| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree |
| 4 |
* |
| 5 |
* Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
* Copyright (c) 2020 Stenkin Evgeniy <[email protected]> |
| 8 |
* Copyright (c) 2020 Paul Cercueil <[email protected]> |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
#include "exynos4210.dtsi" |
| 13 |
#include "exynos4412-ppmu-common.dtsi" |
| 14 |
|
| 15 |
#include <dt-bindings/gpio/gpio.h> |
| 16 |
#include <dt-bindings/input/linux-event-codes.h> |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "Samsung Galaxy S2 (GT-I9100)"; |
| 20 |
compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4"; |
| 21 |
chassis-type = "handset"; |
| 22 |
|
| 23 |
memory@40000000 { |
| 24 |
device_type = "memory"; |
| 25 |
reg = <0x40000000 0x40000000>; |
| 26 |
}; |
| 27 |
|
| 28 |
aliases { |
| 29 |
mmc0 = &sdhci_0; |
| 30 |
mmc1 = &sdhci_2; |
| 31 |
mmc2 = &sdhci_3; |
| 32 |
}; |
| 33 |
|
| 34 |
chosen { |
| 35 |
stdout-path = "serial2:115200n8"; |
| 36 |
}; |
| 37 |
|
| 38 |
vemmc_reg: regulator-0 { |
| 39 |
compatible = "regulator-fixed"; |
| 40 |
regulator-name = "VMEM_VDD_2.8V"; |
| 41 |
regulator-min-microvolt = <2800000>; |
| 42 |
regulator-max-microvolt = <2800000>; |
| 43 |
gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
| 44 |
enable-active-high; |
| 45 |
}; |
| 46 |
|
| 47 |
tsp_reg: regulator-1 { |
| 48 |
compatible = "regulator-fixed"; |
| 49 |
regulator-name = "TSP_FIXED_VOLTAGES"; |
| 50 |
regulator-min-microvolt = <3300000>; |
| 51 |
regulator-max-microvolt = <3300000>; |
| 52 |
gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; |
| 53 |
startup-delay-us = <70000>; |
| 54 |
enable-active-high; |
| 55 |
regulator-boot-on; |
| 56 |
regulator-always-on; |
| 57 |
}; |
| 58 |
|
| 59 |
cam_af_28v_reg: regulator-2 { |
| 60 |
compatible = "regulator-fixed"; |
| 61 |
regulator-name = "8M_AF_2.8V_EN"; |
| 62 |
regulator-min-microvolt = <2800000>; |
| 63 |
regulator-max-microvolt = <2800000>; |
| 64 |
gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; |
| 65 |
enable-active-high; |
| 66 |
}; |
| 67 |
|
| 68 |
cam_io_en_reg: regulator-3 { |
| 69 |
compatible = "regulator-fixed"; |
| 70 |
regulator-name = "CAM_IO_EN"; |
| 71 |
regulator-min-microvolt = <2800000>; |
| 72 |
regulator-max-microvolt = <2800000>; |
| 73 |
gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; |
| 74 |
enable-active-high; |
| 75 |
}; |
| 76 |
|
| 77 |
cam_io_12v_reg: regulator-4 { |
| 78 |
compatible = "regulator-fixed"; |
| 79 |
regulator-name = "8M_1.2V_EN"; |
| 80 |
regulator-min-microvolt = <1200000>; |
| 81 |
regulator-max-microvolt = <1200000>; |
| 82 |
gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; |
| 83 |
enable-active-high; |
| 84 |
}; |
| 85 |
|
| 86 |
vt_core_15v_reg: regulator-5 { |
| 87 |
compatible = "regulator-fixed"; |
| 88 |
regulator-name = "VT_CORE_1.5V"; |
| 89 |
regulator-min-microvolt = <1500000>; |
| 90 |
regulator-max-microvolt = <1500000>; |
| 91 |
gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; |
| 92 |
enable-active-high; |
| 93 |
}; |
| 94 |
|
| 95 |
gpio-keys { |
| 96 |
compatible = "gpio-keys"; |
| 97 |
|
| 98 |
key-vol-down { |
| 99 |
gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; |
| 100 |
linux,code = <KEY_VOLUMEDOWN>; |
| 101 |
label = "volume down"; |
| 102 |
debounce-interval = <10>; |
| 103 |
}; |
| 104 |
|
| 105 |
key-vol-up { |
| 106 |
gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; |
| 107 |
linux,code = <KEY_VOLUMEUP>; |
| 108 |
label = "volume up"; |
| 109 |
debounce-interval = <10>; |
| 110 |
}; |
| 111 |
|
| 112 |
key-power { |
| 113 |
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
| 114 |
linux,code = <KEY_POWER>; |
| 115 |
label = "power"; |
| 116 |
debounce-interval = <10>; |
| 117 |
wakeup-source; |
| 118 |
}; |
| 119 |
|
| 120 |
key-ok { |
| 121 |
gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; |
| 122 |
linux,code = <KEY_OK>; |
| 123 |
label = "ok"; |
| 124 |
debounce-interval = <10>; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
wlan_pwrseq: sdhci3-pwrseq { |
| 129 |
compatible = "mmc-pwrseq-simple"; |
| 130 |
reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; |
| 131 |
}; |
| 132 |
|
| 133 |
i2c_max17042_fuel: i2c-9 { |
| 134 |
compatible = "i2c-gpio"; |
| 135 |
#address-cells = <1>; |
| 136 |
#size-cells = <0>; |
| 137 |
|
| 138 |
sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 139 |
scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 140 |
i2c-gpio,delay-us = <5>; |
| 141 |
|
| 142 |
battery@36 { |
| 143 |
compatible = "maxim,max17042"; |
| 144 |
|
| 145 |
interrupt-parent = <&gpx2>; |
| 146 |
interrupts = <3 IRQ_TYPE_LEVEL_LOW>; |
| 147 |
|
| 148 |
pinctrl-0 = <&max17042_fuel_irq>; |
| 149 |
pinctrl-names = "default"; |
| 150 |
|
| 151 |
reg = <0x36>; |
| 152 |
maxim,over-heat-temp = <700>; |
| 153 |
maxim,over-volt = <4500>; |
| 154 |
}; |
| 155 |
}; |
| 156 |
|
| 157 |
i2c_s5k5baf: i2c-10 { |
| 158 |
compatible = "i2c-gpio"; |
| 159 |
#address-cells = <1>; |
| 160 |
#size-cells = <0>; |
| 161 |
|
| 162 |
sda-gpios = <&gpc1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 163 |
scl-gpios = <&gpc1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 164 |
i2c-gpio,delay-us = <2>; |
| 165 |
|
| 166 |
image-sensor@2d { |
| 167 |
compatible = "samsung,s5k5baf"; |
| 168 |
reg = <0x2d>; |
| 169 |
vdda-supply = <&cam_io_en_reg>; |
| 170 |
vddreg-supply = <&vt_core_15v_reg>; |
| 171 |
vddio-supply = <&vtcam_reg>; |
| 172 |
clocks = <&camera 0>; |
| 173 |
clock-names = "mclk"; |
| 174 |
stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>; |
| 175 |
rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>; |
| 176 |
clock-frequency = <24000000>; |
| 177 |
|
| 178 |
port { |
| 179 |
s5k5bafx_ep: endpoint { |
| 180 |
remote-endpoint = <&csis1_ep>; |
| 181 |
data-lanes = <1>; |
| 182 |
}; |
| 183 |
}; |
| 184 |
}; |
| 185 |
}; |
| 186 |
|
| 187 |
i2c-11 { |
| 188 |
compatible = "i2c-gpio"; |
| 189 |
#address-cells = <1>; |
| 190 |
#size-cells = <0>; |
| 191 |
|
| 192 |
sda-gpios = <&gpk1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 193 |
scl-gpios = <&gpk1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 194 |
i2c-gpio,delay-us = <2>; |
| 195 |
|
| 196 |
touchscreen@20 { |
| 197 |
compatible = "cypress,aries-touchkey"; |
| 198 |
reg = <0x20>; |
| 199 |
|
| 200 |
interrupt-parent = <&gpl0>; |
| 201 |
interrupts = <5 IRQ_TYPE_EDGE_FALLING>; |
| 202 |
|
| 203 |
vdd-supply = <&vtouchled_reg>; |
| 204 |
vcc-supply = <&vtouch_reg>; |
| 205 |
linux,keycodes = <KEY_MENU>, <KEY_BACK>; |
| 206 |
}; |
| 207 |
}; |
| 208 |
|
| 209 |
spi-3 { |
| 210 |
compatible = "spi-gpio"; |
| 211 |
#address-cells = <1>; |
| 212 |
#size-cells = <0>; |
| 213 |
|
| 214 |
num-chipselects = <1>; |
| 215 |
cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>; |
