| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Hardkernel Odroid XU board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
* Copyright (c) 2016 Krzysztof Kozlowski |
| 8 |
*/ |
| 9 |
|
| 10 |
/dts-v1/; |
| 11 |
#include "exynos5410.dtsi" |
| 12 |
#include <dt-bindings/clock/maxim,max77802.h> |
| 13 |
#include <dt-bindings/gpio/gpio.h> |
| 14 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 15 |
#include <dt-bindings/sound/samsung-i2s.h> |
| 16 |
#include "exynos54xx-odroidxu-leds.dtsi" |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "Hardkernel Odroid XU"; |
| 20 |
compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5"; |
| 21 |
|
| 22 |
aliases { |
| 23 |
ethernet = ðernet; |
| 24 |
mmc0 = &mmc_0; |
| 25 |
mmc1 = &mmc_2; |
| 26 |
}; |
| 27 |
|
| 28 |
memory@40000000 { |
| 29 |
device_type = "memory"; |
| 30 |
reg = <0x40000000 0x7ea00000>; |
| 31 |
}; |
| 32 |
|
| 33 |
chosen { |
| 34 |
stdout-path = "serial2:115200n8"; |
| 35 |
}; |
| 36 |
|
| 37 |
emmc_pwrseq: pwrseq { |
| 38 |
pinctrl-0 = <&emmc_nrst_pin>; |
| 39 |
pinctrl-names = "default"; |
| 40 |
compatible = "mmc-pwrseq-emmc"; |
| 41 |
reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; |
| 42 |
}; |
| 43 |
|
| 44 |
fan0: pwm-fan { |
| 45 |
compatible = "pwm-fan"; |
| 46 |
pwms = <&pwm 0 20972 0>; |
| 47 |
#cooling-cells = <2>; |
| 48 |
cooling-levels = <0 130 170 230>; |
| 49 |
}; |
| 50 |
|
| 51 |
fin_pll: xxti { |
| 52 |
compatible = "fixed-clock"; |
| 53 |
clock-frequency = <24000000>; |
| 54 |
clock-output-names = "fin_pll"; |
| 55 |
#clock-cells = <0>; |
| 56 |
}; |
| 57 |
|
| 58 |
firmware@2073000 { |
| 59 |
compatible = "samsung,secure-firmware"; |
| 60 |
reg = <0x02073000 0x1000>; |
| 61 |
}; |
| 62 |
|
| 63 |
sound: sound { |
| 64 |
compatible = "simple-audio-card"; |
| 65 |
|
| 66 |
simple-audio-card,name = "Odroid-XU"; |
| 67 |
simple-audio-card,widgets = |
| 68 |
"Headphone", "Headphone Jack", |
| 69 |
"Speakers", "Speakers"; |
| 70 |
simple-audio-card,routing = |
| 71 |
"Headphone Jack", "HPL", |
| 72 |
"Headphone Jack", "HPR", |
| 73 |
"Headphone Jack", "MICBIAS", |
| 74 |
"IN1", "Headphone Jack", |
| 75 |
"Speakers", "SPKL", |
| 76 |
"Speakers", "SPKR"; |
| 77 |
|
| 78 |
simple-audio-card,format = "i2s"; |
| 79 |
simple-audio-card,bitclock-master = <&link0_codec>; |
| 80 |
simple-audio-card,frame-master = <&link0_codec>; |
| 81 |
|
| 82 |
simple-audio-card,cpu { |
| 83 |
sound-dai = <&audi2s0 0>; |
| 84 |
system-clock-frequency = <19200000>; |
| 85 |
}; |
| 86 |
|
| 87 |
link0_codec: simple-audio-card,codec { |
| 88 |
sound-dai = <&max98090>; |
| 89 |
clocks = <&audi2s0 CLK_I2S_CDCLK>; |
| 90 |
}; |
| 91 |
}; |
| 92 |
}; |
| 93 |
|
| 94 |
&adc { |
| 95 |
vdd-supply = <&ldo10_reg>; |
| 96 |
status = "okay"; |
| 97 |
}; |
| 98 |
|
| 99 |
&audi2s0 { |
| 100 |
