| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
/* |
| 3 |
* Copyright (c) 2014, 2015 Andy Yan <[email protected]> |
| 4 |
*/ |
| 5 |
|
| 6 |
/dts-v1/; |
| 7 |
#include <dt-bindings/input/input.h> |
| 8 |
#include "rk3288.dtsi" |
| 9 |
|
| 10 |
/ { |
| 11 |
model = "PopMetal-RK3288"; |
| 12 |
compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; |
| 13 |
|
| 14 |
memory@0 { |
| 15 |
device_type = "memory"; |
| 16 |
reg = <0x0 0x0 0x0 0x80000000>; |
| 17 |
}; |
| 18 |
|
| 19 |
ext_gmac: external-gmac-clock { |
| 20 |
compatible = "fixed-clock"; |
| 21 |
clock-frequency = <125000000>; |
| 22 |
clock-output-names = "ext_gmac"; |
| 23 |
#clock-cells = <0>; |
| 24 |
}; |
| 25 |
|
| 26 |
gpio-keys { |
| 27 |
compatible = "gpio-keys"; |
| 28 |
autorepeat; |
| 29 |
|
| 30 |
pinctrl-names = "default"; |
| 31 |
pinctrl-0 = <&pwrbtn>; |
| 32 |
|
| 33 |
key-power { |
| 34 |
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; |
| 35 |
linux,code = <KEY_POWER>; |
| 36 |
label = "GPIO Key Power"; |
| 37 |
linux,input-type = <1>; |
| 38 |
wakeup-source; |
| 39 |
debounce-interval = <100>; |
| 40 |
}; |
| 41 |
}; |
| 42 |
|
| 43 |
ir: ir-receiver { |
| 44 |
compatible = "gpio-ir-receiver"; |
| 45 |
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; |
| 46 |
pinctrl-names = "default"; |
| 47 |
pinctrl-0 = <&ir_int>; |
| 48 |
}; |
| 49 |
|
| 50 |
vcc_flash: regulator-flash { |
| 51 |
compatible = "regulator-fixed"; |
| 52 |
regulator-name = "vcc_flash"; |
| 53 |
regulator-min-microvolt = <1800000>; |
| 54 |
regulator-max-microvolt = <1800000>; |
| 55 |
vin-supply = <&vcc_io>; |
| 56 |
}; |
| 57 |
|
| 58 |
vcc_sd: regulator-sdmmc { |
| 59 |
compatible = "regulator-fixed"; |
| 60 |
gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; |
| 61 |
pinctrl-names = "default"; |
| 62 |
pinctrl-0 = <&sdmmc_pwr>; |
| 63 |
regulator-name = "vcc_sd"; |
| 64 |
regulator-min-microvolt = <3300000>; |
| 65 |
regulator-max-microvolt = <3300000>; |
| 66 |
startup-delay-us = <100000>; |
| 67 |
vin-supply = <&vcc_io>; |
| 68 |
}; |
| 69 |
|
| 70 |
vcc_sys: regulator-vsys { |
| 71 |
compatible = "regulator-fixed"; |
| 72 |
regulator-name = "vcc_sys"; |
| 73 |
regulator-min-microvolt = <5000000>; |
| 74 |
regulator-max-microvolt = <5000000>; |
| 75 |
regulator-always-on; |
| 76 |
regulator-boot-on; |
| 77 |
}; |
| 78 |
|
| 79 |
/* |
| 80 |
* A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled |
| 81 |
* by the dvp_pwr pin. |
| 82 |
*/ |
| 83 |
vcc18_dvp: regulator-vcc18-dvp { |
| 84 |
compatible = "regulator-fixed"; |
| 85 |
regulator-name = "vcc18-dvp"; |
| 86 |
regulator-min-microvolt = <1800000>; |
| 87 |
regulator-max-microvolt = <1800000>; |
| 88 |
vin-supply = <&vcc28_dvp>; |
| 89 |
}; |
| 90 |
|
| 91 |
vcc28_dvp: regulator-vcc28-dvp { |
| 92 |
compatible = "regulator-fixed"; |
| 93 |
enable-active-high; |
| 94 |
