| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2016 Paweł Jarosz <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include <dt-bindings/input/input.h> |
| 8 |
#include "rk3066a.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Rikomagic MK808"; |
| 12 |
compatible = "rikomagic,mk808", "rockchip,rk3066a"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
mmc0 = &mmc0; |
| 16 |
mmc1 = &mmc1; |
| 17 |
}; |
| 18 |
|
| 19 |
chosen { |
| 20 |
stdout-path = "serial2:115200n8"; |
| 21 |
}; |
| 22 |
|
| 23 |
memory@60000000 { |
| 24 |
reg = <0x60000000 0x40000000>; |
| 25 |
device_type = "memory"; |
| 26 |
}; |
| 27 |
|
| 28 |
adc-keys { |
| 29 |
compatible = "adc-keys"; |
| 30 |
io-channels = <&saradc 1>; |
| 31 |
io-channel-names = "buttons"; |
| 32 |
keyup-threshold-microvolt = <2500000>; |
| 33 |
poll-interval = <100>; |
| 34 |
|
| 35 |
button-recovery { |
| 36 |
label = "recovery"; |
| 37 |
linux,code = <KEY_VENDOR>; |
| 38 |
press-threshold-microvolt = <0>; |
| 39 |
}; |
| 40 |
}; |
| 41 |
|
| 42 |
gpio-leds { |
| 43 |
compatible = "gpio-leds"; |
| 44 |
|
| 45 |
blue_led: led-0 { |
| 46 |
label = "mk808:blue:power"; |
| 47 |
gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; |
| 48 |
default-state = "off"; |
| 49 |
linux,default-trigger = "default-on"; |
| 50 |
}; |
| 51 |
}; |
| 52 |
|
| 53 |
hdmi_con { |
| 54 |
compatible = "hdmi-connector"; |
| 55 |
type = "c"; |
| 56 |
|
| 57 |
port { |
| 58 |
hdmi_con_in: endpoint { |
| 59 |
remote-endpoint = <&hdmi_out_con>; |
| 60 |
}; |
| 61 |
}; |
| 62 |
}; |
| 63 |
|
| 64 |
vcc_2v5: regulator-vcc-2v5 { |
| 65 |
compatible = "regulator-fixed"; |
| 66 |
regulator-name = "vcc_2v5"; |
| 67 |
regulator-min-microvolt = <2500000>; |
| 68 |
regulator-max-microvolt = <2500000>; |
| 69 |
}; |
| 70 |
|
| 71 |
vcc_io: regulator-vcc-io { |
| 72 |
compatible = "regulator-fixed"; |
| 73 |
regulator-name = "vcc_io"; |
| 74 |
regulator-min-microvolt = <3300000>; |
| 75 |
regulator-max-microvolt = <3300000>; |
| 76 |
}; |
| 77 |
|
| 78 |
vcc_host: regulator-usb-host { |
| 79 |
compatible = "regulator-fixed"; |
| 80 |
enable-active-high; |
| 81 |
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; |
| 82 |
pinctrl-0 = <&host_drv>; |
| 83 |
pinctrl-names = "default"; |
| 84 |
regulator-always-on; |
| 85 |
regulator-name = "host-pwr"; |
| 86 |
regulator-min-microvolt = <5000000>; |
| 87 |
regulator-max-microvolt = <5000000>; |
| 88 |
startup-delay-us = <100000>; |
| 89 |
vin-supply = <&vcc_io>; |
| 90 |
}; |
| 91 |
|
| 92 |
vcc_otg: regulator-usb-otg { |
| 93 |
compatible = "regulator-fixed"; |
| 94 |
enable-active-high; |
| 95 |
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; |
| 96 |
pinctrl-0 = <&otg_drv>; |
| 97 |
pinctrl-names = "default"; |
| 98 |
regulator-always-on; |
| 99 |
regulator-name = "vcc_otg"; |
| 100 |
regulator-min-microvolt = <5000000>; |
| 101 |
regulator-max-microvolt = <5000000>; |
| 102 |
startup-delay-us = <100000>; |
| 103 |
vin-supply = <&vcc_io>; |
| 104 |
}; |
| 105 |
|
| 106 |
vcc_sd: regulator-sdmmc { |
| 107 |
compatible = "regulator-fixed"; |
| 108 |
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; |
| 109 |
pinctrl-0 = <&sdmmc_pwr>; |
| 110 |
pinctrl-names = "default"; |
| 111 |
regulator-name = "vcc_sd"; |
| 112 |
regulator-min-microvolt = <3300000>; |