status = "okay"; |
| 101 |
}; |
| 102 |
|
| 103 |
&clock { |
| 104 |
clocks = <&fin_pll>; |
| 105 |
assigned-clocks = <&clock CLK_FOUT_EPLL>; |
| 106 |
assigned-clock-rates = <192000000>; |
| 107 |
}; |
| 108 |
|
| 109 |
&clock_audss { |
| 110 |
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, |
| 111 |
<&clock_audss EXYNOS_MOUT_I2S>, |
| 112 |
<&clock_audss EXYNOS_DOUT_SRP>, |
| 113 |
<&clock_audss EXYNOS_DOUT_AUD_BUS>; |
| 114 |
|
| 115 |
assigned-clock-parents = <&clock CLK_FOUT_EPLL>, |
| 116 |
<&clock_audss EXYNOS_MOUT_AUDSS>; |
| 117 |
|
| 118 |
assigned-clock-rates = <0>, |
| 119 |
<0>, |
| 120 |
<96000000>, |
| 121 |
<19200000>; |
| 122 |
}; |
| 123 |
|
| 124 |
&cpu0_thermal { |
| 125 |
polling-delay-passive = <0>; |
| 126 |
polling-delay = <0>; |
| 127 |
|
| 128 |
trips { |
| 129 |
cpu_alert0: cpu-alert-0 { |
| 130 |
temperature = <50000>; /* millicelsius */ |
| 131 |
hysteresis = <5000>; /* millicelsius */ |
| 132 |
type = "active"; |
| 133 |
}; |
| 134 |
cpu_alert1: cpu-alert-1 { |
| 135 |
temperature = <60000>; /* millicelsius */ |
| 136 |
hysteresis = <5000>; /* millicelsius */ |
| 137 |
type = "active"; |
| 138 |
}; |
| 139 |
cpu_alert2: cpu-alert-2 { |
| 140 |
temperature = <70000>; /* millicelsius */ |
| 141 |
hysteresis = <5000>; /* millicelsius */ |
| 142 |
type = "active"; |
| 143 |
}; |
| 144 |
cpu_crit0: cpu-crit-0 { |
| 145 |
temperature = <120000>; /* millicelsius */ |
| 146 |
hysteresis = <0>; /* millicelsius */ |
| 147 |
type = "critical"; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
cooling-maps { |
| 152 |
map0 { |
| 153 |
trip = <&cpu_alert0>; |
| 154 |
cooling-device = <&fan0 0 1>; |
| 155 |
}; |
| 156 |
map1 { |
| 157 |
trip = <&cpu_alert1>; |
| 158 |
cooling-device = <&fan0 1 2>; |
| 159 |
}; |
| 160 |
map2 { |
| 161 |
trip = <&cpu_alert2>; |
| 162 |
cooling-device = <&fan0 2 3>; |
| 163 |
}; |
| 164 |
}; |
| 165 |
}; |
| 166 |
|
| 167 |
&hsi2c_4 { |
| 168 |
clock-frequency = <400000>; |
| 169 |
status = "okay"; |
| 170 |
|
| 171 |
usb3503: usb-hub@8 { |
| 172 |
compatible = "smsc,usb3503"; |
| 173 |
reg = <0x08>; |
| 174 |
|
| 175 |
intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; |
| 176 |
connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; |
| 177 |
reset-gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; |
| 178 |
initial-mode = <1>; |
| 179 |
|
| 180 |
clock-names = "refclk"; |
| 181 |
clocks = <&pmu_system_controller 0>; |
| 182 |
refclk-frequency = <24000000>; |
| 183 |
}; |
| 184 |
|
| 185 |
max77802: pmic@9 { |
| 186 |
compatible = "maxim,max77802"; |
| 187 |
reg = <0x9>; |
| 188 |
interrupt-parent = <&gpx0>; |
| 189 |
interrupts = <4 IRQ_TYPE_NONE>; |
| 190 |
pinctrl-names = "default"; |
| 191 |
pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>; |
| 192 |
wakeup-source; |
| 193 |