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; |
| 95 |
pinctrl-names = "default"; |
| 96 |
pinctrl-0 = <&dvp_pwr>; |
| 97 |
regulator-name = "vcc28_dvp"; |
| 98 |
regulator-min-microvolt = <2800000>; |
| 99 |
regulator-max-microvolt = <2800000>; |
| 100 |
regulator-always-on; |
| 101 |
vin-supply = <&vcc_io>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
&cpu0 { |
| 106 |
cpu-supply = <&vdd_cpu>; |
| 107 |
}; |
| 108 |
|
| 109 |
&cpu1 { |
| 110 |
cpu-supply = <&vdd_cpu>; |
| 111 |
}; |
| 112 |
|
| 113 |
&cpu2 { |
| 114 |
cpu-supply = <&vdd_cpu>; |
| 115 |
}; |
| 116 |
|
| 117 |
&cpu3 { |
| 118 |
cpu-supply = <&vdd_cpu>; |
| 119 |
}; |
| 120 |
|
| 121 |
&emmc { |
| 122 |
bus-width = <8>; |
| 123 |
cap-mmc-highspeed; |
| 124 |
mmc-ddr-1_8v; |
| 125 |
mmc-hs200-1_8v; |
| 126 |
non-removable; |
| 127 |
pinctrl-names = "default"; |
| 128 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; |
| 129 |
vmmc-supply = <&vcc_io>; |
| 130 |
vqmmc-supply = <&vcc_flash>; |
| 131 |
status = "okay"; |
| 132 |
}; |
| 133 |
|
| 134 |
&sdmmc { |
| 135 |
bus-width = <4>; |
| 136 |
cap-mmc-highspeed; |
| 137 |
cap-sd-highspeed; |
| 138 |
card-detect-delay = <200>; |
| 139 |
disable-wp; /* wp not hooked up */ |
| 140 |
pinctrl-names = "default"; |
| 141 |
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; |
| 142 |
sd-uhs-sdr12; |
| 143 |
sd-uhs-sdr25; |
| 144 |
sd-uhs-sdr50; |
| 145 |
sd-uhs-sdr104; |
| 146 |
vmmc-supply = <&vcc_sd>; |
| 147 |
vqmmc-supply = <&vccio_sd>; |
| 148 |
status = "okay"; |
| 149 |
}; |
| 150 |
|
| 151 |
&gmac { |
| 152 |
phy-supply = <&vcc_lan>; |
| 153 |
phy-mode = "rgmii"; |
| 154 |
clock_in_out = "input"; |
| 155 |
snps,reset-gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>; |
| 156 |
snps,reset-active-low; |
| 157 |
snps,reset-delays-us = <0 10000 1000000>; |
| 158 |
assigned-clocks = <&cru SCLK_MAC>; |
| 159 |
assigned-clock-parents = <&ext_gmac>; |
| 160 |
pinctrl-names = "default"; |
| 161 |
pinctrl-0 = <&rgmii_pins>; |
| 162 |
tx_delay = <0x30>; |
| 163 |
rx_delay = <0x10>; |
| 164 |
status = "okay"; |
| 165 |
}; |
| 166 |
|
| 167 |
&hdmi { |
| 168 |
ddc-i2c-bus = <&i2c5>; |
| 169 |
status = "okay"; |
| 170 |
}; |
| 171 |
|
| 172 |
&i2c0 { |
| 173 |
status = "okay"; |
| 174 |
clock-frequency = <400000>; |
| 175 |
|
| 176 |
rk808: pmic@1b { |
| 177 |
compatible = "rockchip,rk808"; |
| 178 |
reg = <0x1b>; |
| 179 |
interrupt-parent = <&gpio0>; |
| 180 |
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; |
| 181 |
pinctrl-names = "default"; |
| 182 |
pinctrl-0 = <&pmic_int &global_pwroff>; |
| 183 |
rockchip,system-power-controller; |
| 184 |
wakeup-source; |
| 185 |
#clock-cells = <1>; |
| 186 |
clock-output-names = "xin32k", "rk808-clkout2"; |
| 187 |
|
| 188 |
vcc1-supply = <&vcc_sys>; |
| 189 |
vcc2-supply = <&vcc_sys>; |
| 190 |
vcc3-supply = <&vcc_sys>; |
| 191 |
vcc4-supply = <&vcc_sys>; |
