |
pinctrl-0 = <&i2c2_xfer>; |
| 530 |
status = "disabled"; |
| 531 |
}; |
| 532 |
|
| 533 |
uart0: serial@20060000 { |
| 534 |
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; |
| 535 |
reg = <0x20060000 0x100>; |
| 536 |
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| 537 |
reg-shift = <2>; |
| 538 |
reg-io-width = <4>; |
| 539 |
clock-frequency = <24000000>; |
| 540 |
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; |
| 541 |
clock-names = "baudclk", "apb_pclk"; |
| 542 |
pinctrl-names = "default"; |
| 543 |
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; |
| 544 |
status = "disabled"; |
| 545 |
}; |
| 546 |
|
| 547 |
uart1: serial@20064000 { |
| 548 |
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; |
| 549 |
reg = <0x20064000 0x100>; |
| 550 |
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| 551 |
reg-shift = <2>; |
| 552 |
reg-io-width = <4>; |
| 553 |
clock-frequency = <24000000>; |
| 554 |
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; |
| 555 |
clock-names = "baudclk", "apb_pclk"; |
| 556 |
pinctrl-names = "default"; |
| 557 |
pinctrl-0 = <&uart1_xfer>; |
| 558 |
status = "disabled"; |
| 559 |
}; |
| 560 |
|
| 561 |
uart2: serial@20068000 { |
| 562 |
compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; |
| 563 |
reg = <0x20068000 0x100>; |
| 564 |
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; |
| 565 |
reg-shift = <2>; |
| 566 |
reg-io-width = <4>; |
| 567 |
clock-frequency = <24000000>; |
| 568 |
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; |
| 569 |
clock-names = "baudclk", "apb_pclk"; |
| 570 |
pinctrl-names = "default"; |
| 571 |
pinctrl-0 = <&uart2_xfer>; |
| 572 |
status = "disabled"; |
| 573 |
}; |
| 574 |
|
| 575 |
i2c0: i2c@20072000 { |
| 576 |
compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; |
| 577 |
reg = <0x20072000 0x1000>; |
| 578 |
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 579 |
#address-cells = <1>; |
| 580 |
#size-cells = <0>; |
| 581 |
clock-names = "i2c"; |
| 582 |
clocks = <&cru PCLK_I2C0>; |
| 583 |
pinctrl-names = "default"; |
| 584 |
pinctrl-0 = <&i2c0_xfer>; |
| 585 |
status = "disabled"; |
| 586 |
}; |
| 587 |
|
| 588 |
spi: spi@20074000 { |
| 589 |
compatible = "rockchip,rk3036-spi"; |
| 590 |
reg = <0x20074000 0x1000>; |
| 591 |
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| 592 |
clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>; |
| 593 |
clock-names = "spiclk", "apb_pclk"; |
| 594 |
dmas = <&pdma 8>, <&pdma 9>; |
| 595 |
dma-names = "tx", "rx"; |
| 596 |
pinctrl-names = "default"; |
| 597 |
pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>; |
| 598 |
#address-cells = <1>; |
| 599 |
#size-cells = <0>; |
| 600 |
status = "disabled"; |
| 601 |
}; |
| 602 |
|
| 603 |
pdma: dma-controller@20078000 { |
| 604 |
compatible = "arm,pl330", "arm,primecell"; |
| 605 |
reg = <0x20078000 0x4000>; |
| 606 |
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| 607 |
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 608 |
#dma-cells = <1>; |
| 609 |