| 216 |
sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>; |
| 217 |
mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>; |
| 218 |
|
| 219 |
lcd@0 { |
| 220 |
compatible = "samsung,ld9040"; |
| 221 |
reg = <0>; |
| 222 |
|
| 223 |
spi-max-frequency = <1200000>; |
| 224 |
|
| 225 |
vdd3-supply = <&vmipi_reg>; |
| 226 |
vci-supply = <&vcclcd_reg>; |
| 227 |
|
| 228 |
reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; |
| 229 |
power-on-delay = <10>; |
| 230 |
reset-delay = <10>; |
| 231 |
|
| 232 |
panel-width-mm = <56>; |
| 233 |
panel-height-mm = <93>; |
| 234 |
|
| 235 |
display-timings { |
| 236 |
timing { |
| 237 |
clock-frequency = <23492370>; |
| 238 |
hactive = <480>; |
| 239 |
vactive = <800>; |
| 240 |
hback-porch = <16>; |
| 241 |
hfront-porch = <16>; |
| 242 |
vback-porch = <2>; |
| 243 |
vfront-porch = <28>; |
| 244 |
hsync-len = <2>; |
| 245 |
vsync-len = <1>; |
| 246 |
hsync-active = <0>; |
| 247 |
vsync-active = <0>; |
| 248 |
de-active = <0>; |
| 249 |
pixelclk-active = <0>; |
| 250 |
}; |
| 251 |
}; |
| 252 |
|
| 253 |
port { |
| 254 |
lcd_ep: endpoint { |
| 255 |
remote-endpoint = <&fimd_dpi_ep>; |
| 256 |
}; |
| 257 |
}; |
| 258 |
}; |
| 259 |
}; |
| 260 |
|
| 261 |
fixed-rate-clocks { |
| 262 |
xxti { |
| 263 |
compatible = "samsung,clock-xxti"; |
| 264 |
clock-frequency = <0>; |
| 265 |
}; |
| 266 |
|
| 267 |
xusbxti { |
| 268 |
compatible = "samsung,clock-xusbxti"; |
| 269 |
clock-frequency = <24000000>; |
| 270 |
}; |
| 271 |
|
| 272 |
pmic_ap_clk: pmic-ap-clk { |
| 273 |
/* Workaround for missing clock on max8997 PMIC */ |
| 274 |
compatible = "fixed-clock"; |
| 275 |
#clock-cells = <0>; |
| 276 |
clock-frequency = <32768>; |
| 277 |
}; |
| 278 |
}; |
| 279 |
}; |
| 280 |
|
| 281 |
&camera { |
| 282 |
pinctrl-0 = <&cam_port_a_clk_active>; |
| 283 |
pinctrl-names = "default"; |
| 284 |
status = "okay"; |
| 285 |
assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>; |
| 286 |
assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>; |
| 287 |
}; |
| 288 |
|
| 289 |
&csis_1 { |
| 290 |
status = "okay"; |
| 291 |
vddcore-supply = <&vusb_reg>; |
| 292 |
vddio-supply = <&vmipi_reg>; |
| 293 |
clock-frequency = <160000000>; |
| 294 |
#address-cells = <1>; |
| 295 |
#size-cells = <0>; |
| 296 |
|
| 297 |
port@4 { |
| 298 |
reg = <4>; |
| 299 |
csis1_ep: endpoint { |
| 300 |
remote-endpoint = <&s5k5bafx_ep>; |
| 301 |
data-lanes = <1>; |
| 302 |
samsung,csis-hs-settle = <6>; |
| 303 |
}; |
| 304 |
}; |
| 305 |
}; |
| 306 |
|
| 307 |
&cpu0 { |
| 308 |
cpu0-supply = <&varm_breg>; |
| 309 |
}; |
| 310 |
|
| 311 |
&cpu_thermal { |
| 312 |
cooling-maps { |
| 313 |
map0 { |
| 314 |
/* Corresponds to 800MHz */ |
| 315 |
cooling-device = <&cpu0 2 2>; |
| 316 |
}; |
| 317 |
map1 { |
| 318 |
/* Corresponds to 200MHz */ |
| 319 |
cooling-device = <&cpu0 4 4>; |
| 320 |
}; |
| 321 |
}; |
| 322 |
}; |
| 323 |
|
| 324 |
&ehci { |
| 325 |
status = "okay"; |
| 326 |
|
| 327 |
phys = <&exynos_usbphy 1>; |
| 328 |
phy-names = "host"; |
| 329 |
}; |
| 330 |
|
| 331 |
&exynos_usbphy { |
| 332 |
status = "okay"; |
| 333 |
|
| 334 |
vbus-supply = <&safe1_sreg>; |
| 335 |
}; |
| 336 |
|
| 337 |
&fimc_0 { |
| 338 |
status = "okay"; |
| 339 |
|
| 340 |
assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>; |
| 341 |
assigned-clock-parents = <&clock CLK_SCLK_MPLL>; |
| 342 |
assigned-clock-rates = <0>, <160000000>; |
| 343 |
}; |
