| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung's Exynos4210 based Universal C210 board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
* |
| 8 |
* Device tree source file for Samsung's Universal C210 board which is based on |
| 9 |
* Samsung's Exynos4210 rev0 SoC. |
| 10 |
*/ |
| 11 |
|
| 12 |
/dts-v1/; |
| 13 |
#include "exynos4210.dtsi" |
| 14 |
#include <dt-bindings/gpio/gpio.h> |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Samsung Universal C210 based on Exynos4210 rev0"; |
| 18 |
compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4"; |
| 19 |
chassis-type = "handset"; |
| 20 |
|
| 21 |
memory@40000000 { |
| 22 |
device_type = "memory"; |
| 23 |
reg = <0x40000000 0x10000000 |
| 24 |
0x50000000 0x10000000>; |
| 25 |
}; |
| 26 |
|
| 27 |
aliases { |
| 28 |
mmc0 = &sdhci_0; |
| 29 |
mmc1 = &sdhci_2; |
| 30 |
mmc2 = &sdhci_3; |
| 31 |
}; |
| 32 |
|
| 33 |
chosen { |
| 34 |
bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; |
| 35 |
stdout-path = "serial2:115200n8"; |
| 36 |
}; |
| 37 |
|
| 38 |
|
| 39 |
fixed-rate-clocks { |
| 40 |
xxti { |
| 41 |
compatible = "samsung,clock-xxti"; |
| 42 |
clock-frequency = <0>; |
| 43 |
}; |
| 44 |
|
| 45 |
xusbxti { |
| 46 |
compatible = "samsung,clock-xusbxti"; |
| 47 |
clock-frequency = <24000000>; |
| 48 |
}; |
| 49 |
|
| 50 |
pmic_ap_clk: pmic-ap-clk { |
| 51 |
/* Workaround for missing clock on PMIC */ |
| 52 |
compatible = "fixed-clock"; |
| 53 |
#clock-cells = <0>; |
| 54 |
clock-frequency = <32768>; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
vemmc_reg: voltage-regulator { |
| 59 |
compatible = "regulator-fixed"; |
| 60 |
regulator-name = "VMEM_VDD_2_8V"; |
| 61 |
regulator-min-microvolt = <2800000>; |
| 62 |
regulator-max-microvolt = <2800000>; |
| 63 |
gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>; |
| 64 |
enable-active-high; |
| 65 |
}; |
| 66 |
|
| 67 |
wlan_pwrseq: sdhci3-pwrseq { |
| 68 |
compatible = "mmc-pwrseq-simple"; |
| 69 |
reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>; |
| 70 |
}; |
| 71 |
|
| 72 |
gpio-keys { |
| 73 |
compatible = "gpio-keys"; |
| 74 |
|
| 75 |
vol-up-key { |
| 76 |
gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; |
| 77 |
linux,code = <115>; |
| 78 |
label = "volume up"; |
| 79 |
debounce-interval = <1>; |
| 80 |
}; |
| 81 |
|
| 82 |
vol-down-key { |
| 83 |
gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; |
| 84 |
linux,code = <114>; |
| 85 |
label = "volume down"; |
| 86 |
debounce-interval = <1>; |
| 87 |
}; |
| 88 |
|
| 89 |
config-key { |
| 90 |
gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; |
| 91 |
linux,code = <171>; |
| 92 |
label = "config"; |
| 93 |
debounce-interval = <1>; |
| 94 |
wakeup-source; |
| 95 |
}; |
| 96 |
|
| 97 |
camera-key { |
| 98 |
gpios = <&gpx2 3 GPIO_ACTIVE_LOW>; |
| 99 |
linux,code = <212>; |
| 100 |
label = "camera"; |
| 101 |
debounce-interval = <1>; |
| 102 |
}; |
| 103 |
