| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Google Peach Pit Rev 6+ board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2014 Google, Inc |
| 6 |
*/ |
| 7 |
|
| 8 |
/dts-v1/; |
| 9 |
#include <dt-bindings/input/input.h> |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 12 |
#include <dt-bindings/clock/maxim,max77802.h> |
| 13 |
#include <dt-bindings/regulator/maxim,max77802.h> |
| 14 |
#include <dt-bindings/sound/samsung-i2s.h> |
| 15 |
#include "exynos5420.dtsi" |
| 16 |
#include "exynos5420-cpus.dtsi" |
| 17 |
|
| 18 |
/ { |
| 19 |
model = "Google Peach Pit Rev 6+"; |
| 20 |
|
| 21 |
compatible = "google,pit-rev16", |
| 22 |
"google,pit-rev15", "google,pit-rev14", |
| 23 |
"google,pit-rev13", "google,pit-rev12", |
| 24 |
"google,pit-rev11", "google,pit-rev10", |
| 25 |
"google,pit-rev9", "google,pit-rev8", |
| 26 |
"google,pit-rev7", "google,pit-rev6", |
| 27 |
"google,pit", "google,peach","samsung,exynos5420", |
| 28 |
"samsung,exynos5"; |
| 29 |
chassis-type = "laptop"; |
| 30 |
|
| 31 |
aliases { |
| 32 |
/* Assign 20 so we don't get confused w/ builtin ones */ |
| 33 |
i2c20 = &i2c_tunnel; |
| 34 |
mmc0 = &mmc_0; /* eMMC */ |
| 35 |
mmc1 = &mmc_2; /* uSD */ |
| 36 |
mmc2 = &mmc_1; /* WiFi */ |
| 37 |
}; |
| 38 |
|
| 39 |
backlight: backlight { |
| 40 |
compatible = "pwm-backlight"; |
| 41 |
pwms = <&pwm 0 1000000 0>; |
| 42 |
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; |
| 43 |
default-brightness-level = <7>; |
| 44 |
power-supply = <&tps65090_fet1>; |
| 45 |
pinctrl-0 = <&pwm0_out>; |
| 46 |
pinctrl-names = "default"; |
| 47 |
}; |
| 48 |
|
| 49 |
chosen { |
| 50 |
stdout-path = "serial3:115200n8"; |
| 51 |
}; |
| 52 |
|
| 53 |
fixed-rate-clocks { |
| 54 |
oscclk { |
| 55 |
compatible = "samsung,exynos5420-oscclk"; |
| 56 |
clock-frequency = <24000000>; |
| 57 |
}; |
| 58 |
}; |
| 59 |
|
| 60 |
gpio-keys { |
| 61 |
compatible = "gpio-keys"; |
| 62 |
|
| 63 |
pinctrl-names = "default"; |
| 64 |
pinctrl-0 = <&power_key_irq &lid_irq>; |
| 65 |
|
| 66 |
power-key { |
| 67 |
label = "Power"; |
| 68 |
gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; |
| 69 |
linux,code = <KEY_POWER>; |
| 70 |
wakeup-source; |
| 71 |
}; |
| 72 |
|
| 73 |
lid-switch { |
| 74 |
label = "Lid"; |
| 75 |
gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; |
| 76 |
linux,input-type = <5>; /* EV_SW */ |
| 77 |
linux,code = <0>; /* SW_LID */ |
| 78 |
debounce-interval = <1>; |
| 79 |
wakeup-source; |
| 80 |
}; |
| 81 |
}; |
| 82 |
|
| 83 |
memory@20000000 { |
| 84 |
device_type = "memory"; |
| 85 |
reg = <0x20000000 0x80000000>; |
| 86 |
}; |
| 87 |
|
| 88 |
sound { |
| 89 |
compatible = "google,snow-audio-max98090"; |
| 90 |
|
| 91 |