| 344 |
|
| 345 |
&fimc_1 { |
| 346 |
/* Back camera not implemented */ |
| 347 |
status = "disabled"; |
| 348 |
|
| 349 |
assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>; |
| 350 |
assigned-clock-parents = <&clock CLK_SCLK_MPLL>; |
| 351 |
assigned-clock-rates = <0>, <160000000>; |
| 352 |
}; |
| 353 |
|
| 354 |
&fimc_2 { |
| 355 |
status = "okay"; |
| 356 |
|
| 357 |
assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>; |
| 358 |
assigned-clock-parents = <&clock CLK_SCLK_MPLL>; |
| 359 |
assigned-clock-rates = <0>, <160000000>; |
| 360 |
}; |
| 361 |
|
| 362 |
&fimc_3 { |
| 363 |
/* Back camera not implemented */ |
| 364 |
status = "disabled"; |
| 365 |
|
| 366 |
assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>; |
| 367 |
assigned-clock-parents = <&clock CLK_SCLK_MPLL>; |
| 368 |
assigned-clock-rates = <0>, <160000000>; |
| 369 |
}; |
| 370 |
|
| 371 |
&fimd { |
| 372 |
status = "okay"; |
| 373 |
#address-cells = <1>; |
| 374 |
#size-cells = <0>; |
| 375 |
|
| 376 |
samsung,invert-vden; |
| 377 |
samsung,invert-vclk; |
| 378 |
|
| 379 |
pinctrl-0 = <&lcd_clk>, <&lcd_data24>; |
| 380 |
pinctrl-names = "default"; |
| 381 |
|
| 382 |
port@3 { |
| 383 |
reg = <3>; |
| 384 |
|
| 385 |
fimd_dpi_ep: endpoint { |
| 386 |
remote-endpoint = <&lcd_ep>; |
| 387 |
}; |
| 388 |
}; |
| 389 |
}; |
| 390 |
|
| 391 |
&gpu { |
| 392 |
status = "okay"; |
| 393 |
|
| 394 |
mali-supply = <&vg3d_breg>; |
| 395 |
}; |
| 396 |
|
| 397 |
&hsotg { |
| 398 |
status = "okay"; |
| 399 |
|
| 400 |
dr_mode = "otg"; |
| 401 |
vusb_d-supply = <&vusb_reg>; |
| 402 |
vusb_a-supply = <&vusbdac_reg>; |
| 403 |
}; |
| 404 |
|
| 405 |
&i2c_1 { |
| 406 |
status = "okay"; |
| 407 |
|
| 408 |
samsung,i2c-sda-delay = <100>; |
| 409 |
samsung,i2c-slave-addr = <0x10>; |
| 410 |
samsung,i2c-max-bus-freq = <100000>; |
| 411 |
|
| 412 |
lis3dh: accelerometer@19 { |
| 413 |
compatible = "st,lis3dh-accel"; |
| 414 |
reg = <0x19>; |
| 415 |
|
| 416 |
mount-matrix = "0", "-1", "0", |
| 417 |
"1", "0", "0", |
| 418 |
"0", "0", "1"; |
| 419 |
}; |
| 420 |
}; |
| 421 |
|
| 422 |
&i2c_3 { |
| 423 |
status = "okay"; |
| 424 |
|
| 425 |
samsung,i2c-sda-delay = <100>; |
| 426 |
samsung,i2c-slave-addr = <0x10>; |
| 427 |
samsung,i2c-max-bus-freq = <100000>; |
| 428 |
|
| 429 |
pinctrl-0 = <&i2c3_bus>; |
| 430 |
pinctrl-names = "default"; |
| 431 |
|
| 432 |
touchscreen@4a { |
| 433 |
compatible = "atmel,maxtouch"; |
| 434 |
reg = <0x4a>; |
| 435 |
|
| 436 |
interrupt-parent = <&gpx0>; |
| 437 |
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; |
| 438 |
}; |
| 439 |
}; |
| 440 |
|
| 441 |
&i2c_5 { |
| 442 |
status = "okay"; |
| 443 |
|
| 444 |
samsung,i2c-sda-delay = <100>; |
| 445 |
samsung,i2c-slave-addr = <0x10>; |
| 446 |
samsung,i2c-max-bus-freq = <100000>; |
| 447 |
|
| 448 |
pinctrl-0 = <&i2c5_bus>; |
| 449 |
pinctrl-names = "default"; |
| 450 |
|
| 451 |
pmic@66 { |
| 452 |
compatible = "maxim,max8997-pmic"; |
| 453 |
reg = <0x66>; |
| 454 |
|
| 455 |
interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>, |
| 456 |
<&gpx2 3 IRQ_TYPE_EDGE_FALLING>; |
| 457 |
|
| 458 |
max8997,pmic-buck1-uses-gpio-dvs; |
| 459 |
max8997,pmic-buck2-uses-gpio-dvs; |
| 460 |
max8997,pmic-buck5-uses-gpio-dvs; |
| 461 |
|
| 462 |
max8997,pmic-ignore-gpiodvs-side-effect; |
| 463 |
max8997,pmic-buck125-default-dvs-idx = <0>; |
| 464 |
|
| 465 |
max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, |
