| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2014, 2015 FUKAUMI Naoki <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include <dt-bindings/input/input.h> |
| 8 |
#include "rk3066a.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Rayeager PX2"; |
| 12 |
compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
mmc0 = &mmc0; |
| 16 |
mmc1 = &mmc1; |
| 17 |
mmc2 = &emmc; |
| 18 |
}; |
| 19 |
|
| 20 |
memory@60000000 { |
| 21 |
device_type = "memory"; |
| 22 |
reg = <0x60000000 0x40000000>; |
| 23 |
}; |
| 24 |
|
| 25 |
ir: ir-receiver { |
| 26 |
compatible = "gpio-ir-receiver"; |
| 27 |
gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>; |
| 28 |
pinctrl-names = "default"; |
| 29 |
pinctrl-0 = <&ir_int>; |
| 30 |
}; |
| 31 |
|
| 32 |
keys: gpio-keys { |
| 33 |
compatible = "gpio-keys"; |
| 34 |
|
| 35 |
key-power { |
| 36 |
wakeup-source; |
| 37 |
gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>; |
| 38 |
label = "GPIO Power"; |
| 39 |
linux,code = <KEY_POWER>; |
| 40 |
pinctrl-names = "default"; |
| 41 |
pinctrl-0 = <&pwr_key>; |
| 42 |
}; |
| 43 |
}; |
| 44 |
|
| 45 |
vdd_log: regulator-vdd-log { |
| 46 |
compatible = "pwm-regulator"; |
| 47 |
pwms = <&pwm3 0 1000>; |
| 48 |
regulator-name = "vdd_log"; |
| 49 |
regulator-min-microvolt = <1200000>; |
| 50 |
regulator-max-microvolt = <1200000>; |
| 51 |
regulator-always-on; |
| 52 |
voltage-table = <1000000 100>, |
| 53 |
<1200000 42>; |
| 54 |
status = "okay"; |
| 55 |
}; |
| 56 |
|
| 57 |
vsys: regulator-vsys { |
| 58 |
compatible = "regulator-fixed"; |
| 59 |
regulator-name = "vsys"; |
| 60 |
regulator-min-microvolt = <5000000>; |
| 61 |
regulator-max-microvolt = <5000000>; |
| 62 |
regulator-always-on; |
| 63 |
regulator-boot-on; |
| 64 |
}; |
| 65 |
|
| 66 |
/* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */ |
| 67 |
vcc_stdby: regulator-stdby { |
| 68 |
compatible = "regulator-fixed"; |
| 69 |
regulator-name = "5v_stdby"; |
| 70 |
regulator-min-microvolt = <5000000>; |
| 71 |
regulator-max-microvolt = <5000000>; |
| 72 |
regulator-always-on; |
| 73 |
regulator-boot-on; |
| 74 |
}; |
| 75 |
|
| 76 |
vcc_emmc: regulator-emmc { |
| 77 |
compatible = "regulator-fixed"; |
| 78 |
regulator-name = "emmc_vccq"; |
| 79 |
regulator-min-microvolt = <3000000>; |
| 80 |
regulator-max-microvolt = <3000000>; |
| 81 |
vin-supply = <&vsys>; |
| 82 |
}; |
| 83 |
|
| 84 |
vcc_sata: regulator-sata { |
| 85 |
compatible = "regulator-fixed"; |
| 86 |
enable-active-high; |
| 87 |
gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; |
| 88 |
pinctrl-names = "default"; |
| 89 |
pinctrl-0 = <&sata_pwr>; |
| 90 |
regulator-name = "usb_5v"; |
| 91 |
regulator-min-microvolt = <5000000>; |
| 92 |
regulator-max-microvolt = <5000000>; |
| 93 |
regulator-always-on; |
| 94 |
vin-supply = <&vcc_stdby>; |
| 95 |
}; |
| 96 |
|
| 97 |
vcc_sd: regulator-sdmmc { |
| 98 |
compatible = "regulator-fixed"; |
| 99 |
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; |
| 100 |
pinctrl-names = "default"; |
| 101 |
pinctrl-0 = <&sdmmc_pwr>; |
| 102 |
regulator-name = "vcc_sd"; |
| 103 |
regulator-min-microvolt = <3300000>; |
| 104 |
regulator-max-microvolt = <3300000>; |
| 105 |
startup-delay-us = <100000>; |
| 106 |
vin-supply = <&vcc_io>; |
| 107 |
}; |
| 108 |
|
| 109 |
