| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung's S5PV210 SoC device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. |
| 6 |
* |
| 7 |
* Mateusz Krawczuk <[email protected]> |
| 8 |
* Tomasz Figa <[email protected]> |
| 9 |
* |
| 10 |
* Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 |
| 11 |
* based board files can include this file and provide values for board specific |
| 12 |
* bindings. |
| 13 |
* |
| 14 |
* Note: This file does not include device nodes for all the controllers in |
| 15 |
* S5PV210 SoC. As device tree coverage for S5PV210 increases, additional |
| 16 |
* nodes can be added to this file. |
| 17 |
*/ |
| 18 |
|
| 19 |
#include <dt-bindings/clock/s5pv210.h> |
| 20 |
#include <dt-bindings/clock/s5pv210-audss.h> |
| 21 |
|
| 22 |
/ { |
| 23 |
#address-cells = <1>; |
| 24 |
#size-cells = <1>; |
| 25 |
|
| 26 |
aliases { |
| 27 |
csis0 = &csis0; |
| 28 |
dmc0 = &dmc0; |
| 29 |
dmc1 = &dmc1; |
| 30 |
fimc0 = &fimc0; |
| 31 |
fimc1 = &fimc1; |
| 32 |
fimc2 = &fimc2; |
| 33 |
i2c0 = &i2c0; |
| 34 |
i2c1 = &i2c1; |
| 35 |
i2c2 = &i2c2; |
| 36 |
i2s0 = &i2s0; |
| 37 |
i2s1 = &i2s1; |
| 38 |
i2s2 = &i2s2; |
| 39 |
pinctrl0 = &pinctrl0; |
| 40 |
spi0 = &spi0; |
| 41 |
spi1 = &spi1; |
| 42 |
}; |
| 43 |
|
| 44 |
cpus { |
| 45 |
#address-cells = <1>; |
| 46 |
#size-cells = <0>; |
| 47 |
|
| 48 |
cpu@0 { |
| 49 |
device_type = "cpu"; |
| 50 |
compatible = "arm,cortex-a8"; |
| 51 |
reg = <0>; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
xxti: oscillator-0 { |
| 56 |
compatible = "fixed-clock"; |
| 57 |
clock-frequency = <0>; |
| 58 |
clock-output-names = "xxti"; |
| 59 |
#clock-cells = <0>; |
| 60 |
}; |
| 61 |
|
| 62 |
xusbxti: oscillator-1 { |
| 63 |
compatible = "fixed-clock"; |
| 64 |
clock-frequency = <0>; |
| 65 |
clock-output-names = "xusbxti"; |
| 66 |
#clock-cells = <0>; |
| 67 |
}; |
| 68 |
|
| 69 |
soc { |
| 70 |
compatible = "simple-bus"; |
| 71 |
#address-cells = <1>; |
| 72 |
#size-cells = <1>; |
| 73 |
ranges; |
| 74 |
|
| 75 |
onenand: nand-controller@b0600000 { |
| 76 |
compatible = "samsung,s5pv210-onenand"; |
| 77 |
reg = <0xb0600000 0x2000>, |
| 78 |
<0xb0000000 0x20000>, |
| 79 |
<0xb0040000 0x20000>; |
| 80 |
interrupt-parent = <&vic1>; |
| 81 |
interrupts = <31>; |
| 82 |
clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>; |
| 83 |
clock-names = "bus", "onenand"; |
| 84 |
#address-cells = <1>; |
| 85 |
#size-cells = <0>; |
| 86 |
status = "disabled"; |
| 87 |
}; |
| 88 |
|
| 89 |
chipid@e0000000 { |
| 90 |
compatible = "samsung,s5pv210-chipid"; |
| 91 |
