| 1 |
// SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
|
| 5 |
#include <dt-bindings/input/input.h> |
| 6 |
#include <dt-bindings/leds/common.h> |
| 7 |
#include "rk3128.dtsi" |
| 8 |
|
| 9 |
/ { |
| 10 |
model = "Geniatech XPI-3128"; |
| 11 |
compatible = "geniatech,xpi-3128", "rockchip,rk3128"; |
| 12 |
|
| 13 |
aliases { |
| 14 |
ethernet0 = &gmac; |
| 15 |
mmc0 = &emmc; |
| 16 |
mmc1 = &sdmmc; |
| 17 |
}; |
| 18 |
|
| 19 |
memory@60000000 { |
| 20 |
device_type = "memory"; |
| 21 |
reg = <0x60000000 0x40000000>; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen { |
| 25 |
stdout-path = &uart1; |
| 26 |
}; |
| 27 |
|
| 28 |
adc-keys { |
| 29 |
compatible = "adc-keys"; |
| 30 |
io-channels = <&saradc 1>; |
| 31 |
io-channel-names = "buttons"; |
| 32 |
keyup-threshold-microvolt = <3300000>; |
| 33 |
|
| 34 |
button-recovery { |
| 35 |
label = "Recovery"; |
| 36 |
linux,code = <KEY_VENDOR>; |
| 37 |
press-threshold-microvolt = <0>; |
| 38 |
}; |
| 39 |
}; |
| 40 |
|
| 41 |
dc_5v: regulator-dc-5v { |
| 42 |
compatible = "regulator-fixed"; |
| 43 |
regulator-name = "DC_5V"; |
| 44 |
regulator-min-microvolt = <5000000>; |
| 45 |
regulator-max-microvolt = <5000000>; |
| 46 |
regulator-always-on; |
| 47 |
regulator-boot-on; |
| 48 |
}; |
| 49 |
|
| 50 |
hdmi-connnector { |
| 51 |
compatible = "hdmi-connector"; |
| 52 |
type = "a"; |
| 53 |
|
| 54 |
port { |
| 55 |
hdmi_connector_in: endpoint { |
| 56 |
remote-endpoint = <&hdmi_connector_out>; |
| 57 |
}; |
| 58 |
}; |
| 59 |
}; |
| 60 |
|
| 61 |
/* |
| 62 |
* This is a vbus-supply, which also supplies the GL852G usb hub, |
| 63 |
* thus has to be always-on |
| 64 |
*/ |
| 65 |
host_pwr_5v: regulator-host-pwr-5v { |
| 66 |
compatible = "regulator-fixed"; |
| 67 |
gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; |
| 68 |
startup-delay-us = <1500>; |
| 69 |
regulator-name = "HOST_PWR_5V"; |
| 70 |
regulator-min-microvolt = <5000000>; |
| 71 |
regulator-max-microvolt = <5000000>; |
| 72 |
vin-supply = <&dc_5v>; |
| 73 |
pinctrl-names = "default"; |
| 74 |
pinctrl-0 = <&host_drv>; |
| 75 |
enable-active-high; |
| 76 |
regulator-always-on; |
| 77 |
}; |
| 78 |
|
| 79 |
ir-receiver { |
| 80 |
compatible = "gpio-ir-receiver"; |
| 81 |
gpios = <&gpio3 RK_PD2 GPIO_ACTIVE_LOW>; |
| 82 |
pinctrl-names = "default"; |
| 83 |
pinctrl-0 = <&ir_int>; |
| 84 |
}; |
| 85 |
|
| 86 |
leds { |
| 87 |
compatible = "gpio-leds"; |
| 88 |
|
| 89 |
led-power { |
| 90 |
gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>; |
| 91 |
function = LED_FUNCTION_POWER; |
| 92 |
color = <LED_COLOR_ID_BLUE>; |
| 93 |
default-state = "on"; |
| 94 |