vcc_host: regulator-usb-host { |
| 110 |
compatible = "regulator-fixed"; |
| 111 |
enable-active-high; |
| 112 |
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; |
| 113 |
pinctrl-names = "default"; |
| 114 |
pinctrl-0 = <&host_drv>; |
| 115 |
regulator-name = "host-pwr"; |
| 116 |
regulator-min-microvolt = <5000000>; |
| 117 |
regulator-max-microvolt = <5000000>; |
| 118 |
regulator-always-on; |
| 119 |
vin-supply = <&vcc_stdby>; |
| 120 |
}; |
| 121 |
|
| 122 |
vcc_otg: regulator-usb-otg { |
| 123 |
compatible = "regulator-fixed"; |
| 124 |
enable-active-high; |
| 125 |
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 126 |
pinctrl-names = "default"; |
| 127 |
pinctrl-0 = <&otg_drv>; |
| 128 |
regulator-name = "vcc_otg"; |
| 129 |
regulator-min-microvolt = <5000000>; |
| 130 |
regulator-max-microvolt = <5000000>; |
| 131 |
regulator-always-on; |
| 132 |
vin-supply = <&vcc_stdby>; |
| 133 |
}; |
| 134 |
}; |
| 135 |
|
| 136 |
&cpu0 { |
| 137 |
cpu-supply = <&vdd_arm>; |
| 138 |
}; |
| 139 |
|
| 140 |
&cpu1 { |
| 141 |
cpu-supply = <&vdd_arm>; |
| 142 |
}; |
| 143 |
|
| 144 |
&emac { |
| 145 |
phy = <&phy0>; |
| 146 |
phy-supply = <&vcc_rmii>; |
| 147 |
pinctrl-names = "default"; |
| 148 |
pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>; |
| 149 |
status = "okay"; |
| 150 |
|
| 151 |
mdio { |
| 152 |
#address-cells = <1>; |
| 153 |
#size-cells = <0>; |
| 154 |
|
| 155 |
phy0: ethernet-phy@0 { |
| 156 |
reg = <0>; |
| 157 |
reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; |
| 158 |
}; |
| 159 |
}; |
| 160 |
}; |
| 161 |
|
| 162 |
&emmc { |
| 163 |
bus-width = <8>; |
| 164 |
cap-mmc-highspeed; |
| 165 |
non-removable; |
| 166 |
pinctrl-names = "default"; |
| 167 |
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; |
| 168 |
vmmc-supply = <&vcc_emmc>; |
| 169 |
vqmmc-supply = <&vcc_emmc>; |
| 170 |
status = "okay"; |
| 171 |
}; |
| 172 |
|
| 173 |
&i2c0 { |
| 174 |
clock-frequency = <400000>; |
| 175 |
status = "okay"; |
| 176 |
|
| 177 |
ak8963: ak8963@d { |
| 178 |
compatible = "asahi-kasei,ak8975"; |
| 179 |
reg = <0x0d>; |
| 180 |
interrupt-parent = <&gpio4>; |
| 181 |
interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>; |
| 182 |
pinctrl-names = "default"; |
| 183 |
pinctrl-0 = <&comp_int>; |
| 184 |
}; |
| 185 |
|
| 186 |
mma8452: mma8452@1d { |
| 187 |
compatible = "fsl,mma8452"; |
| 188 |
reg = <0x1d>; |
| 189 |
interrupt-parent = <&gpio4>; |
| 190 |
interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>; |
| 191 |
pinctrl-names = "default"; |
| 192 |
pinctrl-0 = <&gsensor_int>; |
| 193 |
}; |
| 194 |
}; |
| 195 |
|
| 196 |
&i2c1 { |
| 197 |
clock-frequency = <400000>; |
| 198 |
status = "okay"; |
| 199 |
|
| 200 |
tps: tps@2d { |
| 201 |
compatible = "ti,tps65910"; |
| 202 |
reg = <0x2d>; |
| 203 |
|
| 204 |
gpio-controller; |
| 205 |
#gpio-cells = <2>; |
| 206 |
|
| 207 |
interrupt-parent = <&gpio6>; |
| 208 |
interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>; |
| 209 |
|
| 210 |
interrupt-controller; |
| 211 |
#interrupt-cells = <2>; |
| 212 |
|
| 213 |
pinctrl-names = "default"; |
| 214 |
pinctrl-0 = <&pmic_int>, <&pwr_hold>; |
| 215 |
|
| 216 |
vcc1-supply = <&vsys>; |
| 217 |
vcc2-supply = <&vsys>; |
| 218 |
vcc3-supply = <&vsys>; |
| 219 |
vcc4-supply = <&vsys>; |