#clock-cells = <1>; |
| 194 |
|
| 195 |
inl1-supply = <&buck5_reg>; |
| 196 |
inl2-supply = <&buck7_reg>; |
| 197 |
inl3-supply = <&buck9_reg>; |
| 198 |
inl4-supply = <&buck9_reg>; |
| 199 |
inl5-supply = <&buck9_reg>; |
| 200 |
inl6-supply = <&buck10_reg>; |
| 201 |
inl7-supply = <&buck9_reg>; |
| 202 |
/* inl9 supply is BOOST, not configured here */ |
| 203 |
inl10-supply = <&buck7_reg>; |
| 204 |
|
| 205 |
regulators { |
| 206 |
buck1_reg: BUCK1 { |
| 207 |
regulator-name = "vdd_mif"; |
| 208 |
regulator-min-microvolt = <800000>; |
| 209 |
regulator-max-microvolt = <1300000>; |
| 210 |
regulator-always-on; |
| 211 |
regulator-boot-on; |
| 212 |
}; |
| 213 |
|
| 214 |
buck2_reg: BUCK2 { |
| 215 |
regulator-name = "vdd_arm"; |
| 216 |
regulator-min-microvolt = <800000>; |
| 217 |
regulator-max-microvolt = <1500000>; |
| 218 |
regulator-always-on; |
| 219 |
regulator-boot-on; |
| 220 |
}; |
| 221 |
|
| 222 |
buck3_reg: BUCK3 { |
| 223 |
regulator-name = "vdd_int"; |
| 224 |
regulator-min-microvolt = <800000>; |
| 225 |
regulator-max-microvolt = <1400000>; |
| 226 |
regulator-always-on; |
| 227 |
regulator-boot-on; |
| 228 |
}; |
| 229 |
|
| 230 |
buck4_reg: BUCK4 { |
| 231 |
regulator-name = "vdd_g3d"; |
| 232 |
regulator-min-microvolt = <800000>; |
| 233 |
regulator-max-microvolt = <1400000>; |
| 234 |
regulator-always-on; |
| 235 |
regulator-boot-on; |
| 236 |
}; |
| 237 |
|
| 238 |
buck5_reg: BUCK5 { |
| 239 |
regulator-name = "vdd_mem"; |
| 240 |
regulator-min-microvolt = <800000>; |
| 241 |
regulator-max-microvolt = <1500000>; |
| 242 |
regulator-always-on; |
| 243 |
regulator-boot-on; |
| 244 |
}; |
| 245 |
|
| 246 |
buck6_reg: BUCK6 { |
| 247 |
regulator-name = "vdd_kfc"; |
| 248 |
regulator-min-microvolt = <800000>; |
| 249 |
regulator-max-microvolt = <1500000>; |
| 250 |
regulator-always-on; |
| 251 |
regulator-boot-on; |
| 252 |
}; |
| 253 |
|
| 254 |
buck7_reg: BUCK7 { |
| 255 |
regulator-name = "buck7"; |
| 256 |
regulator-min-microvolt = <1300000>; |
| 257 |
regulator-max-microvolt = <1300000>; |
| 258 |
regulator-always-on; |
| 259 |
regulator-boot-on; |
| 260 |
}; |
| 261 |
|
| 262 |
buck8_reg: BUCK8 { |
| 263 |
/* vdd_mmc0 */ |
| 264 |
regulator-name = "vddf_2v85"; |
| 265 |
regulator-min-microvolt = <2850000>; |
| 266 |
regulator-max-microvolt = <2850000>; |
| 267 |
regulator-always-on; |
| 268 |
regulator-boot-on; |
| 269 |
}; |
| 270 |
|
| 271 |
buck9_reg: BUCK9 { |
| 272 |
regulator-name = "buck9"; |
| 273 |
regulator-min-microvolt = <3000000>; |
| 274 |
regulator-max-microvolt = <3000000>; |
| 275 |
regulator-always-on; |
| 276 |
regulator-boot-on; |
| 277 |
}; |
| 278 |
|
| 279 |
buck10_reg: BUCK10 { |
| 280 |
regulator-name = "buck10"; |
| 281 |
regulator-min-microvolt = <2950000>; |
| 282 |
regulator-max-microvolt = <2950000>; |
| 283 |
regulator-always-on; |
