| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2013 MundoReader S.L. |
| 4 |
* Author: Heiko Stuebner <[email protected]> |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 8 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 9 |
#include <dt-bindings/soc/rockchip,boot-mode.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
#address-cells = <1>; |
| 13 |
#size-cells = <1>; |
| 14 |
|
| 15 |
interrupt-parent = <&gic>; |
| 16 |
|
| 17 |
aliases { |
| 18 |
ethernet0 = &emac; |
| 19 |
gpio0 = &gpio0; |
| 20 |
gpio1 = &gpio1; |
| 21 |
gpio2 = &gpio2; |
| 22 |
gpio3 = &gpio3; |
| 23 |
i2c0 = &i2c0; |
| 24 |
i2c1 = &i2c1; |
| 25 |
i2c2 = &i2c2; |
| 26 |
i2c3 = &i2c3; |
| 27 |
i2c4 = &i2c4; |
| 28 |
serial0 = &uart0; |
| 29 |
serial1 = &uart1; |
| 30 |
serial2 = &uart2; |
| 31 |
serial3 = &uart3; |
| 32 |
spi0 = &spi0; |
| 33 |
spi1 = &spi1; |
| 34 |
}; |
| 35 |
|
| 36 |
xin24m: oscillator { |
| 37 |
compatible = "fixed-clock"; |
| 38 |
clock-frequency = <24000000>; |
| 39 |
#clock-cells = <0>; |
| 40 |
clock-output-names = "xin24m"; |
| 41 |
}; |
| 42 |
|
| 43 |
gpu: gpu@10090000 { |
| 44 |
compatible = "arm,mali-400"; |
| 45 |
reg = <0x10090000 0x10000>; |
| 46 |
clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>; |
| 47 |
clock-names = "bus", "core"; |
| 48 |
assigned-clocks = <&cru ACLK_GPU>; |
| 49 |
assigned-clock-rates = <100000000>; |
| 50 |
resets = <&cru SRST_GPU>; |
| 51 |
status = "disabled"; |
| 52 |
}; |
| 53 |
|
| 54 |
vpu: video-codec@10104000 { |
| 55 |
compatible = "rockchip,rk3066-vpu"; |
| 56 |
reg = <0x10104000 0x800>; |
| 57 |
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, |
| 58 |
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| 59 |
interrupt-names = "vepu", "vdpu"; |
| 60 |
clocks = <&cru ACLK_VDPU>, <&cru HCLK_VDPU>, |
| 61 |
<&cru ACLK_VEPU>, <&cru HCLK_VEPU>; |
| 62 |
clock-names = "aclk_vdpu", "hclk_vdpu", |
| 63 |
"aclk_vepu", "hclk_vepu"; |
| 64 |
}; |
| 65 |
|
| 66 |
L2: cache-controller@10138000 { |
| 67 |
compatible = "arm,pl310-cache"; |
| 68 |
reg = <0x10138000 0x1000>; |
| 69 |
cache-unified; |
| 70 |
cache-level = <2>; |
| 71 |
}; |
| 72 |
|
| 73 |
scu@1013c000 { |
| 74 |
compatible = "arm,cortex-a9-scu"; |
| 75 |
reg = <0x1013c000 0x100>; |
| 76 |
}; |
| 77 |
|
| 78 |
global_timer: global-timer@1013c200 { |
| 79 |
compatible = "arm,cortex-a9-global-timer"; |
| 80 |
reg = <0x1013c200 0x20>; |
| 81 |
interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; |
| 82 |
clocks = <&cru CORE_PERI>; |
| 83 |
status = "disabled"; |
| 84 |
/* The clock source and the sched_clock provided by the arm_global_timer |
| 85 |
* on Rockchip rk3066a/rk3188 are quite unstable because their rates |
| 86 |
* depend on the CPU frequency. |
| 87 |
* Keep the arm_global_timer disabled in order to have the |
| 88 |
* DW_APB_TIMER (rk3066a) or ROCKCHIP_TIMER (rk3188) selected by default. |
| 89 |
*/ |
| 90 |
}; |
| 91 |
|
| 92 |
local_timer: local-timer@1013c600 { |
| 93 |
compatible = "arm,cortex-a9-twd-timer"; |
| 94 |
reg = <0x1013c600 0x20>; |
| 95 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>; |
| 96 |
clocks = <&cru CORE_PERI>; |
| 97 |
}; |
| 98 |
|
| 99 |
gic: interrupt-controller@1013d000 { |
