| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung Exynos5410 SoC device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
* |
| 8 |
* Samsung Exynos5410 SoC device nodes are listed in this file. |
| 9 |
* Exynos5410 based board files can include this file and provide |
| 10 |
* values for board specific bindings. |
| 11 |
*/ |
| 12 |
|
| 13 |
#include "exynos54xx.dtsi" |
| 14 |
#include <dt-bindings/clock/exynos5410.h> |
| 15 |
#include <dt-bindings/clock/exynos-audss-clk.h> |
| 16 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 17 |
|
| 18 |
/ { |
| 19 |
compatible = "samsung,exynos5410", "samsung,exynos5"; |
| 20 |
interrupt-parent = <&gic>; |
| 21 |
|
| 22 |
aliases { |
| 23 |
pinctrl0 = &pinctrl_0; |
| 24 |
pinctrl1 = &pinctrl_1; |
| 25 |
pinctrl2 = &pinctrl_2; |
| 26 |
pinctrl3 = &pinctrl_3; |
| 27 |
}; |
| 28 |
|
| 29 |
cpus { |
| 30 |
#address-cells = <1>; |
| 31 |
#size-cells = <0>; |
| 32 |
|
| 33 |
cpu0: cpu@0 { |
| 34 |
device_type = "cpu"; |
| 35 |
compatible = "arm,cortex-a15"; |
| 36 |
reg = <0x0>; |
| 37 |
clock-frequency = <1600000000>; |
| 38 |
}; |
| 39 |
|
| 40 |
cpu1: cpu@1 { |
| 41 |
device_type = "cpu"; |
| 42 |
compatible = "arm,cortex-a15"; |
| 43 |
reg = <0x1>; |
| 44 |
clock-frequency = <1600000000>; |
| 45 |
}; |
| 46 |
|
| 47 |
cpu2: cpu@2 { |
| 48 |
device_type = "cpu"; |
| 49 |
compatible = "arm,cortex-a15"; |
| 50 |
reg = <0x2>; |
| 51 |
clock-frequency = <1600000000>; |
| 52 |
}; |
| 53 |
|
| 54 |
cpu3: cpu@3 { |
| 55 |
device_type = "cpu"; |
| 56 |
compatible = "arm,cortex-a15"; |
| 57 |
reg = <0x3>; |
| 58 |
clock-frequency = <1600000000>; |
| 59 |
}; |
| 60 |
}; |
| 61 |
|
| 62 |
soc: soc { |
| 63 |
compatible = "simple-bus"; |
| 64 |
#address-cells = <1>; |
| 65 |
#size-cells = <1>; |
| 66 |
ranges; |
| 67 |
|
| 68 |
pmu_system_controller: system-controller@10040000 { |
| 69 |
compatible = "samsung,exynos5410-pmu", "syscon"; |
| 70 |
reg = <0x10040000 0x5000>; |
| 71 |
clock-names = "clkout16"; |
| 72 |
clocks = <&fin_pll>; |
| 73 |
#clock-cells = <1>; |
| 74 |
}; |
| 75 |
|
| 76 |
clock: clock-controller@10010000 { |
| 77 |
compatible = "samsung,exynos5410-clock"; |
| 78 |
reg = <0x10010000 0x30000>; |
| 79 |
#clock-cells = <1>; |
| 80 |
}; |
| 81 |
|
| 82 |
clock_audss: audss-clock-controller@3810000 { |
| 83 |
compatible = "samsung,exynos5410-audss-clock"; |
| 84 |
reg = <0x03810000 0x0c>; |
| 85 |
#clock-cells = <1>; |
| 86 |
clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>; |
| 87 |
clock-names = "pll_ref", "pll_in"; |
| 88 |
}; |
| 89 |
|
| 90 |
tmu_cpu0: tmu@10060000 { |
| 91 |
compatible = "samsung,exynos5420-tmu"; |
| 92 |
reg = <0x10060000 0x100>; |
| 93 |
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 94 |
