| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Google Veyron (and derivatives) board device tree source |
| 4 |
* |
| 5 |
* Copyright 2015 Google, Inc |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/clock/rockchip,rk808.h> |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include "rk3288.dtsi" |
| 11 |
|
| 12 |
/ { |
| 13 |
aliases { |
| 14 |
mmc0 = &emmc; |
| 15 |
}; |
| 16 |
|
| 17 |
chosen { |
| 18 |
stdout-path = "serial2:115200n8"; |
| 19 |
}; |
| 20 |
|
| 21 |
/* |
| 22 |
* The default coreboot on veyron devices ignores memory@0 nodes |
| 23 |
* and would instead create another memory node. |
| 24 |
*/ |
| 25 |
memory { |
| 26 |
device_type = "memory"; |
| 27 |
reg = <0x0 0x0 0x0 0x80000000>; |
| 28 |
}; |
| 29 |
|
| 30 |
|
| 31 |
power_button: power-button { |
| 32 |
compatible = "gpio-keys"; |
| 33 |
pinctrl-names = "default"; |
| 34 |
pinctrl-0 = <&pwr_key_l>; |
| 35 |
|
| 36 |
key-power { |
| 37 |
label = "Power"; |
| 38 |
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; |
| 39 |
linux,code = <KEY_POWER>; |
| 40 |
debounce-interval = <100>; |
| 41 |
wakeup-source; |
| 42 |
}; |
| 43 |
}; |
| 44 |
|
| 45 |
gpio-restart { |
| 46 |
compatible = "gpio-restart"; |
| 47 |
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; |
| 48 |
pinctrl-names = "default"; |
| 49 |
pinctrl-0 = <&ap_warm_reset_h>; |
| 50 |
priority = <200>; |
| 51 |
}; |
| 52 |
|
| 53 |
emmc_pwrseq: emmc-pwrseq { |
| 54 |
compatible = "mmc-pwrseq-emmc"; |
| 55 |
pinctrl-0 = <&emmc_reset>; |
| 56 |
pinctrl-names = "default"; |
| 57 |
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; |
| 58 |
}; |
| 59 |
|
| 60 |
sdio_pwrseq: sdio-pwrseq { |
| 61 |
compatible = "mmc-pwrseq-simple"; |
| 62 |
clocks = <&rk808 RK808_CLKOUT1>; |
| 63 |
clock-names = "ext_clock"; |
| 64 |
pinctrl-names = "default"; |
| 65 |
pinctrl-0 = <&wifi_enable_h>; |
| 66 |
|
| 67 |
/* |
| 68 |
* Depending on the actual card populated GPIO4 D4 |
| 69 |
* correspond to one of these signals on the module: |
| 70 |
* |
| 71 |
* D4: |
| 72 |
* - SDIO_RESET_L_WL_REG_ON |
| 73 |
* - PDN (power down when low) |
| 74 |
*/ |
| 75 |
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; |
| 76 |
}; |
| 77 |
|
| 78 |
vcc_5v: regulator-vcc-5v { |
| 79 |
compatible = "regulator-fixed"; |
| 80 |
regulator-name = "vcc_5v"; |
| 81 |
regulator-always-on; |
| 82 |
regulator-boot-on; |
| 83 |
regulator-min-microvolt = <5000000>; |
| 84 |
regulator-max-microvolt = <5000000>; |
| 85 |
}; |
| 86 |
|
| 87 |
vcc33_sys: regulator-vcc33-sys { |
| 88 |
compatible = "regulator-fixed"; |
| 89 |
regulator-name = "vcc33_sys"; |
| 90 |
regulator-always-on; |
| 91 |
regulator-boot-on; |
| 92 |
regulator-min-microvolt = <3300000>; |
| 93 |
regulator-max-microvolt = <3300000>; |
| 94 |
}; |
| 95 |
|
| 96 |
vcc50_hdmi: regulator-vcc50-hdmi { |
| 97 |
compatible = "regulator-fixed"; |
| 98 |
regulator-name = "vcc50_hdmi"; |
| 99 |
regulator-always-on; |