|
| 104 |
power-key { |
| 105 |
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
| 106 |
linux,code = <116>; |
| 107 |
label = "power"; |
| 108 |
debounce-interval = <1>; |
| 109 |
wakeup-source; |
| 110 |
}; |
| 111 |
|
| 112 |
ok-key { |
| 113 |
gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; |
| 114 |
linux,code = <352>; |
| 115 |
label = "ok"; |
| 116 |
debounce-interval = <1>; |
| 117 |
}; |
| 118 |
}; |
| 119 |
|
| 120 |
tsp_reg: voltage-regulator { |
| 121 |
compatible = "regulator-fixed"; |
| 122 |
regulator-name = "TSP_2_8V"; |
| 123 |
regulator-min-microvolt = <2800000>; |
| 124 |
regulator-max-microvolt = <2800000>; |
| 125 |
gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>; |
| 126 |
enable-active-high; |
| 127 |
}; |
| 128 |
|
| 129 |
spi-3 { |
| 130 |
compatible = "spi-gpio"; |
| 131 |
#address-cells = <1>; |
| 132 |
#size-cells = <0>; |
| 133 |
|
| 134 |
sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>; |
| 135 |
mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>; |
| 136 |
num-chipselects = <1>; |
| 137 |
cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>; |
| 138 |
|
| 139 |
lcd@0 { |
| 140 |
compatible = "samsung,ld9040"; |
| 141 |
reg = <0>; |
| 142 |
vdd3-supply = <&ldo7_reg>; |
| 143 |
vci-supply = <&ldo17_reg>; |
| 144 |
reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; |
| 145 |
spi-max-frequency = <1200000>; |
| 146 |
power-on-delay = <10>; |
| 147 |
reset-delay = <10>; |
| 148 |
panel-width-mm = <90>; |
| 149 |
panel-height-mm = <154>; |
| 150 |
display-timings { |
| 151 |
timing { |
| 152 |
clock-frequency = <23492370>; |
| 153 |
hactive = <480>; |
| 154 |
vactive = <800>; |
| 155 |
hback-porch = <16>; |
| 156 |
hfront-porch = <16>; |
| 157 |
vback-porch = <2>; |
| 158 |
vfront-porch = <28>; |
| 159 |
hsync-len = <2>; |
| 160 |
vsync-len = <1>; |
| 161 |
hsync-active = <0>; |
| 162 |
vsync-active = <0>; |
| 163 |
de-active = <0>; |
| 164 |
pixelclk-active = <0>; |
| 165 |
}; |
| 166 |
}; |
| 167 |
port { |
| 168 |
lcd_ep: endpoint { |
| 169 |
remote-endpoint = <&fimd_dpi_ep>; |
| 170 |
}; |
| 171 |
}; |
| 172 |
}; |
| 173 |
}; |
| 174 |
|
| 175 |
hdmi_en: voltage-regulator-hdmi-5v { |
| 176 |
compatible = "regulator-fixed"; |
| 177 |
regulator-name = "HDMI_5V"; |
| 178 |
regulator-min-microvolt = <5000000>; |
| 179 |
regulator-max-microvolt = <5000000>; |
| 180 |
gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>; |
| 181 |
enable-active-high; |
| 182 |
}; |
| 183 |
|
| 184 |
hdmi_ddc: i2c-ddc { |
| 185 |
compatible = "i2c-gpio"; |
| 186 |
sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 187 |
scl-gpios = <&gpe4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 188 |
i2c-gpio,delay-us = <100>; |
| 189 |
#address-cells = <1>; |
| 190 |
#size-cells = <0>; |
| 191 |
|
| 192 |
pinctrl-0 = <&i2c_ddc_bus>; |
| 193 |
pinctrl-names = "default"; |
| 194 |
status = "okay"; |
| 195 |
}; |
| 196 |