reg = <0xe0000000 0x1000>; |
| 92 |
}; |
| 93 |
|
| 94 |
clocks: clock-controller@e0100000 { |
| 95 |
compatible = "samsung,s5pv210-clock"; |
| 96 |
reg = <0xe0100000 0x10000>; |
| 97 |
clock-names = "xxti", "xusbxti"; |
| 98 |
clocks = <&xxti>, <&xusbxti>; |
| 99 |
#clock-cells = <1>; |
| 100 |
}; |
| 101 |
|
| 102 |
pmu_syscon: syscon@e0108000 { |
| 103 |
compatible = "samsung-s5pv210-pmu", "syscon"; |
| 104 |
reg = <0xe0108000 0x8000>; |
| 105 |
}; |
| 106 |
|
| 107 |
pinctrl0: pinctrl@e0200000 { |
| 108 |
compatible = "samsung,s5pv210-pinctrl"; |
| 109 |
reg = <0xe0200000 0x1000>; |
| 110 |
interrupt-parent = <&vic0>; |
| 111 |
interrupts = <30>; |
| 112 |
|
| 113 |
wakeup-interrupt-controller { |
| 114 |
compatible = "samsung,s5pv210-wakeup-eint"; |
| 115 |
interrupts = <16>; |
| 116 |
interrupt-parent = <&vic0>; |
| 117 |
}; |
| 118 |
}; |
| 119 |
|
| 120 |
pdma0: dma-controller@e0900000 { |
| 121 |
compatible = "arm,pl330", "arm,primecell"; |
| 122 |
reg = <0xe0900000 0x1000>; |
| 123 |
interrupt-parent = <&vic0>; |
| 124 |
interrupts = <19>; |
| 125 |
clocks = <&clocks CLK_PDMA0>; |
| 126 |
clock-names = "apb_pclk"; |
| 127 |
#dma-cells = <1>; |
| 128 |
}; |
| 129 |
|
| 130 |
pdma1: dma-controller@e0a00000 { |
| 131 |
compatible = "arm,pl330", "arm,primecell"; |
| 132 |
reg = <0xe0a00000 0x1000>; |
| 133 |
interrupt-parent = <&vic0>; |
| 134 |
interrupts = <20>; |
| 135 |
clocks = <&clocks CLK_PDMA1>; |
| 136 |
clock-names = "apb_pclk"; |
| 137 |
#dma-cells = <1>; |
| 138 |
}; |
| 139 |
|
| 140 |
adc: adc@e1700000 { |
| 141 |
compatible = "samsung,s5pv210-adc"; |
| 142 |
reg = <0xe1700000 0x1000>; |
| 143 |
interrupt-parent = <&vic2>; |
| 144 |
interrupts = <23>, <24>; |
| 145 |
clocks = <&clocks CLK_TSADC>; |
| 146 |
clock-names = "adc"; |
| 147 |
#io-channel-cells = <1>; |
| 148 |
status = "disabled"; |
| 149 |
}; |
| 150 |
|
| 151 |
spi0: spi@e1300000 { |
| 152 |
compatible = "samsung,s5pv210-spi"; |
| 153 |
reg = <0xe1300000 0x1000>; |
| 154 |
interrupt-parent = <&vic1>; |
| 155 |
interrupts = <15>; |
| 156 |
dmas = <&pdma0 7>, <&pdma0 6>; |
| 157 |
dma-names = "tx", "rx"; |
| 158 |
clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>; |
| 159 |
clock-names = "spi", "spi_busclk0"; |
| 160 |
pinctrl-names = "default"; |
| 161 |
pinctrl-0 = <&spi0_bus>; |
| 162 |
#address-cells = <1>; |
| 163 |
#size-cells = <0>; |
| 164 |
fifo-depth = <256>; |
| 165 |
status = "disabled"; |
| 166 |
}; |
| 167 |
|
| 168 |
spi1: spi@e1400000 { |
| 169 |
compatible = "samsung,s5pv210-spi"; |
| 170 |
reg = <0xe1400000 0x1000>; |
| 171 |