| 466 |
<&gpx0 6 GPIO_ACTIVE_HIGH>, |
| 467 |
<&gpl0 0 GPIO_ACTIVE_HIGH>; |
| 468 |
|
| 469 |
max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, |
| 470 |
<1250000>, <1200000>, |
| 471 |
<1150000>, <1100000>, |
| 472 |
<1000000>, <950000>; |
| 473 |
|
| 474 |
max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, |
| 475 |
<950000>, <900000>, |
| 476 |
<1100000>, <1000000>, |
| 477 |
<950000>, <900000>; |
| 478 |
|
| 479 |
max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, |
| 480 |
<1200000>, <1200000>, |
| 481 |
<1200000>, <1200000>, |
| 482 |
<1200000>, <1200000>; |
| 483 |
|
| 484 |
pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>; |
| 485 |
pinctrl-names = "default"; |
| 486 |
|
| 487 |
charger-supply = <&charger_reg>; |
| 488 |
|
| 489 |
regulators { |
| 490 |
vadc_reg: LDO1 { |
| 491 |
regulator-name = "VADC_3.3V_C210"; |
| 492 |
regulator-min-microvolt = <3300000>; |
| 493 |
regulator-max-microvolt = <3300000>; |
| 494 |
regulator-always-on; |
| 495 |
|
| 496 |
}; |
| 497 |
valive_reg: LDO2 { |
| 498 |
regulator-name = "VALIVE_1.1V_C210"; |
| 499 |
regulator-min-microvolt = <1100000>; |
| 500 |
regulator-max-microvolt = <1100000>; |
| 501 |
regulator-always-on; |
| 502 |
|
| 503 |
}; |
| 504 |
|
| 505 |
vusb_reg: LDO3 { |
| 506 |
regulator-name = "VUSB_1.1V_C210"; |
| 507 |
regulator-min-microvolt = <1100000>; |
| 508 |
regulator-max-microvolt = <1100000>; |
| 509 |
}; |
| 510 |
|
| 511 |
vmipi_reg: LDO4 { |
| 512 |
regulator-name = "VMIPI_1.8V"; |
| 513 |
regulator-min-microvolt = <1800000>; |
| 514 |
regulator-max-microvolt = <1800000>; |
| 515 |
regulator-always-on; |
| 516 |
}; |
| 517 |
|
| 518 |
vhsic_reg: LDO5 { |
| 519 |
regulator-name = "VHSIC_1.2V"; |
| 520 |
regulator-min-microvolt = <1200000>; |
| 521 |
regulator-max-microvolt = <1200000>; |
| 522 |
regulator-always-on; |
| 523 |
}; |
| 524 |
|
| 525 |
vpda_reg: LDO6 { |
| 526 |
regulator-name = "VCC_1.8V_PDA"; |
| 527 |
regulator-min-microvolt = <1800000>; |
| 528 |
regulator-max-microvolt = <1800000>; |
| 529 |
regulator-always-on; |
| 530 |
}; |
| 531 |
|
| 532 |
vcam_reg: LDO7 { |
| 533 |
regulator-name = "CAM_ISP_1.8V"; |
| 534 |
regulator-min-microvolt = <1800000>; |
| 535 |
regulator-max-microvolt = <1800000>; |
| 536 |
}; |
| 537 |
|
| 538 |
vusbdac_reg: LDO8 { |
| 539 |
regulator-name = "VUSB+VDAC_3.3V_C210"; |
| 540 |
regulator-min-microvolt = <3300000>; |
| 541 |
regulator-max-microvolt = <3300000>; |
| 542 |
}; |
| 543 |
|
| 544 |
vccpda_reg: LDO9 { |
| 545 |
regulator-name = "VCC_2.8V_PDA"; |
| 546 |
regulator-min-microvolt = <2800000>; |
| 547 |
regulator-max-microvolt = <2800000>; |
| 548 |
regulator-always-on; |
| 549 |
}; |
| 550 |
|
| 551 |
vtouch_reg: LDO11 { |
| 552 |
regulator-name = "TOUCH_2.8V"; |
| 553 |
regulator-min-microvolt = <2800000>; |
| 554 |
regulator-max-microvolt = <2800000>; |
| 555 |
}; |
| 556 |
|
| 557 |
vpll_reg: LDO10 { |
| 558 |
regulator-name = "VPLL_1.1V"; |
| 559 |
regulator-min-microvolt = <1100000>; |
| 560 |
regulator-max-microvolt = <1100000>; |
| 561 |
regulator-always-on; |
| 562 |
}; |
| 563 |
|
| 564 |
vtcam_reg: LDO12 { |
| 565 |
regulator-name = "VT_CAM_1.8V"; |
| 566 |
regulator-min-microvolt = <1800000>; |
| 567 |
regulator-max-microvolt = <1800000>; |
| 568 |
|
| 569 |
/* |
| 570 |
* Force-enable this regulator; otherwise the |
| 571 |
* kernel hangs very early in the boot process |