| 192 |
vcc6-supply = <&vcc_sys>; |
| 193 |
vcc7-supply = <&vcc_sys>; |
| 194 |
vcc8-supply = <&vcc_18>; |
| 195 |
vcc9-supply = <&vcc_io>; |
| 196 |
vcc10-supply = <&vcc_io>; |
| 197 |
vcc11-supply = <&vcc_sys>; |
| 198 |
vcc12-supply = <&vcc_io>; |
| 199 |
vddio-supply = <&vcc_io>; |
| 200 |
|
| 201 |
regulators { |
| 202 |
vdd_cpu: DCDC_REG1 { |
| 203 |
regulator-always-on; |
| 204 |
regulator-boot-on; |
| 205 |
regulator-min-microvolt = <750000>; |
| 206 |
regulator-max-microvolt = <1350000>; |
| 207 |
regulator-name = "vdd_arm"; |
| 208 |
regulator-state-mem { |
| 209 |
regulator-off-in-suspend; |
| 210 |
}; |
| 211 |
}; |
| 212 |
|
| 213 |
vdd_gpu: DCDC_REG2 { |
| 214 |
regulator-always-on; |
| 215 |
regulator-boot-on; |
| 216 |
regulator-min-microvolt = <850000>; |
| 217 |
regulator-max-microvolt = <1250000>; |
| 218 |
regulator-name = "vdd_gpu"; |
| 219 |
regulator-state-mem { |
| 220 |
regulator-on-in-suspend; |
| 221 |
regulator-suspend-microvolt = <1000000>; |
| 222 |
}; |
| 223 |
}; |
| 224 |
|
| 225 |
vcc_ddr: DCDC_REG3 { |
| 226 |
regulator-always-on; |
| 227 |
regulator-boot-on; |
| 228 |
regulator-name = "vcc_ddr"; |
| 229 |
regulator-state-mem { |
| 230 |
regulator-on-in-suspend; |
| 231 |
}; |
| 232 |
}; |
| 233 |
|
| 234 |
vcc_io: DCDC_REG4 { |
| 235 |
regulator-always-on; |
| 236 |
regulator-boot-on; |
| 237 |
regulator-min-microvolt = <3300000>; |
| 238 |
regulator-max-microvolt = <3300000>; |
| 239 |
regulator-name = "vcc_io"; |
| 240 |
regulator-state-mem { |
| 241 |
regulator-on-in-suspend; |
| 242 |
regulator-suspend-microvolt = <3300000>; |
| 243 |
}; |
| 244 |
}; |
| 245 |
|
| 246 |
vcc_lan: LDO_REG1 { |
| 247 |
regulator-always-on; |
| 248 |
regulator-boot-on; |
| 249 |
regulator-min-microvolt = <3300000>; |
| 250 |
regulator-max-microvolt = <3300000>; |
| 251 |
regulator-name = "vcc_lan"; |
| 252 |
regulator-state-mem { |
| 253 |
regulator-on-in-suspend; |
| 254 |
regulator-suspend-microvolt = <3300000>; |
| 255 |
}; |
| 256 |
}; |
| 257 |
|
| 258 |
vccio_sd: LDO_REG2 { |
| 259 |
regulator-always-on; |
| 260 |
regulator-boot-on; |
| 261 |
regulator-min-microvolt = <1800000>; |
| 262 |
regulator-max-microvolt = <3300000>; |
| 263 |
regulator-name = "vccio_sd"; |
| 264 |
regulator-state-mem { |
| 265 |
regulator-off-in-suspend; |
| 266 |
}; |
| 267 |
}; |
| 268 |
|
| 269 |
vdd_10: LDO_REG3 { |
| 270 |
regulator-always-on; |
| 271 |
regulator-boot-on; |
| 272 |
regulator-min-microvolt = <1000000>; |
| 273 |
regulator-max-microvolt = <1000000>; |
| 274 |
regulator-name = "vdd_10"; |
| 275 |
regulator-state-mem { |
| 276 |
regulator-on-in-suspend; |
| 277 |
regulator-suspend-microvolt = <1000000>; |
| 278 |
}; |
| 279 |
}; |
| 280 |
|
| 281 |
vcc18_lcd: LDO_REG4 { |
| 282 |
regulator-always-on; |
| 283 |
regulator-boot-on; |
| 284 |
regulator-min-microvolt = <1800000>; |
| 285 |