| 100 |
compatible = "arm,cortex-a9-gic"; |
| 101 |
interrupt-controller; |
| 102 |
#interrupt-cells = <3>; |
| 103 |
reg = <0x1013d000 0x1000>, |
| 104 |
<0x1013c100 0x0100>; |
| 105 |
}; |
| 106 |
|
| 107 |
uart0: serial@10124000 { |
| 108 |
compatible = "snps,dw-apb-uart"; |
| 109 |
reg = <0x10124000 0x400>; |
| 110 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 111 |
reg-shift = <2>; |
| 112 |
reg-io-width = <1>; |
| 113 |
clock-names = "baudclk", "apb_pclk"; |
| 114 |
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; |
| 115 |
status = "disabled"; |
| 116 |
}; |
| 117 |
|
| 118 |
uart1: serial@10126000 { |
| 119 |
compatible = "snps,dw-apb-uart"; |
| 120 |
reg = <0x10126000 0x400>; |
| 121 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 122 |
reg-shift = <2>; |
| 123 |
reg-io-width = <1>; |
| 124 |
clock-names = "baudclk", "apb_pclk"; |
| 125 |
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; |
| 126 |
status = "disabled"; |
| 127 |
}; |
| 128 |
|
| 129 |
qos_gpu: qos@1012d000 { |
| 130 |
compatible = "rockchip,rk3066-qos", "syscon"; |
| 131 |
reg = <0x1012d000 0x20>; |
| 132 |
}; |
| 133 |
|
| 134 |
qos_vpu: qos@1012e000 { |
| 135 |
compatible = "rockchip,rk3066-qos", "syscon"; |
| 136 |
reg = <0x1012e000 0x20>; |
| 137 |
}; |
| 138 |
|
| 139 |
qos_lcdc0: qos@1012f000 { |
| 140 |
compatible = "rockchip,rk3066-qos", "syscon"; |
| 141 |
reg = <0x1012f000 0x20>; |
| 142 |
}; |
| 143 |
|
| 144 |
qos_cif0: qos@1012f080 { |
| 145 |
compatible = "rockchip,rk3066-qos", "syscon"; |
| 146 |
reg = <0x1012f080 0x20>; |
| 147 |
}; |
| 148 |
|
| 149 |
qos_ipp: qos@1012f100 { |
| 150 |
compatible = "rockchip,rk3066-qos", "syscon"; |
| 151 |
reg = <0x1012f100 0x20>; |
| 152 |
}; |
| 153 |
|
| 154 |
qos_lcdc1: qos@1012f180 { |
| 155 |
compatible = "rockchip,rk3066-qos", "syscon"; |
| 156 |
reg = <0x1012f180 0x20>; |
| 157 |
}; |
| 158 |
|
| 159 |
qos_cif1: qos@1012f200 { |
| 160 |
compatible = "rockchip,rk3066-qos", "syscon"; |
| 161 |
reg = <0x1012f200 0x20>; |
| 162 |
}; |
| 163 |
|
| 164 |
qos_rga: qos@1012f280 { |
| 165 |
compatible = "rockchip,rk3066-qos", "syscon"; |
| 166 |
reg = <0x1012f280 0x20>; |
| 167 |
}; |
| 168 |
|
| 169 |
usb_otg: usb@10180000 { |
| 170 |
compatible = "rockchip,rk3066-usb", "snps,dwc2"; |
| 171 |
reg = <0x10180000 0x40000>; |
| 172 |
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| 173 |
clocks = <&cru HCLK_OTG0>; |
| 174 |
clock-names = "otg"; |
| 175 |
dr_mode = "otg"; |
| 176 |
g-np-tx-fifo-size = <16>; |
| 177 |
g-rx-fifo-size = <275>; |
| 178 |
g-tx-fifo-size = <256 128 128 64 64 32>; |
| 179 |
phys = <&usbphy0>; |
| 180 |
phy-names = "usb2-phy"; |
| 181 |
status = "disabled"; |
| 182 |
}; |
| 183 |
|
| 184 |
usb_host: usb@101c0000 { |
| 185 |
compatible = "snps,dwc2"; |
| 186 |
reg = <0x101c0000 0x40000>; |
| 187 |
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; |
| 188 |
clocks = <&cru HCLK_OTG1>; |
| 189 |
clock-names = "otg"; |
| 190 |
dr_mode = "host"; |
| 191 |
phys = <&usbphy1>; |
| 192 |
phy-names = "usb2-phy"; |
| 193 |
status = "disabled"; |
| 194 |
}; |
| 195 |
|
| 196 |
emac: ethernet@10204000 { |
| 197 |
compatible = "rockchip,rk3066-emac"; |
| 198 |
reg = <0x10204000 0x3c>; |