| 572 |
* for about 12 seconds, without apparent |
| 573 |
* reason. |
| 574 |
*/ |
| 575 |
regulator-always-on; |
| 576 |
}; |
| 577 |
|
| 578 |
vcclcd_reg: LDO13 { |
| 579 |
regulator-name = "VCC_3.0V_LCD"; |
| 580 |
regulator-min-microvolt = <3000000>; |
| 581 |
regulator-max-microvolt = <3000000>; |
| 582 |
}; |
| 583 |
|
| 584 |
vmotor_reg: LDO14 { |
| 585 |
regulator-name = "VCC_2.8V_MOTOR"; |
| 586 |
regulator-min-microvolt = <2800000>; |
| 587 |
regulator-max-microvolt = <2800000>; |
| 588 |
}; |
| 589 |
|
| 590 |
vled_reg: LDO15 { |
| 591 |
regulator-name = "LED_A_2.8V"; |
| 592 |
regulator-min-microvolt = <2800000>; |
| 593 |
regulator-max-microvolt = <2800000>; |
| 594 |
}; |
| 595 |
|
| 596 |
camsensor_reg: LDO16 { |
| 597 |
regulator-name = "CAM_SENSOR_IO_1.8V"; |
| 598 |
regulator-min-microvolt = <1800000>; |
| 599 |
regulator-max-microvolt = <1800000>; |
| 600 |
}; |
| 601 |
|
| 602 |
vtf_reg: LDO17 { |
| 603 |
regulator-name = "VTF_2.8V"; |
| 604 |
regulator-min-microvolt = <2800000>; |
| 605 |
regulator-max-microvolt = <2800000>; |
| 606 |
}; |
| 607 |
|
| 608 |
vtouchled_reg: LDO18 { |
| 609 |
regulator-name = "TOUCH_LED_3.3V"; |
| 610 |
regulator-min-microvolt = <2500000>; |
| 611 |
regulator-max-microvolt = <3300000>; |
| 612 |
}; |
| 613 |
|
| 614 |
vddq_reg: LDO21 { |
| 615 |
regulator-name = "VDDQ_M1M2_1.2V"; |
| 616 |
regulator-min-microvolt = <1200000>; |
| 617 |
regulator-max-microvolt = <1200000>; |
| 618 |
regulator-always-on; |
| 619 |
}; |
| 620 |
|
| 621 |
varm_breg: BUCK1 { |
| 622 |
regulator-name = "VARM_1.2V_C210"; |
| 623 |
regulator-min-microvolt = <65000>; |
| 624 |
regulator-max-microvolt = <2225000>; |
| 625 |
regulator-always-on; |
| 626 |
}; |
| 627 |
|
| 628 |
vint_breg: BUCK2 { |
| 629 |
regulator-name = "VINT_1.1V_C210"; |
| 630 |
regulator-min-microvolt = <65000>; |
| 631 |
regulator-max-microvolt = <2225000>; |
| 632 |
regulator-always-on; |
| 633 |
}; |
| 634 |
|
| 635 |
vg3d_breg: BUCK3 { |
| 636 |
regulator-name = "G3D_1.1V"; |
| 637 |
regulator-min-microvolt = <900000>; |
| 638 |
regulator-max-microvolt = <1200000>; |
| 639 |
regulator-microvolt-offset = <50000>; |
| 640 |
regulator-always-on; |
| 641 |
}; |
| 642 |
|
| 643 |
camisp_breg: BUCK4 { |
| 644 |
regulator-name = "CAM_ISP_CORE_1.2V"; |
| 645 |
regulator-min-microvolt = <1200000>; |
| 646 |
regulator-max-microvolt = <1200000>; |
| 647 |
}; |
| 648 |
|
| 649 |
vmem_breg: BUCK5 { |
| 650 |
regulator-name = "VMEM_1.2V"; |
| 651 |
regulator-min-microvolt = <1200000>; |
| 652 |
regulator-max-microvolt = <1200000>; |
| 653 |
regulator-always-on; |
| 654 |
}; |
| 655 |
|
| 656 |
vccsub_breg: BUCK7 { |
| 657 |
regulator-name = "VCC_SUB_2.0V"; |
| 658 |
regulator-min-microvolt = <2000000>; |
| 659 |
regulator-max-microvolt = <2000000>; |
| 660 |
regulator-always-on; |
| 661 |
}; |
| 662 |
|
| 663 |
safe1_sreg: ESAFEOUT1 { |
| 664 |
regulator-name = "SAFEOUT1"; |
| 665 |
}; |
| 666 |
|
| 667 |
safe2_sreg: ESAFEOUT2 { |
| 668 |
regulator-name = "SAFEOUT2"; |
| 669 |
regulator-boot-on; |
| 670 |
}; |
| 671 |
|
| 672 |
EN32KHZ_AP { |
| 673 |
regulator-name = "EN32KHZ_AP"; |
| 674 |
regulator-always-on; |
| 675 |
}; |
| 676 |
|
| 677 |
EN32KHZ_CP { |
| 678 |
regulator-name = "EN32KHZ_CP"; |
| 679 |
regulator-always-on; |
| 680 |
}; |
| 681 |
|
| 682 |
charger_reg: CHARGER { |
| 683 |
regulator-name = "CHARGER"; |
| 684 |
regulator-min-microamp = <200000>; |
