| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
#include <dt-bindings/pwm/pwm.h> |
| 4 |
#include "rk3288.dtsi" |
| 5 |
|
| 6 |
/ { |
| 7 |
memory@0 { |
| 8 |
reg = <0x0 0x0 0x0 0x80000000>; |
| 9 |
device_type = "memory"; |
| 10 |
}; |
| 11 |
|
| 12 |
emmc_pwrseq: emmc-pwrseq { |
| 13 |
compatible = "mmc-pwrseq-emmc"; |
| 14 |
pinctrl-0 = <&emmc_reset>; |
| 15 |
pinctrl-names = "default"; |
| 16 |
reset-gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>; |
| 17 |
}; |
| 18 |
|
| 19 |
ext_gmac: external-gmac-clock { |
| 20 |
compatible = "fixed-clock"; |
| 21 |
#clock-cells = <0>; |
| 22 |
clock-frequency = <125000000>; |
| 23 |
clock-output-names = "ext_gmac"; |
| 24 |
}; |
| 25 |
|
| 26 |
vcc_flash: regulator-flash { |
| 27 |
compatible = "regulator-fixed"; |
| 28 |
regulator-name = "vcc_flash"; |
| 29 |
regulator-min-microvolt = <1800000>; |
| 30 |
regulator-max-microvolt = <1800000>; |
| 31 |
startup-delay-us = <150>; |
| 32 |
vin-supply = <&vcc_io>; |
| 33 |
}; |
| 34 |
|
| 35 |
vcc_sys: regulator-vsys { |
| 36 |
compatible = "regulator-fixed"; |
| 37 |
regulator-name = "vcc_sys"; |
| 38 |
regulator-min-microvolt = <5000000>; |
| 39 |
regulator-max-microvolt = <5000000>; |
| 40 |
regulator-always-on; |
| 41 |
regulator-boot-on; |
| 42 |
}; |
| 43 |
}; |
| 44 |
|
| 45 |
&cpu0 { |
| 46 |
cpu0-supply = <&vdd_cpu>; |
| 47 |
}; |
| 48 |
|
| 49 |
&emmc { |
| 50 |
bus-width = <8>; |
| 51 |
cap-mmc-highspeed; |
| 52 |
disable-wp; |
| 53 |
non-removable; |
| 54 |
mmc-pwrseq = <&emmc_pwrseq>; |
| 55 |
pinctrl-names = "default"; |
| 56 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
| 57 |
vmmc-supply = <&vcc_io>; |
| 58 |
vqmmc-supply = <&vcc_flash>; |
| 59 |
status = "okay"; |
| 60 |
}; |
| 61 |
|
| 62 |
&gmac { |
| 63 |
assigned-clocks = <&cru SCLK_MAC>; |
| 64 |
assigned-clock-parents = <&ext_gmac>; |
| 65 |
clock_in_out = "input"; |
| 66 |
phy-mode = "rgmii"; |
| 67 |
phy-supply = <&vccio_pmu>; |
| 68 |
pinctrl-names = "default"; |
| 69 |
pinctrl-0 = <&rgmii_pins &phy_rst>; |
| 70 |
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_LOW>; |
| 71 |
snps,reset-active-low; |
| 72 |
snps,reset-delays-us = <0 10000 30000>; |
| 73 |
rx_delay = <0x10>; |
| 74 |
tx_delay = <0x30>; |
| 75 |
}; |
| 76 |
|
| 77 |
&gpu { |
| 78 |
mali-supply = <&vdd_gpu>; |
| 79 |
status = "okay"; |
| 80 |
}; |
| 81 |
|
| 82 |
&i2c0 { |
| 83 |
status = "okay"; |
| 84 |
|
| 85 |
act8846: act8846@5a { |
| 86 |
compatible = "active-semi,act8846"; |
| 87 |
reg = <0x5a>; |
| 88 |
system-power-controller; |
| 89 |
inl1-supply = <&vcc_io>; |
| 90 |
inl2-supply = <&vcc_sys>; |
