| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd |
| 4 |
* Copyright (c) 2019 Vamrs Limited |
| 5 |
* Copyright (c) 2019 Amarula Solutions(India) |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/pinctrl/rockchip.h> |
| 10 |
|
| 11 |
/ { |
| 12 |
compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288"; |
| 13 |
|
| 14 |
vccio_flash: regulator-vccio-flash { |
| 15 |
compatible = "regulator-fixed"; |
| 16 |
regulator-name = "vccio_flash"; |
| 17 |
regulator-min-microvolt = <1800000>; |
| 18 |
regulator-max-microvolt = <1800000>; |
| 19 |
vin-supply = <&vcc_io>; |
| 20 |
}; |
| 21 |
}; |
| 22 |
|
| 23 |
&emmc { |
| 24 |
bus-width = <8>; |
| 25 |
cap-mmc-highspeed; |
| 26 |
disable-wp; |
| 27 |
non-removable; |
| 28 |
pinctrl-names = "default"; |
| 29 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; |
| 30 |
vmmc-supply = <&vcc_io>; |
| 31 |
vqmmc-supply = <&vccio_flash>; |
| 32 |
status = "okay"; |
| 33 |
}; |
| 34 |
|
| 35 |
&gmac { |
| 36 |
assigned-clocks = <&cru SCLK_MAC>; |
| 37 |
phy-supply = <&vcc_io>; |
| 38 |
snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>; |
| 39 |
}; |
| 40 |
|
| 41 |
&hdmi { |
| 42 |
ddc-i2c-bus = <&i2c5>; |
| 43 |
pinctrl-names = "default"; |
| 44 |
pinctrl-0 = <&hdmi_cec_c0>; |
| 45 |
}; |
| 46 |
|
| 47 |
&i2c0 { |
| 48 |
clock-frequency = <400000>; |
| 49 |
status = "okay"; |
| 50 |
|
| 51 |
rk808: pmic@1b { |
| 52 |
compatible = "rockchip,rk808"; |
| 53 |
reg = <0x1b>; |
| 54 |
interrupt-parent = <&gpio0>; |
| 55 |
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; |
| 56 |
pinctrl-names = "default"; |
| 57 |
pinctrl-0 = <&pmic_int &global_pwroff>; |
| 58 |
rockchip,system-power-controller; |
| 59 |
wakeup-source; |
| 60 |
#clock-cells = <1>; |
| 61 |
clock-output-names = "rk808-clkout1", "rk808-clkout2"; |
| 62 |
|
| 63 |
vcc1-supply = <&vcc5v0_sys>; |
| 64 |
vcc2-supply = <&vcc5v0_sys>; |
| 65 |
vcc3-supply = <&vcc5v0_sys>; |
| 66 |
vcc4-supply = <&vcc5v0_sys>; |
| 67 |
vcc6-supply = <&vcc5v0_sys>; |
| 68 |
vcc7-supply = <&vcc5v0_sys>; |
| 69 |
vcc8-supply = <&vcc_io>; |
| 70 |
vcc9-supply = <&vcc_io>; |
| 71 |
vcc10-supply = <&vcc5v0_sys>; |
| 72 |
vcc11-supply = <&vcc5v0_sys>; |
| 73 |
vcc12-supply = <&vcc_io>; |
| 74 |
vddio-supply = <&vcc_io>; |
| 75 |
|
| 76 |
regulators { |
| 77 |
vdd_cpu: DCDC_REG1 { |
| 78 |
regulator-name = "vdd_arm"; |
| 79 |
regulator-always-on; |
| 80 |
regulator-boot-on; |
| 81 |
regulator-min-microvolt = <750000>; |
| 82 |
regulator-max-microvolt = <1400000>; |
| 83 |
regulator-state-mem { |
| 84 |
regulator-off-in-suspend; |
| 85 |
}; |
| 86 |
}; |
| 87 |
|
| 88 |
vdd_gpu: DCDC_REG2 { |
| 89 |
regulator-name = "vdd_gpu"; |
| 90 |
regulator-always-on; |
| 91 |
regulator-boot-on; |
| 92 |
regulator-min-microvolt = <850000>; |
| 93 |
regulator-max-microvolt = <1250000>; |
| 94 |
regulator-ramp-delay = <6000>; |
| 95 |
regulator-state-mem { |
| 96 |
regulator-off-in-suspend; |
| 97 |
}; |
| 98 |
}; |
| 99 |
|
| 100 |
vcc_ddr: DCDC_REG3 { |
| 101 |
regulator-name = "vcc_ddr"; |
| 102 |
regulator-always-on; |
| 103 |
regulator-boot-on; |
| 104 |
regulator-state-mem { |
| 105 |
regulator-on-in-suspend; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
vcc_io: DCDC_REG4 { |
| 110 |
regulator-name = "vcc_io"; |
| 111 |
regulator-always-on; |
| 112 |
regulator-boot-on; |
| 113 |
regulator-min-microvolt = <3300000>; |
| 114 |
regulator-max-microvolt = <3300000>; |
| 115 |
regulator-state-mem { |