}; |
| 197 |
|
| 198 |
&camera { |
| 199 |
status = "okay"; |
| 200 |
}; |
| 201 |
|
| 202 |
&cpu0 { |
| 203 |
cpu0-supply = <&vdd_arm_reg>; |
| 204 |
}; |
| 205 |
|
| 206 |
&cpu_thermal { |
| 207 |
cooling-maps { |
| 208 |
map0 { |
| 209 |
/* Corresponds to 800MHz */ |
| 210 |
cooling-device = <&cpu0 2 2>; |
| 211 |
}; |
| 212 |
map1 { |
| 213 |
/* Corresponds to 200MHz */ |
| 214 |
cooling-device = <&cpu0 4 4>; |
| 215 |
}; |
| 216 |
}; |
| 217 |
}; |
| 218 |
|
| 219 |
&ehci { |
| 220 |
status = "okay"; |
| 221 |
phys = <&exynos_usbphy 1>; |
| 222 |
phy-names = "host"; |
| 223 |
}; |
| 224 |
|
| 225 |
&exynos_usbphy { |
| 226 |
status = "okay"; |
| 227 |
vbus-supply = <&safeout1_reg>; |
| 228 |
}; |
| 229 |
|
| 230 |
&fimc_0 { |
| 231 |
status = "okay"; |
| 232 |
assigned-clocks = <&clock CLK_MOUT_FIMC0>, |
| 233 |
<&clock CLK_SCLK_FIMC0>; |
| 234 |
assigned-clock-parents = <&clock CLK_SCLK_MPLL>; |
| 235 |
assigned-clock-rates = <0>, <160000000>; |
| 236 |
}; |
| 237 |
|
| 238 |
&fimc_1 { |
| 239 |
status = "okay"; |
| 240 |
assigned-clocks = <&clock CLK_MOUT_FIMC1>, |
| 241 |
<&clock CLK_SCLK_FIMC1>; |
| 242 |
assigned-clock-parents = <&clock CLK_SCLK_MPLL>; |
| 243 |
assigned-clock-rates = <0>, <160000000>; |
| 244 |
}; |
| 245 |
|
| 246 |
&fimc_2 { |
| 247 |
status = "okay"; |
| 248 |
assigned-clocks = <&clock CLK_MOUT_FIMC2>, |
| 249 |
<&clock CLK_SCLK_FIMC2>; |
| 250 |
assigned-clock-parents = <&clock CLK_SCLK_MPLL>; |
| 251 |
assigned-clock-rates = <0>, <160000000>; |
| 252 |
}; |
| 253 |
|
| 254 |
&fimc_3 { |
| 255 |
status = "okay"; |
| 256 |
assigned-clocks = <&clock CLK_MOUT_FIMC3>, |
| 257 |
<&clock CLK_SCLK_FIMC3>; |
| 258 |
assigned-clock-parents = <&clock CLK_SCLK_MPLL>; |
| 259 |
assigned-clock-rates = <0>, <160000000>; |
| 260 |
}; |
| 261 |
|
| 262 |
&fimd { |
| 263 |
pinctrl-0 = <&lcd_clk>, <&lcd_data24>; |
| 264 |
pinctrl-names = "default"; |
| 265 |
status = "okay"; |
| 266 |
samsung,invert-vden; |
| 267 |
samsung,invert-vclk; |
| 268 |
#address-cells = <1>; |
| 269 |
#size-cells = <0>; |
| 270 |
port@3 { |
| 271 |
reg = <3>; |
| 272 |
fimd_dpi_ep: endpoint { |
| 273 |
remote-endpoint = <&lcd_ep>; |
| 274 |
}; |
| 275 |
}; |
| 276 |
}; |
| 277 |
|
| 278 |
&gpu { |
| 279 |
mali-supply = <&buck2_reg>; |
| 280 |
status = "okay"; |
| 281 |
}; |
| 282 |
|
| 283 |
&hdmi { |
| 284 |
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
| 285 |
pinctrl-names = "default"; |
| 286 |
pinctrl-0 = <&hdmi_hpd>; |
| 287 |
hdmi-en-supply = <&hdmi_en>; |
| 288 |
vdd-supply = <&ldo3_reg>; |
| 289 |
vdd_osc-supply = <&ldo4_reg>; |
| 290 |
vdd_pll-supply = <&ldo3_reg>; |
| 291 |
ddc = <&hdmi_ddc>; |
| 292 |
status = "okay"; |
| 293 |
}; |
| 294 |
|
| 295 |
&hsotg { |
| 296 |
vusb_d-supply = <&ldo3_reg>; |
| 297 |
vusb_a-supply = <&ldo8_reg>; |
| 298 |
dr_mode = "peripheral"; |
| 299 |
status = "okay"; |
| 300 |
}; |
| 301 |
|
| 302 |
&i2c_3 { |
| 303 |
