| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* FriendlyARM's Exynos4412 based TINY4412 board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2013 Alex Ling <[email protected]> |
| 6 |
* |
| 7 |
* Device tree source file for FriendlyARM's TINY4412 board which is based on |
| 8 |
* Samsung's Exynos4412 SoC. |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
#include "exynos4412.dtsi" |
| 13 |
#include <dt-bindings/gpio/gpio.h> |
| 14 |
#include <dt-bindings/leds/common.h> |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "FriendlyARM TINY4412 board based on Exynos4412"; |
| 18 |
compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4"; |
| 19 |
|
| 20 |
aliases { |
| 21 |
mmc0 = &sdhci_2; |
| 22 |
}; |
| 23 |
|
| 24 |
chosen { |
| 25 |
stdout-path = &serial_0; |
| 26 |
}; |
| 27 |
|
| 28 |
memory@40000000 { |
| 29 |
device_type = "memory"; |
| 30 |
reg = <0x40000000 0x40000000>; |
| 31 |
}; |
| 32 |
|
| 33 |
leds { |
| 34 |
compatible = "gpio-leds"; |
| 35 |
|
| 36 |
led1 { |
| 37 |
label = "led1"; |
| 38 |
function = LED_FUNCTION_HEARTBEAT; |
| 39 |
gpios = <&gpm4 0 GPIO_ACTIVE_LOW>; |
| 40 |
default-state = "off"; |
| 41 |
linux,default-trigger = "heartbeat"; |
| 42 |
}; |
| 43 |
|
| 44 |
led2 { |
| 45 |
label = "led2"; |
| 46 |
gpios = <&gpm4 1 GPIO_ACTIVE_LOW>; |
| 47 |
default-state = "off"; |
| 48 |
}; |
| 49 |
|
| 50 |
led3 { |
| 51 |
label = "led3"; |
| 52 |
gpios = <&gpm4 2 GPIO_ACTIVE_LOW>; |
| 53 |
default-state = "off"; |
| 54 |
}; |
| 55 |
|
| 56 |
led4 { |
| 57 |
label = "led4"; |
| 58 |
function = LED_FUNCTION_DISK_ACTIVITY; |
| 59 |
gpios = <&gpm4 3 GPIO_ACTIVE_LOW>; |
| 60 |
default-state = "off"; |
| 61 |
linux,default-trigger = "mmc0"; |
| 62 |
}; |
| 63 |
}; |
| 64 |
|
| 65 |
fixed-rate-clocks { |
| 66 |
xxti { |
| 67 |
compatible = "samsung,clock-xxti"; |
| 68 |
clock-frequency = <0>; |
| 69 |
}; |
| 70 |
|
| 71 |
xusbxti { |
| 72 |
compatible = "samsung,clock-xusbxti"; |
| 73 |
clock-frequency = <24000000>; |
| 74 |
}; |
| 75 |
|
| 76 |
pmic_ap_clk: pmic-ap-clk { |
| 77 |
/* Workaround for missing clock on PMIC */ |
| 78 |
compatible = "fixed-clock"; |
| 79 |
#clock-cells = <0>; |
| 80 |
clock-frequency = <32768>; |
| 81 |
}; |
| 82 |
}; |
| 83 |
|
| 84 |
panel { |
| 85 |
compatible = "innolux,at070tn92"; |
| 86 |
power-supply = <&vddq_lcd>; |
| 87 |
|
| 88 |
port { |
| 89 |
panel_input: endpoint { |
| 90 |
remote-endpoint = <&lcdc_output>; |
| 91 |
}; |
| 92 |
}; |
| 93 |
}; |
| 94 |
|
| 95 |
vddq_lcd: regulator-vddq-lcd { |
| 96 |
compatible = "regulator-fixed"; |
| 97 |
regulator-name = "vddq-lcd"; |
| 98 |
regulator-min-microvolt = <1800000>; |
| 99 |
regulator-max-microvolt = <1800000>; |
| 100 |
}; |
| 101 |
}; |
| 102 |
|
| 103 |
&cpu_thermal { |
| 104 |
cooling-maps { |
| 105 |
cooling_map0: map0 { |
| 106 |
/* Corresponds to 800MHz at freq_table */ |
| 107 |
cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, |
| 108 |
<&cpu2 7 7>, <&cpu3 7 7>; |
| 109 |
}; |
| 110 |
cooling_map1: map1 { |
| 111 |
/* Corresponds to 200MHz at freq_table */ |
| 112 |
cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, |
| 113 |
<&cpu2 13 13>, <&cpu3 13 13>; |
| 114 |
}; |
| 115 |
}; |
| 116 |
}; |
| 117 |
|
| 118 |
&fimd { |
| 119 |
pinctrl-0 = <&lcd_clk>, <&lcd_data24>; |
| 120 |
pinctrl-names = "default"; |
| 121 |
#address-cells = <1>; |
| 122 |
#size-cells = <0>; |
| 123 |
status = "okay"; |
| 124 |
|
| 125 |
port@3 { |
| 126 |
reg = <3>; |
| 127 |
lcdc_output: endpoint { |
| 128 |
remote-endpoint = <&panel_input>; |
| 129 |
}; |
| 130 |
}; |
| 131 |
}; |
| 132 |
|
| 133 |
&rtc { |
| 134 |
status = "okay"; |
| 135 |
clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; |
| 136 |
clock-names = "rtc", "rtc_src"; |
| 137 |
}; |
| 138 |
|
| 139 |
&sdhci_2 { |
| 140 |
bus-width = <4>; |
| 141 |
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; |
| 142 |
pinctrl-names = "default"; |
| 143 |
status = "okay"; |
| 144 |
}; |
| 145 |
|
| 146 |
&serial_0 { |
| 147 |
status = "okay"; |
| 148 |
}; |
| 149 |
|
| 150 |
&serial_1 { |
| 151 |
status = "okay"; |
| 152 |
}; |
| 153 |
|
| 154 |
&serial_2 { |
| 155 |
status = "okay"; |
| 156 |
}; |
| 157 |
|
| 158 |
&serial_3 { |
| 159 |
status = "okay"; |
| 160 |
}; |