| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards |
| 4 |
* device tree source |
| 5 |
*/ |
| 6 |
|
| 7 |
#include <dt-bindings/sound/samsung-i2s.h> |
| 8 |
#include <dt-bindings/input/input.h> |
| 9 |
#include <dt-bindings/clock/maxim,max77686.h> |
| 10 |
#include "exynos4412.dtsi" |
| 11 |
#include "exynos4412-ppmu-common.dtsi" |
| 12 |
#include <dt-bindings/gpio/gpio.h> |
| 13 |
#include "exynos-mfc-reserved-memory.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
aliases { |
| 17 |
mmc0 = &mshc_0; |
| 18 |
mmc2 = &sdhci_2; |
| 19 |
}; |
| 20 |
|
| 21 |
chosen { |
| 22 |
stdout-path = &serial_1; |
| 23 |
}; |
| 24 |
|
| 25 |
firmware@204f000 { |
| 26 |
compatible = "samsung,secure-firmware"; |
| 27 |
reg = <0x0204f000 0x1000>; |
| 28 |
}; |
| 29 |
|
| 30 |
gpio_keys: gpio-keys { |
| 31 |
compatible = "gpio-keys"; |
| 32 |
pinctrl-names = "default"; |
| 33 |
pinctrl-0 = <&gpio_power_key>; |
| 34 |
|
| 35 |
power-key { |
| 36 |
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; |
| 37 |
linux,code = <KEY_POWER>; |
| 38 |
label = "power key"; |
| 39 |
debounce-interval = <10>; |
| 40 |
wakeup-source; |
| 41 |
}; |
| 42 |
}; |
| 43 |
|
| 44 |
sound: sound { |
| 45 |
compatible = "hardkernel,odroid-xu4-audio"; |
| 46 |
|
| 47 |
cpu { |
| 48 |
sound-dai = <&i2s0 0>; |
| 49 |
}; |
| 50 |
|
| 51 |
codec { |
| 52 |
sound-dai = <&hdmi>, <&max98090>; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
emmc_pwrseq: pwrseq { |
| 57 |
pinctrl-0 = <&emmc_rstn>; |
| 58 |
pinctrl-names = "default"; |
| 59 |
compatible = "mmc-pwrseq-emmc"; |
| 60 |
reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>; |
| 61 |
}; |
| 62 |
|
| 63 |
fixed-rate-clocks { |
| 64 |
xxti { |
| 65 |
compatible = "samsung,clock-xxti"; |
| 66 |
clock-frequency = <0>; |
| 67 |
}; |
| 68 |
|
| 69 |
xusbxti { |
| 70 |
compatible = "samsung,clock-xusbxti"; |
| 71 |
clock-frequency = <24000000>; |
| 72 |
}; |
| 73 |
}; |
| 74 |
}; |
| 75 |
|
| 76 |
&bus_dmc { |
| 77 |
devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; |
| 78 |
vdd-supply = <&buck1_reg>; |
| 79 |
status = "okay"; |
| 80 |
}; |
| 81 |
|
| 82 |
&bus_acp { |
| 83 |
devfreq = <&bus_dmc>; |
| 84 |
status = "okay"; |
| 85 |
}; |
| 86 |
|
| 87 |
&bus_c2c { |
| 88 |
devfreq = <&bus_dmc>; |
| 89 |
status = "okay"; |
| 90 |
}; |
| 91 |
|
| 92 |
&bus_leftbus { |
| 93 |
devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; |
| 94 |
vdd-supply = <&buck3_reg>; |
| 95 |
status = "okay"; |
| 96 |
}; |
| 97 |
|
| 98 |
&bus_rightbus { |
| 99 |
devfreq = <&bus_leftbus>; |
| 100 |
status = "okay"; |
| 101 |
}; |
| 102 |
|
| 103 |
&bus_display { |
| 104 |
devfreq = <&bus_leftbus>; |
| 105 |
status = "okay"; |
| 106 |
}; |
| 107 |
|
| 108 |
&bus_fsys { |
| 109 |
