| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* TOPEET's Exynos4412 based itop board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2016 SUMOMO Computer Association |
| 6 |
* https://www.sumomo.mobi |
| 7 |
* Randy Li <[email protected]> |
| 8 |
* |
| 9 |
* Device tree source file for TOPEET iTop Exynos 4412 core board |
| 10 |
* which is based on Samsung's Exynos4412 SoC. |
| 11 |
*/ |
| 12 |
|
| 13 |
/dts-v1/; |
| 14 |
#include <dt-bindings/leds/common.h> |
| 15 |
#include <dt-bindings/pwm/pwm.h> |
| 16 |
#include <dt-bindings/sound/samsung-i2s.h> |
| 17 |
#include "exynos4412-itop-scp-core.dtsi" |
| 18 |
|
| 19 |
/ { |
| 20 |
model = "TOPEET iTop 4412 Elite board based on Exynos4412"; |
| 21 |
compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4"; |
| 22 |
|
| 23 |
aliases { |
| 24 |
mmc1 = &sdhci_2; |
| 25 |
}; |
| 26 |
|
| 27 |
chosen { |
| 28 |
bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait"; |
| 29 |
stdout-path = "serial2:115200n8"; |
| 30 |
}; |
| 31 |
|
| 32 |
leds { |
| 33 |
compatible = "gpio-leds"; |
| 34 |
|
| 35 |
led2 { |
| 36 |
function = LED_FUNCTION_HEARTBEAT; |
| 37 |
color = <LED_COLOR_ID_RED>; |
| 38 |
gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>; |
| 39 |
default-state = "off"; |
| 40 |
linux,default-trigger = "heartbeat"; |
| 41 |
}; |
| 42 |
|
| 43 |
led3 { |
| 44 |
label = "red:user"; |
| 45 |
color = <LED_COLOR_ID_RED>; |
| 46 |
gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>; |
| 47 |
default-state = "off"; |
| 48 |
}; |
| 49 |
}; |
| 50 |
|
| 51 |
gpio-keys { |
| 52 |
compatible = "gpio-keys"; |
| 53 |
|
| 54 |
key-home { |
| 55 |
label = "GPIO Key Home"; |
| 56 |
linux,code = <KEY_HOME>; |
| 57 |
gpios = <&gpx1 1 GPIO_ACTIVE_LOW>; |
| 58 |
}; |
| 59 |
|
| 60 |
key-back { |
| 61 |
label = "GPIO Key Back"; |
| 62 |
linux,code = <KEY_BACK>; |
| 63 |
gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; |
| 64 |
}; |
| 65 |
|
| 66 |
key-sleep { |
| 67 |
label = "GPIO Key Sleep"; |
| 68 |
linux,code = <KEY_POWER>; |
| 69 |
gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; |
| 70 |
}; |
| 71 |
|
| 72 |
key-vol-up { |
| 73 |
label = "GPIO Key Vol+"; |
| 74 |
linux,code = <KEY_UP>; |
| 75 |
gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; |
| 76 |
}; |
| 77 |
|
| 78 |
key-vol-down { |
| 79 |
label = "GPIO Key Vol-"; |
| 80 |
linux,code = <KEY_DOWN>; |
| 81 |
gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; |
| 82 |
}; |
| 83 |
}; |
| 84 |
|
| 85 |
sound { |
| 86 |
compatible = "simple-audio-card"; |
| 87 |
simple-audio-card,name = "wm-sound"; |
| 88 |
|
| 89 |
simple-audio-card,format = "i2s"; |
| 90 |
simple-audio-card,bitclock-master = <&link0_codec>; |
| 91 |
simple-audio-card,frame-master = <&link0_codec>; |
| 92 |
|
| 93 |
simple-audio-card,widgets = |
| 94 |
"Microphone", "Mic Jack", |
| 95 |
"Line", "Line In", |
| 96 |
"Line", "Line Out", |
| 97 |
"Speaker", "Speaker", |
| 98 |
"Headphone", "Headphone Jack"; |
| 99 |
simple-audio-card,routing = |
| 100 |
"Headphone Jack", "HP_L", |
| 101 |
"Headphone Jack", "HP_R", |
| 102 |
"Speaker", "SPK_LP", |
| 103 |
"Speaker", "SPK_LN", |
| 104 |
"Speaker", "SPK_RP", |
| 105 |
"Speaker", "SPK_RN", |
| 106 |
"LINPUT1", "Mic Jack", |
| 107 |
"LINPUT3", "Mic Jack", |
| 108 |
"RINPUT1", "Mic Jack", |
| 109 |
"RINPUT2", "Mic Jack"; |
| 110 |
|
| 111 |
simple-audio-card,cpu { |
| 112 |
sound-dai = <&i2s0 0>; |
| 113 |
}; |
| 114 |
|
| 115 |
link0_codec: simple-audio-card,codec { |
