| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
|
| 3 |
/dts-v1/; |
| 4 |
#include <dt-bindings/gpio/gpio.h> |
| 5 |
#include <dt-bindings/input/input.h> |
| 6 |
#include "s5pv210-aries.dtsi" |
| 7 |
|
| 8 |
/ { |
| 9 |
model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210"; |
| 10 |
compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210"; |
| 11 |
chassis-type = "handset"; |
| 12 |
|
| 13 |
chosen { |
| 14 |
stdout-path = &uart2; |
| 15 |
}; |
| 16 |
|
| 17 |
nand_pwrseq: nand-pwrseq { |
| 18 |
compatible = "mmc-pwrseq-simple"; |
| 19 |
reset-gpios = <&gpj2 7 GPIO_ACTIVE_LOW>; |
| 20 |
pinctrl-names = "default"; |
| 21 |
pinctrl-0 = <&massmemory_en>; |
| 22 |
}; |
| 23 |
|
| 24 |
gpio-keys { |
| 25 |
compatible = "gpio-keys"; |
| 26 |
|
| 27 |
key-power { |
| 28 |
label = "power"; |
| 29 |
gpios = <&gph2 6 GPIO_ACTIVE_LOW>; |
| 30 |
linux,code = <KEY_POWER>; |
| 31 |
wakeup-source; |
| 32 |
}; |
| 33 |
|
| 34 |
key-vol-down { |
| 35 |
label = "volume_down"; |
| 36 |
gpios = <&gph3 1 GPIO_ACTIVE_LOW>; |
| 37 |
linux,code = <KEY_VOLUMEDOWN>; |
| 38 |
}; |
| 39 |
|
| 40 |
key-vol-up { |
| 41 |
label = "volume_up"; |
| 42 |
gpios = <&gph3 2 GPIO_ACTIVE_LOW>; |
| 43 |
linux,code = <KEY_VOLUMEUP>; |
| 44 |
}; |
| 45 |
|
| 46 |
key-home { |
| 47 |
label = "home"; |
| 48 |
gpios = <&gph3 5 GPIO_ACTIVE_LOW>; |
| 49 |
linux,code = <KEY_HOME>; |
| 50 |
wakeup-source; |
| 51 |
}; |
| 52 |
}; |
| 53 |
|
| 54 |
i2c_fmradio: i2c-11 { |
| 55 |
compatible = "i2c-gpio"; |
| 56 |
sda-gpios = <&gpd1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 57 |
scl-gpios = <&gpd1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 58 |
i2c-gpio,delay-us = <2>; |
| 59 |
#address-cells = <1>; |
| 60 |
#size-cells = <0>; |
| 61 |
|
| 62 |
pinctrl-names = "default"; |
| 63 |
pinctrl-0 = <&fm_i2c_pins>; |
| 64 |
|
| 65 |
fmradio@10 { |
| 66 |
compatible = "silabs,si470x"; |
| 67 |
reg = <0x10>; |
| 68 |
interrupt-parent = <&gpj2>; |
| 69 |
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; |
| 70 |
reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>; |
| 71 |
|
| 72 |
pinctrl-names = "default"; |
| 73 |
pinctrl-0 = <&fm_irq &fm_rst>; |
| 74 |
}; |
| 75 |
}; |
| 76 |
|
| 77 |
micbias_reg: regulator-fixed-3 { |
| 78 |
compatible = "regulator-fixed"; |
| 79 |
regulator-name = "MICBIAS"; |
| 80 |
gpio = <&gpj4 2 GPIO_ACTIVE_HIGH>; |
| 81 |
enable-active-high; |
| 82 |
|
| 83 |
pinctrl-names = "default"; |
| 84 |
pinctrl-0 = <&micbias_reg_ena>; |