devfreq = <&bus_leftbus>; |
| 110 |
status = "okay"; |
| 111 |
}; |
| 112 |
|
| 113 |
&bus_peri { |
| 114 |
devfreq = <&bus_leftbus>; |
| 115 |
status = "okay"; |
| 116 |
}; |
| 117 |
|
| 118 |
&bus_mfc { |
| 119 |
devfreq = <&bus_leftbus>; |
| 120 |
status = "okay"; |
| 121 |
}; |
| 122 |
|
| 123 |
&camera { |
| 124 |
status = "okay"; |
| 125 |
}; |
| 126 |
|
| 127 |
&clock { |
| 128 |
clocks = <&clock CLK_XUSBXTI>; |
| 129 |
assigned-clocks = <&clock CLK_FOUT_EPLL>; |
| 130 |
assigned-clock-rates = <45158401>; |
| 131 |
}; |
| 132 |
|
| 133 |
&clock_audss { |
| 134 |
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, |
| 135 |
<&clock_audss EXYNOS_MOUT_I2S>, |
| 136 |
<&clock_audss EXYNOS_DOUT_SRP>, |
| 137 |
<&clock_audss EXYNOS_DOUT_AUD_BUS>, |
| 138 |
<&clock_audss EXYNOS_DOUT_I2S>; |
| 139 |
|
| 140 |
assigned-clock-parents = <&clock CLK_FOUT_EPLL>, |
| 141 |
<&clock_audss EXYNOS_MOUT_AUDSS>; |
| 142 |
|
| 143 |
assigned-clock-rates = <0>, <0>, |
| 144 |
<196608001>, |
| 145 |
<(196608001 / 2)>, |
| 146 |
<(196608001 / 8)>; |
| 147 |
}; |
| 148 |
|
| 149 |
&cpu0 { |
| 150 |
cpu0-supply = <&buck2_reg>; |
| 151 |
}; |
| 152 |
|
| 153 |
&cpu0_opp_table { |
| 154 |
opp-1000000000 { |
| 155 |
opp-suspend; |
| 156 |
}; |
| 157 |
opp-800000000 { |
| 158 |
/delete-property/opp-suspend; |
| 159 |
}; |
| 160 |
}; |
| 161 |
|
| 162 |
&cpu_thermal { |
| 163 |
cooling-maps { |
| 164 |
cooling_map0: map0 { |
| 165 |
/* Corresponds to 800MHz at freq_table */ |
| 166 |
cooling-device = <&cpu0 7 7>, <&cpu1 7 7>, |
| 167 |
<&cpu2 7 7>, <&cpu3 7 7>; |
| 168 |
}; |
| 169 |
cooling_map1: map1 { |
| 170 |
/* Corresponds to 200MHz at freq_table */ |
| 171 |
cooling-device = <&cpu0 13 13>, <&cpu1 13 13>, |
| 172 |
<&cpu2 13 13>, <&cpu3 13 13>; |
| 173 |
}; |
| 174 |
}; |
| 175 |
}; |
| 176 |
|
| 177 |
&pinctrl_1 { |
| 178 |
gpio_power_key: power-key-pins { |
| 179 |
samsung,pins = "gpx1-3"; |
| 180 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 181 |
}; |
| 182 |
|
| 183 |
max77686_irq: max77686-irq-pins { |
| 184 |
samsung,pins = "gpx3-2"; |
| 185 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 186 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 187 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 188 |
}; |
| 189 |
|
| 190 |
hdmi_hpd: hdmi-hpd-pins { |
| 191 |
samsung,pins = "gpx3-7"; |
| 192 |
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| 193 |
}; |
| 194 |
|
| 195 |
emmc_rstn: emmc-rstn-pins { |
| 196 |
samsung,pins = "gpk1-2"; |
| 197 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 198 |
}; |
| 199 |
}; |
| 200 |
|
| 201 |
&ehci { |
| 202 |
status = "okay"; |
| 203 |
}; |
| 204 |
|
| 205 |
&exynos_usbphy { |
| 206 |
status = "okay"; |
| 207 |
}; |
| 208 |
|
| 209 |
&fimc_0 { |
