| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
#include <dt-bindings/input/input.h> |
| 5 |
#include "rk3288-rock2-som.dtsi" |
| 6 |
|
| 7 |
/ { |
| 8 |
model = "Radxa Rock 2 Square"; |
| 9 |
compatible = "radxa,rock2-square", "rockchip,rk3288"; |
| 10 |
|
| 11 |
chosen { |
| 12 |
stdout-path = "serial2:115200n8"; |
| 13 |
}; |
| 14 |
|
| 15 |
adc-keys { |
| 16 |
compatible = "adc-keys"; |
| 17 |
io-channels = <&saradc 1>; |
| 18 |
io-channel-names = "buttons"; |
| 19 |
keyup-threshold-microvolt = <1800000>; |
| 20 |
|
| 21 |
button-recovery { |
| 22 |
label = "Recovery"; |
| 23 |
linux,code = <KEY_VENDOR>; |
| 24 |
press-threshold-microvolt = <0>; |
| 25 |
}; |
| 26 |
}; |
| 27 |
|
| 28 |
gpio-keys { |
| 29 |
compatible = "gpio-keys"; |
| 30 |
|
| 31 |
key-power { |
| 32 |
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; |
| 33 |
label = "GPIO Power"; |
| 34 |
linux,code = <KEY_POWER>; |
| 35 |
pinctrl-names = "default"; |
| 36 |
pinctrl-0 = <&pwr_key>; |
| 37 |
wakeup-source; |
| 38 |
}; |
| 39 |
}; |
| 40 |
|
| 41 |
gpio-leds { |
| 42 |
compatible = "gpio-leds"; |
| 43 |
|
| 44 |
heartbeat_led: led-0 { |
| 45 |
gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>; |
| 46 |
label = "rock2:green:state1"; |
| 47 |
linux,default-trigger = "heartbeat"; |
| 48 |
}; |
| 49 |
|
| 50 |
mmc_led: led-1 { |
| 51 |
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>; |
| 52 |
label = "rock2:blue:state2"; |
| 53 |
linux,default-trigger = "mmc0"; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
ir: ir-receiver { |
| 58 |
compatible = "gpio-ir-receiver"; |
| 59 |
gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>; |
| 60 |
pinctrl-names = "default"; |
| 61 |
pinctrl-0 = <&ir_int>; |
| 62 |
}; |
| 63 |
|
| 64 |
sound { |
| 65 |
compatible = "simple-audio-card"; |
| 66 |
simple-audio-card,name = "SPDIF"; |
| 67 |
simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */ |
| 68 |
cpu { sound-dai = <&spdif>; }; |
| 69 |
codec { sound-dai = <&spdif_out>; }; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
sata_pwr: regulator-sata-prw { |
| 74 |
compatible = "regulator-fixed"; |
| 75 |
enable-active-high; |
| 76 |
gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
| 77 |
pinctrl-names = "default"; |
| 78 |
pinctrl-0 = <&sata_pwr_en>; |
| 79 |
/* Always turn on the 5V sata power connector */ |
| 80 |
regulator-always-on; |
| 81 |
regulator-name = "sata_pwr"; |
| 82 |
}; |
| 83 |
|
| 84 |
spdif_out: spdif-out { |
| 85 |
compatible = "linux,spdif-dit"; |
| 86 |
#sound-dai-cells = <0>; |
| 87 |
}; |
| 88 |
|
| 89 |
sound-i2s { |
| 90 |
compatible = "rockchip,rk3288-hdmi-analog"; |
| 91 |
pinctrl-names = "default"; |
| 92 |
pinctrl-0 = <&phone_ctl>, <&hp_det>; |
| 93 |
rockchip,audio-codec = <&es8388>; |
| 94 |
rockchip,hp-det-gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>; |
| 95 |
rockchip,hp-en-gpios = <&gpio8 0 GPIO_ACTIVE_HIGH>; |
| 96 |
rockchip,i2s-controller = <&i2s>; |
| 97 |
rockchip,model = "I2S"; |
| 98 |
rockchip,routing = "Analog", "LOUT2", |
| 99 |
"Analog", "ROUT2"; |
| 100 |
}; |
| 101 |
|
| 102 |
sdio_pwrseq: sdio-pwrseq { |
| 103 |
compatible = "mmc-pwrseq-simple"; |
| 104 |
clocks = <&hym8563>; |
| 105 |
clock-names = "ext_clock"; |
| 106 |
pinctrl-names = "default"; |
| 107 |
pinctrl-0 = <&wifi_enable>; |
| 108 |
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; |
| 109 |
}; |
| 110 |
|
| 111 |
vcc_usb_host: regulator-vcc-host { |
| 112 |
compatible = "regulator-fixed"; |
| 113 |
enable-active-high; |
| 114 |
gpio = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>; |
| 115 |
pinctrl-names = "default"; |
| 116 |
pinctrl-0 = <&host_vbus_drv>; |
| 117 |
regulator-name = "vcc_host"; |
| 118 |
}; |
| 119 |
|
| 120 |
vcc_sd: regulator-sdmmc { |
| 121 |
compatible = "regulator-fixed"; |
| 122 |
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; |
| 123 |
pinctrl-names = "default"; |
| 124 |
pinctrl-0 = <&sdmmc_pwr>; |
| 125 |
regulator-name = "vcc_sd"; |