arm,pl330-broken-no-flushp; |
| 610 |
arm,pl330-periph-burst; |
| 611 |
clocks = <&cru ACLK_DMAC2>; |
| 612 |
clock-names = "apb_pclk"; |
| 613 |
}; |
| 614 |
|
| 615 |
pinctrl: pinctrl { |
| 616 |
compatible = "rockchip,rk3036-pinctrl"; |
| 617 |
rockchip,grf = <&grf>; |
| 618 |
#address-cells = <1>; |
| 619 |
#size-cells = <1>; |
| 620 |
ranges; |
| 621 |
|
| 622 |
gpio0: gpio@2007c000 { |
| 623 |
compatible = "rockchip,gpio-bank"; |
| 624 |
reg = <0x2007c000 0x100>; |
| 625 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 626 |
clocks = <&cru PCLK_GPIO0>; |
| 627 |
|
| 628 |
gpio-controller; |
| 629 |
#gpio-cells = <2>; |
| 630 |
|
| 631 |
interrupt-controller; |
| 632 |
#interrupt-cells = <2>; |
| 633 |
}; |
| 634 |
|
| 635 |
gpio1: gpio@20080000 { |
| 636 |
compatible = "rockchip,gpio-bank"; |
| 637 |
reg = <0x20080000 0x100>; |
| 638 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 639 |
clocks = <&cru PCLK_GPIO1>; |
| 640 |
|
| 641 |
gpio-controller; |
| 642 |
#gpio-cells = <2>; |
| 643 |
|
| 644 |
interrupt-controller; |
| 645 |
#interrupt-cells = <2>; |
| 646 |
}; |
| 647 |
|
| 648 |
gpio2: gpio@20084000 { |
| 649 |
compatible = "rockchip,gpio-bank"; |
| 650 |
reg = <0x20084000 0x100>; |
| 651 |
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 652 |
clocks = <&cru PCLK_GPIO2>; |
| 653 |
|
| 654 |
gpio-controller; |
| 655 |
#gpio-cells = <2>; |
| 656 |
|
| 657 |
interrupt-controller; |
| 658 |
#interrupt-cells = <2>; |
| 659 |
}; |
| 660 |
|
| 661 |
pcfg_pull_default: pcfg-pull-default { |
| 662 |
bias-pull-pin-default; |
| 663 |
}; |
| 664 |
|
| 665 |
pcfg_pull_none: pcfg-pull-none { |
| 666 |
bias-disable; |
| 667 |
}; |
| 668 |
|
| 669 |
pwm0 { |
| 670 |
pwm0_pin: pwm0-pin { |
| 671 |
rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; |
| 672 |
}; |
| 673 |
}; |
| 674 |
|
| 675 |
pwm1 { |
| 676 |
pwm1_pin: pwm1-pin { |
| 677 |
rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>; |
| 678 |
}; |
| 679 |
}; |
| 680 |
|
| 681 |
pwm2 { |
| 682 |
pwm2_pin: pwm2-pin { |
| 683 |
rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>; |
| 684 |
}; |
| 685 |
}; |
| 686 |
|
| 687 |
pwm3 { |
| 688 |
pwm3_pin: pwm3-pin { |
| 689 |
rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>; |
| 690 |
}; |
| 691 |
}; |
| 692 |
|
| 693 |
sdmmc { |
| 694 |
sdmmc_clk: sdmmc-clk { |
| 695 |
rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>; |
| 696 |
}; |
| 697 |
|
| 698 |
sdmmc_cmd: sdmmc-cmd { |
| 699 |
rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>; |
| 700 |
}; |
| 701 |
|
| 702 |
sdmmc_cd: sdmmc-cd { |
| 703 |
rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>; |
| 704 |
}; |
| 705 |
|
| 706 |
sdmmc_bus1: sdmmc-bus1 { |
| 707 |
rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>; |
| 708 |
}; |
| 709 |
|
| 710 |
sdmmc_bus4: sdmmc-bus4 { |
| 711 |
rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>, |
| 712 |
<1 RK_PC3 1 &pcfg_pull_default>, |
| 713 |
<1 RK_PC4 1 &pcfg_pull_default>, |
| 714 |
<1 RK_PC5 1 &pcfg_pull_default>; |
| 715 |
}; |
| 716 |
}; |
| 717 |
|
