| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2018 MundoReader S.L. |
| 4 |
* Author: Heiko Stuebner <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
/dts-v1/; |
| 8 |
#include <dt-bindings/i2c/i2c.h> |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 11 |
#include "rk3188.dtsi" |
| 12 |
|
| 13 |
/ { |
| 14 |
model = "BQ Edison2 Quad-Core"; |
| 15 |
compatible = "mundoreader,bq-edison2qc", "rockchip,rk3188"; |
| 16 |
|
| 17 |
aliases { |
| 18 |
mmc0 = &mmc0; |
| 19 |
mmc1 = &mmc1; |
| 20 |
mmc2 = &emmc; |
| 21 |
}; |
| 22 |
|
| 23 |
memory@60000000 { |
| 24 |
device_type = "memory"; |
| 25 |
reg = <0x60000000 0x80000000>; |
| 26 |
}; |
| 27 |
|
| 28 |
backlight: backlight { |
| 29 |
compatible = "pwm-backlight"; |
| 30 |
power-supply = <&vsys>; |
| 31 |
pwms = <&pwm1 0 25000>; |
| 32 |
}; |
| 33 |
|
| 34 |
gpio-keys { |
| 35 |
compatible = "gpio-keys"; |
| 36 |
autorepeat; |
| 37 |
pinctrl-names = "default"; |
| 38 |
pinctrl-0 = <&pwr_key &usb_int>; |
| 39 |
|
| 40 |
key-power { |
| 41 |
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| 42 |
linux,code = <KEY_POWER>; |
| 43 |
label = "GPIO Key Power"; |
| 44 |
linux,input-type = <1>; |
| 45 |
debounce-interval = <100>; |
| 46 |
wakeup-source; |
| 47 |
}; |
| 48 |
|
| 49 |
wake_on_usb: key-wake-on-usb { |
| 50 |
label = "Wake-on-USB"; |
| 51 |
gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; |
| 52 |
linux,code = <KEY_WAKEUP>; |
| 53 |
wakeup-source; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
gpio-poweroff { |
| 58 |
compatible = "gpio-poweroff"; |
| 59 |
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>; |
| 60 |
pinctrl-names = "default"; |
| 61 |
pinctrl-0 = <&pwr_hold>; |
| 62 |
/* only drive the pin low until device is off */ |
| 63 |
active-delay-ms = <3000>; |
| 64 |
}; |
| 65 |
|
| 66 |
lvds-encoder { |
| 67 |
compatible = "ti,sn75lvds83", "lvds-encoder"; |
| 68 |
|
| 69 |
ports { |
| 70 |
#address-cells = <1>; |
| 71 |
#size-cells = <0>; |
| 72 |
|
| 73 |
port@0 { |
| 74 |
reg = <0>; |
| 75 |
|
| 76 |
lvds_in_vop0: endpoint { |
| 77 |
remote-endpoint = <&vop0_out_lvds>; |
| 78 |
}; |
| 79 |
}; |
| 80 |
|
| 81 |
port@1 { |
| 82 |
reg = <1>; |
| 83 |
|
| 84 |
lvds_out_panel: endpoint { |
| 85 |
remote-endpoint = <&panel_in_lvds>; |
| 86 |
}; |
| 87 |
}; |
| 88 |
}; |
| 89 |
}; |
| 90 |
|
| 91 |
panel { |
| 92 |
compatible = "innolux,ee101ia-01d", "panel-lvds"; |
| 93 |
backlight = <&backlight>; |
| 94 |
|
| 95 |
/* pin LCD_CS, Nshtdn input of lvds-encoder */ |
| 96 |
enable-gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; |
| 97 |
pinctrl-names = "default"; |
| 98 |
pinctrl-0 = <&lcd_cs>; |
| 99 |
power-supply = <&vcc_lcd>; |
| 100 |
|
| 101 |
data-mapping = "vesa-24"; |
| 102 |
height-mm = <163>; |
| 103 |
width-mm = <261>; |
| 104 |
|
| 105 |
panel-timing { |
| 106 |
clock-frequency = <72000000>; |
| 107 |
hactive = <1280>; |
| 108 |
vactive = <800>; |
| 109 |
hback-porch = <160>; |
| 110 |
hfront-porch = <16>; |
| 111 |
hsync-len = <10>; |
| 112 |
vback-porch = <23>; |