| 85 |
}; |
| 86 |
|
| 87 |
sound { |
| 88 |
compatible = "samsung,aries-wm8994"; |
| 89 |
|
| 90 |
model = "Aries"; |
| 91 |
|
| 92 |
extcon = <&fsa9480>; |
| 93 |
|
| 94 |
main-micbias-supply = <&micbias_reg>; |
| 95 |
headset-micbias-supply = <&micbias_reg>; |
| 96 |
|
| 97 |
earpath-sel-gpios = <&gpj2 6 GPIO_ACTIVE_HIGH>; |
| 98 |
|
| 99 |
io-channels = <&adc 3>; |
| 100 |
io-channel-names = "headset-detect"; |
| 101 |
headset-detect-gpios = <&gph0 6 GPIO_ACTIVE_LOW>; |
| 102 |
headset-key-gpios = <&gph3 6 GPIO_ACTIVE_HIGH>; |
| 103 |
|
| 104 |
audio-routing = "HP", "HPOUT1L", |
| 105 |
"HP", "HPOUT1R", |
| 106 |
|
| 107 |
"SPK", "SPKOUTLN", |
| 108 |
"SPK", "SPKOUTLP", |
| 109 |
|
| 110 |
"RCV", "HPOUT2N", |
| 111 |
"RCV", "HPOUT2P", |
| 112 |
|
| 113 |
"LINE", "LINEOUT2N", |
| 114 |
"LINE", "LINEOUT2P", |
| 115 |
|
| 116 |
"IN1LP", "Main Mic", |
| 117 |
"IN1LN", "Main Mic", |
| 118 |
|
| 119 |
"IN1RP", "Headset Mic", |
| 120 |
"IN1RN", "Headset Mic", |
| 121 |
|
| 122 |
"IN2LN", "FM In", |
| 123 |
"IN2RN", "FM In", |
| 124 |
|
| 125 |
"Modem Out", "Modem TX", |
| 126 |
"Modem RX", "Modem In", |
| 127 |
|
| 128 |
"Bluetooth SPK", "TX", |
| 129 |
"RX", "Bluetooth Mic"; |
| 130 |
|
| 131 |
pinctrl-names = "default"; |
| 132 |
pinctrl-0 = <&headset_det &earpath_sel>; |
| 133 |
|
| 134 |
cpu { |
| 135 |
sound-dai = <&i2s0>, <&bt_codec>; |
| 136 |
}; |
| 137 |
|
| 138 |
codec { |
| 139 |
sound-dai = <&wm8994>; |
| 140 |
}; |
| 141 |
}; |
| 142 |
}; |
| 143 |
|
| 144 |
&aliases { |
| 145 |
i2c8 = &i2c_fmradio; |
| 146 |
}; |
| 147 |
|
| 148 |
&pinctrl0 { |
| 149 |
pinctrl-names = "default"; |
| 150 |
pinctrl-0 = <&sleep_cfg>; |
| 151 |
|
| 152 |
fm_i2c_pins: fm-i2c-pins { |
| 153 |
samsung,pins = "gpd1-2", "gpd1-3"; |
| 154 |
samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; |
| 155 |
samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; |
| 156 |
}; |
| 157 |
|
| 158 |
headset_det: headset-det-pins { |
| 159 |
samsung,pins = "gph0-6", "gph3-6"; |
| 160 |
samsung,pin-function = <S5PV210_PIN_FUNC_F>; |
| 161 |
samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; |
| 162 |
}; |
| 163 |
|
| 164 |
fm_irq: fm-irq-pins { |
| 165 |
samsung,pins = "gpj2-4"; |
| 166 |
samsung,pin-function = <S5PV210_PIN_FUNC_INPUT>; |
| 167 |
samsung,pin-pud = <S5PV210_PIN_PULL_UP>; |
| 168 |
samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; |
| 169 |
}; |
| 170 |
|
| 171 |
fm_rst: fm-rst-pins { |
| 172 |
samsung,pins = "gpj2-5"; |