interrupt-parent = <&vic1>; |
| 172 |
interrupts = <16>; |
| 173 |
dmas = <&pdma1 7>, <&pdma1 6>; |
| 174 |
dma-names = "tx", "rx"; |
| 175 |
clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>; |
| 176 |
clock-names = "spi", "spi_busclk0"; |
| 177 |
pinctrl-names = "default"; |
| 178 |
pinctrl-0 = <&spi1_bus>; |
| 179 |
#address-cells = <1>; |
| 180 |
#size-cells = <0>; |
| 181 |
fifo-depth = <64>; |
| 182 |
status = "disabled"; |
| 183 |
}; |
| 184 |
|
| 185 |
keypad: keypad@e1600000 { |
| 186 |
compatible = "samsung,s5pv210-keypad"; |
| 187 |
reg = <0xe1600000 0x1000>; |
| 188 |
interrupt-parent = <&vic2>; |
| 189 |
interrupts = <25>; |
| 190 |
clocks = <&clocks CLK_KEYIF>; |
| 191 |
clock-names = "keypad"; |
| 192 |
status = "disabled"; |
| 193 |
}; |
| 194 |
|
| 195 |
i2c0: i2c@e1800000 { |
| 196 |
compatible = "samsung,s3c2440-i2c"; |
| 197 |
reg = <0xe1800000 0x1000>; |
| 198 |
interrupt-parent = <&vic1>; |
| 199 |
interrupts = <14>; |
| 200 |
clocks = <&clocks CLK_I2C0>; |
| 201 |
clock-names = "i2c"; |
| 202 |
pinctrl-names = "default"; |
| 203 |
pinctrl-0 = <&i2c0_bus>; |
| 204 |
#address-cells = <1>; |
| 205 |
#size-cells = <0>; |
| 206 |
status = "disabled"; |
| 207 |
}; |
| 208 |
|
| 209 |
i2c2: i2c@e1a00000 { |
| 210 |
compatible = "samsung,s3c2440-i2c"; |
| 211 |
reg = <0xe1a00000 0x1000>; |
| 212 |
interrupt-parent = <&vic1>; |
| 213 |
interrupts = <19>; |
| 214 |
clocks = <&clocks CLK_I2C2>; |
| 215 |
clock-names = "i2c"; |
| 216 |
pinctrl-0 = <&i2c2_bus>; |
| 217 |
pinctrl-names = "default"; |
| 218 |
#address-cells = <1>; |
| 219 |
#size-cells = <0>; |
| 220 |
status = "disabled"; |
| 221 |
}; |
| 222 |
|
| 223 |
clk_audss: clock-controller@eee10000 { |
| 224 |
compatible = "samsung,s5pv210-audss-clock"; |
| 225 |
reg = <0xeee10000 0x1000>; |
| 226 |
clock-names = "hclk", "xxti", |
| 227 |
"fout_epll", |
| 228 |
"sclk_audio0"; |
| 229 |
clocks = <&clocks DOUT_HCLKP>, <&xxti>, |
| 230 |
<&clocks FOUT_EPLL>, |
| 231 |
<&clocks SCLK_AUDIO0>; |
| 232 |
#clock-cells = <1>; |
| 233 |
}; |
| 234 |
|
| 235 |
i2s0: i2s@eee30000 { |
| 236 |
compatible = "samsung,s5pv210-i2s"; |
| 237 |
reg = <0xeee30000 0x1000>; |
| 238 |
interrupt-parent = <&vic2>; |
| 239 |
interrupts = <16>; |
| 240 |
dma-names = "tx", "rx", "tx-sec"; |
| 241 |
dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 11>; |
| 242 |
clock-names = "iis", |
| 243 |
"i2s_opclk0", |
| 244 |
"i2s_opclk1"; |
| 245 |
clocks = <&clk_audss CLK_I2S>, |
| 246 |
<&clk_audss CLK_I2S>, |
| 247 |
<&clk_audss CLK_DOUT_AUD_BUS>; |
| 248 |
