| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung Exynos5260 SoC device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
*/ |
| 8 |
|
| 9 |
#include <dt-bindings/clock/exynos5260-clk.h> |
| 10 |
#include <dt-bindings/interrupt-controller/arm-gic.h> |
| 11 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 12 |
|
| 13 |
/ { |
| 14 |
compatible = "samsung,exynos5260", "samsung,exynos5"; |
| 15 |
interrupt-parent = <&gic>; |
| 16 |
#address-cells = <1>; |
| 17 |
#size-cells = <1>; |
| 18 |
|
| 19 |
aliases { |
| 20 |
i2c0 = &hsi2c_0; |
| 21 |
i2c1 = &hsi2c_1; |
| 22 |
i2c2 = &hsi2c_2; |
| 23 |
i2c3 = &hsi2c_3; |
| 24 |
pinctrl0 = &pinctrl_0; |
| 25 |
pinctrl1 = &pinctrl_1; |
| 26 |
pinctrl2 = &pinctrl_2; |
| 27 |
serial0 = &uart0; |
| 28 |
serial1 = &uart1; |
| 29 |
serial2 = &uart2; |
| 30 |
serial3 = &uart3; |
| 31 |
}; |
| 32 |
|
| 33 |
cpus { |
| 34 |
#address-cells = <1>; |
| 35 |
#size-cells = <0>; |
| 36 |
|
| 37 |
cpu-map { |
| 38 |
cluster0 { |
| 39 |
core0 { |
| 40 |
cpu = <&cpu0>; |
| 41 |
}; |
| 42 |
core1 { |
| 43 |
cpu = <&cpu1>; |
| 44 |
}; |
| 45 |
}; |
| 46 |
|
| 47 |
cluster1 { |
| 48 |
core0 { |
| 49 |
cpu = <&cpu2>; |
| 50 |
}; |
| 51 |
core1 { |
| 52 |
cpu = <&cpu3>; |
| 53 |
}; |
| 54 |
core2 { |
| 55 |
cpu = <&cpu4>; |
| 56 |
}; |
| 57 |
core3 { |
| 58 |
cpu = <&cpu5>; |
| 59 |
}; |
| 60 |
}; |
| 61 |
}; |
| 62 |
|
| 63 |
cpu0: cpu@0 { |
| 64 |
device_type = "cpu"; |
| 65 |
compatible = "arm,cortex-a15"; |
| 66 |
reg = <0x0>; |
| 67 |
cci-control-port = <&cci_control1>; |
| 68 |
}; |
| 69 |
|
| 70 |
cpu1: cpu@1 { |
| 71 |
device_type = "cpu"; |
| 72 |
compatible = "arm,cortex-a15"; |
| 73 |
reg = <0x1>; |
| 74 |
cci-control-port = <&cci_control1>; |
| 75 |
}; |
| 76 |
|
| 77 |
cpu2: cpu@100 { |
| 78 |
device_type = "cpu"; |
| 79 |
compatible = "arm,cortex-a7"; |
| 80 |
reg = <0x100>; |
| 81 |
cci-control-port = <&cci_control0>; |
| 82 |
}; |
| 83 |
|
| 84 |
cpu3: cpu@101 { |
| 85 |
device_type = "cpu"; |
| 86 |
compatible = "arm,cortex-a7"; |
| 87 |
reg = <0x101>; |
| 88 |
cci-control-port = <&cci_control0>; |
| 89 |
}; |
| 90 |
|
| 91 |
cpu4: cpu@102 { |
| 92 |
device_type = "cpu"; |
| 93 |
compatible = "arm,cortex-a7"; |
| 94 |
reg = <0x102>; |
| 95 |
cci-control-port = <&cci_control0>; |
| 96 |
}; |
| 97 |
|
| 98 |
cpu5: cpu@103 { |
| 99 |
device_type = "cpu"; |
| 100 |
compatible = "arm,cortex-a7"; |
| 101 |
reg = <0x103>; |
| 102 |
cci-control-port = <&cci_control0>; |
| 103 |
}; |
| 104 |
}; |
| 105 |
|
| 106 |
soc: soc { |
| 107 |
compatible = "simple-bus"; |
| 108 |
#address-cells = <1>; |
| 109 |
#size-cells = <1>; |
| 110 |
ranges; |
| 111 |
|
| 112 |
clock_top: clock-controller@10010000 { |