| 173 |
samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>; |
| 174 |
samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; |
| 175 |
samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; |
| 176 |
}; |
| 177 |
|
| 178 |
earpath_sel: earpath-sel-pins { |
| 179 |
samsung,pins = "gpj2-6"; |
| 180 |
samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; |
| 181 |
samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; |
| 182 |
}; |
| 183 |
|
| 184 |
massmemory_en: massmemory-en-pins { |
| 185 |
samsung,pins = "gpj2-7"; |
| 186 |
samsung,pin-function = <S5PV210_PIN_FUNC_OUTPUT>; |
| 187 |
samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; |
| 188 |
samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; |
| 189 |
}; |
| 190 |
|
| 191 |
micbias_reg_ena: micbias-reg-ena-pins { |
| 192 |
samsung,pins = "gpj4-2"; |
| 193 |
samsung,pin-pud = <S5PV210_PIN_PULL_NONE>; |
| 194 |
samsung,pin-drv = <S5PV210_PIN_DRV_LV1>; |
| 195 |
}; |
| 196 |
|
| 197 |
/* Based on CyanogenMod 3.0.101 kernel */ |
| 198 |
sleep_cfg: sleep-state { |
| 199 |
PIN_SLP(gpa0-0, PREV, NONE); |
| 200 |
PIN_SLP(gpa0-1, PREV, NONE); |
| 201 |
PIN_SLP(gpa0-2, PREV, NONE); |
| 202 |
PIN_SLP(gpa0-3, OUT1, NONE); |
| 203 |
PIN_SLP(gpa0-4, INPUT, DOWN); |
| 204 |
PIN_SLP(gpa0-5, OUT0, NONE); |
| 205 |
PIN_SLP(gpa0-6, INPUT, DOWN); |
| 206 |
PIN_SLP(gpa0-7, OUT1, NONE); |
| 207 |
|
| 208 |
PIN_SLP(gpa1-0, INPUT, DOWN); |
| 209 |
PIN_SLP(gpa1-1, OUT0, NONE); |
| 210 |
PIN_SLP(gpa1-2, INPUT, NONE); |
| 211 |
PIN_SLP(gpa1-3, OUT0, NONE); |
| 212 |
|
| 213 |
PIN_SLP(gpb-0, OUT0, NONE); |
| 214 |
PIN_SLP(gpb-1, OUT1, NONE); |
| 215 |
PIN_SLP(gpb-2, OUT0, NONE); |
| 216 |
PIN_SLP(gpb-3, PREV, NONE); |
| 217 |
PIN_SLP(gpb-4, INPUT, NONE); |
| 218 |
PIN_SLP(gpb-5, PREV, NONE); |
| 219 |
PIN_SLP(gpb-6, INPUT, DOWN); |
| 220 |
PIN_SLP(gpb-7, OUT0, NONE); |
| 221 |
|
| 222 |
PIN_SLP(gpc0-0, OUT0, NONE); |
| 223 |
PIN_SLP(gpc0-1, INPUT, DOWN); |
| 224 |
PIN_SLP(gpc0-2, OUT0, NONE); |
| 225 |
PIN_SLP(gpc0-3, INPUT, NONE); |
| 226 |
PIN_SLP(gpc0-4, OUT0, NONE); |
| 227 |
|
| 228 |
PIN_SLP(gpc1-0, INPUT, DOWN); |
| 229 |
PIN_SLP(gpc1-1, INPUT, DOWN); |
| 230 |
PIN_SLP(gpc1-2, INPUT, DOWN); |
| 231 |
PIN_SLP(gpc1-3, INPUT, DOWN); |
| 232 |
PIN_SLP(gpc1-4, INPUT, DOWN); |
| 233 |
|
| 234 |
PIN_SLP(gpd0-0, INPUT, DOWN); |
| 235 |
PIN_SLP(gpd0-1, OUT0, NONE); |
| 236 |
PIN_SLP(gpd0-2, INPUT, DOWN); |
| 237 |
PIN_SLP(gpd0-3, INPUT, DOWN); |
| 238 |
|
| 239 |