pinctrl-names = "default"; |
| 95 |
pinctrl-0 = <&power_led>; |
| 96 |
}; |
| 97 |
|
| 98 |
led-spd { |
| 99 |
gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; |
| 100 |
function = LED_FUNCTION_LAN; |
| 101 |
color = <LED_COLOR_ID_GREEN>; |
| 102 |
/* |
| 103 |
* currently not allowed to be set as per |
| 104 |
* https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/common.yaml |
| 105 |
* and needs to set in userspace: |
| 106 |
* |
| 107 |
* linux,default-trigger = "netdev"; |
| 108 |
*/ |
| 109 |
pinctrl-names = "default"; |
| 110 |
pinctrl-0 = <&spd_led>; |
| 111 |
}; |
| 112 |
}; |
| 113 |
|
| 114 |
mcu3v3: regulator-mcu3v3 { |
| 115 |
compatible = "regulator-fixed"; |
| 116 |
regulator-name = "MCU3V3"; |
| 117 |
regulator-min-microvolt = <3300000>; |
| 118 |
regulator-max-microvolt = <3300000>; |
| 119 |
vin-supply = <&vcc_io>; |
| 120 |
regulator-always-on; |
| 121 |
regulator-boot-on; |
| 122 |
}; |
| 123 |
|
| 124 |
vcc_ddr: regulator-vcc-ddr { |
| 125 |
compatible = "regulator-fixed"; |
| 126 |
regulator-name = "VCC_DDR"; |
| 127 |
regulator-min-microvolt = <1500000>; |
| 128 |
regulator-max-microvolt = <1500000>; |
| 129 |
vin-supply = <&vcc_sys>; |
| 130 |
regulator-always-on; |
| 131 |
regulator-boot-on; |
| 132 |
}; |
| 133 |
|
| 134 |
vcc_io: regulator-vcc-io { |
| 135 |
compatible = "regulator-fixed"; |
| 136 |
regulator-name = "VCC_IO"; |
| 137 |
regulator-min-microvolt = <3300000>; |
| 138 |
regulator-max-microvolt = <3300000>; |
| 139 |
vin-supply = <&vcc_sys>; |
| 140 |
regulator-always-on; |
| 141 |
regulator-boot-on; |
| 142 |
}; |
| 143 |
|
| 144 |
vcc_lan: regulator-vcc-lan { |
| 145 |
compatible = "regulator-fixed"; |
| 146 |
regulator-name = "VCC_LAN"; |
| 147 |
regulator-min-microvolt = <3300000>; |
| 148 |
regulator-max-microvolt = <3300000>; |
| 149 |
vin-supply = <&vcc_io>; |
| 150 |
regulator-always-on; |
| 151 |
regulator-boot-on; |
| 152 |
}; |
| 153 |
|
| 154 |
vcc_sd: regulator-vcc-sd { |
| 155 |
compatible = "regulator-fixed"; |
| 156 |
gpio = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; |
| 157 |
startup-delay-us = <500>; |
| 158 |
regulator-name = "VCC_SD"; |
| 159 |
regulator-min-microvolt = <3300000>; |
| 160 |
regulator-max-microvolt = <3300000>; |
| 161 |
vin-supply = <&vcc_io>; |
| 162 |
pinctrl-names = "default"; |
| 163 |
pinctrl-0 = <&sdmmc_pwren>; |
| 164 |
}; |
| 165 |
|
| 166 |
vcc_sys: regulator-vcc-sys { |
| 167 |
compatible = "regulator-fixed"; |
| 168 |
regulator-name = "VCC_SYS"; |
| 169 |
regulator-min-microvolt = <5000000>; |
| 170 |
regulator-max-microvolt = <5000000>; |
| 171 |
vin-supply = <&dc_5v>; |
| 172 |
regulator-always-on; |