samsung,idma-addr = <0xc0010000>; |
| 249 |
pinctrl-names = "default"; |
| 250 |
pinctrl-0 = <&i2s0_bus>; |
| 251 |
#sound-dai-cells = <0>; |
| 252 |
status = "disabled"; |
| 253 |
}; |
| 254 |
|
| 255 |
i2s1: i2s@e2100000 { |
| 256 |
compatible = "samsung,s3c6410-i2s"; |
| 257 |
reg = <0xe2100000 0x1000>; |
| 258 |
interrupt-parent = <&vic2>; |
| 259 |
interrupts = <17>; |
| 260 |
dma-names = "tx", "rx"; |
| 261 |
dmas = <&pdma1 13>, <&pdma1 12>; |
| 262 |
clock-names = "iis", "i2s_opclk0"; |
| 263 |
clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; |
| 264 |
pinctrl-names = "default"; |
| 265 |
pinctrl-0 = <&i2s1_bus>; |
| 266 |
#sound-dai-cells = <0>; |
| 267 |
status = "disabled"; |
| 268 |
}; |
| 269 |
|
| 270 |
i2s2: i2s@e2a00000 { |
| 271 |
compatible = "samsung,s3c6410-i2s"; |
| 272 |
reg = <0xe2a00000 0x1000>; |
| 273 |
interrupt-parent = <&vic2>; |
| 274 |
interrupts = <18>; |
| 275 |
dma-names = "tx", "rx"; |
| 276 |
dmas = <&pdma1 15>, <&pdma1 14>; |
| 277 |
clock-names = "iis", "i2s_opclk0"; |
| 278 |
clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; |
| 279 |
pinctrl-names = "default"; |
| 280 |
pinctrl-0 = <&i2s2_bus>; |
| 281 |
#sound-dai-cells = <0>; |
| 282 |
status = "disabled"; |
| 283 |
}; |
| 284 |
|
| 285 |
pwm: pwm@e2500000 { |
| 286 |
compatible = "samsung,s5pc100-pwm"; |
| 287 |
reg = <0xe2500000 0x1000>; |
| 288 |
interrupt-parent = <&vic0>; |
| 289 |
interrupts = <21>, <22>, <23>, <24>, <25>; |
| 290 |
clock-names = "timers"; |
| 291 |
clocks = <&clocks CLK_PWM>; |
| 292 |
#pwm-cells = <3>; |
| 293 |
}; |
| 294 |
|
| 295 |
watchdog: watchdog@e2700000 { |
| 296 |
compatible = "samsung,s3c6410-wdt"; |
| 297 |
reg = <0xe2700000 0x1000>; |
| 298 |
interrupt-parent = <&vic0>; |
| 299 |
interrupts = <26>; |
| 300 |
clock-names = "watchdog"; |
| 301 |
clocks = <&clocks CLK_WDT>; |
| 302 |
}; |
| 303 |
|
| 304 |
rtc: rtc@e2800000 { |
| 305 |
compatible = "samsung,s3c6410-rtc"; |
| 306 |
reg = <0xe2800000 0x100>; |
| 307 |
interrupt-parent = <&vic0>; |
| 308 |
interrupts = <28>, <29>; |
| 309 |
clocks = <&clocks CLK_RTC>; |
| 310 |
clock-names = "rtc"; |
| 311 |
status = "disabled"; |
| 312 |
}; |
| 313 |
|
| 314 |
uart0: serial@e2900000 { |
| 315 |
compatible = "samsung,s5pv210-uart"; |
| 316 |
reg = <0xe2900000 0x400>; |
| 317 |
interrupt-parent = <&vic1>; |
| 318 |
interrupts = <10>; |
| 319 |
clock-names = "uart", "clk_uart_baud0", |
| 320 |
"clk_uart_baud1"; |
| 321 |
clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>, |
| 322 |
<&clocks SCLK_UART0>; |
| 323 |
status = "disabled"; |
| 324 |
}; |