PIN_SLP(gpd1-0, INPUT, NONE); |
| 240 |
PIN_SLP(gpd1-1, INPUT, NONE); |
| 241 |
PIN_SLP(gpd1-2, INPUT, NONE); |
| 242 |
PIN_SLP(gpd1-3, INPUT, NONE); |
| 243 |
PIN_SLP(gpd1-4, INPUT, DOWN); |
| 244 |
PIN_SLP(gpd1-5, INPUT, DOWN); |
| 245 |
|
| 246 |
PIN_SLP(gpe0-0, INPUT, DOWN); |
| 247 |
PIN_SLP(gpe0-1, INPUT, DOWN); |
| 248 |
PIN_SLP(gpe0-2, INPUT, DOWN); |
| 249 |
PIN_SLP(gpe0-3, INPUT, DOWN); |
| 250 |
PIN_SLP(gpe0-4, INPUT, DOWN); |
| 251 |
PIN_SLP(gpe0-5, INPUT, DOWN); |
| 252 |
PIN_SLP(gpe0-6, INPUT, DOWN); |
| 253 |
PIN_SLP(gpe0-7, INPUT, DOWN); |
| 254 |
|
| 255 |
PIN_SLP(gpe1-0, INPUT, DOWN); |
| 256 |
PIN_SLP(gpe1-1, INPUT, DOWN); |
| 257 |
PIN_SLP(gpe1-2, INPUT, DOWN); |
| 258 |
PIN_SLP(gpe1-3, OUT0, NONE); |
| 259 |
PIN_SLP(gpe1-4, INPUT, DOWN); |
| 260 |
|
| 261 |
PIN_SLP(gpf0-0, OUT0, NONE); |
| 262 |
PIN_SLP(gpf0-1, OUT0, NONE); |
| 263 |
PIN_SLP(gpf0-2, OUT0, NONE); |
| 264 |
PIN_SLP(gpf0-3, OUT0, NONE); |
| 265 |
PIN_SLP(gpf0-4, OUT0, NONE); |
| 266 |
PIN_SLP(gpf0-5, OUT0, NONE); |
| 267 |
PIN_SLP(gpf0-6, OUT0, NONE); |
| 268 |
PIN_SLP(gpf0-7, OUT0, NONE); |
| 269 |
|
| 270 |
PIN_SLP(gpf1-0, OUT0, NONE); |
| 271 |
PIN_SLP(gpf1-1, OUT0, NONE); |
| 272 |
PIN_SLP(gpf1-2, OUT0, NONE); |
| 273 |
PIN_SLP(gpf1-3, OUT0, NONE); |
| 274 |
PIN_SLP(gpf1-4, OUT0, NONE); |
| 275 |
PIN_SLP(gpf1-5, OUT0, NONE); |
| 276 |
PIN_SLP(gpf1-6, OUT0, NONE); |
| 277 |
PIN_SLP(gpf1-7, OUT0, NONE); |
| 278 |
|
| 279 |
PIN_SLP(gpf2-0, OUT0, NONE); |
| 280 |
PIN_SLP(gpf2-1, OUT0, NONE); |
| 281 |
PIN_SLP(gpf2-2, OUT0, NONE); |
| 282 |
PIN_SLP(gpf2-3, OUT0, NONE); |
| 283 |
PIN_SLP(gpf2-4, OUT0, NONE); |
| 284 |
PIN_SLP(gpf2-5, OUT0, NONE); |
| 285 |
PIN_SLP(gpf2-6, OUT0, NONE); |
| 286 |
PIN_SLP(gpf2-7, OUT0, NONE); |
| 287 |
|
| 288 |
PIN_SLP(gpf3-0, OUT0, NONE); |
| 289 |
PIN_SLP(gpf3-1, OUT0, NONE); |
| 290 |
PIN_SLP(gpf3-2, OUT0, NONE); |
| 291 |
PIN_SLP(gpf3-3, OUT0, NONE); |
| 292 |
PIN_SLP(gpf3-4, PREV, NONE); |
| 293 |
PIN_SLP(gpf3-5, INPUT, DOWN); |
| 294 |
|
| 295 |
PIN_SLP(gpg0-0, OUT0, NONE); |
| 296 |
PIN_SLP(gpg0-1, INPUT, NONE); |
| 297 |
PIN_SLP(gpg0-2, INPUT, NONE); |
| 298 |
PIN_SLP(gpg0-3, INPUT, NONE); |
| 299 |
PIN_SLP(gpg0-4, INPUT, NONE); |
| 300 |
PIN_SLP(gpg0-5, INPUT, NONE); |
| 301 |
PIN_SLP(gpg0-6, INPUT, NONE); |
| 302 |
|
| 303 |
PIN_SLP(gpg1-0, OUT0, NONE); |
| 304 |
PIN_SLP(gpg1-1, OUT1, NONE); |
| 305 |
PIN_SLP(gpg1-2, PREV, NONE); |
| 306 |
PIN_SLP(gpg1-3, OUT1, NONE); |
| 307 |
PIN_SLP(gpg1-4, OUT1, NONE); |
| 308 |
