| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung Exynos5422 SoC cpu device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2015 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
* |
| 8 |
* This file provides desired ordering for Exynos5422: CPU[0123] being the A7. |
| 9 |
* |
| 10 |
* The Exynos5420, 5422 and 5800 actually share the same CPU configuration |
| 11 |
* but particular boards choose different booting order. |
| 12 |
* |
| 13 |
* Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422 |
| 14 |
* booting cluster (big or LITTLE) is chosen by IROM code by reading |
| 15 |
* the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting |
| 16 |
* from the LITTLE: Cortex-A7. |
| 17 |
*/ |
| 18 |
|
| 19 |
/ { |
| 20 |
cpus { |
| 21 |
#address-cells = <1>; |
| 22 |
#size-cells = <0>; |
| 23 |
|
| 24 |
cpu-map { |
| 25 |
cluster0 { |
| 26 |
core0 { |
| 27 |
cpu = <&cpu0>; |
| 28 |
}; |
| 29 |
core1 { |
| 30 |
cpu = <&cpu1>; |
| 31 |
}; |
| 32 |
core2 { |
| 33 |
cpu = <&cpu2>; |
| 34 |
}; |
| 35 |
core3 { |
| 36 |
cpu = <&cpu3>; |
| 37 |
}; |
| 38 |
}; |
| 39 |
|
| 40 |
cluster1 { |
| 41 |
core0 { |
| 42 |
cpu = <&cpu4>; |
| 43 |
}; |
| 44 |
core1 { |
| 45 |
cpu = <&cpu5>; |
| 46 |
}; |
| 47 |
core2 { |
| 48 |
cpu = <&cpu6>; |
| 49 |
}; |
| 50 |
core3 { |
| 51 |
cpu = <&cpu7>; |
| 52 |
}; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
cpu0: cpu@100 { |
| 57 |
device_type = "cpu"; |
| 58 |
compatible = "arm,cortex-a7"; |
| 59 |
reg = <0x100>; |
| 60 |
clocks = <&clock CLK_KFC_CLK>; |
| 61 |
clock-frequency = <1000000000>; |
| 62 |
cci-control-port = <&cci_control0>; |
| 63 |
operating-points-v2 = <&cluster_a7_opp_table>; |
| 64 |
#cooling-cells = <2>; /* min followed by max */ |
| 65 |
capacity-dmips-mhz = <539>; |
| 66 |
dynamic-power-coefficient = <90>; |
| 67 |
}; |
| 68 |
|
| 69 |
cpu1: cpu@101 { |
| 70 |
device_type = "cpu"; |
| 71 |
compatible = "arm,cortex-a7"; |
| 72 |
reg = <0x101>; |
| 73 |
clocks = <&clock CLK_KFC_CLK>; |
| 74 |
clock-frequency = <1000000000>; |
| 75 |
cci-control-port = <&cci_control0>; |
| 76 |
operating-points-v2 = <&cluster_a7_opp_table>; |
| 77 |
#cooling-cells = <2>; /* min followed by max */ |
| 78 |
capacity-dmips-mhz = <539>; |
| 79 |
dynamic-power-coefficient = <90>; |
| 80 |
}; |
| 81 |
|
| 82 |
cpu2: cpu@102 { |
| 83 |
device_type = "cpu"; |
| 84 |
compatible = "arm,cortex-a7"; |
| 85 |
reg = <0x102>; |
| 86 |
clocks = <&clock CLK_KFC_CLK>; |
| 87 |
clock-frequency = <1000000000>; |
| 88 |
cci-control-port = <&cci_control0>; |
| 89 |
operating-points-v2 = <&cluster_a7_opp_table>; |
| 90 |
#cooling-cells = <2>; /* min followed by max */ |
| 91 |
capacity-dmips-mhz = <539>; |
| 92 |