| 685 |
regulator-max-microamp = <950000>; |
| 686 |
}; |
| 687 |
|
| 688 |
chargercv_reg: CHARGER_CV { |
| 689 |
regulator-name = "CHARGER_CV"; |
| 690 |
regulator-min-microvolt = <4200000>; |
| 691 |
regulator-max-microvolt = <4200000>; |
| 692 |
regulator-always-on; |
| 693 |
}; |
| 694 |
|
| 695 |
CHARGER_TOPOFF { |
| 696 |
regulator-name = "CHARGER_TOPOFF"; |
| 697 |
regulator-min-microamp = <200000>; |
| 698 |
regulator-max-microamp = <200000>; |
| 699 |
regulator-always-on; |
| 700 |
}; |
| 701 |
}; |
| 702 |
}; |
| 703 |
}; |
| 704 |
|
| 705 |
&i2c_7 { |
| 706 |
status = "okay"; |
| 707 |
|
| 708 |
samsung,i2c-sda-delay = <100>; |
| 709 |
samsung,i2c-slave-addr = <0x10>; |
| 710 |
samsung,i2c-max-bus-freq = <400000>; |
| 711 |
|
| 712 |
pinctrl-0 = <&i2c7_bus>; |
| 713 |
pinctrl-names = "default"; |
| 714 |
|
| 715 |
magnetometer@c { |
| 716 |
compatible = "asahi-kasei,ak8975"; |
| 717 |
reg = <0x0c>; |
| 718 |
|
| 719 |
gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; |
| 720 |
}; |
| 721 |
}; |
| 722 |
|
| 723 |
&pinctrl_0 { |
| 724 |
pinctrl-names = "default"; |
| 725 |
pinctrl-0 = <&sleep0>; |
| 726 |
|
| 727 |
sleep0: sleep-state { |
| 728 |
gpa0-0-pin { |
| 729 |
samsung,pins = "gpa0-0"; |
| 730 |
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; |
| 731 |
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; |
| 732 |
}; |
| 733 |
|
| 734 |
gpa0-1-pin { |
| 735 |
samsung,pins = "gpa0-1"; |
| 736 |
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>; |
| 737 |
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; |
| 738 |
}; |
| 739 |
|
| 740 |
gpa0-2-pin { |
| 741 |
samsung,pins = "gpa0-2"; |
| 742 |
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>; |
| 743 |
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; |
| 744 |
}; |
| 745 |
|
| 746 |
gpa0-3-pin { |
| 747 |
samsung,pins = "gpa0-3"; |
| 748 |
samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>; |
| 749 |
samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>; |
| 750 |
}; |
| 751 |
}; |
| 752 |
}; |
| 753 |
|
| 754 |
&pinctrl_1 { |
| 755 |
mhl_int: mhl-int-pins { |
| 756 |
samsung,pins = "gpf3-5"; |
| 757 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 758 |
}; |
| 759 |
|
| 760 |
i2c_mhl_bus: i2c-mhl-bus-pins { |
| 761 |
samsung,pins = "gpf0-4", "gpf0-6"; |
| 762 |
samsung,pin-function = <EXYNOS_PIN_FUNC_2>; |
| 763 |
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| 764 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 765 |
}; |
| 766 |
|
| 767 |
usb_sel: usb-sel-pins { |
| 768 |
samsung,pins = "gpl0-6"; |
| 769 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 770 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 771 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 772 |
samsung,pin-val = <0>; |
| 773 |
}; |
| 774 |
|
| 775 |
bt_en: bt-en-pins { |
| 776 |
samsung,pins = "gpl0-4"; |
| 777 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 778 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 779 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; |
| 780 |
samsung,pin-val = <0>; |
| 781 |
}; |
| 782 |
|
| 783 |
bt_res: bt-res-pins { |
| 784 |
samsung,pins = "gpl1-0"; |
| 785 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 786 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 787 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; |
| 788 |
samsung,pin-val = <0>; |
| 789 |
}; |
| 790 |
|