PIN_SLP(gpg1-5, OUT1, NONE); |
| 309 |
PIN_SLP(gpg1-6, OUT1, NONE); |
| 310 |
|
| 311 |
PIN_SLP(gpg2-0, OUT0, NONE); |
| 312 |
PIN_SLP(gpg2-1, OUT0, NONE); |
| 313 |
PIN_SLP(gpg2-2, INPUT, NONE); |
| 314 |
PIN_SLP(gpg2-3, OUT0, NONE); |
| 315 |
PIN_SLP(gpg2-4, OUT0, NONE); |
| 316 |
PIN_SLP(gpg2-5, OUT0, NONE); |
| 317 |
PIN_SLP(gpg2-6, OUT0, NONE); |
| 318 |
|
| 319 |
PIN_SLP(gpg3-0, OUT1, NONE); |
| 320 |
PIN_SLP(gpg3-1, OUT0, NONE); |
| 321 |
PIN_SLP(gpg3-2, INPUT, NONE); |
| 322 |
PIN_SLP(gpg3-3, INPUT, DOWN); |
| 323 |
PIN_SLP(gpg3-4, OUT0, NONE); |
| 324 |
PIN_SLP(gpg3-5, OUT0, NONE); |
| 325 |
PIN_SLP(gpg3-6, INPUT, DOWN); |
| 326 |
|
| 327 |
PIN_SLP(gpi-0, PREV, NONE); |
| 328 |
PIN_SLP(gpi-1, INPUT, DOWN); |
| 329 |
PIN_SLP(gpi-2, PREV, NONE); |
| 330 |
PIN_SLP(gpi-3, PREV, NONE); |
| 331 |
PIN_SLP(gpi-4, PREV, NONE); |
| 332 |
PIN_SLP(gpi-5, INPUT, DOWN); |
| 333 |
PIN_SLP(gpi-6, INPUT, DOWN); |
| 334 |
|
| 335 |
PIN_SLP(gpj0-0, INPUT, NONE); |
| 336 |
PIN_SLP(gpj0-1, INPUT, NONE); |
| 337 |
PIN_SLP(gpj0-2, INPUT, NONE); |
| 338 |
PIN_SLP(gpj0-3, INPUT, NONE); |
| 339 |
PIN_SLP(gpj0-4, INPUT, NONE); |
| 340 |
PIN_SLP(gpj0-5, INPUT, DOWN); |
| 341 |
PIN_SLP(gpj0-6, OUT0, NONE); |
| 342 |
PIN_SLP(gpj0-7, INPUT, NONE); |
| 343 |
|
| 344 |
PIN_SLP(gpj1-0, INPUT, DOWN); |
| 345 |
PIN_SLP(gpj1-1, OUT0, NONE); |
| 346 |
PIN_SLP(gpj1-2, INPUT, DOWN); |
| 347 |
PIN_SLP(gpj1-3, PREV, NONE); |
| 348 |
PIN_SLP(gpj1-4, PREV, NONE); |
| 349 |
PIN_SLP(gpj1-5, OUT0, NONE); |
| 350 |
|
| 351 |
PIN_SLP(gpj2-0, INPUT, DOWN); |
| 352 |
PIN_SLP(gpj2-1, INPUT, DOWN); |
| 353 |
PIN_SLP(gpj2-2, OUT0, NONE); |
| 354 |
PIN_SLP(gpj2-3, INPUT, DOWN); |
| 355 |
PIN_SLP(gpj2-4, INPUT, UP); |
| 356 |
PIN_SLP(gpj2-5, PREV, NONE); |
| 357 |
PIN_SLP(gpj2-6, PREV, NONE); |
| 358 |
PIN_SLP(gpj2-7, OUT1, NONE); |
| 359 |
|
| 360 |
PIN_SLP(gpj3-0, INPUT, NONE); |
| 361 |
PIN_SLP(gpj3-1, INPUT, NONE); |
| 362 |
PIN_SLP(gpj3-2, OUT0, NONE); |
| 363 |
PIN_SLP(gpj3-3, INPUT, DOWN); |
| 364 |
PIN_SLP(gpj3-4, INPUT, NONE); |
| 365 |
PIN_SLP(gpj3-5, INPUT, NONE); |
| 366 |
PIN_SLP(gpj3-6, INPUT, NONE); |
| 367 |
PIN_SLP(gpj3-7, INPUT, NONE); |
| 368 |
|
| 369 |
PIN_SLP(gpj4-0, INPUT, NONE); |
| 370 |
PIN_SLP(gpj4-1, INPUT, DOWN); |
| 371 |
PIN_SLP(gpj4-2, PREV, NONE); |
| 372 |
PIN_SLP(gpj4-3, INPUT, NONE); |
| 373 |
PIN_SLP(gpj4-4, INPUT, DOWN); |
| 374 |
|
| 375 |
PIN_SLP(mp01-0, INPUT, DOWN); |
| 376 |
PIN_SLP(mp01-1, OUT0, NONE); |
| 377 |
PIN_SLP(mp01-2, INPUT, DOWN); |
| 378 |