| 718 |
sdio { |
| 719 |
sdio_bus1: sdio-bus1 { |
| 720 |
rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>; |
| 721 |
}; |
| 722 |
|
| 723 |
sdio_bus4: sdio-bus4 { |
| 724 |
rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>, |
| 725 |
<0 RK_PB4 1 &pcfg_pull_default>, |
| 726 |
<0 RK_PB5 1 &pcfg_pull_default>, |
| 727 |
<0 RK_PB6 1 &pcfg_pull_default>; |
| 728 |
}; |
| 729 |
|
| 730 |
sdio_cmd: sdio-cmd { |
| 731 |
rockchip,pins = <0 RK_PB0 1 &pcfg_pull_default>; |
| 732 |
}; |
| 733 |
|
| 734 |
sdio_clk: sdio-clk { |
| 735 |
rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none>; |
| 736 |
}; |
| 737 |
}; |
| 738 |
|
| 739 |
emmc { |
| 740 |
/* |
| 741 |
* We run eMMC at max speed; bump up drive strength. |
| 742 |
* We also have external pulls, so disable the internal ones. |
| 743 |
*/ |
| 744 |
emmc_clk: emmc-clk { |
| 745 |
rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>; |
| 746 |
}; |
| 747 |
|
| 748 |
emmc_cmd: emmc-cmd { |
| 749 |
rockchip,pins = <2 RK_PA1 2 &pcfg_pull_default>; |
| 750 |
}; |
| 751 |
|
| 752 |
emmc_bus8: emmc-bus8 { |
| 753 |
rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>, |
| 754 |
<1 RK_PD1 2 &pcfg_pull_default>, |
| 755 |
<1 RK_PD2 2 &pcfg_pull_default>, |
| 756 |
<1 RK_PD3 2 &pcfg_pull_default>, |
| 757 |
<1 RK_PD4 2 &pcfg_pull_default>, |
| 758 |
<1 RK_PD5 2 &pcfg_pull_default>, |
| 759 |
<1 RK_PD6 2 &pcfg_pull_default>, |
| 760 |
<1 RK_PD7 2 &pcfg_pull_default>; |
| 761 |
}; |
| 762 |
}; |
| 763 |
|
| 764 |
nfc { |
| 765 |
flash_ale: flash-ale { |
| 766 |
rockchip,pins = <2 RK_PA0 1 &pcfg_pull_default>; |
| 767 |
}; |
| 768 |
|
| 769 |
flash_bus8: flash-bus8 { |
| 770 |
rockchip,pins = <1 RK_PD0 1 &pcfg_pull_default>, |
| 771 |
<1 RK_PD1 1 &pcfg_pull_default>, |
| 772 |
<1 RK_PD2 1 &pcfg_pull_default>, |
| 773 |
<1 RK_PD3 1 &pcfg_pull_default>, |
| 774 |
<1 RK_PD4 1 &pcfg_pull_default>, |
| 775 |
<1 RK_PD5 1 &pcfg_pull_default>, |
| 776 |
<1 RK_PD6 1 &pcfg_pull_default>, |
| 777 |
<1 RK_PD7 1 &pcfg_pull_default>; |
| 778 |
}; |
| 779 |
|
| 780 |
flash_cle: flash-cle { |
| 781 |
rockchip,pins = <2 RK_PA1 1 &pcfg_pull_default>; |
| 782 |
}; |
| 783 |
|
| 784 |
flash_csn0: flash-csn0 { |
| 785 |
rockchip,pins = <2 RK_PA6 1 &pcfg_pull_default>; |
| 786 |
}; |
| 787 |
|
| 788 |
flash_rdn: flash-rdn { |
| 789 |
rockchip,pins = <2 RK_PA3 1 &pcfg_pull_default>; |
| 790 |
}; |
| 791 |
|
| 792 |
flash_rdy: flash-rdy { |
| 793 |
rockchip,pins = <2 RK_PA4 1 &pcfg_pull_default>; |
| 794 |
}; |
| 795 |
|
| 796 |
flash_wrn: flash-wrn { |
| 797 |
rockchip,pins = <2 RK_PA2 1 &pcfg_pull_default>; |
| 798 |
}; |
| 799 |
}; |
| 800 |
|
| 801 |
emac { |
| 802 |
emac_xfer: emac-xfer { |
| 803 |
rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */ |
| 804 |
<2 RK_PB5 1 &pcfg_pull_default>, /* tx_en */ |
| 805 |
<2 RK_PB6 1 &pcfg_pull_default>, /* mac_clk */ |
| 806 |
<2 RK_PB7 1 &pcfg_pull_default>, /* rx_err */ |
| 807 |
<2 RK_PC0 1 &pcfg_pull_default>, /* rxd1 */ |
| 808 |
<2 RK_PC1 1 &pcfg_pull_default>, /* rxd0 */ |
| 809 |
<2 RK_PC2 1 &pcfg_pull_default>, /* txd1 */ |