| 116 |
sound-dai = <&codec>; |
| 117 |
clocks = <&i2s0 CLK_I2S_CDCLK>; |
| 118 |
system-clock-frequency = <11289600>; |
| 119 |
}; |
| 120 |
}; |
| 121 |
|
| 122 |
beep { |
| 123 |
compatible = "pwm-beeper"; |
| 124 |
pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>; |
| 125 |
}; |
| 126 |
}; |
| 127 |
|
| 128 |
&adc { |
| 129 |
vdd-supply = <&ldo3_reg>; |
| 130 |
status = "okay"; |
| 131 |
}; |
| 132 |
|
| 133 |
&camera { |
| 134 |
pinctrl-0 = <&cam_port_a_clk_active>; |
| 135 |
pinctrl-names = "default"; |
| 136 |
status = "okay"; |
| 137 |
assigned-clocks = <&clock CLK_MOUT_CAM0>; |
| 138 |
assigned-clock-parents = <&clock CLK_XUSBXTI>; |
| 139 |
}; |
| 140 |
|
| 141 |
&clock_audss { |
| 142 |
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, |
| 143 |
<&clock_audss EXYNOS_MOUT_I2S>, |
| 144 |
<&clock_audss EXYNOS_DOUT_SRP>, |
| 145 |
<&clock_audss EXYNOS_DOUT_AUD_BUS>; |
| 146 |
assigned-clock-parents = <&clock CLK_FOUT_EPLL>, |
| 147 |
<&clock_audss EXYNOS_MOUT_AUDSS>; |
| 148 |
assigned-clock-rates = <0>, <0>, <112896000>, <11289600>; |
| 149 |
}; |
| 150 |
|
| 151 |
&ehci { |
| 152 |
status = "okay"; |
| 153 |
/* In order to reset USB ethernet */ |
| 154 |
samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; |
| 155 |
|
| 156 |
phys = <&exynos_usbphy 1>, <&exynos_usbphy 3>; |
| 157 |
phy-names = "host", "hsic1"; |
| 158 |
}; |
| 159 |
|
| 160 |
&exynos_usbphy { |
| 161 |
status = "okay"; |
| 162 |
}; |
| 163 |
|
| 164 |
&fimc_0 { |
| 165 |
status = "okay"; |
| 166 |
assigned-clocks = <&clock CLK_MOUT_FIMC0>, |
| 167 |
<&clock CLK_SCLK_FIMC0>; |
| 168 |
assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; |
| 169 |
assigned-clock-rates = <0>, <176000000>; |
| 170 |
}; |
| 171 |
|
| 172 |
&hsotg { |
| 173 |
dr_mode = "peripheral"; |
| 174 |
status = "okay"; |
| 175 |
}; |
| 176 |
|
| 177 |
&i2c_4 { |
| 178 |
samsung,i2c-sda-delay = <100>; |
| 179 |
samsung,i2c-slave-addr = <0x10>; |
| 180 |
samsung,i2c-max-bus-freq = <100000>; |
| 181 |
pinctrl-0 = <&i2c4_bus>; |
| 182 |
pinctrl-names = "default"; |
| 183 |
status = "okay"; |
| 184 |
|
| 185 |
codec: audio-codec@1a { |
| 186 |
compatible = "wlf,wm8960"; |
| 187 |
reg = <0x1a>; |
| 188 |
clocks = <&pmu_system_controller 0>; |
| 189 |
clock-names = "mclk"; |
| 190 |
wlf,shared-lrclk; |
| 191 |
#sound-dai-cells = <0>; |
| 192 |
}; |
| 193 |
}; |
| 194 |
|
| 195 |
&i2s0 { |
| 196 |
pinctrl-0 = <&i2s0_bus>; |
| 197 |
pinctrl-names = "default"; |
| 198 |
status = "okay"; |
| 199 |
}; |
| 200 |
|
| 201 |
&pinctrl_1 { |
| 202 |
ether-reset-pins { |
| 203 |
samsung,pins = "gpc0-1"; |
| 204 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 205 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 206 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 207 |
}; |
| 208 |
}; |
| 209 |
|
| 210 |
&pwm { |
| 211 |
status = "okay"; |
| 212 |
pinctrl-0 = <&pwm0_out>; |
| 213 |
pinctrl-names = "default"; |
| 214 |
samsung,pwm-outputs = <0>; |
| 215 |
}; |
| 216 |
|
| 217 |
&sdhci_2 { |
| 218 |
bus-width = <4>; |
| 219 |
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; |
| 220 |
pinctrl-names = "default"; |
| 221 |
cd-gpios = <&gpx0 7 GPIO_ACTIVE_LOW>; |
| 222 |
cap-sd-highspeed; |
| 223 |
vmmc-supply = <&ldo23_reg>; |
| 224 |
vqmmc-supply = <&ldo17_reg>; |
| 225 |
status = "okay"; |
| 226 |
}; |
| 227 |
|
| 228 |
&serial_1 { |
| 229 |
status = "okay"; |
| 230 |
}; |
| 231 |
|
| 232 |
&serial_2 { |
| 233 |
status = "okay"; |
| 234 |
}; |