clocks = <&clock CLK_TMU>; |
| 95 |
clock-names = "tmu_apbif"; |
| 96 |
#thermal-sensor-cells = <0>; |
| 97 |
}; |
| 98 |
|
| 99 |
tmu_cpu1: tmu@10064000 { |
| 100 |
compatible = "samsung,exynos5420-tmu"; |
| 101 |
reg = <0x10064000 0x100>; |
| 102 |
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; |
| 103 |
clocks = <&clock CLK_TMU>; |
| 104 |
clock-names = "tmu_apbif"; |
| 105 |
#thermal-sensor-cells = <0>; |
| 106 |
}; |
| 107 |
|
| 108 |
tmu_cpu2: tmu@10068000 { |
| 109 |
compatible = "samsung,exynos5420-tmu"; |
| 110 |
reg = <0x10068000 0x100>; |
| 111 |
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; |
| 112 |
clocks = <&clock CLK_TMU>; |
| 113 |
clock-names = "tmu_apbif"; |
| 114 |
#thermal-sensor-cells = <0>; |
| 115 |
}; |
| 116 |
|
| 117 |
tmu_cpu3: tmu@1006c000 { |
| 118 |
compatible = "samsung,exynos5420-tmu"; |
| 119 |
reg = <0x1006c000 0x100>; |
| 120 |
interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; |
| 121 |
clocks = <&clock CLK_TMU>; |
| 122 |
clock-names = "tmu_apbif"; |
| 123 |
#thermal-sensor-cells = <0>; |
| 124 |
}; |
| 125 |
|
| 126 |
mmc_0: mmc@12200000 { |
| 127 |
compatible = "samsung,exynos5250-dw-mshc"; |
| 128 |
reg = <0x12200000 0x1000>; |
| 129 |
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| 130 |
#address-cells = <1>; |
| 131 |
#size-cells = <0>; |
| 132 |
clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; |
| 133 |
clock-names = "biu", "ciu"; |
| 134 |
fifo-depth = <0x80>; |
| 135 |
status = "disabled"; |
| 136 |
}; |
| 137 |
|
| 138 |
mmc_1: mmc@12210000 { |
| 139 |
compatible = "samsung,exynos5250-dw-mshc"; |
| 140 |
reg = <0x12210000 0x1000>; |
| 141 |
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| 142 |
#address-cells = <1>; |
| 143 |
#size-cells = <0>; |
| 144 |
clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; |
| 145 |
clock-names = "biu", "ciu"; |
| 146 |
fifo-depth = <0x80>; |
| 147 |
status = "disabled"; |
| 148 |
}; |
| 149 |
|
| 150 |
mmc_2: mmc@12220000 { |
| 151 |
compatible = "samsung,exynos5250-dw-mshc"; |
| 152 |
reg = <0x12220000 0x1000>; |
| 153 |
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| 154 |
#address-cells = <1>; |
| 155 |
#size-cells = <0>; |
| 156 |
clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; |
| 157 |
clock-names = "biu", "ciu"; |
| 158 |
fifo-depth = <0x80>; |
| 159 |
status = "disabled"; |
| 160 |
}; |
| 161 |
|
| 162 |
pinctrl_0: pinctrl@13400000 { |
| 163 |
compatible = "samsung,exynos5410-pinctrl"; |
| 164 |
reg = <0x13400000 0x1000>; |
| 165 |
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| 166 |
|
| 167 |
wakeup-interrupt-controller { |
| 168 |
compatible = "samsung,exynos4210-wakeup-eint"; |
| 169 |
interrupt-parent = <&gic>; |
