| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2013 Heiko Stuebner <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include <dt-bindings/input/input.h> |
| 8 |
#include "rk3188.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "Radxa Rock"; |
| 12 |
compatible = "radxa,rock", "rockchip,rk3188"; |
| 13 |
|
| 14 |
aliases { |
| 15 |
mmc0 = &mmc0; |
| 16 |
}; |
| 17 |
|
| 18 |
memory@60000000 { |
| 19 |
device_type = "memory"; |
| 20 |
reg = <0x60000000 0x80000000>; |
| 21 |
}; |
| 22 |
|
| 23 |
gpio-keys { |
| 24 |
compatible = "gpio-keys"; |
| 25 |
autorepeat; |
| 26 |
|
| 27 |
key-power { |
| 28 |
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>; |
| 29 |
linux,code = <KEY_POWER>; |
| 30 |
label = "GPIO Key Power"; |
| 31 |
linux,input-type = <1>; |
| 32 |
wakeup-source; |
| 33 |
debounce-interval = <100>; |
| 34 |
}; |
| 35 |
}; |
| 36 |
|
| 37 |
gpio-leds { |
| 38 |
compatible = "gpio-leds"; |
| 39 |
|
| 40 |
green_led: led-0 { |
| 41 |
label = "rock:green:user1"; |
| 42 |
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>; |
| 43 |
default-state = "off"; |
| 44 |
}; |
| 45 |
|
| 46 |
blue_led: led-1 { |
| 47 |
label = "rock:blue:user2"; |
| 48 |
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>; |
| 49 |
default-state = "off"; |
| 50 |
}; |
| 51 |
|
| 52 |
sleep_led: led-2 { |
| 53 |
label = "rock:red:power"; |
| 54 |
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; |
| 55 |
default-state = "off"; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
sound { |
| 60 |
compatible = "simple-audio-card"; |
| 61 |
simple-audio-card,name = "SPDIF"; |
| 62 |
|
| 63 |
simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */ |
| 64 |
cpu { sound-dai = <&spdif>; }; |
| 65 |
codec { sound-dai = <&spdif_out>; }; |
| 66 |
}; |
| 67 |
}; |
| 68 |
|
| 69 |
spdif_out: spdif-out { |
| 70 |
compatible = "linux,spdif-dit"; |
| 71 |
#sound-dai-cells = <0>; |
| 72 |
}; |
| 73 |
|
| 74 |
ir_recv: ir-receiver { |
| 75 |
compatible = "gpio-ir-receiver"; |
| 76 |
gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; |
| 77 |
pinctrl-names = "default"; |
| 78 |
pinctrl-0 = <&ir_recv_pin>; |
| 79 |
}; |
| 80 |
|
| 81 |
vcc_otg: regulator-usb-otg { |
| 82 |
compatible = "regulator-fixed"; |
| 83 |
enable-active-high; |
| 84 |
gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>; |
| 85 |
pinctrl-names = "default"; |
| 86 |
pinctrl-0 = <&otg_vbus_drv>; |
| 87 |
regulator-name = "otg-vbus"; |
| 88 |
regulator-min-microvolt = <5000000>; |
| 89 |
regulator-max-microvolt = <5000000>; |
| 90 |
regulator-always-on; |
| 91 |
regulator-boot-on; |
| 92 |
}; |
| 93 |
|
| 94 |
vcc_sd0: regulator-sdmmc { |
| 95 |
compatible = "regulator-fixed"; |
| 96 |
regulator-name = "sdmmc-supply"; |
| 97 |
regulator-min-microvolt = <3300000>; |
| 98 |
regulator-max-microvolt = <3300000>; |
| 99 |
gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; |
| 100 |
pinctrl-names = "default"; |
| 101 |
pinctrl-0 = <&sdmmc_pwr>; |
| 102 |
startup-delay-us = <100000>; |
| 103 |
vin-supply = <&vcc_io>; |
| 104 |
}; |
| 105 |
|
| 106 |
vcc_host: regulator-usb-host { |
| 107 |
compatible = "regulator-fixed"; |
| 108 |
enable-active-high; |
| 109 |
gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; |
| 110 |
pinctrl-names = "default"; |
| 111 |
pinctrl-0 = <&host_vbus_drv>; |
| 112 |
regulator-name = "host-pwr"; |
| 113 |
regulator-min-microvolt = <5000000>; |
| 114 |
regulator-max-microvolt = <5000000>; |
| 115 |
regulator-always-on; |
| 116 |
regulator-boot-on; |