| 113 |
vfront-porch = <12>; |
| 114 |
vsync-len = <3>; |
| 115 |
}; |
| 116 |
|
| 117 |
port { |
| 118 |
panel_in_lvds: endpoint { |
| 119 |
remote-endpoint = <&lvds_out_panel>; |
| 120 |
}; |
| 121 |
}; |
| 122 |
}; |
| 123 |
|
| 124 |
sdio_pwrseq: sdio-pwrseq { |
| 125 |
compatible = "mmc-pwrseq-simple"; |
| 126 |
clocks = <&hym8563>; |
| 127 |
clock-names = "ext_clock"; |
| 128 |
pinctrl-names = "default"; |
| 129 |
pinctrl-0 = <&wifi_reg_on>; |
| 130 |
reset-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_LOW>; |
| 131 |
}; |
| 132 |
|
| 133 |
avdd_cif: regulator-cif-avdd { |
| 134 |
compatible = "regulator-fixed"; |
| 135 |
regulator-name = "avdd-cif"; |
| 136 |
regulator-min-microvolt = <2800000>; |
| 137 |
regulator-max-microvolt = <2800000>; |
| 138 |
gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; |
| 139 |
pinctrl-names = "default"; |
| 140 |
pinctrl-0 = <&cif_avdd_en>; |
| 141 |
startup-delay-us = <100000>; |
| 142 |
vin-supply = <&vcc28_cif>; |
| 143 |
}; |
| 144 |
|
| 145 |
vcc_5v: regulator-vcc-5v { |
| 146 |
compatible = "regulator-fixed"; |
| 147 |
regulator-name = "vcc-5v"; |
| 148 |
regulator-min-microvolt = <5000000>; |
| 149 |
regulator-max-microvolt = <5000000>; |
| 150 |
enable-active-high; |
| 151 |
gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; |
| 152 |
pinctrl-names = "default"; |
| 153 |
pinctrl-0 = <&v5_drv>; |
| 154 |
vin-supply = <&vsys>; |
| 155 |
}; |
| 156 |
|
| 157 |
vcc_lcd: regulator-lcd { |
| 158 |
compatible = "regulator-fixed"; |
| 159 |
regulator-name = "vcc-lcd"; |
| 160 |
gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>; |
| 161 |
pinctrl-names = "default"; |
| 162 |
pinctrl-0 = <&lcd_en>; |
| 163 |
startup-delay-us = <50000>; |
| 164 |
vin-supply = <&vcc_io>; |
| 165 |
}; |
| 166 |
|
| 167 |
vcc_otg: regulator-usb-otg { |
| 168 |
compatible = "regulator-fixed"; |
| 169 |
regulator-name = "vcc-otg"; |
| 170 |
regulator-min-microvolt = <5000000>; |
| 171 |
regulator-max-microvolt = <5000000>; |
| 172 |
enable-active-high; |
| 173 |
gpio = <&gpio3 RK_PB1 GPIO_ACTIVE_HIGH>; |
| 174 |
pinctrl-names = "default"; |
| 175 |
pinctrl-0 = <&otg_drv>; |
| 176 |
startup-delay-us = <100000>; |
| 177 |
vin-supply = <&vcc_5v>; |
| 178 |
}; |
| 179 |
|
| 180 |
vcc_sd: regulator-sdmmc { |
| 181 |
compatible = "regulator-fixed"; |
| 182 |
regulator-name = "vcc-sd"; |
| 183 |
regulator-min-microvolt = <3300000>; |
| 184 |
regulator-max-microvolt = <3300000>; |
| 185 |
gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; |
| 186 |
pinctrl-names = "default"; |
| 187 |
pinctrl-0 = <&sdmmc_pwr>; |
| 188 |
startup-delay-us = <100000>; |
| 189 |
vin-supply = <&vcc_io>; |
| 190 |
}; |
| 191 |
|
| 192 |
vccq_emmc: regulator-emmc-vccq { |
| 193 |
compatible = "regulator-fixed"; |
| 194 |
regulator-name = "vccq-emmc"; |
| 195 |
regulator-min-microvolt = <2800000>; |
| 196 |
regulator-max-microvolt = <2800000>; |
| 197 |
vin-supply = <&vcc_io>; |
| 198 |
}; |
| 199 |
|
| 200 |
/* supplied from the bq24196 */ |
| 201 |