| 173 |
regulator-boot-on; |
| 174 |
}; |
| 175 |
|
| 176 |
vcc33_hdmi: regulator-vcc33-hdmi { |
| 177 |
compatible = "regulator-fixed"; |
| 178 |
regulator-name = "VCC33_HDMI"; |
| 179 |
regulator-min-microvolt = <3300000>; |
| 180 |
regulator-max-microvolt = <3300000>; |
| 181 |
vin-supply = <&vcca_33>; |
| 182 |
regulator-always-on; |
| 183 |
regulator-boot-on; |
| 184 |
}; |
| 185 |
|
| 186 |
vcca_33: regulator-vcca-33 { |
| 187 |
compatible = "regulator-fixed"; |
| 188 |
regulator-name = "VCCA_33"; |
| 189 |
regulator-min-microvolt = <3300000>; |
| 190 |
regulator-max-microvolt = <3300000>; |
| 191 |
vin-supply = <&vcc_sys>; |
| 192 |
regulator-always-on; |
| 193 |
regulator-boot-on; |
| 194 |
}; |
| 195 |
|
| 196 |
vdd_11: regulator-vdd-11 { |
| 197 |
compatible = "regulator-fixed"; |
| 198 |
regulator-name = "VDD_11"; |
| 199 |
regulator-min-microvolt = <1100000>; |
| 200 |
regulator-max-microvolt = <1100000>; |
| 201 |
vin-supply = <&vcc_sys>; |
| 202 |
regulator-always-on; |
| 203 |
regulator-boot-on; |
| 204 |
}; |
| 205 |
|
| 206 |
vdd11_hdmi: regulator-vdd11-hdmi { |
| 207 |
compatible = "regulator-fixed"; |
| 208 |
regulator-name = "VDD11_HDMI"; |
| 209 |
regulator-min-microvolt = <1100000>; |
| 210 |
regulator-max-microvolt = <1100000>; |
| 211 |
vin-supply = <&vdd_11>; |
| 212 |
regulator-always-on; |
| 213 |
regulator-boot-on; |
| 214 |
}; |
| 215 |
|
| 216 |
vdd_arm: regulator-vdd-arm { |
| 217 |
compatible = "pwm-regulator"; |
| 218 |
regulator-name = "VDD_ARM"; |
| 219 |
pwms = <&pwm1 0 25000 1>; |
| 220 |
pwm-supply = <&vcc_sys>; |
| 221 |
regulator-min-microvolt = <900000>; |
| 222 |
regulator-max-microvolt = <1400000>; |
| 223 |
regulator-always-on; |
| 224 |
regulator-boot-on; |
| 225 |
}; |
| 226 |
|
| 227 |
/* |
| 228 |
* As per schematics vdd_log is minimum 900 mV, maximum 1400 mV. |
| 229 |
* Since there are HW blocks in PD_LOGIC (which are all driven by |
| 230 |
* this supply), that either do not have a driver at all or the |
| 231 |
* driver does not implement regulator support we have to make |
| 232 |
* sure here that the voltage never drops below 1050 mV. |
| 233 |
*/ |
| 234 |
vdd_log: regulator-vdd-log { |
| 235 |
compatible = "pwm-regulator"; |
| 236 |
regulator-name = "VDD_LOG"; |
| 237 |
pwms = <&pwm2 0 25000 1>; |
| 238 |
pwm-dutycycle-range = <30 100>; |
| 239 |
pwm-supply = <&vcc_sys>; |
| 240 |
regulator-min-microvolt = <1050000>; |
| 241 |
regulator-max-microvolt = <1400000>; |
| 242 |
regulator-ramp-delay = <4000>; |
| 243 |
regulator-always-on; |
| 244 |
regulator-boot-on; |
| 245 |
}; |
| 246 |
|
| 247 |
}; |
| 248 |
|
| 249 |
&cpu0 { |
| 250 |