| 284 |
regulator-boot-on; |
| 285 |
}; |
| 286 |
|
| 287 |
ldo1_reg: LDO1 { |
| 288 |
regulator-name = "vdd_alive"; |
| 289 |
regulator-min-microvolt = <1000000>; |
| 290 |
regulator-max-microvolt = <1000000>; |
| 291 |
regulator-always-on; |
| 292 |
}; |
| 293 |
|
| 294 |
ldo2_reg: LDO2 { |
| 295 |
regulator-name = "vddq_m1_m2"; |
| 296 |
regulator-min-microvolt = <1200000>; |
| 297 |
regulator-max-microvolt = <1200000>; |
| 298 |
regulator-always-on; |
| 299 |
}; |
| 300 |
|
| 301 |
ldo3_reg: LDO3 { |
| 302 |
regulator-name = "vddq_gpio"; |
| 303 |
regulator-min-microvolt = <1800000>; |
| 304 |
regulator-max-microvolt = <1800000>; |
| 305 |
regulator-always-on; |
| 306 |
}; |
| 307 |
|
| 308 |
ldo4_reg: LDO4 { |
| 309 |
regulator-name = "vddq_mmc2"; |
| 310 |
regulator-min-microvolt = <1800000>; |
| 311 |
regulator-max-microvolt = <3000000>; |
| 312 |
/* Having it off prevents reboot */ |
| 313 |
regulator-always-on; |
| 314 |
}; |
| 315 |
|
| 316 |
ldo5_reg: LDO5 { |
| 317 |
regulator-name = "vdd18_hsic"; |
| 318 |
regulator-min-microvolt = <1800000>; |
| 319 |
regulator-max-microvolt = <1800000>; |
| 320 |
regulator-always-on; |
| 321 |
}; |
| 322 |
|
| 323 |
ldo6_reg: LDO6 { |
| 324 |
regulator-name = "vdd18_bpll"; |
| 325 |
regulator-min-microvolt = <1800000>; |
| 326 |
regulator-max-microvolt = <1800000>; |
| 327 |
regulator-always-on; |
| 328 |
}; |
| 329 |
|
| 330 |
ldo7_reg: LDO7 { |
| 331 |
regulator-name = "vddq_lcd"; |
| 332 |
regulator-min-microvolt = <1800000>; |
| 333 |
regulator-max-microvolt = <1800000>; |
| 334 |
/* Supplies also GPK and GPJ */ |
| 335 |
regulator-always-on; |
| 336 |
}; |
| 337 |
|
| 338 |
ldo8_reg: LDO8 { |
| 339 |
regulator-name = "vdd10_hdmi"; |
| 340 |
regulator-min-microvolt = <1000000>; |
| 341 |
regulator-max-microvolt = <1000000>; |
| 342 |
regulator-always-on; |
| 343 |
}; |
| 344 |
|
| 345 |
ldo9_reg: LDO9 { |
| 346 |
regulator-name = "ldo9"; |
| 347 |
}; |
| 348 |
|
| 349 |
ldo10_reg: LDO10 { |
| 350 |
regulator-name = "vdd18_mipi"; |
| 351 |
regulator-min-microvolt = <1800000>; |
| 352 |
regulator-max-microvolt = <1800000>; |
| 353 |
regulator-always-on; |
| 354 |
}; |
| 355 |
|
| 356 |
ldo11_reg: LDO11 { |
| 357 |
regulator-name = "vddq_mmc01"; |
| 358 |
regulator-min-microvolt = <1800000>; |
| 359 |
regulator-max-microvolt = <1800000>; |
| 360 |
/* |
| 361 |
* Having it off prevents accessing MMC after |
| 362 |
* reboot with error: |
| 363 |
* MMC Device 1: Clock OFF has been failed. |
| 364 |
*/ |
| 365 |
regulator-always-on; |
| 366 |
}; |
| 367 |
|
| 368 |
ldo12_reg: LDO12 { |
| 369 |
regulator-name = "vdd33_usb3"; |
| 370 |
regulator-min-microvolt = <3300000>; |
| 371 |
regulator-max-microvolt = <3300000>; |
| 372 |
regulator-always-on; |
| 373 |
}; |
| 374 |
|
| 375 |
ldo13_reg: LDO13 { |
| 376 |