| 325 |
|
| 326 |
uart1: serial@e2900400 { |
| 327 |
compatible = "samsung,s5pv210-uart"; |
| 328 |
reg = <0xe2900400 0x400>; |
| 329 |
interrupt-parent = <&vic1>; |
| 330 |
interrupts = <11>; |
| 331 |
clock-names = "uart", "clk_uart_baud0", |
| 332 |
"clk_uart_baud1"; |
| 333 |
clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>, |
| 334 |
<&clocks SCLK_UART1>; |
| 335 |
status = "disabled"; |
| 336 |
}; |
| 337 |
|
| 338 |
uart2: serial@e2900800 { |
| 339 |
compatible = "samsung,s5pv210-uart"; |
| 340 |
reg = <0xe2900800 0x400>; |
| 341 |
interrupt-parent = <&vic1>; |
| 342 |
interrupts = <12>; |
| 343 |
clock-names = "uart", "clk_uart_baud0", |
| 344 |
"clk_uart_baud1"; |
| 345 |
clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>, |
| 346 |
<&clocks SCLK_UART2>; |
| 347 |
status = "disabled"; |
| 348 |
}; |
| 349 |
|
| 350 |
uart3: serial@e2900c00 { |
| 351 |
compatible = "samsung,s5pv210-uart"; |
| 352 |
reg = <0xe2900c00 0x400>; |
| 353 |
interrupt-parent = <&vic1>; |
| 354 |
interrupts = <13>; |
| 355 |
clock-names = "uart", "clk_uart_baud0", |
| 356 |
"clk_uart_baud1"; |
| 357 |
clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>, |
| 358 |
<&clocks SCLK_UART3>; |
| 359 |
status = "disabled"; |
| 360 |
}; |
| 361 |
|
| 362 |
sdhci0: mmc@eb000000 { |
| 363 |
compatible = "samsung,s3c6410-sdhci"; |
| 364 |
reg = <0xeb000000 0x100000>; |
| 365 |
interrupt-parent = <&vic1>; |
| 366 |
interrupts = <26>; |
| 367 |
clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; |
| 368 |
clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>, |
| 369 |
<&clocks SCLK_MMC0>; |
| 370 |
status = "disabled"; |
| 371 |
}; |
| 372 |
|
| 373 |
sdhci1: mmc@eb100000 { |
| 374 |
compatible = "samsung,s3c6410-sdhci"; |
| 375 |
reg = <0xeb100000 0x100000>; |
| 376 |
interrupt-parent = <&vic1>; |
| 377 |
interrupts = <27>; |
| 378 |
clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; |
| 379 |
clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>, |
| 380 |
<&clocks SCLK_MMC1>; |
| 381 |
status = "disabled"; |
| 382 |
}; |
| 383 |
|
| 384 |
sdhci2: mmc@eb200000 { |
| 385 |
compatible = "samsung,s3c6410-sdhci"; |
| 386 |
reg = <0xeb200000 0x100000>; |
| 387 |
interrupt-parent = <&vic1>; |
| 388 |
interrupts = <28>; |
| 389 |
clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; |
| 390 |
clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>, |
| 391 |
<&clocks SCLK_MMC2>; |
| 392 |
status = "disabled"; |
| 393 |
}; |
| 394 |
|
| 395 |
sdhci3: mmc@eb300000 { |
| 396 |
compatible = "samsung,s3c6410-sdhci"; |