samsung,i2c-sda-delay = <100>; |
| 304 |
samsung,i2c-slave-addr = <0x10>; |
| 305 |
samsung,i2c-max-bus-freq = <100000>; |
| 306 |
pinctrl-0 = <&i2c3_bus>; |
| 307 |
pinctrl-names = "default"; |
| 308 |
status = "okay"; |
| 309 |
|
| 310 |
tsp@4a { |
| 311 |
/* TBD: Atmel maXtouch touchscreen */ |
| 312 |
reg = <0x4a>; |
| 313 |
}; |
| 314 |
}; |
| 315 |
|
| 316 |
&i2c_5 { |
| 317 |
samsung,i2c-sda-delay = <100>; |
| 318 |
samsung,i2c-slave-addr = <0x10>; |
| 319 |
samsung,i2c-max-bus-freq = <100000>; |
| 320 |
pinctrl-0 = <&i2c5_bus>; |
| 321 |
pinctrl-names = "default"; |
| 322 |
status = "okay"; |
| 323 |
|
| 324 |
vdd_arm_reg: pmic@60 { |
| 325 |
compatible = "maxim,max8952"; |
| 326 |
reg = <0x60>; |
| 327 |
|
| 328 |
max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>, |
| 329 |
<&gpx0 4 GPIO_ACTIVE_HIGH>; |
| 330 |
max8952,default-mode = <0>; |
| 331 |
max8952,dvs-mode-microvolt = <1250000>, <1200000>, |
| 332 |
<1050000>, <950000>; |
| 333 |
max8952,sync-freq = <0>; |
| 334 |
max8952,ramp-speed = <0>; |
| 335 |
|
| 336 |
regulator-name = "VARM_1.2V_C210"; |
| 337 |
regulator-min-microvolt = <770000>; |
| 338 |
regulator-max-microvolt = <1400000>; |
| 339 |
regulator-always-on; |
| 340 |
regulator-boot-on; |
| 341 |
}; |
| 342 |
|
| 343 |
pmic@66 { |
| 344 |
compatible = "national,lp3974"; |
| 345 |
interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>; |
| 346 |
pinctrl-names = "default"; |
| 347 |
pinctrl-0 = <&lp3974_irq>; |
| 348 |
reg = <0x66>; |
| 349 |
|
| 350 |
max8998,pmic-buck1-default-dvs-idx = <0>; |
| 351 |
max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, |
| 352 |
<&gpx0 6 GPIO_ACTIVE_HIGH>; |
| 353 |
max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, |
| 354 |
<1100000>, <1000000>; |
| 355 |
|
| 356 |
max8998,pmic-buck2-default-dvs-idx = <0>; |
| 357 |
max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>; |
| 358 |
max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; |
| 359 |
|
| 360 |
regulators { |
| 361 |
ldo2_reg: LDO2 { |
| 362 |
regulator-name = "VALIVE_1.2V"; |
| 363 |
regulator-min-microvolt = <1200000>; |
| 364 |
regulator-max-microvolt = <1200000>; |
| 365 |
regulator-always-on; |
| 366 |
}; |
| 367 |
|
| 368 |
ldo3_reg: LDO3 { |
| 369 |
regulator-name = "VUSB+MIPI_1.1V"; |
| 370 |
regulator-min-microvolt = <1100000>; |
| 371 |
regulator-max-microvolt = <1100000>; |
| 372 |
regulator-always-on; |
| 373 |
}; |
| 374 |
|
| 375 |
ldo4_reg: LDO4 { |
| 376 |
regulator-name = "VADC_3.3V"; |
| 377 |
regulator-min-microvolt = <3300000>; |
| 378 |
regulator-max-microvolt = <3300000>; |
| 379 |
}; |
| 380 |
|
| 381 |
ldo5_reg: LDO5 { |
| 382 |
regulator-name = "VTF_2.8V"; |
| 383 |
regulator-min-microvolt = <2800000>; |
| 384 |
regulator-max-microvolt = <2800000>; |
| 385 |
}; |
| 386 |
|
| 387 |
ldo6_reg: LDO6 { |
| 388 |
regulator-name = "LDO6"; |
| 389 |
regulator-min-microvolt = <2000000>; |
| 390 |
regulator-max-microvolt = <2000000>; |