regulator-name = "vddq_abbg0"; |
| 377 |
regulator-min-microvolt = <1800000>; |
| 378 |
regulator-max-microvolt = <1800000>; |
| 379 |
regulator-always-on; |
| 380 |
}; |
| 381 |
|
| 382 |
ldo14_reg: LDO14 { |
| 383 |
regulator-name = "vddq_abbg1"; |
| 384 |
regulator-min-microvolt = <1800000>; |
| 385 |
regulator-max-microvolt = <1800000>; |
| 386 |
regulator-always-on; |
| 387 |
}; |
| 388 |
|
| 389 |
ldo15_reg: LDO15 { |
| 390 |
regulator-name = "vdd10_usb3"; |
| 391 |
regulator-min-microvolt = <1000000>; |
| 392 |
regulator-max-microvolt = <1000000>; |
| 393 |
regulator-always-on; |
| 394 |
}; |
| 395 |
|
| 396 |
ldo17_reg: LDO17 { |
| 397 |
regulator-name = "cam_sensor_core"; |
| 398 |
regulator-min-microvolt = <1200000>; |
| 399 |
regulator-max-microvolt = <1200000>; |
| 400 |
}; |
| 401 |
|
| 402 |
ldo18_reg: LDO18 { |
| 403 |
regulator-name = "ldo18"; |
| 404 |
regulator-min-microvolt = <1800000>; |
| 405 |
regulator-max-microvolt = <1800000>; |
| 406 |
}; |
| 407 |
|
| 408 |
ldo19_reg: LDO19 { |
| 409 |
regulator-name = "ldo19"; |
| 410 |
}; |
| 411 |
|
| 412 |
ldo20_reg: LDO20 { |
| 413 |
regulator-name = "vdd_mmc0"; |
| 414 |
regulator-min-microvolt = <1800000>; |
| 415 |
regulator-max-microvolt = <1800000>; |
| 416 |
}; |
| 417 |
|
| 418 |
ldo21_reg: LDO21 { |
| 419 |
/* vdd_mmc2 */ |
| 420 |
regulator-name = "vddf_2v8"; |
| 421 |
regulator-min-microvolt = <2850000>; |
| 422 |
regulator-max-microvolt = <2850000>; |
| 423 |
}; |
| 424 |
|
| 425 |
ldo23_reg: LDO23 { |
| 426 |
regulator-name = "dp_p3v3"; |
| 427 |
regulator-min-microvolt = <3300000>; |
| 428 |
regulator-max-microvolt = <3300000>; |
| 429 |
regulator-always-on; |
| 430 |
}; |
| 431 |
|
| 432 |
ldo24_reg: LDO24 { |
| 433 |
regulator-name = "cam_af"; |
| 434 |
regulator-min-microvolt = <2800000>; |
| 435 |
regulator-max-microvolt = <2800000>; |
| 436 |
}; |
| 437 |
|
| 438 |
ldo25_reg: LDO25 { |
| 439 |
regulator-name = "eth_p3v3"; |
| 440 |
regulator-min-microvolt = <3300000>; |
| 441 |
regulator-max-microvolt = <3300000>; |
| 442 |
regulator-always-on; |
| 443 |
}; |
| 444 |
|
| 445 |
ldo26_reg: LDO26 { |
| 446 |
regulator-name = "usb30_extclk"; |
| 447 |
regulator-min-microvolt = <3300000>; |
| 448 |
regulator-max-microvolt = <3300000>; |
| 449 |
regulator-always-on; |
| 450 |
}; |
| 451 |
|
| 452 |
ldo27_reg: LDO27 { |
| 453 |
regulator-name = "ldo27"; |
| 454 |
}; |
| 455 |
|
| 456 |
ldo28_reg: LDO28 { |
| 457 |
regulator-name = "ldo28"; |
| 458 |
}; |
| 459 |
|
| 460 |
ldo29_reg: LDO29 { |
| 461 |
regulator-name = "ldo29"; |
| 462 |
}; |
| 463 |
|
| 464 |
ldo30_reg: LDO30 { |
| 465 |
regulator-name = "vddq_e1_e2"; |
| 466 |
regulator-min-microvolt = <1200000>; |
| 467 |
regulator-max-microvolt = <1200000>; |
| 468 |
regulator-always-on; |
| 469 |
}; |
| 470 |
|
| 471 |