| 100 |
regulator-boot-on; |
| 101 |
vin-supply = <&vcc_5v>; |
| 102 |
}; |
| 103 |
|
| 104 |
vdd_logic: regulator-vdd-logic { |
| 105 |
compatible = "pwm-regulator"; |
| 106 |
regulator-name = "vdd_logic"; |
| 107 |
|
| 108 |
pwms = <&pwm1 0 1994 0>; |
| 109 |
pwm-supply = <&vcc33_sys>; |
| 110 |
|
| 111 |
pwm-dutycycle-range = <0x7b 0>; |
| 112 |
pwm-dutycycle-unit = <0x94>; |
| 113 |
|
| 114 |
regulator-always-on; |
| 115 |
regulator-boot-on; |
| 116 |
regulator-min-microvolt = <950000>; |
| 117 |
regulator-max-microvolt = <1350000>; |
| 118 |
regulator-ramp-delay = <4000>; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
&cpu0 { |
| 123 |
cpu0-supply = <&vdd_cpu>; |
| 124 |
}; |
| 125 |
|
| 126 |
&cpu_crit { |
| 127 |
temperature = <100000>; |
| 128 |
}; |
| 129 |
|
| 130 |
/* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */ |
| 131 |
&cpu_opp_table { |
| 132 |
/delete-node/ opp-312000000; |
| 133 |
|
| 134 |
opp-1512000000 { |
| 135 |
opp-microvolt = <1250000>; |
| 136 |
}; |
| 137 |
opp-1608000000 { |
| 138 |
opp-microvolt = <1300000>; |
| 139 |
}; |
| 140 |
opp-1704000000 { |
| 141 |
opp-hz = /bits/ 64 <1704000000>; |
| 142 |
opp-microvolt = <1350000>; |
| 143 |
}; |
| 144 |
opp-1800000000 { |
| 145 |
opp-hz = /bits/ 64 <1800000000>; |
| 146 |
opp-microvolt = <1400000>; |
| 147 |
}; |
| 148 |
}; |
| 149 |
|
| 150 |
&emmc { |
| 151 |
status = "okay"; |
| 152 |
|
| 153 |
bus-width = <8>; |
| 154 |
cap-mmc-highspeed; |
| 155 |
rockchip,default-sample-phase = <158>; |
| 156 |
disable-wp; |
| 157 |
mmc-hs200-1_8v; |
| 158 |
mmc-pwrseq = <&emmc_pwrseq>; |
| 159 |
non-removable; |
| 160 |
pinctrl-names = "default"; |
| 161 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
| 162 |
}; |
| 163 |
|
| 164 |
&gpu { |
| 165 |
mali-supply = <&vdd_gpu>; |
| 166 |
status = "okay"; |
| 167 |
}; |
| 168 |
|
| 169 |
&gpu_alert0 { |
| 170 |
temperature = <72500>; |
| 171 |
}; |
| 172 |
|
| 173 |
&gpu_crit { |
| 174 |
temperature = <100000>; |
| 175 |
}; |
| 176 |
|
| 177 |
&hdmi { |
| 178 |
pinctrl-names = "default", "unwedge"; |
| 179 |
pinctrl-0 = <&hdmi_ddc>; |
| 180 |
pinctrl-1 = <&hdmi_ddc_unwedge>; |
| 181 |
status = "okay"; |
| 182 |
}; |
| 183 |
|
| 184 |
&i2c0 { |
| 185 |
status = "okay"; |
| 186 |
|
| 187 |
clock-frequency = <400000>; |
| 188 |
i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */ |
| 189 |
i2c-scl-rising-time-ns = <100>; /* 45ns measured */ |
| 190 |
|
| 191 |
rk808: pmic@1b { |
| 192 |
compatible = "rockchip,rk808"; |
| 193 |
reg = <0x1b>; |
| 194 |
clock-output-names = "xin32k", "wifibt_32kin"; |
| 195 |
interrupt-parent = <&gpio0>; |
| 196 |
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; |
| 197 |
pinctrl-names = "default"; |
| 198 |
pinctrl-0 = <&pmic_int_l>; |
| 199 |
rockchip,system-power-controller; |
| 200 |
wakeup-source; |
| 201 |
#clock-cells = <1>; |
| 202 |
|
| 203 |
vcc1-supply = <&vcc33_sys>; |
| 204 |
