| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Google Veyron Pinky Rev 2 board device tree source |
| 4 |
* |
| 5 |
* Copyright 2015 Google, Inc |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
#include "rk3288-veyron-chromebook.dtsi" |
| 10 |
#include "../cros-ec-sbs.dtsi" |
| 11 |
|
| 12 |
/ { |
| 13 |
model = "Google Pinky"; |
| 14 |
compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", |
| 15 |
"google,veyron", "rockchip,rk3288"; |
| 16 |
|
| 17 |
/delete-node/regulator-backlight; |
| 18 |
/delete-node/regulator-panel; |
| 19 |
/delete-node/emmc-pwrseq; |
| 20 |
/delete-node/vcc18-lcd; |
| 21 |
}; |
| 22 |
|
| 23 |
&backlight { |
| 24 |
/delete-property/power-supply; |
| 25 |
}; |
| 26 |
|
| 27 |
&emmc { |
| 28 |
/* |
| 29 |
* Use a pullup instead of a drive since the output is 3.3V and |
| 30 |
* really should be 1.8V (oops). The external pulldown will help |
| 31 |
* bring the voltage down if we only drive with a pullup here. |
| 32 |
* Therefore disable the powerseq (and actual reset) for pinky. |
| 33 |
*/ |
| 34 |
/delete-property/mmc-pwrseq; |
| 35 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>; |
| 36 |
}; |
| 37 |
|
| 38 |
&edp { |
| 39 |
/delete-property/pinctrl-names; |
| 40 |
/delete-property/pinctrl-0; |
| 41 |
|
| 42 |
force-hpd; |
| 43 |
}; |
| 44 |
|
| 45 |
&lid_switch { |
| 46 |
pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; |
| 47 |
|
| 48 |
key-power { |
| 49 |
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
/* Touchpad connector */ |
| 54 |
&i2c3 { |
| 55 |
status = "okay"; |
| 56 |
|
| 57 |
clock-frequency = <400000>; |
| 58 |
i2c-scl-falling-time-ns = <50>; |
| 59 |
i2c-scl-rising-time-ns = <300>; |
| 60 |
}; |
| 61 |
|
| 62 |
&panel { |
| 63 |
power-supply = <&vcc33_lcd>; |
| 64 |
}; |
| 65 |
|
| 66 |
&pinctrl { |
| 67 |
pinctrl-names = "default", "sleep"; |
| 68 |
pinctrl-0 = < |
| 69 |
/* Common for sleep and wake, but no owners */ |
| 70 |
&ddr0_retention |
| 71 |
&ddrio_pwroff |
| 72 |
&global_pwroff |
| 73 |
|
| 74 |
/* Wake only */ |
| 75 |
&suspend_l_wake |
| 76 |
&bt_dev_wake_awake |
| 77 |
>; |
| 78 |
pinctrl-1 = < |
| 79 |
/* Common for sleep and wake, but no owners */ |
| 80 |
&ddr0_retention |
| 81 |
&ddrio_pwroff |
| 82 |
&global_pwroff |
| 83 |
|
| 84 |
/* Sleep only */ |
| 85 |
&suspend_l_sleep |
| 86 |
&bt_dev_wake_sleep |
| 87 |
>; |
| 88 |
|
| 89 |
/delete-node/ lcd; |
| 90 |
|
| 91 |
backlight { |
| 92 |
/delete-node/ bl_pwr_en; |
| 93 |
}; |
| 94 |
|
| 95 |
buttons { |
| 96 |
pwr_key_h: pwr-key-h { |
| 97 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 98 |
}; |
| 99 |
}; |
| 100 |
|
| 101 |
emmc { |
| 102 |
emmc_reset: emmc-reset { |
| 103 |
rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>; |
| 104 |
}; |
| 105 |
}; |
| 106 |
|
| 107 |
sdmmc { |
| 108 |
sdmmc_wp_pin: sdmmc-wp-pin { |
| 109 |
rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 110 |
}; |
| 111 |
}; |
| 112 |
}; |
| 113 |
|
| 114 |
&rk808 { |
| 115 |
regulators { |
| 116 |
vcc18_lcd: SWITCH_REG2 { |
| 117 |
regulator-always-on; |
| 118 |
regulator-boot-on; |
| 119 |
regulator-name = "vcc18_lcd"; |
| 120 |
regulator-state-mem { |
| 121 |
regulator-off-in-suspend; |
| 122 |
}; |
| 123 |
}; |
| 124 |
}; |
| 125 |
}; |
| 126 |
|
| 127 |
&sdmmc { |
| 128 |
pinctrl-names = "default"; |
| 129 |
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin |
| 130 |
&sdmmc_wp_pin &sdmmc_bus4>; |
| 131 |
wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>; |
| 132 |
}; |
| 133 |
|
| 134 |
&tsadc { |
| 135 |
/* Some connection is flaky making the tsadc hang the system */ |
| 136 |
status = "disabled"; |
| 137 |
}; |