| 116 |
regulator-on-in-suspend; |
| 117 |
regulator-suspend-microvolt = <3300000>; |
| 118 |
}; |
| 119 |
}; |
| 120 |
|
| 121 |
vcc_tp: LDO_REG1 { |
| 122 |
regulator-name = "vcc_tp"; |
| 123 |
regulator-always-on; |
| 124 |
regulator-boot-on; |
| 125 |
regulator-min-microvolt = <3300000>; |
| 126 |
regulator-max-microvolt = <3300000>; |
| 127 |
regulator-state-mem { |
| 128 |
regulator-off-in-suspend; |
| 129 |
}; |
| 130 |
}; |
| 131 |
|
| 132 |
vcca_codec: LDO_REG2 { |
| 133 |
regulator-name = "vcca_codec"; |
| 134 |
regulator-always-on; |
| 135 |
regulator-boot-on; |
| 136 |
regulator-min-microvolt = <3300000>; |
| 137 |
regulator-max-microvolt = <3300000>; |
| 138 |
regulator-state-mem { |
| 139 |
regulator-on-in-suspend; |
| 140 |
regulator-suspend-microvolt = <3300000>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
vdd_10: LDO_REG3 { |
| 145 |
regulator-name = "vdd_10"; |
| 146 |
regulator-always-on; |
| 147 |
regulator-boot-on; |
| 148 |
regulator-min-microvolt = <1000000>; |
| 149 |
regulator-max-microvolt = <1000000>; |
| 150 |
regulator-state-mem { |
| 151 |
regulator-on-in-suspend; |
| 152 |
regulator-suspend-microvolt = <1000000>; |
| 153 |
}; |
| 154 |
}; |
| 155 |
|
| 156 |
vcc_wl: LDO_REG4 { |
| 157 |
regulator-name = "vcc_wl"; |
| 158 |
regulator-always-on; |
| 159 |
regulator-boot-on; |
| 160 |
regulator-min-microvolt = <1800000>; |
| 161 |
regulator-max-microvolt = <1800000>; |
| 162 |
regulator-state-mem { |
| 163 |
regulator-on-in-suspend; |
| 164 |
}; |
| 165 |
}; |
| 166 |
|
| 167 |
vccio_sd: LDO_REG5 { |
| 168 |
regulator-name = "vccio_sd"; |
| 169 |
regulator-always-on; |
| 170 |
regulator-boot-on; |
| 171 |
regulator-min-microvolt = <1800000>; |
| 172 |
regulator-max-microvolt = <3300000>; |
| 173 |
regulator-state-mem { |
| 174 |
regulator-on-in-suspend; |
| 175 |
regulator-suspend-microvolt = <3300000>; |
| 176 |
}; |
| 177 |
}; |
| 178 |
|
| 179 |
vdd10_lcd: LDO_REG6 { |
| 180 |
regulator-name = "vdd10_lcd"; |
| 181 |
regulator-always-on; |
| 182 |
regulator-boot-on; |
| 183 |
regulator-min-microvolt = <1000000>; |
| 184 |
regulator-max-microvolt = <1000000>; |
| 185 |
regulator-state-mem { |
| 186 |
regulator-off-in-suspend; |
| 187 |
}; |
| 188 |
}; |
| 189 |
|
| 190 |
vcc_18: LDO_REG7 { |
| 191 |
regulator-name = "vcc_18"; |
| 192 |
regulator-always-on; |
| 193 |
regulator-boot-on; |
| 194 |
regulator-min-microvolt = <1800000>; |
| 195 |
regulator-max-microvolt = <1800000>; |
| 196 |
regulator-state-mem { |
| 197 |
regulator-on-in-suspend; |
| 198 |
regulator-suspend-microvolt = <1800000>; |
| 199 |
}; |
| 200 |
}; |
| 201 |
|
| 202 |
vcc18_lcd: LDO_REG8 { |
| 203 |
regulator-name = "vcc18_lcd"; |
| 204 |
regulator-always-on; |
| 205 |
regulator-boot-on; |
| 206 |
regulator-min-microvolt = <1800000>; |
| 207 |
regulator-max-microvolt = <1800000>; |
| 208 |
regulator-state-mem { |
| 209 |
regulator-off-in-suspend; |
| 210 |
}; |
| 211 |
}; |
| 212 |
|
| 213 |
vcc_sd: SWITCH_REG1 { |
| 214 |
regulator-name = "vcc_sd"; |
| 215 |
regulator-always-on; |
| 216 |
regulator-boot-on; |
| 217 |
regulator-state-mem { |
| 218 |
regulator-off-in-suspend; |
| 219 |
}; |
| 220 |
}; |
| 221 |
|
| 222 |
vcc_lcd: SWITCH_REG2 { |
| 223 |
regulator-name = "vcc_lcd"; |
| 224 |
regulator-always-on; |
| 225 |
regulator-boot-on; |
| 226 |
regulator-state-mem { |
| 227 |
regulator-off-in-suspend; |
| 228 |
}; |
| 229 |
}; |
| 230 |
}; |
| 231 |
}; |
| 232 |
}; |
| 233 |
|
| 234 |