| 199 |
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| 200 |
clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>; |
| 201 |
clock-names = "hclk", "macref"; |
| 202 |
max-speed = <100>; |
| 203 |
phy-mode = "rmii"; |
| 204 |
rockchip,grf = <&grf>; |
| 205 |
status = "disabled"; |
| 206 |
}; |
| 207 |
|
| 208 |
mmc0: mmc@10214000 { |
| 209 |
compatible = "rockchip,rk2928-dw-mshc"; |
| 210 |
reg = <0x10214000 0x1000>; |
| 211 |
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; |
| 212 |
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; |
| 213 |
clock-names = "biu", "ciu"; |
| 214 |
dmas = <&dmac2 1>; |
| 215 |
dma-names = "rx-tx"; |
| 216 |
fifo-depth = <256>; |
| 217 |
resets = <&cru SRST_SDMMC>; |
| 218 |
reset-names = "reset"; |
| 219 |
status = "disabled"; |
| 220 |
}; |
| 221 |
|
| 222 |
mmc1: mmc@10218000 { |
| 223 |
compatible = "rockchip,rk2928-dw-mshc"; |
| 224 |
reg = <0x10218000 0x1000>; |
| 225 |
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; |
| 226 |
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>; |
| 227 |
clock-names = "biu", "ciu"; |
| 228 |
dmas = <&dmac2 3>; |
| 229 |
dma-names = "rx-tx"; |
| 230 |
fifo-depth = <256>; |
| 231 |
resets = <&cru SRST_SDIO>; |
| 232 |
reset-names = "reset"; |
| 233 |
status = "disabled"; |
| 234 |
}; |
| 235 |
|
| 236 |
emmc: mmc@1021c000 { |
| 237 |
compatible = "rockchip,rk2928-dw-mshc"; |
| 238 |
reg = <0x1021c000 0x1000>; |
| 239 |
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; |
| 240 |
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>; |
| 241 |
clock-names = "biu", "ciu"; |
| 242 |
dmas = <&dmac2 4>; |
| 243 |
dma-names = "rx-tx"; |
| 244 |
fifo-depth = <256>; |
| 245 |
resets = <&cru SRST_EMMC>; |
| 246 |
reset-names = "reset"; |
| 247 |
status = "disabled"; |
| 248 |
}; |
| 249 |
|
| 250 |
nfc: nand-controller@10500000 { |
| 251 |
compatible = "rockchip,rk2928-nfc"; |
| 252 |
reg = <0x10500000 0x4000>; |
| 253 |
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; |
| 254 |
clocks = <&cru HCLK_NANDC0>; |
| 255 |
clock-names = "ahb"; |
| 256 |
status = "disabled"; |
| 257 |
}; |
| 258 |
|
| 259 |
pmu: pmu@20004000 { |
| 260 |
compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd"; |
| 261 |
reg = <0x20004000 0x100>; |
| 262 |
|
| 263 |
reboot-mode { |
| 264 |
compatible = "syscon-reboot-mode"; |
| 265 |
offset = <0x40>; |
| 266 |
mode-normal = <BOOT_NORMAL>; |
| 267 |
mode-recovery = <BOOT_RECOVERY>; |
| 268 |
mode-bootloader = <BOOT_FASTBOOT>; |
| 269 |
mode-loader = <BOOT_BL_DOWNLOAD>; |
| 270 |
}; |
| 271 |
}; |
| 272 |
|
| 273 |
grf: grf@20008000 { |
| 274 |
compatible = "syscon", "simple-mfd"; |
| 275 |
reg = <0x20008000 0x200>; |
| 276 |
}; |
| 277 |
|
| 278 |
dmac1_s: dma-controller@20018000 { |
| 279 |
compatible = "arm,pl330", "arm,primecell"; |
| 280 |
reg = <0x20018000 0x4000>; |
| 281 |
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| 282 |
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 283 |
#dma-cells = <1>; |
| 284 |
arm,pl330-broken-no-flushp; |
| 285 |
arm,pl330-periph-burst; |
| 286 |
clocks = <&cru ACLK_DMA1>; |
| 287 |
clock-names = "apb_pclk"; |
| 288 |
}; |
| 289 |
|
| 290 |
dmac1_ns: dma-controller@2001c000 { |