| 113 |
compatible = "samsung,exynos5260-clock-top"; |
| 114 |
reg = <0x10010000 0x10000>; |
| 115 |
#clock-cells = <1>; |
| 116 |
clocks = <&fin_pll>, |
| 117 |
<&clock_mif MIF_DOUT_MEM_PLL>, |
| 118 |
<&clock_mif MIF_DOUT_BUS_PLL>, |
| 119 |
<&clock_mif MIF_DOUT_MEDIA_PLL>; |
| 120 |
clock-names = "fin_pll", |
| 121 |
"dout_mem_pll", |
| 122 |
"dout_bus_pll", |
| 123 |
"dout_media_pll"; |
| 124 |
}; |
| 125 |
|
| 126 |
clock_peri: clock-controller@10200000 { |
| 127 |
compatible = "samsung,exynos5260-clock-peri"; |
| 128 |
reg = <0x10200000 0x10000>; |
| 129 |
#clock-cells = <1>; |
| 130 |
clocks = <&fin_pll>, |
| 131 |
<&ioclk_pcm>, |
| 132 |
<&ioclk_i2s>, |
| 133 |
<&ioclk_spdif>, |
| 134 |
<&fin_pll>, |
| 135 |
<&clock_top TOP_DOUT_ACLK_PERI_66>, |
| 136 |
<&clock_top TOP_DOUT_SCLK_PERI_UART0>, |
| 137 |
<&clock_top TOP_DOUT_SCLK_PERI_UART1>, |
| 138 |
<&clock_top TOP_DOUT_SCLK_PERI_UART2>, |
| 139 |
<&clock_top TOP_DOUT_SCLK_PERI_SPI0_B>, |
| 140 |
<&clock_top TOP_DOUT_SCLK_PERI_SPI1_B>, |
| 141 |
<&clock_top TOP_DOUT_SCLK_PERI_SPI2_B>, |
| 142 |
<&clock_top TOP_DOUT_ACLK_PERI_AUD>; |
| 143 |
clock-names = "fin_pll", |
| 144 |
"ioclk_pcm_extclk", |
| 145 |
"ioclk_i2s_cdclk", |
| 146 |
"ioclk_spdif_extclk", |
| 147 |
"phyclk_hdmi_phy_ref_cko", |
| 148 |
"dout_aclk_peri_66", |
| 149 |
"dout_sclk_peri_uart0", |
| 150 |
"dout_sclk_peri_uart1", |
| 151 |
"dout_sclk_peri_uart2", |
| 152 |
"dout_sclk_peri_spi0_b", |
| 153 |
"dout_sclk_peri_spi1_b", |
| 154 |
"dout_sclk_peri_spi2_b", |
| 155 |
"dout_aclk_peri_aud"; |
| 156 |
}; |
| 157 |
|
| 158 |
clock_egl: clock-controller@10600000 { |
| 159 |
compatible = "samsung,exynos5260-clock-egl"; |
| 160 |
reg = <0x10600000 0x10000>; |
| 161 |
#clock-cells = <1>; |
| 162 |
clocks = <&fin_pll>, |
| 163 |
<&clock_mif MIF_DOUT_BUS_PLL>; |
| 164 |
clock-names = "fin_pll", |
| 165 |
"dout_bus_pll"; |
| 166 |
}; |
| 167 |
|
| 168 |
clock_kfc: clock-controller@10700000 { |
| 169 |
compatible = "samsung,exynos5260-clock-kfc"; |
| 170 |
reg = <0x10700000 0x10000>; |
| 171 |
#clock-cells = <1>; |
| 172 |
clocks = <&fin_pll>, |
| 173 |
<&clock_mif MIF_DOUT_MEDIA_PLL>; |
| 174 |
clock-names = "fin_pll", |
| 175 |
"dout_media_pll"; |
| 176 |
}; |
| 177 |
|
| 178 |
clock_g2d: clock-controller@10a00000 { |
| 179 |
compatible = "samsung,exynos5260-clock-g2d"; |
| 180 |
reg = <0x10a00000 0x10000>; |
| 181 |
#clock-cells = <1>; |
| 182 |
clocks = <&fin_pll>, |
| 183 |
<&clock_top TOP_DOUT_ACLK_G2D_333>; |
| 184 |
clock-names = "fin_pll", |
| 185 |
"dout_aclk_g2d_333"; |
| 186 |
}; |
| 187 |
|
| 188 |
clock_mif: clock-controller@10ce0000 { |
| 189 |
compatible = "samsung,exynos5260-clock-mif"; |
| 190 |