/* On revisions with ti,ina231 this is sensor VS */ |
| 472 |
ldo32_reg: LDO32 { |
| 473 |
regulator-name = "vs_power_meter"; |
| 474 |
regulator-min-microvolt = <3300000>; |
| 475 |
regulator-max-microvolt = <3300000>; |
| 476 |
}; |
| 477 |
|
| 478 |
ldo33_reg: LDO33 { |
| 479 |
regulator-name = "ldo33"; |
| 480 |
}; |
| 481 |
|
| 482 |
ldo34_reg: LDO34 { |
| 483 |
regulator-name = "ldo34"; |
| 484 |
}; |
| 485 |
|
| 486 |
ldo35_reg: LDO35 { |
| 487 |
regulator-name = "ldo35"; |
| 488 |
}; |
| 489 |
}; |
| 490 |
}; |
| 491 |
}; |
| 492 |
|
| 493 |
&i2c_1 { |
| 494 |
status = "okay"; |
| 495 |
max98090: audio-codec@10 { |
| 496 |
compatible = "maxim,max98090"; |
| 497 |
reg = <0x10>; |
| 498 |
interrupt-parent = <&gpj3>; |
| 499 |
interrupts = <0 IRQ_TYPE_NONE>; |
| 500 |
clocks = <&audi2s0 CLK_I2S_CDCLK>; |
| 501 |
clock-names = "mclk"; |
| 502 |
#sound-dai-cells = <0>; |
| 503 |
}; |
| 504 |
}; |
| 505 |
|
| 506 |
&mmc_0 { |
| 507 |
status = "okay"; |
| 508 |
mmc-pwrseq = <&emmc_pwrseq>; |
| 509 |
cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; |
| 510 |
card-detect-delay = <200>; |
| 511 |
samsung,dw-mshc-ciu-div = <3>; |
| 512 |
samsung,dw-mshc-sdr-timing = <0 4>; |
| 513 |
samsung,dw-mshc-ddr-timing = <0 2>; |
| 514 |
pinctrl-names = "default"; |
| 515 |
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; |
| 516 |
bus-width = <8>; |
| 517 |
cap-mmc-highspeed; |
| 518 |
mmc-ddr-1_8v; |
| 519 |
mmc-hs200-1_8v; |
| 520 |
vmmc-supply = <&ldo20_reg>; |
| 521 |
vqmmc-supply = <&ldo11_reg>; |
| 522 |
}; |
| 523 |
|
| 524 |
&mmc_2 { |
| 525 |
status = "okay"; |
| 526 |
card-detect-delay = <200>; |
| 527 |
samsung,dw-mshc-ciu-div = <3>; |
| 528 |
samsung,dw-mshc-sdr-timing = <0 4>; |
| 529 |
samsung,dw-mshc-ddr-timing = <0 2>; |
| 530 |
pinctrl-names = "default"; |
| 531 |
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>; |
| 532 |
bus-width = <4>; |
| 533 |
cap-sd-highspeed; |
| 534 |
vmmc-supply = <&ldo21_reg>; |
| 535 |
vqmmc-supply = <&ldo4_reg>; |
| 536 |
}; |
| 537 |
|
| 538 |
&pinctrl_0 { |
| 539 |
emmc_nrst_pin: emmc-nrst-pins { |
| 540 |
samsung,pins = "gpd1-0"; |
| 541 |
samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| 542 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 543 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 544 |
}; |
| 545 |
|
| 546 |
sd2_wp: sd2-wp-pins { |
| 547 |
samsung,pins = "gpm5-0"; |
| 548 |
samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| 549 |
/* Pin is floating so be sure to disable write-protect */ |
| 550 |
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| 551 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; |
| 552 |
}; |
| 553 |
|
| 554 |
pmic_dvs_2: pmic-dvs-2-pins { |
| 555 |
samsung,pins = "gpx0-0", "gpx0-1"; |