cpu-supply = <&vdd_arm>; |
| 251 |
}; |
| 252 |
|
| 253 |
&display_subsystem { |
| 254 |
status = "okay"; |
| 255 |
}; |
| 256 |
|
| 257 |
&emmc { |
| 258 |
bus-width = <8>; |
| 259 |
vmmc-supply = <&vcc_io>; |
| 260 |
pinctrl-names = "default"; |
| 261 |
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; |
| 262 |
cap-mmc-highspeed; |
| 263 |
mmc-ddr-3_3v; |
| 264 |
no-sd; |
| 265 |
no-sdio; |
| 266 |
status = "okay"; |
| 267 |
}; |
| 268 |
|
| 269 |
&gmac { |
| 270 |
clock_in_out = "output"; |
| 271 |
phy-supply = <&vcc_lan>; |
| 272 |
phy-mode = "rmii"; |
| 273 |
phy-handle = <&phy0>; |
| 274 |
assigned-clocks = <&cru SCLK_MAC_SRC>; |
| 275 |
assigned-clock-rates = <50000000>; |
| 276 |
pinctrl-names = "default"; |
| 277 |
pinctrl-0 = <&rmii_pins>; |
| 278 |
status = "okay"; |
| 279 |
}; |
| 280 |
|
| 281 |
&gpio0 { |
| 282 |
gpio-line-names = /* GPIO0 A0-A7 */ |
| 283 |
"", "", "HEADER_5", "HEADER_3", |
| 284 |
"", "", "", "", |
| 285 |
/* GPIO0 B0-B7 */ |
| 286 |
"HEADER_22", "HEADER_23", "", "HEADER_19", |
| 287 |
"HEADER_26", "HEADER_21", "HEADER_24", "", |
| 288 |
/* GPIO0 C0-C7 */ |
| 289 |
"", "HEADER_18", "", "", |
| 290 |
"", "", "", "", |
| 291 |
/* GPIO0 D0-D7 */ |
| 292 |
"HEADER_36", "", "", "", |
| 293 |
"", "", "HEADER_13", ""; |
| 294 |
}; |
| 295 |
|
| 296 |
&gpio1 { |
| 297 |
gpio-line-names = /* GPIO1 A0-A7 */ |
| 298 |
"HEADER_7", "HEADER_35", "HEADER_33", "HEADER_37", |
| 299 |
"HEADER_40", "HEADER_38", "", "", |
| 300 |
/* GPIO1 B0-B7 */ |
| 301 |
"HEADER_11", "", "", "HEADER_29", |
| 302 |
"HEADER_31", "", "", "", |
| 303 |
/* GPIO1 C0-C7 */ |
| 304 |
"", "", "", "", |
| 305 |
"", "", "", "", |
| 306 |
/* GPIO1 D0-D7 */ |
| 307 |
"", "", "", "", |
| 308 |
"", "", "", ""; |
| 309 |
}; |
| 310 |
|
| 311 |
&gpio2 { |
| 312 |
gpio-line-names = /* GPIO2 A0-A7 */ |
| 313 |
"", "", "", "", |
| 314 |
"", "", "", "", |
| 315 |
/* GPIO2 B0-B7 */ |
| 316 |
"", "", "", "", |
| 317 |
"", "", "", "", |
| 318 |
/* GPIO2 C0-C7 */ |
| 319 |
"", "", "", "", |
| 320 |
"HEADER_27", "", "", "", |
| 321 |
/* GPIO2 D0-D7 */ |
| 322 |
"", "", "HEADER_8", "HEADER_10", |
| 323 |
"", "", "", ""; |
| 324 |
}; |
| 325 |
|
| 326 |
&gpio3 { |
| 327 |
gpio-line-names = /* GPIO3 A0-A7 */ |
| 328 |
"", "", "", "", |
| 329 |
"", "", "", "", |
| 330 |
/* GPIO3 B0-B7 */ |
| 331 |
"", "", "", "", |
| 332 |
"", "", "", "", |
| 333 |
/* GPIO3 C0-C7 */ |
| 334 |
"", "HEADER_32", "", "", |
| 335 |
"", "", "", "HEADER_12", |
| 336 |
/* GPIO3 D0-D7 */ |
| 337 |
"", "", "", "HEADER_15", |
| 338 |
"", "", "", ""; |
| 339 |
}; |
| 340 |
|
| 341 |
&gpu { |
| 342 |
mali-supply = <&vdd_log>; |
| 343 |