reg = <0x10ce0000 0x10000>; |
| 191 |
#clock-cells = <1>; |
| 192 |
clocks = <&fin_pll>; |
| 193 |
clock-names = "fin_pll"; |
| 194 |
}; |
| 195 |
|
| 196 |
clock_mfc: clock-controller@11090000 { |
| 197 |
compatible = "samsung,exynos5260-clock-mfc"; |
| 198 |
reg = <0x11090000 0x10000>; |
| 199 |
#clock-cells = <1>; |
| 200 |
clocks = <&fin_pll>, |
| 201 |
<&clock_top TOP_DOUT_ACLK_MFC_333>; |
| 202 |
clock-names = "fin_pll", |
| 203 |
"dout_aclk_mfc_333"; |
| 204 |
}; |
| 205 |
|
| 206 |
clock_g3d: clock-controller@11830000 { |
| 207 |
compatible = "samsung,exynos5260-clock-g3d"; |
| 208 |
reg = <0x11830000 0x10000>; |
| 209 |
#clock-cells = <1>; |
| 210 |
clocks = <&fin_pll>; |
| 211 |
clock-names = "fin_pll"; |
| 212 |
}; |
| 213 |
|
| 214 |
clock_fsys: clock-controller@122e0000 { |
| 215 |
compatible = "samsung,exynos5260-clock-fsys"; |
| 216 |
reg = <0x122e0000 0x10000>; |
| 217 |
#clock-cells = <1>; |
| 218 |
clocks = <&fin_pll>, |
| 219 |
<&fin_pll>, |
| 220 |
<&fin_pll>, |
| 221 |
<&fin_pll>, |
| 222 |
<&fin_pll>, |
| 223 |
<&fin_pll>, |
| 224 |
<&clock_top TOP_DOUT_ACLK_FSYS_200>; |
| 225 |
clock-names = "fin_pll", |
| 226 |
"phyclk_usbhost20_phy_phyclock", |
| 227 |
"phyclk_usbhost20_phy_freeclk", |
| 228 |
"phyclk_usbhost20_phy_clk48mohci", |
| 229 |
"phyclk_usbdrd30_udrd30_pipe_pclk", |
| 230 |
"phyclk_usbdrd30_udrd30_phyclock", |
| 231 |
"dout_aclk_fsys_200"; |
| 232 |
}; |
| 233 |
|
| 234 |
clock_aud: clock-controller@128c0000 { |
| 235 |
compatible = "samsung,exynos5260-clock-aud"; |
| 236 |
reg = <0x128c0000 0x10000>; |
| 237 |
#clock-cells = <1>; |
| 238 |
clocks = <&fin_pll>, |
| 239 |
<&clock_top TOP_FOUT_AUD_PLL>, |
| 240 |
<&ioclk_i2s>, |
| 241 |
<&ioclk_pcm>; |
| 242 |
clock-names = "fin_pll", |
| 243 |
"fout_aud_pll", |
| 244 |
"ioclk_i2s_cdclk", |
| 245 |
"ioclk_pcm_extclk"; |
| 246 |
}; |
| 247 |
|
| 248 |
clock_isp: clock-controller@133c0000 { |
| 249 |
compatible = "samsung,exynos5260-clock-isp"; |
| 250 |
reg = <0x133c0000 0x10000>; |
| 251 |
#clock-cells = <1>; |
| 252 |
clocks = <&fin_pll>, |
| 253 |
<&clock_top TOP_DOUT_ACLK_ISP1_266>, |
| 254 |
<&clock_top TOP_DOUT_ACLK_ISP1_400>, |
| 255 |
<&clock_top TOP_MOUT_ACLK_ISP1_266>; |
| 256 |
clock-names = "fin_pll", |
| 257 |
"dout_aclk_isp1_266", |
| 258 |
"dout_aclk_isp1_400", |
| 259 |
"mout_aclk_isp1_266"; |
| 260 |
}; |
| 261 |
|
| 262 |
clock_gscl: clock-controller@13f00000 { |
| 263 |
compatible = "samsung,exynos5260-clock-gscl"; |
| 264 |
reg = <0x13f00000 0x10000>; |
| 265 |
#clock-cells = <1>; |
| 266 |
clocks = <&fin_pll>, |
| 267 |
<&clock_top TOP_DOUT_ACLK_GSCL_400>, |
| 268 |
<&clock_top TOP_DOUT_ACLK_GSCL_333>; |
| 269 |
clock-names = "fin_pll", |