&i2c1 { |
| 235 |
clock-frequency = <400000>; |
| 236 |
status = "okay"; |
| 237 |
|
| 238 |
hym8563: rtc@51 { |
| 239 |
compatible = "haoyu,hym8563"; |
| 240 |
reg = <0x51>; |
| 241 |
interrupt-parent = <&gpio5>; |
| 242 |
interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>; |
| 243 |
#clock-cells = <0>; |
| 244 |
clock-output-names = "hym8563"; |
| 245 |
pinctrl-names = "default"; |
| 246 |
pinctrl-0 = <&hym8563_int>; |
| 247 |
}; |
| 248 |
}; |
| 249 |
|
| 250 |
&i2c5 { |
| 251 |
status = "okay"; |
| 252 |
}; |
| 253 |
|
| 254 |
&io_domains { |
| 255 |
bb-supply = <&vcc_io>; |
| 256 |
flash0-supply = <&vccio_flash>; |
| 257 |
gpio1830-supply = <&vcc_18>; |
| 258 |
gpio30-supply = <&vcc_io>; |
| 259 |
sdcard-supply = <&vccio_sd>; |
| 260 |
wifi-supply = <&vcc_wl>; |
| 261 |
status = "okay"; |
| 262 |
}; |
| 263 |
|
| 264 |
&pinctrl { |
| 265 |
hym8563 { |
| 266 |
hym8563_int: hym8563-int { |
| 267 |
rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; |
| 268 |
}; |
| 269 |
}; |
| 270 |
|
| 271 |
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { |
| 272 |
drive-strength = <8>; |
| 273 |
}; |
| 274 |
|
| 275 |
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { |
| 276 |
bias-pull-up; |
| 277 |
drive-strength = <8>; |
| 278 |
}; |
| 279 |
|
| 280 |
pmic { |
| 281 |
pmic_int: pmic-int { |
| 282 |
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; |
| 283 |
}; |
| 284 |
}; |
| 285 |
|
| 286 |
sdio-pwrseq { |
| 287 |
wifi_enable_h: wifi-enable-h { |
| 288 |
rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 289 |
}; |
| 290 |
}; |
| 291 |
|
| 292 |
sdmmc { |
| 293 |
sdmmc_bus4: sdmmc-bus4 { |
| 294 |
rockchip,pins = |
| 295 |
<6 RK_PC0 1 &pcfg_pull_up_drv_8ma>, |
| 296 |
<6 RK_PC1 1 &pcfg_pull_up_drv_8ma>, |
| 297 |
<6 RK_PC2 1 &pcfg_pull_up_drv_8ma>, |
| 298 |
<6 RK_PC3 1 &pcfg_pull_up_drv_8ma>; |
| 299 |
}; |
| 300 |
|
| 301 |
sdmmc_clk: sdmmc-clk { |
| 302 |
rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; |
| 303 |
}; |
| 304 |
|
| 305 |
sdmmc_cmd: sdmmc-cmd { |
| 306 |
rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>; |
| 307 |
}; |
| 308 |
}; |
| 309 |
|
| 310 |
vbus_host { |
| 311 |
usb1_en_oc: usb1-en-oc { |
| 312 |
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>; |
| 313 |
}; |
| 314 |
}; |
| 315 |
|
| 316 |
vbus_typec { |
| 317 |
usb0_en_oc: usb0-en-oc { |
| 318 |
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 319 |
}; |
| 320 |
}; |
| 321 |
}; |
| 322 |
|
| 323 |
&sdio_pwrseq { |
| 324 |
/* |
| 325 |
* On the module itself this is one of these (depending |
| 326 |
* on the actual card populated): |
| 327 |
* - SDIO_RESET_L_WL_REG_ON |
| 328 |
* - PDN (power down when low) |
| 329 |
*/ |
| 330 |
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; /* WIFI_REG_ON */ |
| 331 |
}; |
| 332 |
|
| 333 |
&usbphy { |
| 334 |
status = "okay"; |
| 335 |
}; |
| 336 |
|
| 337 |
&usb_host0_ehci { |
| 338 |
status = "okay"; |
| 339 |
}; |
| 340 |
|
| 341 |
&usb_host0_ohci { |
| 342 |
status = "okay"; |
| 343 |
}; |
| 344 |
|
| 345 |
&usb_host1 { |
| 346 |
status = "okay"; |
| 347 |
}; |
| 348 |
|
| 349 |
&usb_otg { |
| 350 |
status = "okay"; |
| 351 |
}; |
| 352 |
|
| 353 |
&vbus_host { |
| 354 |
enable-active-high; |
| 355 |
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */ |
| 356 |
}; |
| 357 |
|
| 358 |
&vbus_typec { |
| 359 |
enable-active-high; |
| 360 |
gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */ |
| 361 |
}; |