Debian Codegraph @

arch/arm/boot/dts/rockchip/rk3066a-bqcurie2.dts

raw
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3 * Copyright (c) 2013 MundoReader S.L.
4 * Author: Heiko Stuebner <[email protected]>
5 */
6
7 /dts-v1/;
8 #include <dt-bindings/input/input.h>
9 #include "rk3066a.dtsi"
10
11 / {
12 model = "bq Curie 2";
13 compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
14
15 aliases {
16 mmc0 = &mmc0;
17 mmc1 = &mmc1;
18 };
19
20 memory@60000000 {
21 device_type = "memory";
22 reg = <0x60000000 0x40000000>;
23 };
24
25 vdd_log: regulator-vdd-log {
26 compatible = "pwm-regulator";
27 pwms = <&pwm3 0 1000>;
28 regulator-name = "vdd_log";
29 regulator-min-microvolt = <1200000>;
30 regulator-max-microvolt = <1200000>;
31 regulator-always-on;
32 voltage-table = <1000000 100>,
33 <1200000 42>;
34 status = "okay";
35 };
36
37 vcc_sd0: regulator-fixed {
38 compatible = "regulator-fixed";
39 regulator-name = "sdmmc-supply";
40 regulator-min-microvolt = <3000000>;
41 regulator-max-microvolt = <3000000>;
42 gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
43 startup-delay-us = <100000>;
44 vin-supply = <&vcc_io>;
45 };
46
47 gpio-keys {
48 compatible = "gpio-keys";
49 autorepeat;
50
51 key-power {
52 gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
53 linux,code = <KEY_POWER>;
54 label = "GPIO Key Power";
55 linux,input-type = <1>;
56 wakeup-source;
57 debounce-interval = <100>;
58 };
59 key-volume-down {
60 gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
61 linux,code = <KEY_VOLUMEDOWN>;
62 label = "GPIO Key Vol-";
63 linux,input-type = <1>;
64 debounce-interval = <100>;
65 };
66 /* VOL+ comes somehow thru the ADC */
67 };
68 };
69
70 &cpu0 {
71 cpu-supply = <&vdd_arm>;
72 };
73
74 &cpu1 {
75 cpu-supply = <&vdd_arm>;
76 };
77
78 &i2c1 {
79 status = "okay";
80 clock-frequency = <400000>;
81
82 tps: tps@2d {
83 compatible = "ti,tps65910";
84 reg = <0x2d>;
85
86 gpio-controller;
87 #gpio-cells = <2>;
88
89 interrupt-parent = <&gpio6>;
90 interrupts = <RK_PA6 IRQ_TYPE_LEVEL_LOW>;
91
92 interrupt-controller;
93 #interrupt-cells = <2>;
94
95 vcc5-supply = <&vcc_io>;
96 vcc6-supply = <&vcc_io>;
97
98 regulators {
99 vcc_rtc: vrtc {
100 regulator-name = "vcc_rtc";
101 regulator-always-on;
102 };
103
104 vcc_io: vio {
105 regulator-name = "vcc_io";
106 regulator-always-on;
107 };
108
109 vdd_arm: vdd1 {
110 regulator-name = "vdd_arm";
111 regulator-min-microvolt = <600000>;
112 regulator-max-microvolt = <1500000>;
113 regulator-boot-on;
114 regulator-always-on;
115 };
116
117 vcc_ddr: vdd2 {
118 regulator-name = "vcc_ddr";
119 regulator-min-microvolt = <600000>;
120 regulator-max-microvolt = <1500000>;
121 regulator-boot-on;
122 regulator-always-on;
123 };
124
125 vcc18_cif: vdig1 {
126 regulator-name = "vcc18_cif";
127 regulator-always-on;
128 };
129
130 vdd_11: vdig2 {
131 regulator-name = "vdd_11";
132 regulator-always-on;
133 };
134
135 vcc_25: vpll {
136 regulator-name = "vcc_25";
137 regulator-always-on;
138 };
139
140 vcc_18: vdac {
141 regulator-name = "vcc_18";
142 regulator-always-on;
143 };
144
145 vcc25_hdmi: vaux1 {
146 regulator-name = "vcc25_hdmi";
147 regulator-always-on;
148 };
149
150 vcca_33: vaux2 {
151 regulator-name = "vcca_33";
152 regulator-always-on;
153 };
154
155 vcc_tp: vaux33 {
156 regulator-name = "vcc_tp";
157 regulator-always-on;
158 };
159
160 vcc28_cif: vmmc {
161 regulator-name = "vcc28_cif";
162 regulator-always-on;
163 };
164 };
165 };
166 };
167
168 &mmc0 { /* sdmmc */
169 status = "okay";
170 pinctrl-names = "default";
171 pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
172 vmmc-supply = <&vcc_sd0>;
173 bus-width = <4>;
174 cap-mmc-highspeed;
175 cap-sd-highspeed;
176 disable-wp;
177 };
178
179 &mmc1 { /* wifi */
180 status = "okay";
181 non-removable;
182
183 pinctrl-names = "default";
184 pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
185
186 bus-width = <4>;
187 };
188
189 &pwm3 {
190 status = "okay";
191 };
192
193 &uart0 {
194 status = "okay";
195 };
196
197 &uart1 {
198 status = "okay";
199 };
200
201 &uart2 {
202 status = "okay";
203 };
204
205 &uart3 {
206 status = "okay";
207 };
208
209 &wdt {
210 status = "okay";
211 };