| 210 |
status = "okay"; |
| 211 |
assigned-clocks = <&clock CLK_MOUT_FIMC0>, |
| 212 |
<&clock CLK_SCLK_FIMC0>; |
| 213 |
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; |
| 214 |
assigned-clock-rates = <0>, <176000000>; |
| 215 |
}; |
| 216 |
|
| 217 |
&fimc_1 { |
| 218 |
status = "okay"; |
| 219 |
assigned-clocks = <&clock CLK_MOUT_FIMC1>, |
| 220 |
<&clock CLK_SCLK_FIMC1>; |
| 221 |
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; |
| 222 |
assigned-clock-rates = <0>, <176000000>; |
| 223 |
}; |
| 224 |
|
| 225 |
&fimc_2 { |
| 226 |
status = "okay"; |
| 227 |
assigned-clocks = <&clock CLK_MOUT_FIMC2>, |
| 228 |
<&clock CLK_SCLK_FIMC2>; |
| 229 |
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; |
| 230 |
assigned-clock-rates = <0>, <176000000>; |
| 231 |
}; |
| 232 |
|
| 233 |
&fimc_3 { |
| 234 |
status = "okay"; |
| 235 |
assigned-clocks = <&clock CLK_MOUT_FIMC3>, |
| 236 |
<&clock CLK_SCLK_FIMC3>; |
| 237 |
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; |
| 238 |
assigned-clock-rates = <0>, <176000000>; |
| 239 |
}; |
| 240 |
|
| 241 |
&gpu { |
| 242 |
mali-supply = <&buck4_reg>; |
| 243 |
status = "okay"; |
| 244 |
}; |
| 245 |
|
| 246 |
&hdmi { |
| 247 |
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
| 248 |
pinctrl-names = "default"; |
| 249 |
pinctrl-0 = <&hdmi_hpd>; |
| 250 |
vdd-supply = <&ldo8_reg>; |
| 251 |
vdd_osc-supply = <&ldo10_reg>; |
| 252 |
vdd_pll-supply = <&ldo8_reg>; |
| 253 |
ddc = <&i2c_2>; |
| 254 |
status = "okay"; |
| 255 |
}; |
| 256 |
|
| 257 |
&hdmicec { |
| 258 |
status = "okay"; |
| 259 |
}; |
| 260 |
|
| 261 |
&hsotg { |
| 262 |
status = "okay"; |
| 263 |
vusb_d-supply = <&ldo15_reg>; |
| 264 |
vusb_a-supply = <&ldo12_reg>; |
| 265 |
}; |
| 266 |
|
| 267 |
&i2c_0 { |
| 268 |
samsung,i2c-sda-delay = <100>; |
| 269 |
samsung,i2c-max-bus-freq = <400000>; |
| 270 |
status = "okay"; |
| 271 |
|
| 272 |
usb3503: usb-hub@8 { |
| 273 |
compatible = "smsc,usb3503"; |
| 274 |
reg = <0x08>; |
| 275 |
|
| 276 |
intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; |
| 277 |
connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; |
| 278 |
reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; |
| 279 |
initial-mode = <1>; |
| 280 |
}; |
| 281 |
|
| 282 |
max77686: pmic@9 { |
| 283 |
compatible = "maxim,max77686"; |
| 284 |
interrupt-parent = <&gpx3>; |
| 285 |
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
| 286 |
pinctrl-names = "default"; |
| 287 |
pinctrl-0 = <&max77686_irq>; |
| 288 |
wakeup-source; |
| 289 |
reg = <0x09>; |
| 290 |
#clock-cells = <1>; |
| 291 |
|
| 292 |
voltage-regulators { |
| 293 |
ldo1_reg: LDO1 { |
| 294 |
regulator-name = "VDD_ALIVE_1.0V"; |
| 295 |
regulator-min-microvolt = <1000000>; |
| 296 |