| 270 |
"dout_aclk_gscl_400", |
| 271 |
"dout_aclk_gscl_333"; |
| 272 |
}; |
| 273 |
|
| 274 |
clock_disp: clock-controller@14550000 { |
| 275 |
compatible = "samsung,exynos5260-clock-disp"; |
| 276 |
reg = <0x14550000 0x10000>; |
| 277 |
#clock-cells = <1>; |
| 278 |
clocks = <&fin_pll>, |
| 279 |
<&fin_pll>, |
| 280 |
<&fin_pll>, |
| 281 |
<&fin_pll>, |
| 282 |
<&fin_pll>, |
| 283 |
<&fin_pll>, |
| 284 |
<&fin_pll>, |
| 285 |
<&fin_pll>, |
| 286 |
<&fin_pll>, |
| 287 |
<&fin_pll>, |
| 288 |
<&fin_pll>, |
| 289 |
<&fin_pll>, |
| 290 |
<&fin_pll>, |
| 291 |
<&fin_pll>, |
| 292 |
<&ioclk_spdif>, |
| 293 |
<&clock_top TOP_DOUT_ACLK_PERI_AUD>, |
| 294 |
<&clock_top TOP_DOUT_ACLK_DISP_222>, |
| 295 |
<&clock_top TOP_DOUT_SCLK_DISP_PIXEL>, |
| 296 |
<&clock_top TOP_DOUT_ACLK_DISP_333>; |
| 297 |
clock-names = "fin_pll", |
| 298 |
"phyclk_dptx_phy_ch3_txd_clk", |
| 299 |
"phyclk_dptx_phy_ch2_txd_clk", |
| 300 |
"phyclk_dptx_phy_ch1_txd_clk", |
| 301 |
"phyclk_dptx_phy_ch0_txd_clk", |
| 302 |
"phyclk_hdmi_phy_tmds_clko", |
| 303 |
"phyclk_hdmi_phy_ref_clko", |
| 304 |
"phyclk_hdmi_phy_pixel_clko", |
| 305 |
"phyclk_hdmi_link_o_tmds_clkhi", |
| 306 |
"phyclk_mipi_dphy_4l_m_txbyte_clkhs", |
| 307 |
"phyclk_dptx_phy_o_ref_clk_24m", |
| 308 |
"phyclk_dptx_phy_clk_div2", |
| 309 |
"phyclk_mipi_dphy_4l_m_rxclkesc0", |
| 310 |
"phyclk_hdmi_phy_ref_cko", |
| 311 |
"ioclk_spdif_extclk", |
| 312 |
"dout_aclk_peri_aud", |
| 313 |
"dout_aclk_disp_222", |
| 314 |
"dout_sclk_disp_pixel", |
| 315 |
"dout_aclk_disp_333"; |
| 316 |
}; |
| 317 |
|
| 318 |
gic: interrupt-controller@10481000 { |
| 319 |
compatible = "arm,gic-400", "arm,cortex-a15-gic"; |
| 320 |
#interrupt-cells = <3>; |
| 321 |
interrupt-controller; |
| 322 |
reg = <0x10481000 0x1000>, |
| 323 |
<0x10482000 0x2000>, |
| 324 |
<0x10484000 0x2000>, |
| 325 |
<0x10486000 0x2000>; |
| 326 |
interrupts = <GIC_PPI 9 |
| 327 |
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| 328 |
}; |
| 329 |
|
| 330 |
chipid: chipid@10000000 { |
| 331 |
compatible = "samsung,exynos4210-chipid"; |
| 332 |
reg = <0x10000000 0x100>; |
| 333 |
}; |
| 334 |
|
| 335 |
mct: timer@100b0000 { |
| 336 |
compatible = "samsung,exynos5260-mct", |
| 337 |
"samsung,exynos4210-mct"; |
| 338 |
reg = <0x100b0000 0x1000>; |
| 339 |
clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; |
| 340 |
clock-names = "fin_pll", "mct"; |
| 341 |
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, |
| 342 |
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, |
| 343 |
<GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, |
| 344 |
<GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, |
| 345 |
<GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, |
| 346 |
<GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, |
| 347 |
<GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, |
| 348 |
<GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| 349 |
<GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, |
| 350 |
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, |
| 351 |
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, |
| 352 |
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; |
| 353 |
}; |
| 354 |
|
| 355 |
cci: cci@10f00000 { |
| 356 |
compatible = "arm,cci-400"; |
| 357 |
#address-cells = <1>; |
| 358 |
#size-cells = <1>; |
| 359 |
reg = <0x10f00000 0x1000>; |
| 360 |
ranges = <0x0 0x10f00000 0x6000>; |
| 361 |
|
| 362 |
cci_control0: slave-if@4000 { |
| 363 |
compatible = "arm,cci-400-ctrl-if"; |
| 364 |
interface-type = "ace"; |
| 365 |
reg = <0x4000 0x1000>; |
| 366 |
}; |
| 367 |
|
| 368 |
cci_control1: slave-if@5000 { |
| 369 |
compatible = "arm,cci-400-ctrl-if"; |
| 370 |
interface-type = "ace"; |
| 371 |
reg = <0x5000 0x1000>; |
| 372 |
}; |
| 373 |
}; |
| 374 |
|
| 375 |
pinctrl_0: pinctrl@11600000 { |
| 376 |
compatible = "samsung,exynos5260-pinctrl"; |
| 377 |
reg = <0x11600000 0x1000>; |
| 378 |
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; |
| 379 |
|
| 380 |
wakeup-interrupt-controller { |
| 381 |
compatible = "samsung,exynos4210-wakeup-eint"; |
| 382 |
interrupt-parent = <&gic>; |
| 383 |
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; |
| 384 |
}; |
| 385 |
}; |
| 386 |
|
| 387 |
pinctrl_1: pinctrl@12290000 { |
| 388 |
compatible = "samsung,exynos5260-pinctrl"; |
| 389 |
reg = <0x12290000 0x1000>; |
| 390 |
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; |
| 391 |
}; |
| 392 |
|
| 393 |
pinctrl_2: pinctrl@128b0000 { |
| 394 |
compatible = "samsung,exynos5260-pinctrl"; |
| 395 |
reg = <0x128b0000 0x1000>; |
| 396 |
interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; |
| 397 |
}; |
| 398 |
|
| 399 |
pmu_system_controller: system-controller@10d50000 { |
| 400 |
compatible = "samsung,exynos5260-pmu", "syscon"; |
| 401 |
reg = <0x10d50000 0x10000>; |
| 402 |
}; |
| 403 |
|
| 404 |
uart0: serial@12c00000 { |
| 405 |
compatible = "samsung,exynos4210-uart"; |
| 406 |
reg = <0x12c00000 0x100>; |
| 407 |
interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; |
| 408 |
clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>; |
| 409 |
clock-names = "uart", "clk_uart_baud0"; |
| 410 |
status = "disabled"; |
| 411 |
}; |
| 412 |
|
| 413 |
uart1: serial@12c10000 { |
| 414 |
compatible = "samsung,exynos4210-uart"; |
| 415 |
reg = <0x12c10000 0x100>; |
| 416 |
interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; |
| 417 |
clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>; |
| 418 |
clock-names = "uart", "clk_uart_baud0"; |
| 419 |
status = "disabled"; |
| 420 |
}; |
| 421 |
|
| 422 |
uart2: serial@12c20000 { |
| 423 |
compatible = "samsung,exynos4210-uart"; |
| 424 |
reg = <0x12c20000 0x100>; |
| 425 |
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; |
| 426 |
clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>; |
| 427 |
clock-names = "uart", "clk_uart_baud0"; |
| 428 |
status = "disabled"; |
| 429 |
}; |
| 430 |
|
| 431 |
uart3: serial@12860000 { |
| 432 |
compatible = "samsung,exynos4210-uart"; |
| 433 |
reg = <0x12860000 0x100>; |
| 434 |
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; |
| 435 |
clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>; |
| 436 |
clock-names = "uart", "clk_uart_baud0"; |
| 437 |
status = "disabled"; |
| 438 |
}; |
| 439 |
|
| 440 |
mmc_0: mmc@12140000 { |
| 441 |
compatible = "samsung,exynos5250-dw-mshc"; |
| 442 |
reg = <0x12140000 0x2000>; |
| 443 |
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; |
| 444 |
#address-cells = <1>; |
| 445 |
#size-cells = <0>; |
| 446 |
clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>; |
| 447 |
clock-names = "biu", "ciu"; |
| 448 |
assigned-clocks = |
| 449 |
<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>, |
| 450 |
<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>, |
| 451 |
<&clock_top TOP_SCLK_MMC0>; |
| 452 |
assigned-clock-parents = |
| 453 |
<&clock_top TOP_MOUT_BUSTOP_PLL_USER>, |
| 454 |
<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>; |
| 455 |
assigned-clock-rates = <0>, <0>, <800000000>; |
| 456 |
fifo-depth = <64>; |
| 457 |
status = "disabled"; |
| 458 |
}; |
| 459 |
|
| 460 |
mmc_1: mmc@12150000 { |
| 461 |
compatible = "samsung,exynos5250-dw-mshc"; |
| 462 |
reg = <0x12150000 0x2000>; |
| 463 |
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; |
| 464 |
#address-cells = <1>; |
| 465 |
#size-cells = <0>; |
| 466 |
clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>; |
| 467 |
clock-names = "biu", "ciu"; |
| 468 |
assigned-clocks = |
| 469 |
<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>, |
| 470 |
<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>, |
| 471 |
<&clock_top TOP_SCLK_MMC1>; |
| 472 |
assigned-clock-parents = |
| 473 |
<&clock_top TOP_MOUT_BUSTOP_PLL_USER>, |
| 474 |
<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>; |
| 475 |
assigned-clock-rates = <0>, <0>, <800000000>; |
| 476 |
fifo-depth = <64>; |
| 477 |
status = "disabled"; |
| 478 |
}; |
| 479 |
|
| 480 |
mmc_2: mmc@12160000 { |
| 481 |