| 113 |
regulator-max-microvolt = <3300000>; |
| 114 |
startup-delay-us = <100000>; |
| 115 |
vin-supply = <&vcc_io>; |
| 116 |
}; |
| 117 |
|
| 118 |
vcc_wifi: regulator-sdio { |
| 119 |
compatible = "regulator-fixed"; |
| 120 |
enable-active-high; |
| 121 |
gpio = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>; |
| 122 |
pinctrl-0 = <&wifi_pwr>; |
| 123 |
pinctrl-names = "default"; |
| 124 |
regulator-name = "vcc_wifi"; |
| 125 |
regulator-min-microvolt = <3300000>; |
| 126 |
regulator-max-microvolt = <3300000>; |
| 127 |
startup-delay-us = <100000>; |
| 128 |
vin-supply = <&vcc_io>; |
| 129 |
}; |
| 130 |
}; |
| 131 |
|
| 132 |
&hdmi { |
| 133 |
status = "okay"; |
| 134 |
}; |
| 135 |
|
| 136 |
&hdmi_in_vop1 { |
| 137 |
status = "disabled"; |
| 138 |
}; |
| 139 |
|
| 140 |
&hdmi_out { |
| 141 |
hdmi_out_con: endpoint { |
| 142 |
remote-endpoint = <&hdmi_con_in>; |
| 143 |
}; |
| 144 |
}; |
| 145 |
|
| 146 |
&hdmi_sound { |
| 147 |
status = "okay"; |
| 148 |
}; |
| 149 |
|
| 150 |
&i2s0 { |
| 151 |
status = "okay"; |
| 152 |
}; |
| 153 |
|
| 154 |
&mmc0 { |
| 155 |
bus-width = <4>; |
| 156 |
cap-mmc-highspeed; |
| 157 |
cap-sd-highspeed; |
| 158 |
vmmc-supply = <&vcc_sd>; |
| 159 |
status = "okay"; |
| 160 |
}; |
| 161 |
|
| 162 |
&mmc1 { |
| 163 |
bus-width = <4>; |
| 164 |
non-removable; |
| 165 |
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; |
| 166 |
pinctrl-names = "default"; |
| 167 |
vmmc-supply = <&vcc_wifi>; |
| 168 |
#address-cells = <1>; |
| 169 |
#size-cells = <0>; |
| 170 |
status = "okay"; |
| 171 |
|
| 172 |
brcmf: wifi@1 { |
| 173 |
compatible = "brcm,bcm4329-fmac"; |
| 174 |
reg = <1>; |
| 175 |
}; |
| 176 |
}; |
| 177 |
|
| 178 |
&nfc { |
| 179 |
#address-cells = <1>; |
| 180 |
#size-cells = <0>; |
| 181 |
status = "okay"; |
| 182 |
|
| 183 |
nand@0 { |
| 184 |
reg = <0>; |
| 185 |
label = "rk-nand"; |
| 186 |
nand-bus-width = <8>; |
| 187 |
nand-ecc-mode = "hw"; |
| 188 |
nand-ecc-step-size = <1024>; |
| 189 |
nand-ecc-strength = <40>; |
| 190 |
nand-is-boot-medium; |
| 191 |
rockchip,boot-blks = <8>; |
| 192 |
rockchip,boot-ecc-strength = <24>; |
| 193 |
}; |
| 194 |
}; |
| 195 |
|
| 196 |
&pinctrl { |
| 197 |
usb-host { |
| 198 |
host_drv: host-drv { |
| 199 |
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>; |
| 200 |
}; |
| 201 |
}; |
| 202 |
|
| 203 |
usb-otg { |
| 204 |
otg_drv: otg-drv { |
| 205 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>; |
| 206 |
}; |
| 207 |
}; |
| 208 |
|
| 209 |
sdmmc { |
| 210 |
sdmmc_pwr: sdmmc-pwr { |
| 211 |
rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>; |
| 212 |
}; |
| 213 |
}; |
| 214 |
|
| 215 |
sdio { |
| 216 |
wifi_pwr: wifi-pwr { |
| 217 |
rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 218 |
}; |
| 219 |
}; |
| 220 |
}; |
| 221 |
|
| 222 |
&saradc { |
| 223 |
vref-supply = <&vcc_2v5>; |
| 224 |
status = "okay"; |
| 225 |
}; |
| 226 |
|
| 227 |
&uart2 { |
| 228 |
status = "okay"; |
| 229 |
}; |
| 230 |
|
| 231 |
&usb_host { |
| 232 |
status = "okay"; |
| 233 |
}; |
| 234 |
|
| 235 |
&usb_otg { |
| 236 |
status = "okay"; |
| 237 |
}; |
| 238 |
|
| 239 |
&usbphy { |
| 240 |
status = "okay"; |
| 241 |
}; |
| 242 |
|
| 243 |
&vop0 { |
| 244 |
status = "okay"; |
| 245 |
}; |
| 246 |
|
| 247 |
&wdt { |
| 248 |
status = "okay"; |
| 249 |
}; |