vsys: regulator-vsys { |
| 202 |
compatible = "regulator-fixed"; |
| 203 |
regulator-name = "vsys"; |
| 204 |
regulator-min-microvolt = <5000000>; |
| 205 |
regulator-max-microvolt = <5000000>; |
| 206 |
regulator-boot-on; |
| 207 |
}; |
| 208 |
}; |
| 209 |
|
| 210 |
&cpu0 { |
| 211 |
cpu-supply = <&vdd_arm>; |
| 212 |
}; |
| 213 |
|
| 214 |
&cpu1 { |
| 215 |
cpu-supply = <&vdd_arm>; |
| 216 |
}; |
| 217 |
|
| 218 |
&cpu2 { |
| 219 |
cpu-supply = <&vdd_arm>; |
| 220 |
}; |
| 221 |
|
| 222 |
&cpu3 { |
| 223 |
cpu-supply = <&vdd_arm>; |
| 224 |
}; |
| 225 |
|
| 226 |
&cru { |
| 227 |
assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>, |
| 228 |
<&cru ACLK_CPU>, |
| 229 |
<&cru HCLK_CPU>, <&cru PCLK_CPU>, |
| 230 |
<&cru ACLK_PERI>, <&cru HCLK_PERI>, |
| 231 |
<&cru PCLK_PERI>; |
| 232 |
assigned-clock-rates = <594000000>, <504000000>, |
| 233 |
<300000000>, |
| 234 |
<150000000>, <75000000>, |
| 235 |
<300000000>, <150000000>, |
| 236 |
<75000000>; |
| 237 |
}; |
| 238 |
|
| 239 |
&emmc { |
| 240 |
bus-width = <8>; |
| 241 |
cap-mmc-highspeed; |
| 242 |
non-removable; |
| 243 |
pinctrl-names = "default"; |
| 244 |
pinctrl-0 = <&emmc_clk &emmc_cmd>; |
| 245 |
vmmc-supply = <&vcc_io>; |
| 246 |
vqmmc-supply = <&vccq_emmc>; |
| 247 |
status = "okay"; |
| 248 |
}; |
| 249 |
|
| 250 |
&gpu { |
| 251 |
status = "okay"; |
| 252 |
}; |
| 253 |
|
| 254 |
&i2c0 { |
| 255 |
clock-frequency = <400000>; |
| 256 |
status = "okay"; |
| 257 |
|
| 258 |
lis3de: accelerometer@29 { |
| 259 |
compatible = "st,lis3de"; |
| 260 |
reg = <0x29>; |
| 261 |
interrupt-parent = <&gpio0>; |
| 262 |
interrupts = <RK_PB7 IRQ_TYPE_EDGE_RISING>; |
| 263 |
pinctrl-names = "default"; |
| 264 |
pinctrl-0 = <&gsensor_int>; |
| 265 |
rotation-matrix = "1", "0", "0", |
| 266 |
"0", "-1", "0", |
| 267 |
"0", "0", "1"; |
| 268 |
vdd-supply = <&vcc_io>; |
| 269 |
}; |
| 270 |
}; |
| 271 |
|
| 272 |
&i2c1 { |
| 273 |
clock-frequency = <400000>; |
| 274 |
status = "okay"; |
| 275 |
|
| 276 |
tmp108@48 { |
| 277 |
compatible = "ti,tmp108"; |
| 278 |
reg = <0x48>; |
| 279 |
interrupt-parent = <&gpio1>; |
| 280 |
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; |
| 281 |
pinctrl-names = "default"; |
| 282 |
pinctrl-0 = <&tmp_alrt>; |
| 283 |
#thermal-sensor-cells = <0>; |
| 284 |
}; |
| 285 |
|
| 286 |
hym8563: rtc@51 { |
| 287 |
compatible = "haoyu,hym8563"; |
| 288 |
reg = <0x51>; |
| 289 |
interrupt-parent = <&gpio0>; |
| 290 |
interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; |
| 291 |
pinctrl-names = "default"; |
| 292 |
pinctrl-0 = <&rtc_int>; |
| 293 |
#clock-cells = <0>; |
| 294 |
clock-output-names = "xin32k"; |
| 295 |
}; |
| 296 |
|
| 297 |
bat: battery@55 { |
| 298 |
compatible = "ti,bq27541"; |
| 299 |
reg = <0x55>; |
| 300 |
power-supplies = <&bq24196>; |
| 301 |
}; |
| 302 |
|
| 303 |
act8846: pmic@5a { |
| 304 |
compatible = "active-semi,act8846"; |
| 305 |
reg = <0x5a>; |
| 306 |
pinctrl-names = "default"; |
| 307 |
pinctrl-0 = <&dvs0_ctl &pmic_int>; |
| 308 |
|
| 309 |
vp1-supply = <&vsys>; |