| 291 |
compatible = "arm,pl330", "arm,primecell"; |
| 292 |
reg = <0x2001c000 0x4000>; |
| 293 |
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, |
| 294 |
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; |
| 295 |
#dma-cells = <1>; |
| 296 |
arm,pl330-broken-no-flushp; |
| 297 |
arm,pl330-periph-burst; |
| 298 |
clocks = <&cru ACLK_DMA1>; |
| 299 |
clock-names = "apb_pclk"; |
| 300 |
status = "disabled"; |
| 301 |
}; |
| 302 |
|
| 303 |
i2c0: i2c@2002d000 { |
| 304 |
compatible = "rockchip,rk3066-i2c"; |
| 305 |
reg = <0x2002d000 0x1000>; |
| 306 |
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| 307 |
#address-cells = <1>; |
| 308 |
#size-cells = <0>; |
| 309 |
|
| 310 |
rockchip,grf = <&grf>; |
| 311 |
|
| 312 |
clock-names = "i2c"; |
| 313 |
clocks = <&cru PCLK_I2C0>; |
| 314 |
|
| 315 |
status = "disabled"; |
| 316 |
}; |
| 317 |
|
| 318 |
i2c1: i2c@2002f000 { |
| 319 |
compatible = "rockchip,rk3066-i2c"; |
| 320 |
reg = <0x2002f000 0x1000>; |
| 321 |
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| 322 |
#address-cells = <1>; |
| 323 |
#size-cells = <0>; |
| 324 |
|
| 325 |
rockchip,grf = <&grf>; |
| 326 |
|
| 327 |
clocks = <&cru PCLK_I2C1>; |
| 328 |
clock-names = "i2c"; |
| 329 |
|
| 330 |
status = "disabled"; |
| 331 |
}; |
| 332 |
|
| 333 |
pwm0: pwm@20030000 { |
| 334 |
compatible = "rockchip,rk2928-pwm"; |
| 335 |
reg = <0x20030000 0x10>; |
| 336 |
#pwm-cells = <2>; |
| 337 |
clocks = <&cru PCLK_PWM01>; |
| 338 |
status = "disabled"; |
| 339 |
}; |
| 340 |
|
| 341 |
pwm1: pwm@20030010 { |
| 342 |
compatible = "rockchip,rk2928-pwm"; |
| 343 |
reg = <0x20030010 0x10>; |
| 344 |
#pwm-cells = <2>; |
| 345 |
clocks = <&cru PCLK_PWM01>; |
| 346 |
status = "disabled"; |
| 347 |
}; |
| 348 |
|
| 349 |
wdt: watchdog@2004c000 { |
| 350 |
compatible = "snps,dw-wdt"; |
| 351 |
reg = <0x2004c000 0x100>; |
| 352 |
clocks = <&cru PCLK_WDT>; |
| 353 |
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| 354 |
status = "disabled"; |
| 355 |
}; |
| 356 |
|
| 357 |
pwm2: pwm@20050020 { |
| 358 |
compatible = "rockchip,rk2928-pwm"; |
| 359 |
reg = <0x20050020 0x10>; |
| 360 |
#pwm-cells = <2>; |
| 361 |
clocks = <&cru PCLK_PWM23>; |
| 362 |
status = "disabled"; |
| 363 |
}; |
| 364 |
|
| 365 |
pwm3: pwm@20050030 { |
| 366 |
compatible = "rockchip,rk2928-pwm"; |
| 367 |
reg = <0x20050030 0x10>; |
| 368 |
#pwm-cells = <2>; |
| 369 |
clocks = <&cru PCLK_PWM23>; |
| 370 |
status = "disabled"; |
| 371 |
}; |
| 372 |
|
| 373 |
i2c2: i2c@20056000 { |
| 374 |
compatible = "rockchip,rk3066-i2c"; |
| 375 |
reg = <0x20056000 0x1000>; |
| 376 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 377 |
#address-cells = <1>; |
| 378 |
#size-cells = <0>; |
| 379 |
|
| 380 |
rockchip,grf = <&grf>; |
| 381 |
|
| 382 |
clocks = <&cru PCLK_I2C2>; |
| 383 |
clock-names = "i2c"; |
| 384 |
|
| 385 |
status = "disabled"; |
| 386 |
}; |
| 387 |
|
| 388 |
i2c3: i2c@2005a000 { |
| 389 |
compatible = "rockchip,rk3066-i2c"; |
| 390 |
reg = <0x2005a000 0x1000>; |
| 391 |
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; |
| 392 |
#address-cells = <1>; |
| 393 |
#size-cells = <0>; |
| 394 |
|
| 395 |
rockchip,grf = <&grf>; |
| 396 |
|
| 397 |
clocks = <&cru PCLK_I2C3>; |