regulator-max-microvolt = <1800000>; |
| 286 |
regulator-name = "vcc18_lcd"; |
| 287 |
regulator-state-mem { |
| 288 |
regulator-on-in-suspend; |
| 289 |
regulator-suspend-microvolt = <1800000>; |
| 290 |
}; |
| 291 |
}; |
| 292 |
|
| 293 |
ldo5: LDO_REG5 { |
| 294 |
regulator-always-on; |
| 295 |
regulator-min-microvolt = <1800000>; |
| 296 |
regulator-max-microvolt = <3300000>; |
| 297 |
regulator-name = "ldo5"; |
| 298 |
}; |
| 299 |
|
| 300 |
vdd10_lcd: LDO_REG6 { |
| 301 |
regulator-always-on; |
| 302 |
regulator-boot-on; |
| 303 |
regulator-min-microvolt = <1000000>; |
| 304 |
regulator-max-microvolt = <1000000>; |
| 305 |
regulator-name = "vdd10_lcd"; |
| 306 |
regulator-state-mem { |
| 307 |
regulator-on-in-suspend; |
| 308 |
regulator-suspend-microvolt = <1000000>; |
| 309 |
}; |
| 310 |
}; |
| 311 |
|
| 312 |
vcc_18: LDO_REG7 { |
| 313 |
regulator-always-on; |
| 314 |
regulator-boot-on; |
| 315 |
regulator-min-microvolt = <1800000>; |
| 316 |
regulator-max-microvolt = <1800000>; |
| 317 |
regulator-name = "vcc_18"; |
| 318 |
regulator-state-mem { |
| 319 |
regulator-on-in-suspend; |
| 320 |
regulator-suspend-microvolt = <1800000>; |
| 321 |
}; |
| 322 |
}; |
| 323 |
|
| 324 |
vcca_33: LDO_REG8 { |
| 325 |
regulator-always-on; |
| 326 |
regulator-boot-on; |
| 327 |
regulator-min-microvolt = <3300000>; |
| 328 |
regulator-max-microvolt = <3300000>; |
| 329 |
regulator-name = "vcca_33"; |
| 330 |
regulator-state-mem { |
| 331 |
regulator-on-in-suspend; |
| 332 |
regulator-suspend-microvolt = <3300000>; |
| 333 |
}; |
| 334 |
}; |
| 335 |
|
| 336 |
vccio_wl: SWITCH_REG1 { |
| 337 |
regulator-always-on; |
| 338 |
regulator-boot-on; |
| 339 |
regulator-name = "vccio_wl"; |
| 340 |
regulator-state-mem { |
| 341 |
regulator-on-in-suspend; |
| 342 |
}; |
| 343 |
}; |
| 344 |
|
| 345 |
vcc_lcd: SWITCH_REG2 { |
| 346 |
regulator-always-on; |
| 347 |
regulator-boot-on; |
| 348 |
regulator-name = "vcc_lcd"; |
| 349 |
regulator-state-mem { |
| 350 |
regulator-on-in-suspend; |
| 351 |
}; |
| 352 |
}; |
| 353 |
}; |
| 354 |
}; |
| 355 |
}; |
| 356 |
|
| 357 |
&i2c1 { |
| 358 |
status = "okay"; |
| 359 |
clock-frequency = <400000>; |
| 360 |
|
| 361 |
ak8963: ak8963@d { |
| 362 |
compatible = "asahi-kasei,ak8975"; |
| 363 |
reg = <0x0d>; |
| 364 |
interrupt-parent = <&gpio8>; |
| 365 |
interrupts = <RK_PA1 IRQ_TYPE_EDGE_RISING>; |
| 366 |
pinctrl-names = "default"; |
| 367 |
pinctrl-0 = <&comp_int>; |
| 368 |
vdd-supply = <&vcc_io>; |
| 369 |
vid-supply = <&vcc_io>; |
| 370 |
}; |
| 371 |
|
| 372 |
l3g4200d: l3g4200d@69 { |
| 373 |
compatible = "st,l3g4200d-gyro"; |
| 374 |
st,drdy-int-pin = <2>; |
| 375 |
reg = <0x69>; |
| 376 |
vdd-supply = <&vcc_io>; |
| 377 |
vddio-supply = <&vcc_io>; |
| 378 |
}; |
| 379 |
|
| 380 |
mma8452: mma8452@1d { |
| 381 |
compatible = "fsl,mma8452"; |
| 382 |
reg = <0x1d>; |
| 383 |
interrupt-parent = <&gpio8>; |