compatible = "samsung,exynos5250-dw-mshc"; |
| 482 |
reg = <0x12160000 0x2000>; |
| 483 |
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; |
| 484 |
#address-cells = <1>; |
| 485 |
#size-cells = <0>; |
| 486 |
clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>; |
| 487 |
clock-names = "biu", "ciu"; |
| 488 |
assigned-clocks = |
| 489 |
<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>, |
| 490 |
<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>, |
| 491 |
<&clock_top TOP_SCLK_MMC2>; |
| 492 |
assigned-clock-parents = |
| 493 |
<&clock_top TOP_MOUT_BUSTOP_PLL_USER>, |
| 494 |
<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>; |
| 495 |
assigned-clock-rates = <0>, <0>, <800000000>; |
| 496 |
fifo-depth = <64>; |
| 497 |
status = "disabled"; |
| 498 |
}; |
| 499 |
|
| 500 |
hsi2c_0: i2c@12da0000 { |
| 501 |
compatible = "samsung,exynos5260-hsi2c"; |
| 502 |
reg = <0x12da0000 0x1000>; |
| 503 |
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| 504 |
#address-cells = <1>; |
| 505 |
#size-cells = <0>; |
| 506 |
pinctrl-names = "default"; |
| 507 |
pinctrl-0 = <&i2c0_hs_bus>; |
| 508 |
clocks = <&clock_peri PERI_CLK_HSIC0>; |
| 509 |
clock-names = "hsi2c"; |
| 510 |
status = "disabled"; |
| 511 |
}; |
| 512 |
|
| 513 |
hsi2c_1: i2c@12db0000 { |
| 514 |
compatible = "samsung,exynos5260-hsi2c"; |
| 515 |
reg = <0x12db0000 0x1000>; |
| 516 |
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| 517 |
#address-cells = <1>; |
| 518 |
#size-cells = <0>; |
| 519 |
pinctrl-names = "default"; |
| 520 |
pinctrl-0 = <&i2c1_hs_bus>; |
| 521 |
clocks = <&clock_peri PERI_CLK_HSIC1>; |
| 522 |
clock-names = "hsi2c"; |
| 523 |
status = "disabled"; |
| 524 |
}; |
| 525 |
|
| 526 |
hsi2c_2: i2c@12dc0000 { |
| 527 |
compatible = "samsung,exynos5260-hsi2c"; |
| 528 |
reg = <0x12dc0000 0x1000>; |
| 529 |
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| 530 |
#address-cells = <1>; |
| 531 |
#size-cells = <0>; |
| 532 |
pinctrl-names = "default"; |
| 533 |
pinctrl-0 = <&i2c2_hs_bus>; |
| 534 |
clocks = <&clock_peri PERI_CLK_HSIC2>; |
| 535 |
clock-names = "hsi2c"; |
| 536 |
status = "disabled"; |
| 537 |
}; |
| 538 |
|
| 539 |
hsi2c_3: i2c@12dd0000 { |
| 540 |
compatible = "samsung,exynos5260-hsi2c"; |
| 541 |
reg = <0x12dd0000 0x1000>; |
| 542 |
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| 543 |
#address-cells = <1>; |
| 544 |
#size-cells = <0>; |
| 545 |
pinctrl-names = "default"; |
| 546 |
pinctrl-0 = <&i2c3_hs_bus>; |
| 547 |
clocks = <&clock_peri PERI_CLK_HSIC3>; |
| 548 |
clock-names = "hsi2c"; |
| 549 |
status = "disabled"; |
| 550 |
}; |
| 551 |
}; |
| 552 |
}; |
| 553 |
|
| 554 |
#include "exynos5260-pinctrl.dtsi" |