| 398 |
clock-names = "i2c"; |
| 399 |
|
| 400 |
status = "disabled"; |
| 401 |
}; |
| 402 |
|
| 403 |
i2c4: i2c@2005e000 { |
| 404 |
compatible = "rockchip,rk3066-i2c"; |
| 405 |
reg = <0x2005e000 0x1000>; |
| 406 |
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; |
| 407 |
#address-cells = <1>; |
| 408 |
#size-cells = <0>; |
| 409 |
|
| 410 |
rockchip,grf = <&grf>; |
| 411 |
|
| 412 |
clocks = <&cru PCLK_I2C4>; |
| 413 |
clock-names = "i2c"; |
| 414 |
|
| 415 |
status = "disabled"; |
| 416 |
}; |
| 417 |
|
| 418 |
uart2: serial@20064000 { |
| 419 |
compatible = "snps,dw-apb-uart"; |
| 420 |
reg = <0x20064000 0x400>; |
| 421 |
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; |
| 422 |
reg-shift = <2>; |
| 423 |
reg-io-width = <1>; |
| 424 |
clock-names = "baudclk", "apb_pclk"; |
| 425 |
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; |
| 426 |
status = "disabled"; |
| 427 |
}; |
| 428 |
|
| 429 |
uart3: serial@20068000 { |
| 430 |
compatible = "snps,dw-apb-uart"; |
| 431 |
reg = <0x20068000 0x400>; |
| 432 |
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; |
| 433 |
reg-shift = <2>; |
| 434 |
reg-io-width = <1>; |
| 435 |
clock-names = "baudclk", "apb_pclk"; |
| 436 |
clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; |
| 437 |
status = "disabled"; |
| 438 |
}; |
| 439 |
|
| 440 |
saradc: saradc@2006c000 { |
| 441 |
compatible = "rockchip,saradc"; |
| 442 |
reg = <0x2006c000 0x100>; |
| 443 |
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; |
| 444 |
#io-channel-cells = <1>; |
| 445 |
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; |
| 446 |
clock-names = "saradc", "apb_pclk"; |
| 447 |
resets = <&cru SRST_SARADC>; |
| 448 |
reset-names = "saradc-apb"; |
| 449 |
status = "disabled"; |
| 450 |
}; |
| 451 |
|
| 452 |
spi0: spi@20070000 { |
| 453 |
compatible = "rockchip,rk3066-spi"; |
| 454 |
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; |
| 455 |
clock-names = "spiclk", "apb_pclk"; |
| 456 |
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| 457 |
reg = <0x20070000 0x1000>; |
| 458 |
#address-cells = <1>; |
| 459 |
#size-cells = <0>; |
| 460 |
dmas = <&dmac2 10>, <&dmac2 11>; |
| 461 |
dma-names = "tx", "rx"; |
| 462 |
status = "disabled"; |
| 463 |
}; |
| 464 |
|
| 465 |
spi1: spi@20074000 { |
| 466 |
compatible = "rockchip,rk3066-spi"; |
| 467 |
clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; |
| 468 |
clock-names = "spiclk", "apb_pclk"; |
| 469 |
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| 470 |
reg = <0x20074000 0x1000>; |
| 471 |
#address-cells = <1>; |
| 472 |
#size-cells = <0>; |
| 473 |
dmas = <&dmac2 12>, <&dmac2 13>; |
| 474 |
dma-names = "tx", "rx"; |
| 475 |
status = "disabled"; |
| 476 |
}; |
| 477 |
|
| 478 |
dmac2: dma-controller@20078000 { |
| 479 |
compatible = "arm,pl330", "arm,primecell"; |
| 480 |
reg = <0x20078000 0x4000>; |
| 481 |
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, |
| 482 |
<GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| 483 |
#dma-cells = <1>; |
| 484 |
arm,pl330-broken-no-flushp; |
| 485 |
arm,pl330-periph-burst; |
| 486 |
clocks = <&cru ACLK_DMA2>; |
| 487 |
clock-names = "apb_pclk"; |
| 488 |
}; |
| 489 |
}; |