| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung S3C6410 based SMDK6410 board device tree source. |
| 4 |
* |
| 5 |
* Copyright (c) 2013 Tomasz Figa <[email protected]> |
| 6 |
* |
| 7 |
* Device tree source file for Samsung SMDK6410 board which is based on |
| 8 |
* Samsung's S3C6410 SoC. |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
|
| 13 |
#include <dt-bindings/gpio/gpio.h> |
| 14 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 15 |
|
| 16 |
#include "s3c6410.dtsi" |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "Samsung SMDK6410 board based on S3C6410"; |
| 20 |
compatible = "samsung,smdk6410", "samsung,s3c6410"; |
| 21 |
|
| 22 |
memory@50000000 { |
| 23 |
device_type = "memory"; |
| 24 |
reg = <0x50000000 0x8000000>; |
| 25 |
}; |
| 26 |
|
| 27 |
chosen { |
| 28 |
bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; |
| 29 |
}; |
| 30 |
|
| 31 |
fin_pll: oscillator-0 { |
| 32 |
compatible = "fixed-clock"; |
| 33 |
clock-frequency = <12000000>; |
| 34 |
clock-output-names = "fin_pll"; |
| 35 |
#clock-cells = <0>; |
| 36 |
}; |
| 37 |
|
| 38 |
xusbxti: oscillator-1 { |
| 39 |
compatible = "fixed-clock"; |
| 40 |
clock-output-names = "xusbxti"; |
| 41 |
clock-frequency = <48000000>; |
| 42 |
#clock-cells = <0>; |
| 43 |
}; |
| 44 |
|
| 45 |
srom-cs1-bus@18000000 { |
| 46 |
compatible = "simple-bus"; |
| 47 |
#address-cells = <1>; |
| 48 |
#size-cells = <1>; |
| 49 |
reg = <0x18000000 0x8000000>; |
| 50 |
ranges; |
| 51 |
|
| 52 |
ethernet@18000000 { |
| 53 |
compatible = "smsc,lan9115"; |
| 54 |
reg = <0x18000000 0x10000>; |
| 55 |
interrupt-parent = <&gpn>; |
| 56 |
interrupts = <10 IRQ_TYPE_LEVEL_LOW>; |
| 57 |
phy-mode = "mii"; |
| 58 |
reg-io-width = <4>; |
| 59 |
smsc,force-internal-phy; |
| 60 |
}; |
| 61 |
}; |
| 62 |
}; |
| 63 |
|
| 64 |
&clocks { |
| 65 |
clocks = <&fin_pll>; |
| 66 |
}; |
| 67 |
|
| 68 |
&sdhci0 { |
| 69 |
pinctrl-names = "default"; |
| 70 |
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; |
| 71 |
bus-width = <4>; |
| 72 |
status = "okay"; |
| 73 |
}; |
| 74 |
|
| 75 |
&uart0 { |
| 76 |
pinctrl-names = "default"; |
| 77 |
pinctrl-0 = <&uart0_data>, <&uart0_fctl>; |
| 78 |
status = "okay"; |
| 79 |
}; |
| 80 |
|
| 81 |
&uart1 { |
| 82 |
pinctrl-names = "default"; |
| 83 |
pinctrl-0 = <&uart1_data>; |
| 84 |
status = "okay"; |
| 85 |
}; |
| 86 |
|
| 87 |
&uart2 { |
| 88 |
pinctrl-names = "default"; |
| 89 |
pinctrl-0 = <&uart2_data>; |
| 90 |
status = "okay"; |
| 91 |
}; |
| 92 |
|
| 93 |
&uart3 { |
| 94 |
pinctrl-names = "default"; |
| 95 |
pinctrl-0 = <&uart3_data>; |
| 96 |
status = "okay"; |
| 97 |
}; |