PIN_SLP(mp01-3, INPUT, DOWN); |
| 379 |
PIN_SLP(mp01-4, OUT1, NONE); |
| 380 |
PIN_SLP(mp01-5, INPUT, DOWN); |
| 381 |
PIN_SLP(mp01-6, INPUT, DOWN); |
| 382 |
PIN_SLP(mp01-7, INPUT, DOWN); |
| 383 |
|
| 384 |
PIN_SLP(mp02-0, INPUT, DOWN); |
| 385 |
PIN_SLP(mp02-1, INPUT, DOWN); |
| 386 |
PIN_SLP(mp02-2, INPUT, NONE); |
| 387 |
PIN_SLP(mp02-3, INPUT, DOWN); |
| 388 |
|
| 389 |
PIN_SLP(mp03-0, INPUT, DOWN); |
| 390 |
PIN_SLP(mp03-1, INPUT, DOWN); |
| 391 |
PIN_SLP(mp03-2, OUT1, NONE); |
| 392 |
PIN_SLP(mp03-3, OUT0, NONE); |
| 393 |
PIN_SLP(mp03-4, INPUT, NONE); |
| 394 |
PIN_SLP(mp03-5, OUT1, NONE); |
| 395 |
PIN_SLP(mp03-6, INPUT, DOWN); |
| 396 |
PIN_SLP(mp03-7, INPUT, DOWN); |
| 397 |
|
| 398 |
PIN_SLP(mp04-0, INPUT, DOWN); |
| 399 |
PIN_SLP(mp04-1, OUT0, NONE); |
| 400 |
PIN_SLP(mp04-2, INPUT, DOWN); |
| 401 |
PIN_SLP(mp04-3, OUT0, NONE); |
| 402 |
PIN_SLP(mp04-4, INPUT, DOWN); |
| 403 |
PIN_SLP(mp04-5, INPUT, DOWN); |
| 404 |
PIN_SLP(mp04-6, OUT0, NONE); |
| 405 |
PIN_SLP(mp04-7, INPUT, DOWN); |
| 406 |
|
| 407 |
PIN_SLP(mp05-0, INPUT, NONE); |
| 408 |
PIN_SLP(mp05-1, INPUT, NONE); |
| 409 |
PIN_SLP(mp05-2, INPUT, NONE); |
| 410 |
PIN_SLP(mp05-3, INPUT, NONE); |
| 411 |
PIN_SLP(mp05-4, INPUT, DOWN); |
| 412 |
PIN_SLP(mp05-5, OUT0, NONE); |
| 413 |
PIN_SLP(mp05-6, INPUT, DOWN); |
| 414 |
PIN_SLP(mp05-7, PREV, NONE); |
| 415 |
|
| 416 |
PIN_SLP(mp06-0, INPUT, DOWN); |
| 417 |
PIN_SLP(mp06-1, INPUT, DOWN); |
| 418 |
PIN_SLP(mp06-2, INPUT, DOWN); |
| 419 |
PIN_SLP(mp06-3, INPUT, DOWN); |
| 420 |
PIN_SLP(mp06-4, INPUT, DOWN); |
| 421 |
PIN_SLP(mp06-5, INPUT, DOWN); |
| 422 |
PIN_SLP(mp06-6, INPUT, DOWN); |
| 423 |
PIN_SLP(mp06-7, INPUT, DOWN); |
| 424 |
|
| 425 |
PIN_SLP(mp07-0, INPUT, DOWN); |
| 426 |
PIN_SLP(mp07-1, INPUT, DOWN); |
| 427 |
PIN_SLP(mp07-2, INPUT, DOWN); |
| 428 |
PIN_SLP(mp07-3, INPUT, DOWN); |
| 429 |
PIN_SLP(mp07-4, INPUT, DOWN); |
| 430 |
PIN_SLP(mp07-5, INPUT, DOWN); |
| 431 |
PIN_SLP(mp07-6, INPUT, DOWN); |
| 432 |
PIN_SLP(mp07-7, INPUT, DOWN); |
| 433 |
}; |
| 434 |
}; |
| 435 |
|
| 436 |
&sdhci0 { |
| 437 |
bus-width = <4>; |
| 438 |
non-removable; |
| 439 |
mmc-pwrseq = <&nand_pwrseq>; |
| 440 |
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; |
| 441 |
pinctrl-names = "default"; |
| 442 |
status = "okay"; |
| 443 |
|
| 444 |
assigned-clocks = <&clocks MOUT_MMC0>, <&clocks SCLK_MMC0>; |
| 445 |
assigned-clock-rates = <0>, <52000000>; |
| 446 |
assigned-clock-parents = <&clocks MOUT_MPLL>; |
| 447 |
}; |