| 810 |
<2 RK_PC3 1 &pcfg_pull_default>; /* txd0 */ |
| 811 |
}; |
| 812 |
|
| 813 |
emac_mdio: emac-mdio { |
| 814 |
rockchip,pins = <2 RK_PB4 1 &pcfg_pull_default>, /* mac_md */ |
| 815 |
<2 RK_PD1 1 &pcfg_pull_default>; /* mac_mdclk */ |
| 816 |
}; |
| 817 |
}; |
| 818 |
|
| 819 |
i2c0 { |
| 820 |
i2c0_xfer: i2c0-xfer { |
| 821 |
rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>, |
| 822 |
<0 RK_PA1 1 &pcfg_pull_none>; |
| 823 |
}; |
| 824 |
}; |
| 825 |
|
| 826 |
i2c1 { |
| 827 |
i2c1_xfer: i2c1-xfer { |
| 828 |
rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>, |
| 829 |
<0 RK_PA3 1 &pcfg_pull_none>; |
| 830 |
}; |
| 831 |
}; |
| 832 |
|
| 833 |
i2c2 { |
| 834 |
i2c2_xfer: i2c2-xfer { |
| 835 |
rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>, |
| 836 |
<2 RK_PC5 1 &pcfg_pull_none>; |
| 837 |
}; |
| 838 |
}; |
| 839 |
|
| 840 |
i2s { |
| 841 |
i2s_bus: i2s-bus { |
| 842 |
rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>, |
| 843 |
<1 RK_PA1 1 &pcfg_pull_default>, |
| 844 |
<1 RK_PA2 1 &pcfg_pull_default>, |
| 845 |
<1 RK_PA3 1 &pcfg_pull_default>, |
| 846 |
<1 RK_PA4 1 &pcfg_pull_default>, |
| 847 |
<1 RK_PA5 1 &pcfg_pull_default>; |
| 848 |
}; |
| 849 |
}; |
| 850 |
|
| 851 |
hdmi { |
| 852 |
hdmi_ctl: hdmi-ctl { |
| 853 |
rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, |
| 854 |
<1 RK_PB1 1 &pcfg_pull_none>, |
| 855 |
<1 RK_PB2 1 &pcfg_pull_none>, |
| 856 |
<1 RK_PB3 1 &pcfg_pull_none>; |
| 857 |
}; |
| 858 |
}; |
| 859 |
|
| 860 |
uart0 { |
| 861 |
uart0_xfer: uart0-xfer { |
| 862 |
rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>, |
| 863 |
<0 RK_PC1 1 &pcfg_pull_none>; |
| 864 |
}; |
| 865 |
|
| 866 |
uart0_cts: uart0-cts { |
| 867 |
rockchip,pins = <0 RK_PC2 1 &pcfg_pull_default>; |
| 868 |
}; |
| 869 |
|
| 870 |
uart0_rts: uart0-rts { |
| 871 |
rockchip,pins = <0 RK_PC3 1 &pcfg_pull_none>; |
| 872 |
}; |
| 873 |
}; |
| 874 |
|
| 875 |
uart1 { |
| 876 |
uart1_xfer: uart1-xfer { |
| 877 |
rockchip,pins = <2 RK_PC6 1 &pcfg_pull_default>, |
| 878 |
<2 RK_PC7 1 &pcfg_pull_none>; |
| 879 |
}; |
| 880 |
/* no rts / cts for uart1 */ |
| 881 |
}; |
| 882 |
|
| 883 |
uart2 { |
| 884 |
uart2_xfer: uart2-xfer { |
| 885 |
rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>, |
| 886 |
<1 RK_PC3 2 &pcfg_pull_none>; |
| 887 |
}; |
| 888 |
/* no rts / cts for uart2 */ |
| 889 |
}; |
| 890 |
|
| 891 |
spi-pins { |
| 892 |
spi_txd:spi-txd { |
| 893 |
rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>; |
| 894 |
}; |
| 895 |
|
| 896 |
spi_rxd:spi-rxd { |
| 897 |
rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>; |
| 898 |
}; |
| 899 |
|
| 900 |
spi_clk:spi-clk { |
| 901 |
rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>; |
| 902 |
}; |
| 903 |
|
| 904 |
spi_cs0:spi-cs0 { |
| 905 |
rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>; |
| 906 |
|
| 907 |
}; |
| 908 |
|
| 909 |
spi_cs1:spi-cs1 { |
| 910 |
rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>; |
| 911 |
|
| 912 |
}; |
| 913 |
}; |
| 914 |
}; |
| 915 |
}; |