vcc2-supply = <&vcc33_sys>; |
| 205 |
vcc3-supply = <&vcc33_sys>; |
| 206 |
vcc4-supply = <&vcc33_sys>; |
| 207 |
vcc6-supply = <&vcc_5v>; |
| 208 |
vcc7-supply = <&vcc33_sys>; |
| 209 |
vcc8-supply = <&vcc33_sys>; |
| 210 |
vcc12-supply = <&vcc_18>; |
| 211 |
vddio-supply = <&vcc33_io>; |
| 212 |
|
| 213 |
regulators { |
| 214 |
vdd_cpu: DCDC_REG1 { |
| 215 |
regulator-name = "vdd_arm"; |
| 216 |
regulator-always-on; |
| 217 |
regulator-boot-on; |
| 218 |
regulator-min-microvolt = <750000>; |
| 219 |
regulator-max-microvolt = <1450000>; |
| 220 |
regulator-ramp-delay = <6001>; |
| 221 |
regulator-state-mem { |
| 222 |
regulator-off-in-suspend; |
| 223 |
}; |
| 224 |
}; |
| 225 |
|
| 226 |
vdd_gpu: DCDC_REG2 { |
| 227 |
regulator-name = "vdd_gpu"; |
| 228 |
regulator-always-on; |
| 229 |
regulator-boot-on; |
| 230 |
regulator-min-microvolt = <800000>; |
| 231 |
regulator-max-microvolt = <1250000>; |
| 232 |
regulator-ramp-delay = <6001>; |
| 233 |
regulator-state-mem { |
| 234 |
regulator-off-in-suspend; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
vcc135_ddr: DCDC_REG3 { |
| 239 |
regulator-name = "vcc135_ddr"; |
| 240 |
regulator-always-on; |
| 241 |
regulator-boot-on; |
| 242 |
regulator-state-mem { |
| 243 |
regulator-on-in-suspend; |
| 244 |
}; |
| 245 |
}; |
| 246 |
|
| 247 |
/* |
| 248 |
* vcc_18 has several aliases. (vcc18_flashio and |
| 249 |
* vcc18_wl). We'll add those aliases here just to |
| 250 |
* make it easier to follow the schematic. The signals |
| 251 |
* are actually hooked together and only separated for |
| 252 |
* power measurement purposes). |
| 253 |
*/ |
| 254 |
vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 { |
| 255 |
regulator-name = "vcc_18"; |
| 256 |
regulator-always-on; |
| 257 |
regulator-boot-on; |
| 258 |
regulator-min-microvolt = <1800000>; |
| 259 |
regulator-max-microvolt = <1800000>; |
| 260 |
regulator-state-mem { |
| 261 |
regulator-on-in-suspend; |
| 262 |
regulator-suspend-microvolt = <1800000>; |
| 263 |
}; |
| 264 |
}; |
| 265 |
|
| 266 |
/* |
| 267 |
* Note that both vcc33_io and vcc33_pmuio are always |
| 268 |
* powered together. To simplify the logic in the dts |
| 269 |
* we just refer to vcc33_io every time something is |
| 270 |
* powered from vcc33_pmuio. In fact, on later boards |
| 271 |
* (such as danger) they're the same net. |
| 272 |
*/ |
| 273 |
vcc33_io: LDO_REG1 { |
| 274 |
regulator-name = "vcc33_io"; |
| 275 |
regulator-always-on; |
| 276 |
regulator-boot-on; |
| 277 |
regulator-min-microvolt = <3300000>; |
| 278 |
regulator-max-microvolt = <3300000>; |
| 279 |
regulator-state-mem { |
| 280 |
regulator-on-in-suspend; |
| 281 |
regulator-suspend-microvolt = <3300000>; |
| 282 |
}; |
| 283 |
}; |
| 284 |
|
| 285 |
vdd_10: LDO_REG3 { |
| 286 |
regulator-name = "vdd_10"; |
| 287 |
regulator-always-on; |
| 288 |
regulator-boot-on; |
| 289 |
regulator-min-microvolt = <1000000>; |
| 290 |