| 310 |
vp2-supply = <&vsys>; |
| 311 |
vp3-supply = <&vsys>; |
| 312 |
vp4-supply = <&vsys>; |
| 313 |
inl1-supply = <&vcc_io>; |
| 314 |
inl2-supply = <&vsys>; |
| 315 |
inl3-supply = <&vsys>; |
| 316 |
|
| 317 |
regulators { |
| 318 |
vcc_ddr: REG1 { |
| 319 |
regulator-name = "VCC_DDR"; |
| 320 |
regulator-min-microvolt = <1200000>; |
| 321 |
regulator-max-microvolt = <1200000>; |
| 322 |
regulator-always-on; |
| 323 |
}; |
| 324 |
|
| 325 |
vdd_log: REG2 { |
| 326 |
regulator-name = "VDD_LOG"; |
| 327 |
regulator-min-microvolt = <1000000>; |
| 328 |
regulator-max-microvolt = <1200000>; |
| 329 |
regulator-always-on; |
| 330 |
}; |
| 331 |
|
| 332 |
vdd_arm: REG3 { |
| 333 |
regulator-name = "VDD_ARM"; |
| 334 |
regulator-min-microvolt = <875000>; |
| 335 |
regulator-max-microvolt = <1350000>; |
| 336 |
regulator-always-on; |
| 337 |
}; |
| 338 |
|
| 339 |
vcc_io: vcc_hdmi: REG4 { |
| 340 |
regulator-name = "VCC_IO"; |
| 341 |
regulator-min-microvolt = <3000000>; |
| 342 |
regulator-max-microvolt = <3000000>; |
| 343 |
regulator-always-on; |
| 344 |
}; |
| 345 |
|
| 346 |
vdd_10: REG5 { |
| 347 |
regulator-name = "VDD_10"; |
| 348 |
regulator-min-microvolt = <1000000>; |
| 349 |
regulator-max-microvolt = <1000000>; |
| 350 |
regulator-always-on; |
| 351 |
}; |
| 352 |
|
| 353 |
vdd_12: REG6 { |
| 354 |
regulator-name = "VDD_12"; |
| 355 |
regulator-min-microvolt = <1200000>; |
| 356 |
regulator-max-microvolt = <1200000>; |
| 357 |
regulator-always-on; |
| 358 |
}; |
| 359 |
|
| 360 |
vcc18_cif: REG7 { |
| 361 |
regulator-name = "VCC18_CIF"; |
| 362 |
regulator-min-microvolt = <1800000>; |
| 363 |
regulator-max-microvolt = <1800000>; |
| 364 |
regulator-always-on; |
| 365 |
}; |
| 366 |
|
| 367 |
vcca_33: REG8 { |
| 368 |
regulator-name = "VCCA_33"; |
| 369 |
regulator-min-microvolt = <3300000>; |
| 370 |
regulator-max-microvolt = <3300000>; |
| 371 |
regulator-always-on; |
| 372 |
}; |
| 373 |
|
| 374 |
vcc_tp: REG9 { |
| 375 |
regulator-name = "VCC_TP"; |
| 376 |
regulator-min-microvolt = <3300000>; |
| 377 |
regulator-max-microvolt = <3300000>; |
| 378 |
regulator-always-on; |
| 379 |
}; |
| 380 |
|
| 381 |
vccio_wl: REG10 { |
| 382 |
regulator-name = "VCCIO_WL"; |
| 383 |
regulator-min-microvolt = <2800000>; |
| 384 |
regulator-max-microvolt = <2800000>; |
| 385 |
regulator-always-on; |
| 386 |
}; |
| 387 |
|
| 388 |
vcc_18: REG11 { |
| 389 |
regulator-name = "VCC_18"; |
| 390 |
regulator-min-microvolt = <1800000>; |
| 391 |
regulator-max-microvolt = <1800000>; |
| 392 |
regulator-always-on; |
| 393 |
}; |
| 394 |
|
| 395 |
vcc28_cif: REG12 { |
| 396 |
regulator-name = "VCC28_CIF"; |
| 397 |
regulator-min-microvolt = <2800000>; |
| 398 |
regulator-max-microvolt = <2800000>; |
| 399 |
regulator-always-on; |
| 400 |
}; |
| 401 |
}; |
| 402 |
}; |
| 403 |
|
| 404 |
bq24196: charger@6b { |
| 405 |
compatible = "ti,bq24196"; |
| 406 |
reg = <0x6b>; |
| 407 |
interrupt-parent = <&gpio0>; |
| 408 |
interrupts = <RK_PD7 IRQ_TYPE_EDGE_FALLING>; |
| 409 |
pinctrl-names = "default"; |