| 126 |
regulator-min-microvolt = <3300000>; |
| 127 |
regulator-max-microvolt = <3300000>; |
| 128 |
vin-supply = <&vcc_io>; |
| 129 |
}; |
| 130 |
}; |
| 131 |
|
| 132 |
&sdio0 { |
| 133 |
bus-width = <4>; |
| 134 |
cap-sd-highspeed; |
| 135 |
cap-sdio-irq; |
| 136 |
mmc-pwrseq = <&sdio_pwrseq>; |
| 137 |
non-removable; |
| 138 |
pinctrl-names = "default"; |
| 139 |
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>; |
| 140 |
vmmc-supply = <&vcc_io>; |
| 141 |
vqmmc-supply = <&vcc_18>; |
| 142 |
status = "okay"; |
| 143 |
}; |
| 144 |
|
| 145 |
&sdmmc { |
| 146 |
bus-width = <4>; |
| 147 |
cap-mmc-highspeed; |
| 148 |
cap-sd-highspeed; |
| 149 |
card-detect-delay = <200>; |
| 150 |
disable-wp; /* wp not hooked up */ |
| 151 |
pinctrl-names = "default"; |
| 152 |
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; |
| 153 |
vmmc-supply = <&vcc_sd>; |
| 154 |
vqmmc-supply = <&vccio_sd>; |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&gmac { |
| 159 |
status = "okay"; |
| 160 |
}; |
| 161 |
|
| 162 |
&hdmi { |
| 163 |
ddc-i2c-bus = <&i2c5>; |
| 164 |
status = "okay"; |
| 165 |
}; |
| 166 |
|
| 167 |
&i2c0 { |
| 168 |
hym8563: rtc@51 { |
| 169 |
compatible = "haoyu,hym8563"; |
| 170 |
reg = <0x51>; |
| 171 |
#clock-cells = <0>; |
| 172 |
clock-output-names = "xin32k"; |
| 173 |
interrupt-parent = <&gpio0>; |
| 174 |
interrupts = <RK_PA4 IRQ_TYPE_EDGE_FALLING>; |
| 175 |
pinctrl-names = "default"; |
| 176 |
pinctrl-0 = <&pmic_int>; |
| 177 |
|
| 178 |
}; |
| 179 |
}; |
| 180 |
|
| 181 |
&i2c2 { |
| 182 |
status = "okay"; |
| 183 |
|
| 184 |
es8388: es8388@10 { |
| 185 |
compatible = "everest,es8388", "everest,es8328"; |
| 186 |
reg = <0x10>; |
| 187 |
AVDD-supply = <&vccio_codec>; |
| 188 |
DVDD-supply = <&vccio_codec>; |
| 189 |
HPVDD-supply = <&vccio_codec>; |
| 190 |
PVDD-supply = <&vccio_codec>; |
| 191 |
clocks = <&cru SCLK_I2S0_OUT>; |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
&i2c5 { |
| 196 |
status = "okay"; |
| 197 |
}; |
| 198 |
|
| 199 |
&i2s { |
| 200 |
status = "okay"; |
| 201 |
}; |
| 202 |
|
| 203 |
&pinctrl { |
| 204 |
ir { |
| 205 |
ir_int: ir-int { |
| 206 |
rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; |
| 207 |
}; |
| 208 |
}; |
| 209 |
|
| 210 |
keys { |
| 211 |
pwr_key: pwr-key { |
| 212 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 213 |
}; |
| 214 |
}; |
| 215 |
|
| 216 |
pmic { |
| 217 |
pmic_int: pmic-int { |
| 218 |
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; |
| 219 |
}; |
| 220 |
}; |
| 221 |
|
| 222 |
headphone { |
| 223 |
hp_det: hp-det { |
| 224 |
rockchip,pins = <7 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; |
| 225 |
}; |
| 226 |
|
| 227 |
phone_ctl: phone-ctl { |
| 228 |
rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 229 |
}; |
| 230 |
}; |
| 231 |
|
| 232 |
usb { |
| 233 |
host_vbus_drv: host-vbus-drv { |
| 234 |
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
sata { |
| 239 |
sata_pwr_en: sata-pwr-en { |
| 240 |
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; |
| 241 |
}; |
| 242 |
}; |
| 243 |
|
| 244 |
sdmmc { |
| 245 |
sdmmc_pwr: sdmmc-pwr { |
| 246 |
rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 247 |
}; |
| 248 |
}; |
| 249 |
|
| 250 |
sdio { |
| 251 |
wifi_enable: wifi-enable { |
| 252 |
rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 253 |
}; |
| 254 |
}; |
| 255 |
}; |
| 256 |
|
| 257 |
&saradc { |
| 258 |
status = "okay"; |
| 259 |
}; |
| 260 |
|
| 261 |
&spdif { |
| 262 |
status = "okay"; |
| 263 |
}; |
| 264 |
|
| 265 |
&uart2 { |
| 266 |
status = "okay"; |
| 267 |
}; |
| 268 |
|
| 269 |
&usbphy { |
| 270 |
status = "okay"; |
| 271 |
}; |
| 272 |
|
| 273 |
&usbphy1 { |
| 274 |
vbus-supply = <&vcc_usb_host>; |
| 275 |
}; |
| 276 |
|
| 277 |
&usb_host0_ehci { |
| 278 |
status = "okay"; |
| 279 |
}; |
| 280 |
|
| 281 |
&usb_host1 { |
| 282 |
status = "okay"; |
| 283 |
}; |
| 284 |
|
| 285 |
&usb_otg { |
| 286 |
status = "okay"; |
| 287 |
}; |