| 170 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 171 |
}; |
| 172 |
}; |
| 173 |
|
| 174 |
pinctrl_1: pinctrl@14000000 { |
| 175 |
compatible = "samsung,exynos5410-pinctrl"; |
| 176 |
reg = <0x14000000 0x1000>; |
| 177 |
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| 178 |
}; |
| 179 |
|
| 180 |
pinctrl_2: pinctrl@10d10000 { |
| 181 |
compatible = "samsung,exynos5410-pinctrl"; |
| 182 |
reg = <0x10d10000 0x1000>; |
| 183 |
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 184 |
}; |
| 185 |
|
| 186 |
pinctrl_3: pinctrl@3860000 { |
| 187 |
compatible = "samsung,exynos5410-pinctrl"; |
| 188 |
reg = <0x03860000 0x1000>; |
| 189 |
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| 190 |
}; |
| 191 |
|
| 192 |
pdma0: dma-controller@121a0000 { |
| 193 |
compatible = "arm,pl330", "arm,primecell"; |
| 194 |
reg = <0x121a0000 0x1000>; |
| 195 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 196 |
clocks = <&clock CLK_PDMA0>; |
| 197 |
clock-names = "apb_pclk"; |
| 198 |
#dma-cells = <1>; |
| 199 |
}; |
| 200 |
|
| 201 |
pdma1: dma-controller@121b0000 { |
| 202 |
compatible = "arm,pl330", "arm,primecell"; |
| 203 |
reg = <0x121b0000 0x1000>; |
| 204 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 205 |
clocks = <&clock CLK_PDMA1>; |
| 206 |
clock-names = "apb_pclk"; |
| 207 |
#dma-cells = <1>; |
| 208 |
}; |
| 209 |
|
| 210 |
audi2s0: i2s@3830000 { |
| 211 |
compatible = "samsung,exynos5420-i2s"; |
| 212 |
reg = <0x03830000 0x100>; |
| 213 |
dmas = <&pdma0 10>, |
| 214 |
<&pdma0 9>, |
| 215 |
<&pdma0 8>; |
| 216 |
dma-names = "tx", "rx", "tx-sec"; |
| 217 |
clocks = <&clock_audss EXYNOS_I2S_BUS>, |
| 218 |
<&clock_audss EXYNOS_I2S_BUS>, |
| 219 |
<&clock_audss EXYNOS_SCLK_I2S>; |
| 220 |
clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; |
| 221 |
#clock-cells = <1>; |
| 222 |
clock-output-names = "i2s_cdclk0"; |
| 223 |
#sound-dai-cells = <1>; |
| 224 |
samsung,idma-addr = <0x03000000>; |
| 225 |
pinctrl-names = "default"; |
| 226 |
pinctrl-0 = <&audi2s0_bus>; |
| 227 |
status = "disabled"; |
| 228 |
}; |
| 229 |
}; |
| 230 |
|
| 231 |
thermal-zones { |
| 232 |
cpu0_thermal: cpu0-thermal { |
| 233 |
thermal-sensors = <&tmu_cpu0>; |
| 234 |
#include "exynos5420-trip-points.dtsi" |
| 235 |
}; |
| 236 |
cpu1_thermal: cpu1-thermal { |
| 237 |
thermal-sensors = <&tmu_cpu1>; |
| 238 |
#include "exynos5420-trip-points.dtsi" |
| 239 |
}; |
| 240 |
cpu2_thermal: cpu2-thermal { |
| 241 |
thermal-sensors = <&tmu_cpu2>; |
| 242 |
#include "exynos5420-trip-points.dtsi" |
| 243 |
}; |
| 244 |
cpu3_thermal: cpu3-thermal { |
| 245 |
thermal-sensors = <&tmu_cpu3>; |
| 246 |
#include "exynos5420-trip-points.dtsi" |
| 247 |
}; |
| 248 |
}; |
| 249 |
}; |
| 250 |
|
| 251 |
&adc { |