| 220 |
vcc5-supply = <&vcc_io>; |
| 221 |
vcc6-supply = <&vcc_io>; |
| 222 |
vcc7-supply = <&vsys>; |
| 223 |
vccio-supply = <&vsys>; |
| 224 |
|
| 225 |
regulators { |
| 226 |
vcc_rtc: vrtc { |
| 227 |
regulator-name = "vcc_rtc"; |
| 228 |
regulator-always-on; |
| 229 |
}; |
| 230 |
|
| 231 |
vcc_io: vio { |
| 232 |
regulator-name = "vcc_io"; |
| 233 |
regulator-min-microvolt = <3300000>; |
| 234 |
regulator-max-microvolt = <3300000>; |
| 235 |
regulator-always-on; |
| 236 |
}; |
| 237 |
|
| 238 |
vdd_arm: vdd1 { |
| 239 |
regulator-name = "vdd_arm"; |
| 240 |
regulator-min-microvolt = <600000>; |
| 241 |
regulator-max-microvolt = <1500000>; |
| 242 |
regulator-always-on; |
| 243 |
regulator-boot-on; |
| 244 |
}; |
| 245 |
|
| 246 |
vcc_ddr: vdd2 { |
| 247 |
regulator-name = "vcc_ddr"; |
| 248 |
regulator-min-microvolt = <600000>; |
| 249 |
regulator-max-microvolt = <1500000>; |
| 250 |
regulator-always-on; |
| 251 |
regulator-boot-on; |
| 252 |
}; |
| 253 |
|
| 254 |
vcc18: vdig1 { |
| 255 |
regulator-name = "vcc18"; |
| 256 |
regulator-min-microvolt = <1800000>; |
| 257 |
regulator-max-microvolt = <1800000>; |
| 258 |
regulator-always-on; |
| 259 |
}; |
| 260 |
|
| 261 |
vdd_11: vdig2 { |
| 262 |
regulator-name = "vdd_11"; |
| 263 |
regulator-min-microvolt = <1100000>; |
| 264 |
regulator-max-microvolt = <1100000>; |
| 265 |
regulator-always-on; |
| 266 |
}; |
| 267 |
|
| 268 |
vcc_25: vpll { |
| 269 |
regulator-name = "vcc_25"; |
| 270 |
regulator-min-microvolt = <2500000>; |
| 271 |
regulator-max-microvolt = <2500000>; |
| 272 |
regulator-always-on; |
| 273 |
}; |
| 274 |
|
| 275 |
vccio_wl: vdac { |
| 276 |
regulator-name = "vccio_wl"; |
| 277 |
regulator-min-microvolt = <1800000>; |
| 278 |
regulator-max-microvolt = <1800000>; |
| 279 |
}; |
| 280 |
|
| 281 |
vcc25_hdmi: vaux1 { |
| 282 |
regulator-name = "vcc25_hdmi"; |
| 283 |
regulator-min-microvolt = <2500000>; |
| 284 |
regulator-max-microvolt = <2500000>; |
| 285 |
}; |
| 286 |
|
| 287 |
vcca_33: vaux2 { |
| 288 |
regulator-name = "vcca_33"; |
| 289 |
regulator-min-microvolt = <3300000>; |
| 290 |
regulator-max-microvolt = <3300000>; |
| 291 |
}; |
| 292 |
|
| 293 |
vcc_rmii: vaux33 { |
| 294 |
regulator-name = "vcc_rmii"; |
| 295 |
regulator-min-microvolt = <3300000>; |
| 296 |
regulator-max-microvolt = <3300000>; |
| 297 |
}; |
| 298 |
|
| 299 |
vcc28_cif: vmmc { |
| 300 |
regulator-name = "vcc28_cif"; |
| 301 |
regulator-min-microvolt = <2800000>; |
| 302 |
regulator-max-microvolt = <2800000>; |
| 303 |
}; |
| 304 |
}; |
| 305 |
}; |
| 306 |
}; |
| 307 |
|
| 308 |
&i2c2 { |
| 309 |
status = "okay"; |
| 310 |
}; |
| 311 |
|
| 312 |
&i2c3 { |
| 313 |
status = "okay"; |
| 314 |
}; |
| 315 |
|
| 316 |
&i2c4 { |
| 317 |
status = "okay"; |
| 318 |
}; |
| 319 |
|
| 320 |
&mmc0 { |
| 321 |
bus-width = <4>; |
| 322 |
disable-wp; |
| 323 |
pinctrl-names = "default"; |
| 324 |
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; |
| 325 |
vmmc-supply = <&vcc_sd>; |
| 326 |
cap-mmc-highspeed; |
| 327 |
cap-sd-highspeed; |
| 328 |
status = "okay"; |
| 329 |
}; |
| 330 |
|
| 331 |
&mmc1 { |
| 332 |
bus-width = <4>; |
| 333 |
non-removable; |
| 334 |
pinctrl-names = "default"; |
| 335 |
pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>; |
| 336 |