| 91 |
inl3-supply = <&vcc_20>; |
| 92 |
vp1-supply = <&vcc_sys>; |
| 93 |
vp2-supply = <&vcc_sys>; |
| 94 |
vp3-supply = <&vcc_sys>; |
| 95 |
vp4-supply = <&vcc_sys>; |
| 96 |
|
| 97 |
regulators { |
| 98 |
vcc_ddr: REG1 { |
| 99 |
regulator-name = "VCC_DDR"; |
| 100 |
regulator-min-microvolt = <1200000>; |
| 101 |
regulator-max-microvolt = <1200000>; |
| 102 |
regulator-always-on; |
| 103 |
}; |
| 104 |
|
| 105 |
vcc_io: vccio_codec: REG2 { |
| 106 |
regulator-name = "VCC_IO"; |
| 107 |
regulator-min-microvolt = <3300000>; |
| 108 |
regulator-max-microvolt = <3300000>; |
| 109 |
regulator-always-on; |
| 110 |
}; |
| 111 |
|
| 112 |
vdd_log: REG3 { |
| 113 |
regulator-name = "VDD_LOG"; |
| 114 |
regulator-min-microvolt = <1000000>; |
| 115 |
regulator-max-microvolt = <1000000>; |
| 116 |
regulator-always-on; |
| 117 |
}; |
| 118 |
|
| 119 |
vcc_20: REG4 { |
| 120 |
regulator-name = "VCC_20"; |
| 121 |
regulator-min-microvolt = <2000000>; |
| 122 |
regulator-max-microvolt = <2000000>; |
| 123 |
regulator-always-on; |
| 124 |
}; |
| 125 |
|
| 126 |
vccio_sd: REG5 { |
| 127 |
regulator-name = "VCCIO_SD"; |
| 128 |
regulator-min-microvolt = <3300000>; |
| 129 |
regulator-max-microvolt = <3300000>; |
| 130 |
regulator-always-on; |
| 131 |
}; |
| 132 |
|
| 133 |
vdd10_lcd: REG6 { |
| 134 |
regulator-name = "VDD10_LCD"; |
| 135 |
regulator-min-microvolt = <1000000>; |
| 136 |
regulator-max-microvolt = <1000000>; |
| 137 |
regulator-always-on; |
| 138 |
}; |
| 139 |
|
| 140 |
vcca_codec: REG7 { |
| 141 |
regulator-name = "VCCA_CODEC"; |
| 142 |
regulator-min-microvolt = <3300000>; |
| 143 |
regulator-max-microvolt = <3300000>; |
| 144 |
regulator-always-on; |
| 145 |
}; |
| 146 |
|
| 147 |
vcca_tp: REG8 { |
| 148 |
regulator-name = "VCCA_TP"; |
| 149 |
regulator-min-microvolt = <3300000>; |
| 150 |
regulator-max-microvolt = <3300000>; |
| 151 |
regulator-always-on; |
| 152 |
}; |
| 153 |
|
| 154 |
vccio_pmu: REG9 { |
| 155 |
regulator-name = "VCCIO_PMU"; |
| 156 |
regulator-min-microvolt = <3300000>; |
| 157 |
regulator-max-microvolt = <3300000>; |
| 158 |
regulator-always-on; |
| 159 |
}; |
| 160 |
|
| 161 |
vdd_10: REG10 { |
| 162 |
regulator-name = "VDD_10"; |
| 163 |
regulator-min-microvolt = <1000000>; |
| 164 |
regulator-max-microvolt = <1000000>; |
| 165 |
regulator-always-on; |
| 166 |
}; |
| 167 |
|
| 168 |
vcc_18: REG11 { |
| 169 |
regulator-name = "VCC_18"; |
| 170 |
regulator-min-microvolt = <1800000>; |
| 171 |
regulator-max-microvolt = <1800000>; |
| 172 |
regulator-always-on; |
| 173 |
}; |
| 174 |
|
| 175 |
vcc18_lcd: REG12 { |
| 176 |