| 117 |
}; |
| 118 |
|
| 119 |
vsys: regulator-vsys { |
| 120 |
compatible = "regulator-fixed"; |
| 121 |
regulator-name = "vsys"; |
| 122 |
regulator-min-microvolt = <5000000>; |
| 123 |
regulator-max-microvolt = <5000000>; |
| 124 |
regulator-boot-on; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
&emac { |
| 129 |
phy = <&phy0>; |
| 130 |
phy-supply = <&vcc_rmii>; |
| 131 |
pinctrl-names = "default"; |
| 132 |
pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>; |
| 133 |
status = "okay"; |
| 134 |
|
| 135 |
mdio { |
| 136 |
#address-cells = <1>; |
| 137 |
#size-cells = <0>; |
| 138 |
|
| 139 |
phy0: ethernet-phy@0 { |
| 140 |
reg = <0>; |
| 141 |
interrupt-parent = <&gpio3>; |
| 142 |
interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>; |
| 143 |
}; |
| 144 |
}; |
| 145 |
}; |
| 146 |
|
| 147 |
&cpu0 { |
| 148 |
cpu-supply = <&vdd_arm>; |
| 149 |
}; |
| 150 |
|
| 151 |
&cpu1 { |
| 152 |
cpu-supply = <&vdd_arm>; |
| 153 |
}; |
| 154 |
|
| 155 |
&cpu2 { |
| 156 |
cpu-supply = <&vdd_arm>; |
| 157 |
}; |
| 158 |
|
| 159 |
&cpu3 { |
| 160 |
cpu-supply = <&vdd_arm>; |
| 161 |
}; |
| 162 |
|
| 163 |
&gpu { |
| 164 |
status = "okay"; |
| 165 |
}; |
| 166 |
|
| 167 |
&i2c1 { |
| 168 |
status = "okay"; |
| 169 |
clock-frequency = <400000>; |
| 170 |
|
| 171 |
rtc@51 { |
| 172 |
compatible = "haoyu,hym8563"; |
| 173 |
reg = <0x51>; |
| 174 |
interrupt-parent = <&gpio0>; |
| 175 |
interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>; |
| 176 |
pinctrl-names = "default"; |
| 177 |
pinctrl-0 = <&rtc_int>; |
| 178 |
#clock-cells = <0>; |
| 179 |
clock-output-names = "xin32k"; |
| 180 |
}; |
| 181 |
|
| 182 |
act8846: act8846@5a { |
| 183 |
compatible = "active-semi,act8846"; |
| 184 |
reg = <0x5a>; |
| 185 |
status = "okay"; |
| 186 |
system-power-controller; |
| 187 |
|
| 188 |
pinctrl-names = "default"; |
| 189 |
pinctrl-0 = <&act8846_dvs0_ctl>; |
| 190 |
|
| 191 |
vp1-supply = <&vsys>; |
| 192 |
vp2-supply = <&vsys>; |
| 193 |
vp3-supply = <&vsys>; |
| 194 |
vp4-supply = <&vsys>; |
| 195 |
inl1-supply = <&vcc_io>; |
| 196 |
inl2-supply = <&vsys>; |
| 197 |
inl3-supply = <&vsys>; |
| 198 |
|
| 199 |
regulators { |
| 200 |
vcc_ddr: REG1 { |
| 201 |
regulator-name = "VCC_DDR"; |
| 202 |
regulator-min-microvolt = <1200000>; |
| 203 |
regulator-max-microvolt = <1200000>; |
| 204 |
regulator-always-on; |
| 205 |
}; |
| 206 |
|
| 207 |
vdd_log: REG2 { |
| 208 |
regulator-name = "VDD_LOG"; |
| 209 |
regulator-min-microvolt = <1000000>; |
| 210 |
regulator-max-microvolt = <1000000>; |
| 211 |
regulator-always-on; |
| 212 |
}; |
| 213 |
|
| 214 |
vdd_arm: REG3 { |
| 215 |
regulator-name = "VDD_ARM"; |
| 216 |
regulator-min-microvolt = <875000>; |
| 217 |
regulator-max-microvolt = <1350000>; |
| 218 |
regulator-always-on; |
| 219 |
}; |
| 220 |
|
| 221 |
vcc_io: REG4 { |
| 222 |
regulator-name = "VCC_IO"; |
| 223 |
regulator-min-microvolt = <3300000>; |
| 224 |
regulator-max-microvolt = <3300000>; |
| 225 |
regulator-always-on; |
| 226 |
}; |
| 227 |
|
| 228 |
vdd_10: REG5 { |
| 229 |
regulator-name = "VDD_10"; |
| 230 |
regulator-min-microvolt = <1000000>; |
| 231 |
regulator-max-microvolt = <1000000>; |
| 232 |
regulator-always-on; |
| 233 |
}; |
| 234 |
|
| 235 |
vdd_hdmi: REG6 { |
| 236 |
regulator-name = "VDD_HDMI"; |
| 237 |
regulator-min-microvolt = <2500000>; |
| 238 |
regulator-max-microvolt = <2500000>; |
| 239 |
regulator-always-on; |
| 240 |
}; |
| 241 |
|
| 242 |
vcc18: REG7 { |
| 243 |
regulator-name = "VCC_18"; |
| 244 |