dynamic-power-coefficient = <90>; |
| 93 |
}; |
| 94 |
|
| 95 |
cpu3: cpu@103 { |
| 96 |
device_type = "cpu"; |
| 97 |
compatible = "arm,cortex-a7"; |
| 98 |
reg = <0x103>; |
| 99 |
clocks = <&clock CLK_KFC_CLK>; |
| 100 |
clock-frequency = <1000000000>; |
| 101 |
cci-control-port = <&cci_control0>; |
| 102 |
operating-points-v2 = <&cluster_a7_opp_table>; |
| 103 |
#cooling-cells = <2>; /* min followed by max */ |
| 104 |
capacity-dmips-mhz = <539>; |
| 105 |
dynamic-power-coefficient = <90>; |
| 106 |
}; |
| 107 |
|
| 108 |
cpu4: cpu@0 { |
| 109 |
device_type = "cpu"; |
| 110 |
compatible = "arm,cortex-a15"; |
| 111 |
reg = <0x0>; |
| 112 |
clocks = <&clock CLK_ARM_CLK>; |
| 113 |
clock-frequency = <1800000000>; |
| 114 |
cci-control-port = <&cci_control1>; |
| 115 |
operating-points-v2 = <&cluster_a15_opp_table>; |
| 116 |
#cooling-cells = <2>; /* min followed by max */ |
| 117 |
capacity-dmips-mhz = <1024>; |
| 118 |
dynamic-power-coefficient = <310>; |
| 119 |
}; |
| 120 |
|
| 121 |
cpu5: cpu@1 { |
| 122 |
device_type = "cpu"; |
| 123 |
compatible = "arm,cortex-a15"; |
| 124 |
reg = <0x1>; |
| 125 |
clocks = <&clock CLK_ARM_CLK>; |
| 126 |
clock-frequency = <1800000000>; |
| 127 |
cci-control-port = <&cci_control1>; |
| 128 |
operating-points-v2 = <&cluster_a15_opp_table>; |
| 129 |
#cooling-cells = <2>; /* min followed by max */ |
| 130 |
capacity-dmips-mhz = <1024>; |
| 131 |
dynamic-power-coefficient = <310>; |
| 132 |
}; |
| 133 |
|
| 134 |
cpu6: cpu@2 { |
| 135 |
device_type = "cpu"; |
| 136 |
compatible = "arm,cortex-a15"; |
| 137 |
reg = <0x2>; |
| 138 |
clocks = <&clock CLK_ARM_CLK>; |
| 139 |
clock-frequency = <1800000000>; |
| 140 |
cci-control-port = <&cci_control1>; |
| 141 |
operating-points-v2 = <&cluster_a15_opp_table>; |
| 142 |
#cooling-cells = <2>; /* min followed by max */ |
| 143 |
capacity-dmips-mhz = <1024>; |
| 144 |
dynamic-power-coefficient = <310>; |
| 145 |
}; |
| 146 |
|
| 147 |
cpu7: cpu@3 { |
| 148 |
device_type = "cpu"; |
| 149 |
compatible = "arm,cortex-a15"; |
| 150 |
reg = <0x3>; |
| 151 |
clocks = <&clock CLK_ARM_CLK>; |
| 152 |
clock-frequency = <1800000000>; |
| 153 |
cci-control-port = <&cci_control1>; |
| 154 |
operating-points-v2 = <&cluster_a15_opp_table>; |
| 155 |
#cooling-cells = <2>; /* min followed by max */ |
| 156 |
capacity-dmips-mhz = <1024>; |
| 157 |
dynamic-power-coefficient = <310>; |
| 158 |
}; |
| 159 |
}; |
| 160 |
}; |
| 161 |
|
| 162 |
&arm_a7_pmu { |
| 163 |
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| 164 |
status = "okay"; |
| 165 |
}; |
| 166 |
|
| 167 |
&arm_a15_pmu { |
| 168 |
interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; |
| 169 |
status = "okay"; |
| 170 |
}; |