regulator-max-microvolt = <1000000>; |
| 291 |
regulator-state-mem { |
| 292 |
regulator-on-in-suspend; |
| 293 |
regulator-suspend-microvolt = <1000000>; |
| 294 |
}; |
| 295 |
}; |
| 296 |
|
| 297 |
vdd10_lcd_pwren_h: LDO_REG7 { |
| 298 |
regulator-name = "vdd10_lcd_pwren_h"; |
| 299 |
regulator-always-on; |
| 300 |
regulator-boot-on; |
| 301 |
regulator-min-microvolt = <2500000>; |
| 302 |
regulator-max-microvolt = <2500000>; |
| 303 |
regulator-state-mem { |
| 304 |
regulator-off-in-suspend; |
| 305 |
}; |
| 306 |
}; |
| 307 |
|
| 308 |
vcc33_lcd: SWITCH_REG1 { |
| 309 |
regulator-name = "vcc33_lcd"; |
| 310 |
regulator-always-on; |
| 311 |
regulator-boot-on; |
| 312 |
regulator-state-mem { |
| 313 |
regulator-off-in-suspend; |
| 314 |
}; |
| 315 |
}; |
| 316 |
}; |
| 317 |
}; |
| 318 |
}; |
| 319 |
|
| 320 |
&i2c1 { |
| 321 |
status = "okay"; |
| 322 |
|
| 323 |
clock-frequency = <400000>; |
| 324 |
i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */ |
| 325 |
i2c-scl-rising-time-ns = <100>; /* 40ns measured */ |
| 326 |
|
| 327 |
tpm: tpm@20 { |
| 328 |
compatible = "infineon,slb9645tt"; |
| 329 |
reg = <0x20>; |
| 330 |
powered-while-suspended; |
| 331 |
}; |
| 332 |
}; |
| 333 |
|
| 334 |
&i2c2 { |
| 335 |
status = "okay"; |
| 336 |
|
| 337 |
/* 100kHz since 4.7k resistors don't rise fast enough */ |
| 338 |
clock-frequency = <100000>; |
| 339 |
i2c-scl-falling-time-ns = <50>; /* 10ns measured */ |
| 340 |
i2c-scl-rising-time-ns = <800>; /* 600ns measured */ |
| 341 |
}; |
| 342 |
|
| 343 |
&i2c4 { |
| 344 |
status = "okay"; |
| 345 |
|
| 346 |
clock-frequency = <400000>; |
| 347 |
i2c-scl-falling-time-ns = <50>; /* 11ns measured */ |
| 348 |
i2c-scl-rising-time-ns = <300>; /* 225ns measured */ |
| 349 |
}; |
| 350 |
|
| 351 |
&io_domains { |
| 352 |
status = "okay"; |
| 353 |
|
| 354 |
bb-supply = <&vcc33_io>; |
| 355 |
dvp-supply = <&vcc_18>; |
| 356 |
flash0-supply = <&vcc18_flashio>; |
| 357 |
gpio1830-supply = <&vcc33_io>; |
| 358 |
gpio30-supply = <&vcc33_io>; |
| 359 |
lcdc-supply = <&vcc33_lcd>; |
| 360 |
wifi-supply = <&vcc18_wl>; |
| 361 |
}; |
| 362 |
|
| 363 |
&pwm1 { |
| 364 |
status = "okay"; |
| 365 |
}; |
| 366 |
|
| 367 |
&sdio0 { |
| 368 |
status = "okay"; |
| 369 |
|
| 370 |
bus-width = <4>; |
| 371 |
cap-sd-highspeed; |
| 372 |
cap-sdio-irq; |
| 373 |
keep-power-in-suspend; |
| 374 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 375 |
non-removable; |
| 376 |
pinctrl-names = "default"; |
| 377 |
pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>; |
| 378 |
sd-uhs-sdr12; |
| 379 |
sd-uhs-sdr25; |
| 380 |
sd-uhs-sdr50; |
| 381 |
sd-uhs-sdr104; |
| 382 |
vmmc-supply = <&vcc33_sys>; |
| 383 |
vqmmc-supply = <&vcc18_wl>; |
| 384 |
}; |
| 385 |
|
| 386 |
&spi2 { |
| 387 |
status = "okay"; |
| 388 |
|
| 389 |
rx-sample-delay-ns = <12>; |
| 390 |
|
| 391 |
spi_flash: flash@0 { |
| 392 |
compatible = "jedec,spi-nor"; |
| 393 |
spi-max-frequency = <50000000>; |