| 391 |
}; |
| 392 |
|
| 393 |
ldo7_reg: LDO7 { |
| 394 |
regulator-name = "VLCD+VMIPI_1.8V"; |
| 395 |
regulator-min-microvolt = <1800000>; |
| 396 |
regulator-max-microvolt = <1800000>; |
| 397 |
}; |
| 398 |
|
| 399 |
ldo8_reg: LDO8 { |
| 400 |
regulator-name = "VUSB+VDAC_3.3V"; |
| 401 |
regulator-min-microvolt = <3300000>; |
| 402 |
regulator-max-microvolt = <3300000>; |
| 403 |
regulator-always-on; |
| 404 |
}; |
| 405 |
|
| 406 |
ldo9_reg: LDO9 { |
| 407 |
regulator-name = "VCC_2.8V"; |
| 408 |
regulator-min-microvolt = <2800000>; |
| 409 |
regulator-max-microvolt = <2800000>; |
| 410 |
regulator-always-on; |
| 411 |
}; |
| 412 |
|
| 413 |
ldo10_reg: LDO10 { |
| 414 |
regulator-name = "VPLL_1.1V"; |
| 415 |
regulator-min-microvolt = <1100000>; |
| 416 |
regulator-max-microvolt = <1100000>; |
| 417 |
regulator-boot-on; |
| 418 |
regulator-always-on; |
| 419 |
}; |
| 420 |
|
| 421 |
ldo11_reg: LDO11 { |
| 422 |
regulator-name = "CAM_AF_3.3V"; |
| 423 |
regulator-min-microvolt = <3300000>; |
| 424 |
regulator-max-microvolt = <3300000>; |
| 425 |
}; |
| 426 |
|
| 427 |
ldo12_reg: LDO12 { |
| 428 |
regulator-name = "PS_2.8V"; |
| 429 |
regulator-min-microvolt = <2800000>; |
| 430 |
regulator-max-microvolt = <2800000>; |
| 431 |
}; |
| 432 |
|
| 433 |
ldo13_reg: LDO13 { |
| 434 |
regulator-name = "VHIC_1.2V"; |
| 435 |
regulator-min-microvolt = <1200000>; |
| 436 |
regulator-max-microvolt = <1200000>; |
| 437 |
}; |
| 438 |
|
| 439 |
ldo14_reg: LDO14 { |
| 440 |
regulator-name = "CAM_I_HOST_1.8V"; |
| 441 |
regulator-min-microvolt = <1800000>; |
| 442 |
regulator-max-microvolt = <1800000>; |
| 443 |
}; |
| 444 |
|
| 445 |
ldo15_reg: LDO15 { |
| 446 |
regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; |
| 447 |
regulator-min-microvolt = <1200000>; |
| 448 |
regulator-max-microvolt = <1200000>; |
| 449 |
}; |
| 450 |
|
| 451 |
ldo16_reg: LDO16 { |
| 452 |
regulator-name = "CAM_S_ANA_2.8V"; |
| 453 |
regulator-min-microvolt = <2800000>; |
| 454 |
regulator-max-microvolt = <2800000>; |
| 455 |
}; |
| 456 |
|
| 457 |
ldo17_reg: LDO17 { |
| 458 |
regulator-name = "VCC_3.0V_LCD"; |
| 459 |
regulator-min-microvolt = <3000000>; |
| 460 |
regulator-max-microvolt = <3000000>; |
| 461 |
}; |
| 462 |
|
| 463 |
buck1_reg: BUCK1 { |
| 464 |
regulator-name = "VINT_1.1V"; |
| 465 |
regulator-min-microvolt = <750000>; |
| 466 |
regulator-max-microvolt = <1500000>; |
| 467 |
regulator-boot-on; |
| 468 |
regulator-always-on; |
| 469 |
}; |
| 470 |
|
| 471 |
buck2_reg: BUCK2 { |
| 472 |
regulator-name = "VG3D_1.1V"; |
| 473 |
regulator-min-microvolt = <750000>; |
| 474 |
regulator-max-microvolt = <1500000>; |
| 475 |
regulator-boot-on; |
| 476 |
}; |
| 477 |
|
| 478 |
buck3_reg: BUCK3 { |
| 479 |
regulator-name = "VCC_1.8V"; |
| 480 |
regulator-min-microvolt = <1800000>; |
| 481 |
regulator-max-microvolt = <1800000>; |
| 482 |
regulator-always-on; |
| 483 |
}; |