| 397 |
reg = <0xeb300000 0x100000>; |
| 398 |
interrupt-parent = <&vic3>; |
| 399 |
interrupts = <2>; |
| 400 |
clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3"; |
| 401 |
clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>, |
| 402 |
<&clocks SCLK_MMC3>; |
| 403 |
status = "disabled"; |
| 404 |
}; |
| 405 |
|
| 406 |
hsotg: usb@ec000000 { |
| 407 |
compatible = "samsung,s3c6400-hsotg"; |
| 408 |
reg = <0xec000000 0x20000>; |
| 409 |
interrupt-parent = <&vic1>; |
| 410 |
interrupts = <24>; |
| 411 |
clocks = <&clocks CLK_USB_OTG>; |
| 412 |
clock-names = "otg"; |
| 413 |
phy-names = "usb2-phy"; |
| 414 |
phys = <&usbphy 0>; |
| 415 |
status = "disabled"; |
| 416 |
}; |
| 417 |
|
| 418 |
usbphy: usbphy@ec100000 { |
| 419 |
compatible = "samsung,s5pv210-usb2-phy"; |
| 420 |
reg = <0xec100000 0x100>; |
| 421 |
samsung,pmureg-phandle = <&pmu_syscon>; |
| 422 |
clocks = <&clocks CLK_USB_OTG>, <&xusbxti>; |
| 423 |
clock-names = "phy", "ref"; |
| 424 |
#phy-cells = <1>; |
| 425 |
status = "disabled"; |
| 426 |
}; |
| 427 |
|
| 428 |
ehci: usb@ec200000 { |
| 429 |
compatible = "samsung,exynos4210-ehci"; |
| 430 |
reg = <0xec200000 0x100>; |
| 431 |
interrupts = <23>; |
| 432 |
interrupt-parent = <&vic1>; |
| 433 |
clocks = <&clocks CLK_USB_HOST>; |
| 434 |
clock-names = "usbhost"; |
| 435 |
phys = <&usbphy 1>; |
| 436 |
phy-names = "host"; |
| 437 |
status = "disabled"; |
| 438 |
}; |
| 439 |
|
| 440 |
ohci: usb@ec300000 { |
| 441 |
compatible = "samsung,exynos4210-ohci"; |
| 442 |
reg = <0xec300000 0x100>; |
| 443 |
interrupts = <23>; |
| 444 |
interrupt-parent = <&vic1>; |
| 445 |
clocks = <&clocks CLK_USB_HOST>; |
| 446 |
clock-names = "usbhost"; |
| 447 |
phys = <&usbphy 1>; |
| 448 |
phy-names = "host"; |
| 449 |
status = "disabled"; |
| 450 |
}; |
| 451 |
|
| 452 |
mfc: codec@f1700000 { |
| 453 |
compatible = "samsung,mfc-v5"; |
| 454 |
reg = <0xf1700000 0x10000>; |
| 455 |
interrupt-parent = <&vic2>; |
| 456 |
interrupts = <14>; |
| 457 |
clocks = <&clocks CLK_MFC>, <&clocks DOUT_MFC>; |
| 458 |
clock-names = "mfc", "sclk_mfc"; |
| 459 |
}; |
| 460 |
|
| 461 |
vic0: interrupt-controller@f2000000 { |
| 462 |
compatible = "arm,pl192-vic"; |
| 463 |
interrupt-controller; |
| 464 |
reg = <0xf2000000 0x1000>; |
| 465 |
#interrupt-cells = <1>; |
| 466 |
}; |
| 467 |
|
| 468 |
vic1: interrupt-controller@f2100000 { |
| 469 |
compatible = "arm,pl192-vic"; |
| 470 |
interrupt-controller; |
| 471 |
reg = <0xf2100000 0x1000>; |
| 472 |
#interrupt-cells = <1>; |
| 473 |
}; |
| 474 |
|
| 475 |
vic2: interrupt-controller@f2200000 { |