| 791 |
otg_gp: otg-gp-pins { |
| 792 |
samsung,pins = "gpx3-3"; |
| 793 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 794 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 795 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 796 |
samsung,pin-val = <0>; |
| 797 |
}; |
| 798 |
|
| 799 |
mag_mhl_gpio: mag-mhl-pins { |
| 800 |
samsung,pins = "gpd0-2"; |
| 801 |
samsung,pin-function = <EXYNOS_PIN_FUNC_3>; |
| 802 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 803 |
}; |
| 804 |
|
| 805 |
max8997_irq: max8997-irq-pins { |
| 806 |
samsung,pins = "gpx0-7"; |
| 807 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 808 |
}; |
| 809 |
|
| 810 |
max17042_fuel_irq: max17042-fuel-irq-pins { |
| 811 |
samsung,pins = "gpx2-3"; |
| 812 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 813 |
}; |
| 814 |
|
| 815 |
tsp224_irq: tsp224-irq-pins { |
| 816 |
samsung,pins = "gpx0-4"; |
| 817 |
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| 818 |
}; |
| 819 |
}; |
| 820 |
|
| 821 |
&rtc { |
| 822 |
status = "okay"; |
| 823 |
clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; |
| 824 |
clock-names = "rtc", "rtc_src"; |
| 825 |
}; |
| 826 |
|
| 827 |
&sdhci_0 { |
| 828 |
status = "okay"; |
| 829 |
|
| 830 |
bus-width = <8>; |
| 831 |
non-removable; |
| 832 |
vmmc-supply = <&vemmc_reg>; |
| 833 |
|
| 834 |
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>; |
| 835 |
pinctrl-names = "default"; |
| 836 |
}; |
| 837 |
|
| 838 |
&sdhci_2 { |
| 839 |
status = "okay"; |
| 840 |
|
| 841 |
bus-width = <4>; |
| 842 |
cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; |
| 843 |
vmmc-supply = <&vtf_reg>; |
| 844 |
|
| 845 |
pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>; |
| 846 |
pinctrl-names = "default"; |
| 847 |
}; |
| 848 |
|
| 849 |
&sdhci_3 { |
| 850 |
status = "okay"; |
| 851 |
|
| 852 |
#address-cells = <1>; |
| 853 |
#size-cells = <0>; |
| 854 |
|
| 855 |
non-removable; |
| 856 |
cap-power-off-card; |
| 857 |
bus-width = <4>; |
| 858 |
mmc-pwrseq = <&wlan_pwrseq>; |
| 859 |
vmmc-supply = <&vtf_reg>; |
| 860 |
|
| 861 |
pinctrl-names = "default"; |
| 862 |
pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; |
| 863 |
|
| 864 |
brcmf: wifi@1 { |
| 865 |
compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac"; |
| 866 |
reg = <1>; |
| 867 |
|
| 868 |
interrupt-parent = <&gpx2>; |
| 869 |
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; |
| 870 |
interrupt-names = "host-wake"; |
| 871 |
}; |
| 872 |
}; |
| 873 |
|
| 874 |
&serial_0 { |
| 875 |
status = "okay"; |
| 876 |
|
| 877 |
pinctrl-names = "default"; |
| 878 |
pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>; |
| 879 |
|
| 880 |
bluetooth { |
| 881 |
compatible = "brcm,bcm4330-bt"; |
| 882 |
|
| 883 |
shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>; |
| 884 |
reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>; |
| 885 |
device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; |
| 886 |
|
| 887 |
interrupt-parent = <&gpx2>; |
| 888 |
interrupts = <6 IRQ_TYPE_EDGE_FALLING>; |
| 889 |
interrupt-names = "host-wakeup"; |
| 890 |
}; |
| 891 |
}; |
| 892 |
|
| 893 |
&serial_1 { |
| 894 |
status = "okay"; |
| 895 |
}; |
| 896 |
|
| 897 |
&serial_2 { |
| 898 |
status = "okay"; |
| 899 |
}; |
| 900 |
|
| 901 |
&serial_3 { |
| 902 |
status = "okay"; |
| 903 |
}; |
| 904 |
|
| 905 |
&tmu { |
| 906 |
status = "okay"; |
| 907 |
}; |