vmmc-supply = <&vccio_wl>; |
| 337 |
status = "okay"; |
| 338 |
}; |
| 339 |
|
| 340 |
&pinctrl { |
| 341 |
pcfg_output_high: pcfg-output-high { |
| 342 |
output-high; |
| 343 |
}; |
| 344 |
|
| 345 |
ak8963 { |
| 346 |
comp_int: comp-int { |
| 347 |
rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_default>; |
| 348 |
}; |
| 349 |
}; |
| 350 |
|
| 351 |
emac { |
| 352 |
rmii_rst: rmii-rst { |
| 353 |
rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_output_high>; |
| 354 |
}; |
| 355 |
}; |
| 356 |
|
| 357 |
ir { |
| 358 |
ir_int: ir-int { |
| 359 |
rockchip,pins = <6 RK_PA1 RK_FUNC_GPIO &pcfg_pull_default>; |
| 360 |
}; |
| 361 |
}; |
| 362 |
|
| 363 |
keys { |
| 364 |
pwr_key: pwr-key { |
| 365 |
rockchip,pins = <6 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>; |
| 366 |
}; |
| 367 |
}; |
| 368 |
|
| 369 |
mma8452 { |
| 370 |
gsensor_int: gsensor-int { |
| 371 |
rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_default>; |
| 372 |
}; |
| 373 |
}; |
| 374 |
|
| 375 |
mmc { |
| 376 |
sdmmc_pwr: sdmmc-pwr { |
| 377 |
rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>; |
| 378 |
}; |
| 379 |
}; |
| 380 |
|
| 381 |
usb_host { |
| 382 |
host_drv: host-drv { |
| 383 |
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>; |
| 384 |
}; |
| 385 |
|
| 386 |
hub_rst: hub-rst { |
| 387 |
rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_output_high>; |
| 388 |
}; |
| 389 |
|
| 390 |
sata_pwr: sata-pwr { |
| 391 |
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_default>; |
| 392 |
}; |
| 393 |
|
| 394 |
sata_reset: sata-reset { |
| 395 |
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>; |
| 396 |
}; |
| 397 |
}; |
| 398 |
|
| 399 |
usb_otg { |
| 400 |
otg_drv: otg-drv { |
| 401 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>; |
| 402 |
}; |
| 403 |
}; |
| 404 |
|
| 405 |
tps { |
| 406 |
pmic_int: pmic-int { |
| 407 |
rockchip,pins = <6 RK_PA4 RK_FUNC_GPIO &pcfg_pull_default>; |
| 408 |
}; |
| 409 |
|
| 410 |
pwr_hold: pwr-hold { |
| 411 |
rockchip,pins = <6 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; |
| 412 |
}; |
| 413 |
}; |
| 414 |
}; |
| 415 |
|
| 416 |
&pwm1 { |
| 417 |
status = "okay"; |
| 418 |
}; |
| 419 |
|
| 420 |
&pwm2 { |
| 421 |
status = "okay"; |
| 422 |
}; |
| 423 |
|
| 424 |
&pwm3 { |
| 425 |
status = "okay"; |
| 426 |
}; |
| 427 |
|
| 428 |
&saradc { |
| 429 |
vref-supply = <&vcc_25>; |
| 430 |
status = "okay"; |
| 431 |
}; |
| 432 |
|
| 433 |
&spi0 { |
| 434 |
status = "okay"; |
| 435 |
}; |
| 436 |
|
| 437 |
&uart0 { |
| 438 |
pinctrl-names = "default"; |
| 439 |
pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; |
| 440 |
status = "okay"; |
| 441 |
}; |
| 442 |
|
| 443 |
&uart2 { |
| 444 |
status = "okay"; |
| 445 |
}; |
| 446 |
|
| 447 |
&uart3 { |
| 448 |
pinctrl-names = "default"; |
| 449 |
pinctrl-0 = <&uart3_xfer>, <&uart3_cts>, <&uart3_rts>; |
| 450 |
status = "okay"; |
| 451 |
}; |
| 452 |
|
| 453 |
&usb_host { |
| 454 |
pinctrl-names = "default"; |
| 455 |
pinctrl-0 = <&hub_rst>, <&sata_reset>; |
| 456 |
status = "okay"; |
| 457 |
}; |
| 458 |
|
| 459 |
&usbphy { |
| 460 |
status = "okay"; |
| 461 |
}; |
| 462 |
|
| 463 |
&usb_otg { |
| 464 |
status = "okay"; |
| 465 |
}; |
| 466 |
|
| 467 |
&wdt { |
| 468 |
status = "okay"; |
| 469 |
}; |