| 394 |
reg = <0>; |
| 395 |
}; |
| 396 |
}; |
| 397 |
|
| 398 |
&tsadc { |
| 399 |
status = "okay"; |
| 400 |
|
| 401 |
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ |
| 402 |
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ |
| 403 |
rockchip,hw-tshut-temp = <125000>; |
| 404 |
}; |
| 405 |
|
| 406 |
&uart0 { |
| 407 |
status = "okay"; |
| 408 |
|
| 409 |
/* Pins don't include flow control by default; add that in */ |
| 410 |
pinctrl-names = "default"; |
| 411 |
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; |
| 412 |
}; |
| 413 |
|
| 414 |
&uart1 { |
| 415 |
status = "okay"; |
| 416 |
}; |
| 417 |
|
| 418 |
&uart2 { |
| 419 |
status = "okay"; |
| 420 |
}; |
| 421 |
|
| 422 |
&usbphy { |
| 423 |
status = "okay"; |
| 424 |
}; |
| 425 |
|
| 426 |
&usb_host0_ehci { |
| 427 |
status = "okay"; |
| 428 |
|
| 429 |
needs-reset-on-resume; |
| 430 |
}; |
| 431 |
|
| 432 |
&usb_host1 { |
| 433 |
status = "okay"; |
| 434 |
snps,need-phy-for-wake; |
| 435 |
}; |
| 436 |
|
| 437 |
&usb_otg { |
| 438 |
status = "okay"; |
| 439 |
|
| 440 |
assigned-clocks = <&cru SCLK_USBPHY480M_SRC>; |
| 441 |
assigned-clock-parents = <&usbphy0>; |
| 442 |
dr_mode = "host"; |
| 443 |
snps,need-phy-for-wake; |
| 444 |
}; |
| 445 |
|
| 446 |
&vopb { |
| 447 |
status = "okay"; |
| 448 |
}; |
| 449 |
|
| 450 |
&vopb_mmu { |
| 451 |
status = "okay"; |
| 452 |
}; |
| 453 |
|
| 454 |
&wdt { |
| 455 |
status = "okay"; |
| 456 |
}; |
| 457 |
|
| 458 |
&pinctrl { |
| 459 |
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { |
| 460 |
bias-disable; |
| 461 |
drive-strength = <8>; |
| 462 |
}; |
| 463 |
|
| 464 |
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { |
| 465 |
bias-pull-up; |
| 466 |
drive-strength = <8>; |
| 467 |
}; |
| 468 |
|
| 469 |
pcfg_output_high: pcfg-output-high { |
| 470 |
output-high; |
| 471 |
}; |
| 472 |
|
| 473 |
pcfg_output_low: pcfg-output-low { |
| 474 |
output-low; |
| 475 |
}; |
| 476 |
|
| 477 |
buttons { |
| 478 |
pwr_key_l: pwr-key-l { |
| 479 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 480 |
}; |
| 481 |
}; |
| 482 |
|
| 483 |
emmc { |
| 484 |
emmc_reset: emmc-reset { |
| 485 |
rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 486 |
}; |
| 487 |
|
| 488 |
/* |
| 489 |
* We run eMMC at max speed; bump up drive strength. |
| 490 |
* We also have external pulls, so disable the internal ones. |
| 491 |
*/ |
| 492 |
emmc_clk: emmc-clk { |
| 493 |
rockchip,pins = <3 RK_PC2 2 &pcfg_pull_none_drv_8ma>; |
| 494 |
}; |
| 495 |
|
| 496 |
emmc_cmd: emmc-cmd { |
| 497 |
rockchip,pins = <3 RK_PC0 2 &pcfg_pull_none_drv_8ma>; |
| 498 |
}; |
| 499 |
|
| 500 |
emmc_bus8: emmc-bus8 { |
| 501 |
rockchip,pins = <3 RK_PA0 2 &pcfg_pull_none_drv_8ma>, |
| 502 |
<3 RK_PA1 2 &pcfg_pull_none_drv_8ma>, |
| 503 |
<3 RK_PA2 2 &pcfg_pull_none_drv_8ma>, |
| 504 |
<3 RK_PA3 2 &pcfg_pull_none_drv_8ma>, |
| 505 |
<3 RK_PA4 2 &pcfg_pull_none_drv_8ma>, |
| 506 |