| 476 |
compatible = "arm,pl192-vic"; |
| 477 |
interrupt-controller; |
| 478 |
reg = <0xf2200000 0x1000>; |
| 479 |
#interrupt-cells = <1>; |
| 480 |
}; |
| 481 |
|
| 482 |
vic3: interrupt-controller@f2300000 { |
| 483 |
compatible = "arm,pl192-vic"; |
| 484 |
interrupt-controller; |
| 485 |
reg = <0xf2300000 0x1000>; |
| 486 |
#interrupt-cells = <1>; |
| 487 |
}; |
| 488 |
|
| 489 |
fimd: fimd@f8000000 { |
| 490 |
compatible = "samsung,s5pv210-fimd"; |
| 491 |
interrupt-parent = <&vic2>; |
| 492 |
reg = <0xf8000000 0x20000>; |
| 493 |
interrupt-names = "fifo", "vsync", "lcd_sys"; |
| 494 |
interrupts = <0>, <1>, <2>; |
| 495 |
clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>; |
| 496 |
clock-names = "sclk_fimd", "fimd"; |
| 497 |
status = "disabled"; |
| 498 |
}; |
| 499 |
|
| 500 |
dmc0: dmc@f0000000 { |
| 501 |
compatible = "samsung,s5pv210-dmc"; |
| 502 |
reg = <0xf0000000 0x1000>; |
| 503 |
}; |
| 504 |
|
| 505 |
dmc1: dmc@f1400000 { |
| 506 |
compatible = "samsung,s5pv210-dmc"; |
| 507 |
reg = <0xf1400000 0x1000>; |
| 508 |
}; |
| 509 |
|
| 510 |
g2d: g2d@fa000000 { |
| 511 |
compatible = "samsung,s5pv210-g2d"; |
| 512 |
reg = <0xfa000000 0x1000>; |
| 513 |
interrupt-parent = <&vic2>; |
| 514 |
interrupts = <9>; |
| 515 |
clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>; |
| 516 |
clock-names = "sclk_fimg2d", "fimg2d"; |
| 517 |
}; |
| 518 |
|
| 519 |
mdma1: dma-controller@fa200000 { |
| 520 |
compatible = "arm,pl330", "arm,primecell"; |
| 521 |
reg = <0xfa200000 0x1000>; |
| 522 |
interrupt-parent = <&vic0>; |
| 523 |
interrupts = <18>; |
| 524 |
clocks = <&clocks CLK_MDMA>; |
| 525 |
clock-names = "apb_pclk"; |
| 526 |
#dma-cells = <1>; |
| 527 |
}; |
| 528 |
|
| 529 |
rotator: rotator@fa300000 { |
| 530 |
compatible = "samsung,s5pv210-rotator"; |
| 531 |
reg = <0xfa300000 0x1000>; |
| 532 |
interrupt-parent = <&vic2>; |
| 533 |
interrupts = <4>; |
| 534 |
clocks = <&clocks CLK_ROTATOR>; |
| 535 |
clock-names = "rotator"; |
| 536 |
}; |
| 537 |
|
| 538 |
i2c1: i2c@fab00000 { |
| 539 |
compatible = "samsung,s3c2440-i2c"; |
| 540 |
reg = <0xfab00000 0x1000>; |
| 541 |
interrupt-parent = <&vic2>; |
| 542 |
interrupts = <13>; |
| 543 |
clocks = <&clocks CLK_I2C1>; |
| 544 |
clock-names = "i2c"; |
| 545 |
pinctrl-names = "default"; |
| 546 |
pinctrl-0 = <&i2c1_bus>; |
| 547 |
#address-cells = <1>; |
| 548 |
#size-cells = <0>; |
| 549 |
status = "disabled"; |
| 550 |
}; |
| 551 |
|
| 552 |
camera: camera@fa600000 { |
| 553 |
compatible = "samsung,fimc"; |
| 554 |
ranges = <0x0 0xfa600000 0xe01000>; |