regulator-min-microvolt = <1800000>; |
| 245 |
regulator-max-microvolt = <1800000>; |
| 246 |
regulator-always-on; |
| 247 |
}; |
| 248 |
|
| 249 |
vcca_33: REG8 { |
| 250 |
regulator-name = "VCCA_33"; |
| 251 |
regulator-min-microvolt = <3300000>; |
| 252 |
regulator-max-microvolt = <3300000>; |
| 253 |
regulator-always-on; |
| 254 |
}; |
| 255 |
|
| 256 |
vcc_rmii: REG9 { |
| 257 |
regulator-name = "VCC_RMII"; |
| 258 |
regulator-min-microvolt = <3300000>; |
| 259 |
regulator-max-microvolt = <3300000>; |
| 260 |
}; |
| 261 |
|
| 262 |
vccio_wl: REG10 { |
| 263 |
regulator-name = "VCCIO_WL"; |
| 264 |
regulator-min-microvolt = <3300000>; |
| 265 |
regulator-max-microvolt = <3300000>; |
| 266 |
regulator-always-on; |
| 267 |
}; |
| 268 |
|
| 269 |
vcc_18: REG11 { |
| 270 |
regulator-name = "VCC18_IO"; |
| 271 |
regulator-min-microvolt = <1800000>; |
| 272 |
regulator-max-microvolt = <1800000>; |
| 273 |
regulator-always-on; |
| 274 |
}; |
| 275 |
|
| 276 |
vcc28: REG12 { |
| 277 |
regulator-name = "VCC_28"; |
| 278 |
regulator-min-microvolt = <2800000>; |
| 279 |
regulator-max-microvolt = <2800000>; |
| 280 |
regulator-always-on; |
| 281 |
}; |
| 282 |
}; |
| 283 |
}; |
| 284 |
}; |
| 285 |
|
| 286 |
&mmc0 { |
| 287 |
status = "okay"; |
| 288 |
pinctrl-names = "default"; |
| 289 |
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; |
| 290 |
vmmc-supply = <&vcc_sd0>; |
| 291 |
|
| 292 |
bus-width = <4>; |
| 293 |
cap-mmc-highspeed; |
| 294 |
cap-sd-highspeed; |
| 295 |
disable-wp; |
| 296 |
}; |
| 297 |
|
| 298 |
&pwm1 { |
| 299 |
status = "okay"; |
| 300 |
}; |
| 301 |
|
| 302 |
&pwm2 { |
| 303 |
status = "okay"; |
| 304 |
}; |
| 305 |
|
| 306 |
&pwm3 { |
| 307 |
status = "okay"; |
| 308 |
}; |
| 309 |
|
| 310 |
&pinctrl { |
| 311 |
pcfg_output_low: pcfg-output-low { |
| 312 |
output-low; |
| 313 |
}; |
| 314 |
|
| 315 |
act8846 { |
| 316 |
act8846_dvs0_ctl: act8846-dvs0-ctl { |
| 317 |
rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>; |
| 318 |
}; |
| 319 |
}; |
| 320 |
|
| 321 |
hym8563 { |
| 322 |
rtc_int: rtc-int { |
| 323 |
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 324 |
}; |
| 325 |
}; |
| 326 |
|
| 327 |
lan8720a { |
| 328 |
phy_int: phy-int { |
| 329 |
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; |
| 330 |
}; |
| 331 |
}; |
| 332 |
|
| 333 |
ir-receiver { |
| 334 |
ir_recv_pin: ir-recv-pin { |
| 335 |
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 336 |
}; |
| 337 |
}; |
| 338 |
|
| 339 |
sd0 { |
| 340 |
sdmmc_pwr: sdmmc-pwr { |
| 341 |
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 342 |
}; |
| 343 |
}; |
| 344 |
|
| 345 |
usb { |
| 346 |
host_vbus_drv: host-vbus-drv { |
| 347 |
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 348 |
}; |
| 349 |
otg_vbus_drv: otg-vbus-drv { |
| 350 |
rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 351 |
}; |
| 352 |
}; |
| 353 |
}; |
| 354 |
|
| 355 |
&spdif { |
| 356 |
status = "okay"; |
| 357 |
}; |
| 358 |
|
| 359 |
&uart0 { |
| 360 |
status = "okay"; |
| 361 |
}; |
| 362 |
|
| 363 |
&uart1 { |
| 364 |
status = "okay"; |
| 365 |
}; |
| 366 |
|
| 367 |
&uart2 { |
| 368 |
status = "okay"; |
| 369 |
}; |
| 370 |
|
| 371 |
&uart3 { |
| 372 |
status = "okay"; |
| 373 |
}; |
| 374 |
|
| 375 |
&usbphy { |
| 376 |
status = "okay"; |
| 377 |
}; |
| 378 |
|
| 379 |
&usb_host { |
| 380 |
status = "okay"; |
| 381 |
}; |
| 382 |
|
| 383 |
&usb_otg { |
| 384 |
status = "okay"; |
| 385 |
}; |
| 386 |
|
| 387 |
&wdt { |
| 388 |
status = "okay"; |
| 389 |
}; |