regulator-max-microvolt = <1000000>; |
| 297 |
regulator-always-on; |
| 298 |
}; |
| 299 |
|
| 300 |
ldo2_reg: LDO2 { |
| 301 |
regulator-name = "VDDQ_M1_2_1.8V"; |
| 302 |
regulator-min-microvolt = <1800000>; |
| 303 |
regulator-max-microvolt = <1800000>; |
| 304 |
regulator-always-on; |
| 305 |
}; |
| 306 |
|
| 307 |
ldo3_reg: LDO3 { |
| 308 |
regulator-name = "VDDQ_EXT_1.8V"; |
| 309 |
regulator-min-microvolt = <1800000>; |
| 310 |
regulator-max-microvolt = <1800000>; |
| 311 |
regulator-always-on; |
| 312 |
}; |
| 313 |
|
| 314 |
ldo4_reg: LDO4 { |
| 315 |
regulator-name = "VDDQ_MMC2_2.8V"; |
| 316 |
regulator-min-microvolt = <2800000>; |
| 317 |
regulator-max-microvolt = <2800000>; |
| 318 |
regulator-boot-on; |
| 319 |
}; |
| 320 |
|
| 321 |
ldo5_reg: LDO5 { |
| 322 |
regulator-name = "VDDQ_MMC1_3_1.8V"; |
| 323 |
regulator-min-microvolt = <1800000>; |
| 324 |
regulator-max-microvolt = <1800000>; |
| 325 |
regulator-always-on; |
| 326 |
regulator-boot-on; |
| 327 |
}; |
| 328 |
|
| 329 |
ldo6_reg: LDO6 { |
| 330 |
regulator-name = "VDD10_MPLL_1.0V"; |
| 331 |
regulator-min-microvolt = <1000000>; |
| 332 |
regulator-max-microvolt = <1000000>; |
| 333 |
regulator-always-on; |
| 334 |
}; |
| 335 |
|
| 336 |
ldo7_reg: LDO7 { |
| 337 |
regulator-name = "VDD10_XPLL_1.0V"; |
| 338 |
regulator-min-microvolt = <1000000>; |
| 339 |
regulator-max-microvolt = <1000000>; |
| 340 |
regulator-always-on; |
| 341 |
}; |
| 342 |
|
| 343 |
ldo8_reg: LDO8 { |
| 344 |
regulator-name = "VDD10_HDMI_1.0V"; |
| 345 |
regulator-min-microvolt = <1000000>; |
| 346 |
regulator-max-microvolt = <1000000>; |
| 347 |
}; |
| 348 |
|
| 349 |
ldo10_reg: LDO10 { |
| 350 |
regulator-name = "VDDQ_MIPIHSI_1.8V"; |
| 351 |
regulator-min-microvolt = <1800000>; |
| 352 |
regulator-max-microvolt = <1800000>; |
| 353 |
}; |
| 354 |
|
| 355 |
ldo11_reg: LDO11 { |
| 356 |
regulator-name = "VDD18_ABB1_1.8V"; |
| 357 |
regulator-min-microvolt = <1800000>; |
| 358 |
regulator-max-microvolt = <1800000>; |
| 359 |
regulator-always-on; |
| 360 |
}; |
| 361 |
|
| 362 |
ldo12_reg: LDO12 { |
| 363 |
regulator-name = "VDD33_USB_3.3V"; |
| 364 |
regulator-min-microvolt = <3300000>; |
| 365 |
regulator-max-microvolt = <3300000>; |
| 366 |
regulator-always-on; |
| 367 |
regulator-boot-on; |
| 368 |
}; |
| 369 |
|
| 370 |
ldo13_reg: LDO13 { |
| 371 |
regulator-name = "VDDQ_C2C_W_1.8V"; |
| 372 |
regulator-min-microvolt = <1800000>; |
| 373 |
regulator-max-microvolt = <1800000>; |
| 374 |
regulator-always-on; |
| 375 |
regulator-boot-on; |
| 376 |
}; |
| 377 |
|
| 378 |
ldo14_reg: LDO14 { |
| 379 |
regulator-name = "VDD18_ABB0_2_1.8V"; |
| 380 |
regulator-min-microvolt = <1800000>; |
| 381 |
regulator-max-microvolt = <1800000>; |
| 382 |