regulator-name = "VCC18_LCD"; |
| 177 |
regulator-min-microvolt = <1800000>; |
| 178 |
regulator-max-microvolt = <1800000>; |
| 179 |
regulator-always-on; |
| 180 |
}; |
| 181 |
}; |
| 182 |
}; |
| 183 |
|
| 184 |
vdd_cpu: syr827@40 { |
| 185 |
compatible = "silergy,syr827"; |
| 186 |
reg = <0x40>; |
| 187 |
fcs,suspend-voltage-selector = <1>; |
| 188 |
regulator-always-on; |
| 189 |
regulator-boot-on; |
| 190 |
regulator-enable-ramp-delay = <300>; |
| 191 |
regulator-name = "vdd_cpu"; |
| 192 |
regulator-min-microvolt = <850000>; |
| 193 |
regulator-max-microvolt = <1350000>; |
| 194 |
regulator-ramp-delay = <8000>; |
| 195 |
vin-supply = <&vcc_sys>; |
| 196 |
}; |
| 197 |
|
| 198 |
vdd_gpu: syr828@41 { |
| 199 |
compatible = "silergy,syr828"; |
| 200 |
reg = <0x41>; |
| 201 |
fcs,suspend-voltage-selector = <1>; |
| 202 |
regulator-always-on; |
| 203 |
regulator-enable-ramp-delay = <300>; |
| 204 |
regulator-min-microvolt = <850000>; |
| 205 |
regulator-max-microvolt = <1350000>; |
| 206 |
regulator-name = "vdd_gpu"; |
| 207 |
regulator-ramp-delay = <8000>; |
| 208 |
vin-supply = <&vcc_sys>; |
| 209 |
}; |
| 210 |
}; |
| 211 |
|
| 212 |
&io_domains { |
| 213 |
status = "okay"; |
| 214 |
|
| 215 |
audio-supply = <&vcc_io>; |
| 216 |
bb-supply = <&vcc_io>; |
| 217 |
dvp-supply = <&vcc_18>; |
| 218 |
flash0-supply = <&vcc_flash>; |
| 219 |
flash1-supply = <&vccio_pmu>; |
| 220 |
gpio30-supply = <&vccio_pmu>; |
| 221 |
gpio1830-supply = <&vcc_io>; |
| 222 |
lcdc-supply = <&vcc_io>; |
| 223 |
sdcard-supply = <&vccio_sd>; |
| 224 |
wifi-supply = <&vcc_18>; |
| 225 |
}; |
| 226 |
|
| 227 |
&pinctrl { |
| 228 |
pcfg_output_high: pcfg-output-high { |
| 229 |
output-high; |
| 230 |
}; |
| 231 |
|
| 232 |
emmc { |
| 233 |
emmc_reset: emmc-reset { |
| 234 |
rockchip,pins = <3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
gmac { |
| 239 |
phy_rst: phy-rst { |
| 240 |
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; |
| 241 |
}; |
| 242 |
}; |
| 243 |
}; |
| 244 |
|
| 245 |
&saradc { |
| 246 |
vref-supply = <&vcc_18>; |
| 247 |
}; |
| 248 |
|
| 249 |
&tsadc { |
| 250 |
rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ |
| 251 |
rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ |
| 252 |
status = "okay"; |
| 253 |
}; |
| 254 |
|
| 255 |
&vopb { |
| 256 |
status = "okay"; |
| 257 |
}; |
| 258 |
|
| 259 |
&vopb_mmu { |
| 260 |
status = "okay"; |
| 261 |
}; |
| 262 |
|
| 263 |
&vopl { |
| 264 |
status = "okay"; |
| 265 |
}; |
| 266 |
|
| 267 |
&vopl_mmu { |
| 268 |
status = "okay"; |
| 269 |
}; |
| 270 |
|
| 271 |
&wdt { |
| 272 |
status = "okay"; |
| 273 |
}; |