<3 RK_PA5 2 &pcfg_pull_none_drv_8ma>, |
| 507 |
<3 RK_PA6 2 &pcfg_pull_none_drv_8ma>, |
| 508 |
<3 RK_PA7 2 &pcfg_pull_none_drv_8ma>; |
| 509 |
}; |
| 510 |
}; |
| 511 |
|
| 512 |
pmic { |
| 513 |
pmic_int_l: pmic-int-l { |
| 514 |
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; |
| 515 |
}; |
| 516 |
}; |
| 517 |
|
| 518 |
reboot { |
| 519 |
ap_warm_reset_h: ap-warm-reset-h { |
| 520 |
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 521 |
}; |
| 522 |
}; |
| 523 |
|
| 524 |
recovery-switch { |
| 525 |
rec_mode_l: rec-mode-l { |
| 526 |
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; |
| 527 |
}; |
| 528 |
}; |
| 529 |
|
| 530 |
sdio0 { |
| 531 |
wifi_enable_h: wifienable-h { |
| 532 |
rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 533 |
}; |
| 534 |
|
| 535 |
/* NOTE: mislabelled on schematic; should be bt_enable_h */ |
| 536 |
bt_enable_l: bt-enable-l { |
| 537 |
rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 538 |
}; |
| 539 |
|
| 540 |
bt_host_wake: bt-host-wake { |
| 541 |
rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>; |
| 542 |
}; |
| 543 |
|
| 544 |
bt_host_wake_l: bt-host-wake-l { |
| 545 |
rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 546 |
}; |
| 547 |
|
| 548 |
/* |
| 549 |
* We run sdio0 at max speed; bump up drive strength. |
| 550 |
* We also have external pulls, so disable the internal ones. |
| 551 |
*/ |
| 552 |
sdio0_bus4: sdio0-bus4 { |
| 553 |
rockchip,pins = <4 RK_PC4 1 &pcfg_pull_none_drv_8ma>, |
| 554 |
<4 RK_PC5 1 &pcfg_pull_none_drv_8ma>, |
| 555 |
<4 RK_PC6 1 &pcfg_pull_none_drv_8ma>, |
| 556 |
<4 RK_PC7 1 &pcfg_pull_none_drv_8ma>; |
| 557 |
}; |
| 558 |
|
| 559 |
sdio0_cmd: sdio0-cmd { |
| 560 |
rockchip,pins = <4 RK_PD0 1 &pcfg_pull_none_drv_8ma>; |
| 561 |
}; |
| 562 |
|
| 563 |
sdio0_clk: sdio0-clk { |
| 564 |
rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>; |
| 565 |
}; |
| 566 |
|
| 567 |
/* |
| 568 |
* These pins are only present on very new veyron boards; on |
| 569 |
* older boards bt_dev_wake is simply always high. Note that |
| 570 |
* gpio4_D2 is a NC on old veyron boards, so it doesn't hurt |
| 571 |
* to map this pin everywhere |
| 572 |
*/ |
| 573 |
bt_dev_wake_sleep: bt-dev-wake-sleep { |
| 574 |
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_low>; |
| 575 |
}; |
| 576 |
|
| 577 |
bt_dev_wake_awake: bt-dev-wake-awake { |
| 578 |
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>; |
| 579 |
}; |
| 580 |
|
| 581 |
bt_dev_wake: bt-dev-wake { |
| 582 |
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 583 |
}; |
| 584 |
}; |
| 585 |
|
| 586 |
tpm { |
| 587 |
tpm_int_h: tpm-int-h { |
| 588 |
rockchip,pins = <7 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 589 |
}; |
| 590 |
}; |
| 591 |
|
| 592 |
write-protect { |
| 593 |
fw_wp_ap: fw-wp-ap { |
| 594 |
rockchip,pins = <7 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 595 |
}; |
| 596 |
}; |
| 597 |
}; |