regulator-always-on; |
| 383 |
regulator-boot-on; |
| 384 |
}; |
| 385 |
|
| 386 |
ldo15_reg: LDO15 { |
| 387 |
regulator-name = "VDD10_HSIC_1.0V"; |
| 388 |
regulator-min-microvolt = <1000000>; |
| 389 |
regulator-max-microvolt = <1000000>; |
| 390 |
regulator-always-on; |
| 391 |
regulator-boot-on; |
| 392 |
}; |
| 393 |
|
| 394 |
ldo16_reg: LDO16 { |
| 395 |
regulator-name = "VDD18_HSIC_1.8V"; |
| 396 |
regulator-min-microvolt = <1800000>; |
| 397 |
regulator-max-microvolt = <1800000>; |
| 398 |
regulator-always-on; |
| 399 |
regulator-boot-on; |
| 400 |
}; |
| 401 |
|
| 402 |
ldo20_reg: LDO20 { |
| 403 |
regulator-name = "LDO20_1.8V"; |
| 404 |
regulator-min-microvolt = <1800000>; |
| 405 |
regulator-max-microvolt = <1800000>; |
| 406 |
}; |
| 407 |
|
| 408 |
ldo21_reg: LDO21 { |
| 409 |
regulator-name = "TFLASH_2.8V"; |
| 410 |
regulator-min-microvolt = <2800000>; |
| 411 |
regulator-max-microvolt = <2800000>; |
| 412 |
regulator-boot-on; |
| 413 |
}; |
| 414 |
|
| 415 |
ldo22_reg: LDO22 { |
| 416 |
/* |
| 417 |
* Only U3 uses it, so let it define the |
| 418 |
* constraints |
| 419 |
*/ |
| 420 |
regulator-name = "LDO22"; |
| 421 |
regulator-boot-on; |
| 422 |
}; |
| 423 |
|
| 424 |
ldo25_reg: LDO25 { |
| 425 |
regulator-name = "VDDQ_LCD_1.8V"; |
| 426 |
regulator-min-microvolt = <1800000>; |
| 427 |
regulator-max-microvolt = <1800000>; |
| 428 |
regulator-always-on; |
| 429 |
regulator-boot-on; |
| 430 |
}; |
| 431 |
|
| 432 |
buck1_reg: BUCK1 { |
| 433 |
regulator-name = "VDD_MIF"; |
| 434 |
regulator-min-microvolt = <900000>; |
| 435 |
regulator-max-microvolt = <1100000>; |
| 436 |
regulator-always-on; |
| 437 |
regulator-boot-on; |
| 438 |
}; |
| 439 |
|
| 440 |
buck2_reg: BUCK2 { |
| 441 |
regulator-name = "VDD_ARM"; |
| 442 |
regulator-min-microvolt = <900000>; |
| 443 |
regulator-max-microvolt = <1350000>; |
| 444 |
regulator-always-on; |
| 445 |
regulator-boot-on; |
| 446 |
}; |
| 447 |
|
| 448 |
buck3_reg: BUCK3 { |
| 449 |
regulator-name = "VDD_INT"; |
| 450 |
regulator-min-microvolt = <900000>; |
| 451 |
regulator-max-microvolt = <1050000>; |
| 452 |
regulator-always-on; |
| 453 |
regulator-boot-on; |
| 454 |
}; |
| 455 |
|
| 456 |
buck4_reg: BUCK4 { |
| 457 |
regulator-name = "VDD_G3D"; |
| 458 |
regulator-min-microvolt = <900000>; |
| 459 |
regulator-max-microvolt = <1100000>; |
| 460 |
regulator-microvolt-offset = <50000>; |
| 461 |
}; |
| 462 |
|
| 463 |
buck5_reg: BUCK5 { |
| 464 |
regulator-name = "VDDQ_CKEM1_2_1.2V"; |
| 465 |
regulator-min-microvolt = <1200000>; |
| 466 |
regulator-max-microvolt = <1200000>; |
| 467 |
regulator-always-on; |
| 468 |
regulator-boot-on; |
| 469 |
}; |
| 470 |
|
| 471 |
buck6_reg: BUCK6 { |
| 472 |
regulator-name = "BUCK6_1.35V"; |
| 473 |