| 556 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 557 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 558 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 559 |
}; |
| 560 |
|
| 561 |
pmic_dvs_1: pmic-dvs-1-pins { |
| 562 |
samsung,pins = "gpx0-2"; |
| 563 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 564 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 565 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 566 |
samsung,pin-val = <1>; |
| 567 |
}; |
| 568 |
|
| 569 |
max77802_irq: max77802-irq-pins { |
| 570 |
samsung,pins = "gpx0-4"; |
| 571 |
samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
| 572 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 573 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 574 |
}; |
| 575 |
}; |
| 576 |
|
| 577 |
&pwm { |
| 578 |
/* |
| 579 |
* PWM 0 -- fan |
| 580 |
* PWM 1 -- Green LED |
| 581 |
* PWM 2 -- Blue LED |
| 582 |
* PWM 3 -- on MIPI connector for backlight |
| 583 |
*/ |
| 584 |
pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; |
| 585 |
pinctrl-names = "default"; |
| 586 |
status = "okay"; |
| 587 |
}; |
| 588 |
|
| 589 |
&rtc { |
| 590 |
status = "okay"; |
| 591 |
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; |
| 592 |
clock-names = "rtc", "rtc_src"; |
| 593 |
}; |
| 594 |
|
| 595 |
&serial_0 { |
| 596 |
status = "okay"; |
| 597 |
}; |
| 598 |
|
| 599 |
&serial_1 { |
| 600 |
status = "okay"; |
| 601 |
}; |
| 602 |
|
| 603 |
&serial_2 { |
| 604 |
status = "okay"; |
| 605 |
}; |
| 606 |
|
| 607 |
&serial_3 { |
| 608 |
status = "okay"; |
| 609 |
}; |
| 610 |
|
| 611 |
&tmu_cpu0 { |
| 612 |
vtmu-supply = <&ldo10_reg>; |
| 613 |
}; |
| 614 |
|
| 615 |
&tmu_cpu1 { |
| 616 |
vtmu-supply = <&ldo10_reg>; |
| 617 |
}; |
| 618 |
|
| 619 |
&tmu_cpu2 { |
| 620 |
vtmu-supply = <&ldo10_reg>; |
| 621 |
}; |
| 622 |
|
| 623 |
&tmu_cpu3 { |
| 624 |
vtmu-supply = <&ldo10_reg>; |
| 625 |
}; |
| 626 |
|
| 627 |
&usb3_0_oc { |
| 628 |
/* External pull up */ |
| 629 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 630 |
}; |
| 631 |
|
| 632 |
&usb3_1_oc { |
| 633 |
/* External pull up */ |
| 634 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 635 |
}; |
| 636 |
|
| 637 |
&usbdrd_dwc3_0 { |
| 638 |
dr_mode = "peripheral"; |
| 639 |
}; |
| 640 |
|
| 641 |
&usbdrd_dwc3_1 { |
| 642 |
dr_mode = "host"; |
| 643 |
}; |
| 644 |
|
| 645 |
&usbdrd3_0 { |
| 646 |
vdd33-supply = <&ldo12_reg>; |
| 647 |
vdd10-supply = <&ldo15_reg>; |
| 648 |
}; |
| 649 |
|
| 650 |
&usbdrd3_1 { |
| 651 |
vdd33-supply = <&ldo12_reg>; |
| 652 |
vdd10-supply = <&ldo15_reg>; |
| 653 |
}; |
| 654 |
|
| 655 |
&usbhost2 { |
| 656 |
#address-cells = <1>; |
| 657 |
#size-cells = <0>; |
| 658 |
|
| 659 |
ethernet: ethernet@2 { |
| 660 |
compatible = "usb424,9730"; |
| 661 |
reg = <2>; |
| 662 |
local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */ |
| 663 |
}; |
| 664 |
}; |