| 252 |
clocks = <&clock CLK_TSADC>; |
| 253 |
clock-names = "adc"; |
| 254 |
samsung,syscon-phandle = <&pmu_system_controller>; |
| 255 |
}; |
| 256 |
|
| 257 |
&arm_a15_pmu { |
| 258 |
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; |
| 259 |
status = "okay"; |
| 260 |
}; |
| 261 |
|
| 262 |
&i2c_0 { |
| 263 |
clocks = <&clock CLK_I2C0>; |
| 264 |
clock-names = "i2c"; |
| 265 |
pinctrl-names = "default"; |
| 266 |
pinctrl-0 = <&i2c0_bus>; |
| 267 |
}; |
| 268 |
|
| 269 |
&i2c_1 { |
| 270 |
clocks = <&clock CLK_I2C1>; |
| 271 |
clock-names = "i2c"; |
| 272 |
pinctrl-names = "default"; |
| 273 |
pinctrl-0 = <&i2c1_bus>; |
| 274 |
}; |
| 275 |
|
| 276 |
&i2c_2 { |
| 277 |
clocks = <&clock CLK_I2C2>; |
| 278 |
clock-names = "i2c"; |
| 279 |
pinctrl-names = "default"; |
| 280 |
pinctrl-0 = <&i2c2_bus>; |
| 281 |
}; |
| 282 |
|
| 283 |
&i2c_3 { |
| 284 |
clocks = <&clock CLK_I2C3>; |
| 285 |
clock-names = "i2c"; |
| 286 |
pinctrl-names = "default"; |
| 287 |
pinctrl-0 = <&i2c3_bus>; |
| 288 |
}; |
| 289 |
|
| 290 |
&hsi2c_4 { |
| 291 |
clocks = <&clock CLK_USI0>; |
| 292 |
clock-names = "hsi2c"; |
| 293 |
pinctrl-names = "default"; |
| 294 |
pinctrl-0 = <&i2c4_hs_bus>; |
| 295 |
}; |
| 296 |
|
| 297 |
&hsi2c_5 { |
| 298 |
clocks = <&clock CLK_USI1>; |
| 299 |
clock-names = "hsi2c"; |
| 300 |
pinctrl-names = "default"; |
| 301 |
pinctrl-0 = <&i2c5_hs_bus>; |
| 302 |
}; |
| 303 |
|
| 304 |
&hsi2c_6 { |
| 305 |
clocks = <&clock CLK_USI2>; |
| 306 |
clock-names = "hsi2c"; |
| 307 |
pinctrl-names = "default"; |
| 308 |
pinctrl-0 = <&i2c6_hs_bus>; |
| 309 |
}; |
| 310 |
|
| 311 |
&hsi2c_7 { |
| 312 |
clocks = <&clock CLK_USI3>; |
| 313 |
clock-names = "hsi2c"; |
| 314 |
pinctrl-names = "default"; |
| 315 |
pinctrl-0 = <&i2c7_hs_bus>; |
| 316 |
}; |
| 317 |
|
| 318 |
&mct { |
| 319 |
clocks = <&fin_pll>, <&clock CLK_MCT>; |
| 320 |
clock-names = "fin_pll", "mct"; |
| 321 |
}; |
| 322 |
|
| 323 |
&prng { |
| 324 |
clocks = <&clock CLK_SSS>; |
| 325 |
clock-names = "secss"; |
| 326 |
}; |
| 327 |
|
| 328 |
&pwm { |
| 329 |
clocks = <&clock CLK_PWM>; |
| 330 |
clock-names = "timers"; |
| 331 |
}; |
| 332 |
|
| 333 |
&rtc { |
| 334 |
clocks = <&clock CLK_RTC>; |
| 335 |
clock-names = "rtc"; |
| 336 |
status = "disabled"; |
| 337 |
}; |
| 338 |
|
| 339 |
&serial_0 { |
| 340 |
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; |
| 341 |
clock-names = "uart", "clk_uart_baud0"; |
| 342 |
dmas = <&pdma0 13>, <&pdma0 14>; |
| 343 |
dma-names = "rx", "tx"; |
| 344 |
}; |
| 345 |
|
| 346 |
&serial_1 { |
| 347 |
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; |
| 348 |
clock-names = "uart", "clk_uart_baud0"; |
| 349 |
dmas = <&pdma1 15>, <&pdma1 16>; |
| 350 |
dma-names = "rx", "tx"; |
| 351 |
}; |