| 384 |
interrupts = <RK_PA0 IRQ_TYPE_EDGE_RISING>; |
| 385 |
pinctrl-names = "default"; |
| 386 |
pinctrl-0 = <&gsensor_int>; |
| 387 |
}; |
| 388 |
}; |
| 389 |
|
| 390 |
&i2c2 { |
| 391 |
status = "okay"; |
| 392 |
}; |
| 393 |
|
| 394 |
&i2c3 { |
| 395 |
status = "okay"; |
| 396 |
}; |
| 397 |
|
| 398 |
&i2c4 { |
| 399 |
status = "okay"; |
| 400 |
}; |
| 401 |
|
| 402 |
&i2c5 { |
| 403 |
status = "okay"; |
| 404 |
}; |
| 405 |
|
| 406 |
&io_domains { |
| 407 |
status = "okay"; |
| 408 |
|
| 409 |
audio-supply = <&vcca_33>; |
| 410 |
bb-supply = <&vcc_io>; |
| 411 |
dvp-supply = <&vcc18_dvp>; |
| 412 |
flash0-supply = <&vcc_flash>; |
| 413 |
flash1-supply = <&vcc_lan>; |
| 414 |
gpio30-supply = <&vcc_io>; |
| 415 |
gpio1830-supply = <&vcc_io>; |
| 416 |
lcdc-supply = <&vcc_io>; |
| 417 |
sdcard-supply = <&vccio_sd>; |
| 418 |
wifi-supply = <&vccio_wl>; |
| 419 |
}; |
| 420 |
|
| 421 |
&pinctrl { |
| 422 |
ak8963 { |
| 423 |
comp_int: comp-int { |
| 424 |
rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; |
| 425 |
}; |
| 426 |
}; |
| 427 |
|
| 428 |
buttons { |
| 429 |
pwrbtn: pwrbtn { |
| 430 |
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 431 |
}; |
| 432 |
}; |
| 433 |
|
| 434 |
dvp { |
| 435 |
dvp_pwr: dvp-pwr { |
| 436 |
rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; |
| 437 |
}; |
| 438 |
}; |
| 439 |
|
| 440 |
ir { |
| 441 |
ir_int: ir-int { |
| 442 |
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; |
| 443 |
}; |
| 444 |
}; |
| 445 |
|
| 446 |
mma8452 { |
| 447 |
gsensor_int: gsensor-int { |
| 448 |
rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; |
| 449 |
}; |
| 450 |
}; |
| 451 |
|
| 452 |
pmic { |
| 453 |
pmic_int: pmic-int { |
| 454 |
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; |
| 455 |
}; |
| 456 |
}; |
| 457 |
|
| 458 |
sdmmc { |
| 459 |
sdmmc_pwr: sdmmc-pwr { |
| 460 |
rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 461 |
}; |
| 462 |
}; |
| 463 |
}; |
| 464 |
|
| 465 |
&tsadc { |
| 466 |
rockchip,hw-tshut-mode = <0>; |
| 467 |
rockchip,hw-tshut-polarity = <0>; |
| 468 |
status = "okay"; |
| 469 |
}; |
| 470 |
|
| 471 |
&vopb { |
| 472 |
status = "okay"; |
| 473 |
}; |
| 474 |
|
| 475 |
&vopb_mmu { |
| 476 |
status = "okay"; |
| 477 |
}; |
| 478 |
|
| 479 |
&vopl { |
| 480 |
status = "okay"; |
| 481 |
}; |
| 482 |
|
| 483 |
&vopl_mmu { |
| 484 |
status = "okay"; |
| 485 |
}; |
| 486 |
|
| 487 |
&uart0 { |
| 488 |
status = "okay"; |
| 489 |
}; |
| 490 |
|
| 491 |
&uart1 { |
| 492 |
status = "okay"; |
| 493 |
}; |
| 494 |
|
| 495 |
&uart2 { |
| 496 |
status = "okay"; |
| 497 |
}; |
| 498 |
|
| 499 |
&uart3 { |
| 500 |
status = "okay"; |
| 501 |
}; |
| 502 |
|
| 503 |
&uart4 { |
| 504 |
status = "okay"; |
| 505 |
}; |
| 506 |
|
| 507 |
&usbphy { |
| 508 |
status = "okay"; |
| 509 |
}; |
| 510 |
|
| 511 |
&usb_otg { |
| 512 |
status = "okay"; |
| 513 |
}; |