| 410 |
pinctrl-0 = <&charger_int &chg_ctl &otg_en>; |
| 411 |
ti,system-minimum-microvolt = <3200000>; |
| 412 |
monitored-battery = <&bat>; |
| 413 |
omit-battery-class; |
| 414 |
|
| 415 |
usb_otg_vbus: usb-otg-vbus { }; |
| 416 |
}; |
| 417 |
}; |
| 418 |
|
| 419 |
&i2c2 { |
| 420 |
clock-frequency = <400000>; |
| 421 |
status = "okay"; |
| 422 |
|
| 423 |
ft5606: touchscreen@3e { |
| 424 |
compatible = "edt,edt-ft5506"; |
| 425 |
reg = <0x3e>; |
| 426 |
interrupt-parent = <&gpio1>; |
| 427 |
interrupts = <RK_PB7 IRQ_TYPE_EDGE_FALLING>; |
| 428 |
pinctrl-names = "default"; |
| 429 |
pinctrl-0 = <&tp_int &tp_rst>; |
| 430 |
reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; |
| 431 |
touchscreen-inverted-y; |
| 432 |
/* hw ts resolution does not match display */ |
| 433 |
touchscreen-size-y = <1024>; |
| 434 |
touchscreen-size-x = <768>; |
| 435 |
touchscreen-swapped-x-y; |
| 436 |
}; |
| 437 |
}; |
| 438 |
|
| 439 |
&i2c3 { |
| 440 |
clock-frequency = <400000>; |
| 441 |
status = "okay"; |
| 442 |
}; |
| 443 |
|
| 444 |
&i2c4 { |
| 445 |
clock-frequency = <400000>; |
| 446 |
status = "okay"; |
| 447 |
|
| 448 |
rt5616: codec@1b { |
| 449 |
compatible = "realtek,rt5616"; |
| 450 |
reg = <0x1b>; |
| 451 |
clocks = <&cru SCLK_I2S0>; |
| 452 |
clock-names = "mclk"; |
| 453 |
#sound-dai-cells = <0>; |
| 454 |
}; |
| 455 |
}; |
| 456 |
|
| 457 |
&i2s0 { |
| 458 |
status = "okay"; |
| 459 |
}; |
| 460 |
|
| 461 |
&mmc0 { |
| 462 |
bus-width = <4>; |
| 463 |
cap-mmc-highspeed; |
| 464 |
cap-sd-highspeed; |
| 465 |
disable-wp; |
| 466 |
pinctrl-names = "default"; |
| 467 |
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; |
| 468 |
vmmc-supply = <&vcc_sd>; |
| 469 |
status = "okay"; |
| 470 |
}; |
| 471 |
|
| 472 |
&mmc1 { |
| 473 |
bus-width = <4>; |
| 474 |
cap-sd-highspeed; |
| 475 |
keep-power-in-suspend; |
| 476 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 477 |
non-removable; |
| 478 |
pinctrl-names = "default"; |
| 479 |
pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; |
| 480 |
vqmmc-supply = <&vccio_wl>; |
| 481 |
#address-cells = <1>; |
| 482 |
#size-cells = <0>; |
| 483 |
status = "okay"; |
| 484 |
|
| 485 |
brcmf: wifi@1 { |
| 486 |
reg = <1>; |
| 487 |
compatible = "brcm,bcm4329-fmac"; |
| 488 |
interrupt-parent = <&gpio3>; |
| 489 |
interrupts = <RK_PD2 IRQ_TYPE_NONE>; |
| 490 |
interrupt-names = "host-wake"; |
| 491 |
brcm,drive-strength = <5>; |
| 492 |
pinctrl-names = "default"; |
| 493 |
pinctrl-0 = <&wifi_host_wake>; |
| 494 |
}; |
| 495 |
}; |
| 496 |
|
| 497 |
&pwm1 { |
| 498 |
status = "okay"; |
| 499 |
}; |
| 500 |
|
| 501 |
&pinctrl { |
| 502 |
pcfg_output_high: pcfg-output-high { |
| 503 |
output-high; |
| 504 |
}; |
| 505 |
|
| 506 |
pcfg_output_low: pcfg-output-low { |
| 507 |
output-low; |
| 508 |
}; |
| 509 |
|
| 510 |
act8846 { |
| 511 |
dvs0_ctl: dvs0-ctl { |
| 512 |
rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>; |
| 513 |
}; |
| 514 |
|
| 515 |
pmic_int: pmic-int { |
| 516 |