samsung,model = "Peach-Pit-I2S-MAX98090"; |
| 92 |
samsung,i2s-controller = <&i2s0>; |
| 93 |
samsung,audio-codec = <&max98090>; |
| 94 |
|
| 95 |
cpu { |
| 96 |
sound-dai = <&i2s0 0>; |
| 97 |
}; |
| 98 |
|
| 99 |
codec { |
| 100 |
sound-dai = <&max98090>, <&hdmi>; |
| 101 |
}; |
| 102 |
}; |
| 103 |
|
| 104 |
usb300_vbus_reg: regulator-usb300 { |
| 105 |
compatible = "regulator-fixed"; |
| 106 |
regulator-name = "P5.0V_USB3CON0"; |
| 107 |
regulator-min-microvolt = <5000000>; |
| 108 |
regulator-max-microvolt = <5000000>; |
| 109 |
gpio = <&gph0 0 GPIO_ACTIVE_HIGH>; |
| 110 |
pinctrl-names = "default"; |
| 111 |
pinctrl-0 = <&usb300_vbus_en>; |
| 112 |
enable-active-high; |
| 113 |
}; |
| 114 |
|
| 115 |
usb301_vbus_reg: regulator-usb301 { |
| 116 |
compatible = "regulator-fixed"; |
| 117 |
regulator-name = "P5.0V_USB3CON1"; |
| 118 |
regulator-min-microvolt = <5000000>; |
| 119 |
regulator-max-microvolt = <5000000>; |
| 120 |
gpio = <&gph0 1 GPIO_ACTIVE_HIGH>; |
| 121 |
pinctrl-names = "default"; |
| 122 |
pinctrl-0 = <&usb301_vbus_en>; |
| 123 |
enable-active-high; |
| 124 |
}; |
| 125 |
|
| 126 |
vbat: fixed-regulator { |
| 127 |
compatible = "regulator-fixed"; |
| 128 |
regulator-name = "vbat-supply"; |
| 129 |
regulator-boot-on; |
| 130 |
regulator-always-on; |
| 131 |
}; |
| 132 |
|
| 133 |
panel: panel { |
| 134 |
compatible = "auo,b116xw03"; |
| 135 |
power-supply = <&tps65090_fet6>; |
| 136 |
backlight = <&backlight>; |
| 137 |
|
| 138 |
port { |
| 139 |
panel_in: endpoint { |
| 140 |
remote-endpoint = <&bridge_out>; |
| 141 |
}; |
| 142 |
}; |
| 143 |
}; |
| 144 |
|
| 145 |
mmc1_pwrseq: mmc1-pwrseq { |
| 146 |
compatible = "mmc-pwrseq-simple"; |
| 147 |
reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */ |
| 148 |
clocks = <&max77802 MAX77802_CLK_32K_CP>; |
| 149 |
clock-names = "ext_clock"; |
| 150 |
}; |
| 151 |
}; |
| 152 |
|
| 153 |
&adc { |
| 154 |
status = "okay"; |
| 155 |
vdd-supply = <&ldo9_reg>; |
| 156 |
}; |
| 157 |
|
| 158 |
&clock_audss { |
| 159 |
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; |
| 160 |
assigned-clock-parents = <&clock CLK_MAU_EPLL>; |
| 161 |
}; |
| 162 |
|
| 163 |
&cpu0 { |
| 164 |
cpu-supply = <&buck2_reg>; |
| 165 |
}; |
| 166 |
|
| 167 |
&cpu4 { |
| 168 |
cpu-supply = <&buck6_reg>; |
| 169 |
}; |
| 170 |
|
| 171 |
&dp { |
| 172 |
status = "okay"; |
| 173 |
pinctrl-names = "default"; |
| 174 |
pinctrl-0 = <&dp_hpd_gpio>; |
| 175 |
samsung,color-space = <0>; |
| 176 |
samsung,color-depth = <1>; |
| 177 |
samsung,link-rate = <0x06>; |
| 178 |
samsung,lane-count = <2>; |
| 179 |
hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; |
| 180 |
|
| 181 |
ports { |
| 182 |
port { |
| 183 |
dp_out: endpoint { |
| 184 |