regulator-min-microvolt = <1350000>; |
| 474 |
regulator-max-microvolt = <1350000>; |
| 475 |
regulator-always-on; |
| 476 |
regulator-boot-on; |
| 477 |
}; |
| 478 |
|
| 479 |
buck7_reg: BUCK7 { |
| 480 |
regulator-name = "BUCK7_2.0V"; |
| 481 |
regulator-min-microvolt = <2000000>; |
| 482 |
regulator-max-microvolt = <2000000>; |
| 483 |
regulator-always-on; |
| 484 |
}; |
| 485 |
|
| 486 |
buck8_reg: BUCK8 { |
| 487 |
/* |
| 488 |
* Constraints set by specific board: X, |
| 489 |
* X2 and U3. |
| 490 |
*/ |
| 491 |
regulator-name = "BUCK8_2.8V"; |
| 492 |
}; |
| 493 |
}; |
| 494 |
}; |
| 495 |
}; |
| 496 |
|
| 497 |
&i2c_1 { |
| 498 |
status = "okay"; |
| 499 |
max98090: audio-codec@10 { |
| 500 |
compatible = "maxim,max98090"; |
| 501 |
reg = <0x10>; |
| 502 |
interrupt-parent = <&gpx0>; |
| 503 |
interrupts = <0 IRQ_TYPE_NONE>; |
| 504 |
clocks = <&i2s0 CLK_I2S_CDCLK>; |
| 505 |
clock-names = "mclk"; |
| 506 |
#sound-dai-cells = <0>; |
| 507 |
}; |
| 508 |
}; |
| 509 |
|
| 510 |
&i2c_2 { |
| 511 |
status = "okay"; |
| 512 |
}; |
| 513 |
|
| 514 |
&i2c_8 { |
| 515 |
status = "okay"; |
| 516 |
}; |
| 517 |
|
| 518 |
&i2s0 { |
| 519 |
pinctrl-0 = <&i2s0_bus>; |
| 520 |
pinctrl-names = "default"; |
| 521 |
status = "okay"; |
| 522 |
assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; |
| 523 |
assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>; |
| 524 |
}; |
| 525 |
|
| 526 |
&mixer { |
| 527 |
status = "okay"; |
| 528 |
}; |
| 529 |
|
| 530 |
&mshc_0 { |
| 531 |
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; |
| 532 |
pinctrl-names = "default"; |
| 533 |
vmmc-supply = <&ldo20_reg>; |
| 534 |
mmc-pwrseq = <&emmc_pwrseq>; |
| 535 |
status = "okay"; |
| 536 |
|
| 537 |
broken-cd; |
| 538 |
card-detect-delay = <200>; |
| 539 |
mmc-ddr-1_8v; |
| 540 |
samsung,dw-mshc-ciu-div = <3>; |
| 541 |
samsung,dw-mshc-sdr-timing = <2 3>; |
| 542 |
samsung,dw-mshc-ddr-timing = <1 2>; |
| 543 |
bus-width = <8>; |
| 544 |
cap-mmc-highspeed; |
| 545 |
}; |
| 546 |
|
| 547 |
&rtc { |
| 548 |
status = "okay"; |
| 549 |
clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; |
| 550 |
clock-names = "rtc", "rtc_src"; |
| 551 |
}; |
| 552 |
|
| 553 |
&sdhci_2 { |
| 554 |
bus-width = <4>; |
| 555 |
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; |
| 556 |
pinctrl-names = "default"; |
| 557 |
vmmc-supply = <&ldo21_reg>; |
| 558 |
vqmmc-supply = <&ldo4_reg>; |
| 559 |
cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>; |
| 560 |
status = "okay"; |
| 561 |
}; |
| 562 |
|
| 563 |
&serial_0 { |
| 564 |
status = "okay"; |
| 565 |
}; |
| 566 |
|
| 567 |
&serial_1 { |
| 568 |
status = "okay"; |
| 569 |
}; |
| 570 |
|
| 571 |
&tmu { |
| 572 |
vtmu-supply = <&ldo10_reg>; |
| 573 |
status = "okay"; |
| 574 |
}; |