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 517 |
}; |
| 518 |
}; |
| 519 |
|
| 520 |
bq24196 { |
| 521 |
charger_int: charger-int { |
| 522 |
rockchip,pins = <0 RK_PD7 RK_FUNC_GPIO &pcfg_pull_up>; |
| 523 |
}; |
| 524 |
|
| 525 |
/* pin hog to make it select usb profile */ |
| 526 |
chg_ctl: chg-ctl { |
| 527 |
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_output_high>; |
| 528 |
}; |
| 529 |
|
| 530 |
/* low: charging, high: complete, fault: blinking */ |
| 531 |
chg_det: chg-det { |
| 532 |
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 533 |
}; |
| 534 |
|
| 535 |
/* charging enabled when pin low and register set */ |
| 536 |
chg_en: chg-en { |
| 537 |
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>; |
| 538 |
}; |
| 539 |
|
| 540 |
/* bq29196 powergood (when low) signal */ |
| 541 |
dc_det: dc-det { |
| 542 |
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 543 |
}; |
| 544 |
|
| 545 |
/* wire bq24196 otg pin to high, to enable 500mA charging */ |
| 546 |
otg_en: otg-en { |
| 547 |
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_output_high>; |
| 548 |
}; |
| 549 |
}; |
| 550 |
|
| 551 |
camera { |
| 552 |
cif0_pdn: cif0-pdn { |
| 553 |
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 554 |
}; |
| 555 |
|
| 556 |
cif1_pdn: cif1-pdn { |
| 557 |
rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 558 |
}; |
| 559 |
|
| 560 |
cif_avdd_en: cif-avdd-en { |
| 561 |
rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 562 |
}; |
| 563 |
}; |
| 564 |
|
| 565 |
display { |
| 566 |
lcd_cs: lcd-cs { |
| 567 |
rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 568 |
}; |
| 569 |
|
| 570 |
lcd_en: lcd-en { |
| 571 |
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 572 |
}; |
| 573 |
}; |
| 574 |
|
| 575 |
ft5606 { |
| 576 |
tp_int: tp-int { |
| 577 |
rockchip,pins = <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>; |
| 578 |
}; |
| 579 |
|
| 580 |
tp_rst: tp-rst { |
| 581 |
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 582 |
}; |
| 583 |
}; |
| 584 |
|
| 585 |
hdmi { |
| 586 |
hdmi_int: hdmi-int { |
| 587 |
rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; |
| 588 |
}; |
| 589 |
|
| 590 |
hdmi_rst: hdmi-rst { |
| 591 |
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 592 |
}; |
| 593 |
}; |
| 594 |
|
| 595 |
hym8563 { |
| 596 |
rtc_int: rtc-int { |
| 597 |
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 598 |
}; |
| 599 |
}; |
| 600 |
|
| 601 |
keys { |
| 602 |
pwr_hold: pwr-hold { |
| 603 |
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 604 |
}; |
| 605 |
|
| 606 |
pwr_key: pwr-key { |
| 607 |
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; |
| 608 |
}; |
| 609 |
}; |
| 610 |
|
| 611 |
lis3de { |
| 612 |
gsensor_int: gsensor-int { |
| 613 |
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 614 |
}; |
| 615 |
}; |
| 616 |
|
| 617 |
mmc { |
| 618 |
sdmmc_pwr: sdmmc-pwr { |
| 619 |
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 620 |
}; |
| 621 |
}; |
| 622 |
|
| 623 |
tmp108 { |
| 624 |