| 484 |
|
| 485 |
buck4_reg: BUCK4 { |
| 486 |
regulator-name = "VMEM_1.2V"; |
| 487 |
regulator-min-microvolt = <1200000>; |
| 488 |
regulator-max-microvolt = <1200000>; |
| 489 |
regulator-always-on; |
| 490 |
}; |
| 491 |
|
| 492 |
ap32khz_reg: EN32KHz-AP { |
| 493 |
regulator-name = "32KHz AP"; |
| 494 |
regulator-always-on; |
| 495 |
}; |
| 496 |
|
| 497 |
cp32khz_reg: EN32KHz-CP { |
| 498 |
regulator-name = "32KHz CP"; |
| 499 |
}; |
| 500 |
|
| 501 |
vichg_reg: ENVICHG { |
| 502 |
regulator-name = "VICHG"; |
| 503 |
}; |
| 504 |
|
| 505 |
safeout1_reg: ESAFEOUT1 { |
| 506 |
regulator-name = "SAFEOUT1"; |
| 507 |
}; |
| 508 |
|
| 509 |
safeout2_reg: ESAFEOUT2 { |
| 510 |
regulator-name = "SAFEOUT2"; |
| 511 |
regulator-boot-on; |
| 512 |
}; |
| 513 |
}; |
| 514 |
}; |
| 515 |
}; |
| 516 |
|
| 517 |
&i2c_8 { |
| 518 |
status = "okay"; |
| 519 |
}; |
| 520 |
|
| 521 |
&mct { |
| 522 |
status = "disabled"; |
| 523 |
}; |
| 524 |
|
| 525 |
&mdma1 { |
| 526 |
/* Use the secure mdma0 */ |
| 527 |
status = "disabled"; |
| 528 |
}; |
| 529 |
|
| 530 |
&mixer { |
| 531 |
status = "okay"; |
| 532 |
}; |
| 533 |
|
| 534 |
&ohci { |
| 535 |
status = "okay"; |
| 536 |
}; |
| 537 |
|
| 538 |
&pinctrl_1 { |
| 539 |
bt_shutdown: bt-shutdown-pins { |
| 540 |
samsung,pins = "gpe1-4"; |
| 541 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 542 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 543 |
}; |
| 544 |
|
| 545 |
bt_host_wakeup: bt-host-wakeup-pins { |
| 546 |
samsung,pins = "gpx2-6"; |
| 547 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 548 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 549 |
}; |
| 550 |
|
| 551 |
bt_device_wakeup: bt-device-wakeup-pins { |
| 552 |
samsung,pins = "gpx3-1"; |
| 553 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 554 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 555 |
}; |
| 556 |
|
| 557 |
lp3974_irq: lp3974-irq-pins { |
| 558 |
samsung,pins = "gpx0-7", "gpx2-7"; |
| 559 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 560 |
}; |
| 561 |
|
| 562 |
hdmi_hpd: hdmi-hpd-pins { |
| 563 |
samsung,pins = "gpx3-7"; |
| 564 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 565 |
}; |
| 566 |
}; |
| 567 |
|
| 568 |
&pinctrl_0 { |
| 569 |
i2c_ddc_bus: i2c-ddc-bus-pins { |
| 570 |
samsung,pins = "gpe4-2", "gpe4-3"; |
| 571 |
samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| 572 |
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| 573 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 574 |
}; |
| 575 |
}; |
| 576 |
|
| 577 |
&pwm { |
| 578 |
compatible = "samsung,s5p6440-pwm"; |
| 579 |
status = "okay"; |
| 580 |
}; |
| 581 |
|
| 582 |
&rtc { |
| 583 |
status = "okay"; |
| 584 |
clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; |
| 585 |
clock-names = "rtc", "rtc_src"; |
| 586 |
}; |
| 587 |
|
| 588 |
&sdhci_0 { |
| 589 |
bus-width = <8>; |
| 590 |
non-removable; |
| 591 |