| 555 |
clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>; |
| 556 |
clock-names = "sclk_cam0", "sclk_cam1"; |
| 557 |
#address-cells = <1>; |
| 558 |
#size-cells = <1>; |
| 559 |
#clock-cells = <1>; |
| 560 |
clock-output-names = "cam_a_clkout", "cam_b_clkout"; |
| 561 |
|
| 562 |
csis0: csis@0 { |
| 563 |
compatible = "samsung,s5pv210-csis"; |
| 564 |
reg = <0x00000000 0x4000>; |
| 565 |
interrupt-parent = <&vic2>; |
| 566 |
interrupts = <29>; |
| 567 |
clocks = <&clocks CLK_CSIS>, |
| 568 |
<&clocks SCLK_CSIS>; |
| 569 |
clock-names = "csis", |
| 570 |
"sclk_csis"; |
| 571 |
bus-width = <4>; |
| 572 |
status = "disabled"; |
| 573 |
#address-cells = <1>; |
| 574 |
#size-cells = <0>; |
| 575 |
}; |
| 576 |
|
| 577 |
fimc0: fimc@c00000 { |
| 578 |
compatible = "samsung,s5pv210-fimc"; |
| 579 |
reg = <0x00c00000 0x1000>; |
| 580 |
interrupts = <5>; |
| 581 |
interrupt-parent = <&vic2>; |
| 582 |
clocks = <&clocks CLK_FIMC0>, |
| 583 |
<&clocks SCLK_FIMC0>; |
| 584 |
clock-names = "fimc", |
| 585 |
"sclk_fimc"; |
| 586 |
samsung,pix-limits = <4224 8192 1920 4224>; |
| 587 |
samsung,min-pix-alignment = <16 8>; |
| 588 |
samsung,cam-if; |
| 589 |
}; |
| 590 |
|
| 591 |
fimc1: fimc@d00000 { |
| 592 |
compatible = "samsung,s5pv210-fimc"; |
| 593 |
reg = <0x00d00000 0x1000>; |
| 594 |
interrupt-parent = <&vic2>; |
| 595 |
interrupts = <6>; |
| 596 |
clocks = <&clocks CLK_FIMC1>, |
| 597 |
<&clocks SCLK_FIMC1>; |
| 598 |
clock-names = "fimc", |
| 599 |
"sclk_fimc"; |
| 600 |
samsung,pix-limits = <4224 8192 1920 4224>; |
| 601 |
samsung,min-pix-alignment = <1 1>; |
| 602 |
samsung,mainscaler-ext; |
| 603 |
samsung,cam-if; |
| 604 |
samsung,lcd-wb; |
| 605 |
}; |
| 606 |
|
| 607 |
fimc2: fimc@e00000 { |
| 608 |
compatible = "samsung,s5pv210-fimc"; |
| 609 |
reg = <0x00e00000 0x1000>; |
| 610 |
interrupt-parent = <&vic2>; |
| 611 |
interrupts = <7>; |
| 612 |
clocks = <&clocks CLK_FIMC2>, |
| 613 |
<&clocks SCLK_FIMC2>; |
| 614 |
clock-names = "fimc", |
| 615 |
"sclk_fimc"; |
| 616 |
samsung,pix-limits = <1920 8192 1280 1920>; |
| 617 |
samsung,min-pix-alignment = <16 8>; |
| 618 |
samsung,rotators = <0>; |
| 619 |
samsung,cam-if; |
| 620 |
}; |
| 621 |
}; |
| 622 |
|
| 623 |
jpeg_codec: jpeg-codec@fb600000 { |
| 624 |
compatible = "samsung,s5pv210-jpeg"; |
| 625 |
reg = <0xfb600000 0x1000>; |
| 626 |
interrupt-parent = <&vic2>; |
| 627 |
interrupts = <8>; |
| 628 |
clocks = <&clocks CLK_JPEG>; |
| 629 |
clock-names = "jpeg"; |
| 630 |
}; |
| 631 |
}; |
| 632 |
}; |
| 633 |
|
| 634 |
#include "s5pv210-pinctrl.dtsi" |