tmp_alrt: tmp-alrt { |
| 625 |
rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 626 |
}; |
| 627 |
}; |
| 628 |
|
| 629 |
usb { |
| 630 |
v5_drv: v5-drv { |
| 631 |
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 632 |
}; |
| 633 |
|
| 634 |
otg_drv: otg-drv { |
| 635 |
rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 636 |
}; |
| 637 |
|
| 638 |
usb_int: usb-int { |
| 639 |
rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; |
| 640 |
}; |
| 641 |
}; |
| 642 |
|
| 643 |
rk903 { |
| 644 |
bt_host_wake: bt-host-wake { |
| 645 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 646 |
}; |
| 647 |
|
| 648 |
bt_reg_on: bt-reg-on { |
| 649 |
rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 650 |
}; |
| 651 |
|
| 652 |
/* pin hog to pull the reset high */ |
| 653 |
bt_rst: bt-rst { |
| 654 |
rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_output_high>; |
| 655 |
}; |
| 656 |
|
| 657 |
bt_wake: bt-wake { |
| 658 |
rockchip,pins = <3 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 659 |
}; |
| 660 |
|
| 661 |
wifi_host_wake: wifi-host-wake { |
| 662 |
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 663 |
}; |
| 664 |
|
| 665 |
wifi_reg_on: wifi-reg-on { |
| 666 |
rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 667 |
}; |
| 668 |
}; |
| 669 |
}; |
| 670 |
|
| 671 |
&saradc { |
| 672 |
vref-supply = <&vcc_18>; |
| 673 |
status = "okay"; |
| 674 |
}; |
| 675 |
|
| 676 |
&spdif { |
| 677 |
status = "okay"; |
| 678 |
}; |
| 679 |
|
| 680 |
&uart0 { |
| 681 |
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; |
| 682 |
status = "okay"; |
| 683 |
|
| 684 |
bluetooth { |
| 685 |
compatible = "brcm,bcm43438-bt"; |
| 686 |
max-speed = <2000000>; |
| 687 |
device-wakeup-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_HIGH>; |
| 688 |
host-wakeup-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 689 |
shutdown-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>; |
| 690 |
pinctrl-names = "default"; |
| 691 |
pinctrl-0 = <&bt_host_wake &bt_reg_on &bt_rst &bt_wake>; |
| 692 |
}; |
| 693 |
}; |
| 694 |
|
| 695 |
&uart1 { |
| 696 |
status = "okay"; |
| 697 |
}; |
| 698 |
|
| 699 |
&uart2 { |
| 700 |
status = "okay"; |
| 701 |
}; |
| 702 |
|
| 703 |
&uart3 { |
| 704 |
pinctrl-0 = <&uart3_xfer &uart3_cts &uart3_rts>; |
| 705 |
status = "okay"; |
| 706 |
}; |
| 707 |
|
| 708 |
&usbphy { |
| 709 |
status = "okay"; |
| 710 |
}; |
| 711 |
|
| 712 |
&usb_host { |
| 713 |
status = "okay"; |
| 714 |
}; |
| 715 |
|
| 716 |
&usb_otg { |
| 717 |
status = "okay"; |
| 718 |
}; |
| 719 |
|
| 720 |
&vop0 { |
| 721 |
status = "okay"; |
| 722 |
}; |
| 723 |
|
| 724 |
&vop0_out { |
| 725 |
vop0_out_lvds: endpoint { |
| 726 |
remote-endpoint = <&lvds_in_vop0>; |
| 727 |
}; |
| 728 |
}; |
| 729 |
|
| 730 |
&vop1 { |
| 731 |
pinctrl-names = "default"; |
| 732 |
pinctrl-0 = <&lcdc1_dclk &lcdc1_den &lcdc1_hsync |
| 733 |
&lcdc1_vsync &lcdc1_rgb24>; |
| 734 |
status = "okay"; |
| 735 |
}; |
| 736 |
|
| 737 |
&wdt { |
| 738 |
status = "okay"; |
| 739 |
}; |