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; |
| 592 |
pinctrl-names = "default"; |
| 593 |
vmmc-supply = <&vemmc_reg>; |
| 594 |
status = "okay"; |
| 595 |
}; |
| 596 |
|
| 597 |
&sdhci_2 { |
| 598 |
bus-width = <4>; |
| 599 |
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; |
| 600 |
pinctrl-names = "default"; |
| 601 |
vmmc-supply = <&ldo5_reg>; |
| 602 |
cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; |
| 603 |
status = "okay"; |
| 604 |
}; |
| 605 |
|
| 606 |
&sdhci_3 { |
| 607 |
status = "okay"; |
| 608 |
|
| 609 |
#address-cells = <1>; |
| 610 |
#size-cells = <0>; |
| 611 |
|
| 612 |
non-removable; |
| 613 |
cap-power-off-card; |
| 614 |
bus-width = <4>; |
| 615 |
mmc-pwrseq = <&wlan_pwrseq>; |
| 616 |
vmmc-supply = <&ldo5_reg>; |
| 617 |
|
| 618 |
pinctrl-names = "default"; |
| 619 |
pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; |
| 620 |
|
| 621 |
brcmf: wifi@1 { |
| 622 |
compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac"; |
| 623 |
reg = <1>; |
| 624 |
interrupt-parent = <&gpx2>; |
| 625 |
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; |
| 626 |
interrupt-names = "host-wake"; |
| 627 |
}; |
| 628 |
}; |
| 629 |
|
| 630 |
&serial_0 { |
| 631 |
status = "okay"; |
| 632 |
/delete-property/dmas; |
| 633 |
/delete-property/dma-names; |
| 634 |
pinctrl-0 = <&uart0_data &uart0_fctl>; |
| 635 |
pinctrl-names = "default"; |
| 636 |
|
| 637 |
bluetooth { |
| 638 |
compatible = "brcm,bcm4330-bt"; |
| 639 |
pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; |
| 640 |
pinctrl-names = "default"; |
| 641 |
shutdown-gpios = <&gpe1 4 GPIO_ACTIVE_HIGH>; |
| 642 |
device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; |
| 643 |
host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; |
| 644 |
}; |
| 645 |
}; |
| 646 |
|
| 647 |
&serial_1 { |
| 648 |
status = "okay"; |
| 649 |
/delete-property/dmas; |
| 650 |
/delete-property/dma-names; |
| 651 |
}; |
| 652 |
|
| 653 |
&serial_2 { |
| 654 |
status = "okay"; |
| 655 |
/delete-property/dmas; |
| 656 |
/delete-property/dma-names; |
| 657 |
}; |
| 658 |
|
| 659 |
&serial_3 { |
| 660 |
status = "okay"; |
| 661 |
/delete-property/dmas; |
| 662 |
/delete-property/dma-names; |
| 663 |
}; |
| 664 |
|
| 665 |
&soc { |
| 666 |
mdma0: dma-controller@12840000 { |
| 667 |
compatible = "arm,pl330", "arm,primecell"; |
| 668 |
reg = <0x12840000 0x1000>; |
| 669 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 670 |
clocks = <&clock CLK_MDMA>; |
| 671 |
clock-names = "apb_pclk"; |
| 672 |
#dma-cells = <1>; |
| 673 |
power-domains = <&pd_lcd0>; |
| 674 |
}; |
| 675 |
}; |
| 676 |
|
| 677 |
&sysram { |
| 678 |
smp-sram@0 { |
| 679 |
status = "disabled"; |
| 680 |
}; |
| 681 |
|
| 682 |
smp-sram@5000 { |
| 683 |
compatible = "samsung,exynos4210-sysram"; |
| 684 |
reg = <0x5000 0x1000>; |
| 685 |
}; |
| 686 |
|
| 687 |
smp-sram@1f000 { |
| 688 |
status = "disabled"; |
| 689 |
}; |
| 690 |
}; |