status = "okay"; |
| 344 |
}; |
| 345 |
|
| 346 |
&hdmi { |
| 347 |
status = "okay"; |
| 348 |
}; |
| 349 |
|
| 350 |
&hdmi_out { |
| 351 |
hdmi_connector_out: endpoint { |
| 352 |
remote-endpoint = <&hdmi_connector_in>; |
| 353 |
}; |
| 354 |
}; |
| 355 |
|
| 356 |
&mdio { |
| 357 |
phy0: ethernet-phy@1 { |
| 358 |
compatible = "ethernet-phy-ieee802.3-c22"; |
| 359 |
reg = <1>; |
| 360 |
max-speed = <100>; |
| 361 |
/* T2.2.4 min. 1 us */ |
| 362 |
reset-assert-us = <10>; |
| 363 |
/* T2.2.1 + T2.2.2 + T2.2.3 min. 6.05 us */ |
| 364 |
reset-deassert-us = <20>; |
| 365 |
reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_LOW>; |
| 366 |
pinctrl-names = "default"; |
| 367 |
pinctrl-0 = <&dp83848c_rst>; |
| 368 |
}; |
| 369 |
}; |
| 370 |
|
| 371 |
&pinctrl { |
| 372 |
dp83848c { |
| 373 |
dp83848c_rst: dp83848c-rst { |
| 374 |
rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; |
| 375 |
}; |
| 376 |
}; |
| 377 |
|
| 378 |
ir-receiver { |
| 379 |
ir_int: ir-int { |
| 380 |
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 381 |
}; |
| 382 |
}; |
| 383 |
|
| 384 |
leds { |
| 385 |
power_led: power-led { |
| 386 |
rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 387 |
}; |
| 388 |
|
| 389 |
spd_led: spd-led { |
| 390 |
rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; |
| 391 |
}; |
| 392 |
}; |
| 393 |
|
| 394 |
usb2 { |
| 395 |
host_drv: host-drv { |
| 396 |
rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; |
| 397 |
}; |
| 398 |
}; |
| 399 |
}; |
| 400 |
|
| 401 |
&pwm1 { |
| 402 |
status = "okay"; |
| 403 |
}; |
| 404 |
|
| 405 |
&pwm2 { |
| 406 |
status = "okay"; |
| 407 |
}; |
| 408 |
|
| 409 |
&saradc { |
| 410 |
vref-supply = <&vcc_io>; |
| 411 |
status = "okay"; |
| 412 |
}; |
| 413 |
|
| 414 |
&sdmmc { |
| 415 |
bus-width = <4>; |
| 416 |
vmmc-supply = <&vcc_sd>; |
| 417 |
pinctrl-names = "default"; |
| 418 |
pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc_det>; |
| 419 |
disable-wp; |
| 420 |
cap-sd-highspeed; |
| 421 |
no-mmc; |
| 422 |
no-sdio; |
| 423 |
status = "okay"; |
| 424 |
}; |
| 425 |
|
| 426 |
&uart1 { |
| 427 |
status = "okay"; |
| 428 |
}; |
| 429 |
|
| 430 |
&usb_host_ehci { |
| 431 |
status = "okay"; |
| 432 |
}; |
| 433 |
|
| 434 |
&usb_otg { |
| 435 |
vusb_a-supply = <&vcc_io>; |
| 436 |
vusb_d-supply = <&vdd_11>; |
| 437 |
status = "okay"; |
| 438 |
}; |
| 439 |
|
| 440 |
&usb2phy { |
| 441 |
status = "okay"; |
| 442 |
}; |
| 443 |
|
| 444 |
&usb2phy_host { |
| 445 |
status = "okay"; |
| 446 |
}; |
| 447 |
|
| 448 |
&usb2phy_otg { |
| 449 |
status = "okay"; |
| 450 |
}; |
| 451 |
|
| 452 |
&vop { |
| 453 |
status = "okay"; |
| 454 |
}; |