| 352 |
|
| 353 |
&serial_2 { |
| 354 |
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; |
| 355 |
clock-names = "uart", "clk_uart_baud0"; |
| 356 |
dmas = <&pdma0 15>, <&pdma0 16>; |
| 357 |
dma-names = "rx", "tx"; |
| 358 |
}; |
| 359 |
|
| 360 |
&serial_3 { |
| 361 |
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; |
| 362 |
clock-names = "uart", "clk_uart_baud0"; |
| 363 |
dmas = <&pdma1 17>, <&pdma1 18>; |
| 364 |
dma-names = "rx", "tx"; |
| 365 |
}; |
| 366 |
|
| 367 |
&sss { |
| 368 |
clocks = <&clock CLK_SSS>; |
| 369 |
clock-names = "secss"; |
| 370 |
}; |
| 371 |
|
| 372 |
&sromc { |
| 373 |
#address-cells = <2>; |
| 374 |
#size-cells = <1>; |
| 375 |
ranges = <0 0 0x04000000 0x20000>, |
| 376 |
<1 0 0x05000000 0x20000>, |
| 377 |
<2 0 0x06000000 0x20000>, |
| 378 |
<3 0 0x07000000 0x20000>; |
| 379 |
}; |
| 380 |
|
| 381 |
&trng { |
| 382 |
clocks = <&clock CLK_SSS>; |
| 383 |
clock-names = "secss"; |
| 384 |
}; |
| 385 |
|
| 386 |
&usbdrd3_0 { |
| 387 |
clocks = <&clock CLK_USBD300>; |
| 388 |
clock-names = "usbdrd30"; |
| 389 |
pinctrl-names = "default"; |
| 390 |
pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>; |
| 391 |
}; |
| 392 |
|
| 393 |
&usbdrd_phy0 { |
| 394 |
clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; |
| 395 |
clock-names = "phy", "ref"; |
| 396 |
samsung,pmu-syscon = <&pmu_system_controller>; |
| 397 |
}; |
| 398 |
|
| 399 |
&usbdrd3_1 { |
| 400 |
clocks = <&clock CLK_USBD301>; |
| 401 |
clock-names = "usbdrd30"; |
| 402 |
pinctrl-names = "default"; |
| 403 |
pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>; |
| 404 |
}; |
| 405 |
|
| 406 |
&usbdrd_dwc3_1 { |
| 407 |
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; |
| 408 |
}; |
| 409 |
|
| 410 |
&usbdrd_phy1 { |
| 411 |
clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; |
| 412 |
clock-names = "phy", "ref"; |
| 413 |
samsung,pmu-syscon = <&pmu_system_controller>; |
| 414 |
}; |
| 415 |
|
| 416 |
&usbhost1 { |
| 417 |
clocks = <&clock CLK_USBH20>; |
| 418 |
clock-names = "usbhost"; |
| 419 |
}; |
| 420 |
|
| 421 |
&usbhost2 { |
| 422 |
clocks = <&clock CLK_USBH20>; |
| 423 |
clock-names = "usbhost"; |
| 424 |
}; |
| 425 |
|
| 426 |
&usb2_phy { |
| 427 |
clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; |
| 428 |
clock-names = "phy", "ref"; |
| 429 |
samsung,sysreg-phandle = <&sysreg_system_controller>; |
| 430 |
samsung,pmureg-phandle = <&pmu_system_controller>; |
| 431 |
}; |
| 432 |
|
| 433 |
&watchdog { |
| 434 |
clocks = <&clock CLK_WDT>; |
| 435 |
clock-names = "watchdog"; |
| 436 |
samsung,syscon-phandle = <&pmu_system_controller>; |
| 437 |
}; |
| 438 |
|
| 439 |
#include "exynos5410-pinctrl.dtsi" |
| 440 |
#include "exynos-syscon-restart.dtsi" |