| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Google Veyron (and derivatives) fragment for sdmmc cards |
| 4 |
* |
| 5 |
* Copyright 2015 Google, Inc |
| 6 |
*/ |
| 7 |
|
| 8 |
/ { |
| 9 |
aliases { |
| 10 |
mmc1 = &sdmmc; |
| 11 |
}; |
| 12 |
}; |
| 13 |
|
| 14 |
&io_domains { |
| 15 |
sdcard-supply = <&vccio_sd>; |
| 16 |
}; |
| 17 |
|
| 18 |
&pinctrl { |
| 19 |
sdmmc { |
| 20 |
/* |
| 21 |
* We run sdmmc at max speed; bump up drive strength. |
| 22 |
* We also have external pulls, so disable the internal ones. |
| 23 |
*/ |
| 24 |
sdmmc_bus4: sdmmc-bus4 { |
| 25 |
rockchip,pins = <6 RK_PC0 1 &pcfg_pull_none_drv_8ma>, |
| 26 |
<6 RK_PC1 1 &pcfg_pull_none_drv_8ma>, |
| 27 |
<6 RK_PC2 1 &pcfg_pull_none_drv_8ma>, |
| 28 |
<6 RK_PC3 1 &pcfg_pull_none_drv_8ma>; |
| 29 |
}; |
| 30 |
|
| 31 |
sdmmc_clk: sdmmc-clk { |
| 32 |
rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>; |
| 33 |
}; |
| 34 |
|
| 35 |
sdmmc_cmd: sdmmc-cmd { |
| 36 |
rockchip,pins = <6 RK_PC5 1 &pcfg_pull_none_drv_8ma>; |
| 37 |
}; |
| 38 |
|
| 39 |
/* |
| 40 |
* Builtin CD line is hooked to ground to prevent JTAG at boot |
| 41 |
* (and also to get the voltage rail correct). |
| 42 |
* Configure gpio6_C6 as GPIO so dw_mmc builtin CD doesn't |
| 43 |
* think there's a card inserted |
| 44 |
*/ |
| 45 |
sdmmc_cd_disabled: sdmmc-cd-disabled { |
| 46 |
rockchip,pins = <6 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 47 |
}; |
| 48 |
|
| 49 |
/* This is where we actually hook up CD */ |
| 50 |
sdmmc_cd_pin: sdmmc-cd-pin { |
| 51 |
rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 52 |
}; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
&rk808 { |
| 57 |
vcc9-supply = <&vcc_5v>; |
| 58 |
|
| 59 |
regulators { |
| 60 |
vccio_sd: LDO_REG4 { |
| 61 |
regulator-name = "vccio_sd"; |
| 62 |
regulator-min-microvolt = <1800000>; |
| 63 |
regulator-max-microvolt = <3300000>; |
| 64 |
regulator-state-mem { |
| 65 |
regulator-off-in-suspend; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
vcc33_sd: LDO_REG5 { |
| 70 |
regulator-name = "vcc33_sd"; |
| 71 |
regulator-min-microvolt = <3300000>; |
| 72 |
regulator-max-microvolt = <3300000>; |
| 73 |
regulator-state-mem { |
| 74 |
regulator-off-in-suspend; |
| 75 |
}; |
| 76 |
}; |
| 77 |
}; |
| 78 |
}; |
| 79 |
|
| 80 |
&sdmmc { |
| 81 |
status = "okay"; |
| 82 |
|
| 83 |
bus-width = <4>; |
| 84 |
cap-mmc-highspeed; |
| 85 |
cap-sd-highspeed; |
| 86 |
card-detect-delay = <200>; |
| 87 |
cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>; |
| 88 |
rockchip,default-sample-phase = <90>; |
| 89 |
sd-uhs-sdr12; |
| 90 |
sd-uhs-sdr25; |
| 91 |
sd-uhs-sdr50; |
| 92 |
sd-uhs-sdr104; |
| 93 |
vmmc-supply = <&vcc33_sd>; |
| 94 |
vqmmc-supply = <&vccio_sd>; |
| 95 |
}; |