remote-endpoint = <&bridge_in>; |
| 185 |
}; |
| 186 |
}; |
| 187 |
}; |
| 188 |
}; |
| 189 |
|
| 190 |
&fimd { |
| 191 |
status = "okay"; |
| 192 |
samsung,invert-vclk; |
| 193 |
}; |
| 194 |
|
| 195 |
&hdmi { |
| 196 |
status = "okay"; |
| 197 |
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
| 198 |
pinctrl-names = "default"; |
| 199 |
pinctrl-0 = <&hdmi_hpd_irq>; |
| 200 |
ddc = <&i2c_2>; |
| 201 |
|
| 202 |
hdmi-en-supply = <&tps65090_fet7>; |
| 203 |
vdd-supply = <&ldo8_reg>; |
| 204 |
vdd_osc-supply = <&ldo10_reg>; |
| 205 |
vdd_pll-supply = <&ldo8_reg>; |
| 206 |
}; |
| 207 |
|
| 208 |
&hsi2c_4 { |
| 209 |
status = "okay"; |
| 210 |
clock-frequency = <400000>; |
| 211 |
|
| 212 |
max77802: pmic@9 { |
| 213 |
compatible = "maxim,max77802"; |
| 214 |
interrupt-parent = <&gpx3>; |
| 215 |
interrupts = <1 IRQ_TYPE_NONE>; |
| 216 |
pinctrl-names = "default"; |
| 217 |
pinctrl-0 = <&max77802_irq>, <&pmic_selb>, |
| 218 |
<&pmic_dvs_1>, <&pmic_dvs_2>; |
| 219 |
wakeup-source; |
| 220 |
reg = <0x9>; |
| 221 |
#clock-cells = <1>; |
| 222 |
|
| 223 |
inb1-supply = <&tps65090_dcdc2>; |
| 224 |
inb2-supply = <&tps65090_dcdc1>; |
| 225 |
inb3-supply = <&tps65090_dcdc2>; |
| 226 |
inb4-supply = <&tps65090_dcdc2>; |
| 227 |
inb5-supply = <&tps65090_dcdc1>; |
| 228 |
inb6-supply = <&tps65090_dcdc2>; |
| 229 |
inb7-supply = <&tps65090_dcdc1>; |
| 230 |
inb8-supply = <&tps65090_dcdc1>; |
| 231 |
inb9-supply = <&tps65090_dcdc1>; |
| 232 |
inb10-supply = <&tps65090_dcdc1>; |
| 233 |
|
| 234 |
inl1-supply = <&buck5_reg>; |
| 235 |
inl2-supply = <&buck7_reg>; |
| 236 |
inl3-supply = <&buck9_reg>; |
| 237 |
inl4-supply = <&buck9_reg>; |
| 238 |
inl5-supply = <&buck9_reg>; |
| 239 |
inl6-supply = <&tps65090_dcdc2>; |
| 240 |
inl7-supply = <&buck9_reg>; |
| 241 |
inl9-supply = <&tps65090_dcdc2>; |
| 242 |
inl10-supply = <&buck7_reg>; |
| 243 |
|
| 244 |
regulators { |
| 245 |
buck1_reg: BUCK1 { |
| 246 |
regulator-name = "vdd_mif"; |
| 247 |
regulator-min-microvolt = <800000>; |
| 248 |
regulator-max-microvolt = <1300000>; |
| 249 |
regulator-always-on; |
| 250 |
regulator-boot-on; |
| 251 |
regulator-ramp-delay = <12500>; |
| 252 |
regulator-state-mem { |
| 253 |
regulator-off-in-suspend; |
| 254 |
}; |
| 255 |
}; |
| 256 |
|
| 257 |
buck2_reg: BUCK2 { |
| 258 |
regulator-name = "vdd_arm"; |
| 259 |
regulator-min-microvolt = <800000>; |
| 260 |
regulator-max-microvolt = <1500000>; |
| 261 |
regulator-always-on; |
| 262 |
regulator-boot-on; |
| 263 |
regulator-ramp-delay = <12500>; |
| 264 |
regulator-state-mem { |
| 265 |
regulator-off-in-suspend; |
| 266 |
}; |
| 267 |
}; |
| 268 |
|
| 269 |
buck3_reg: BUCK3 { |
| 270 |
regulator-name = "vdd_int"; |
| 271 |
regulator-min-microvolt = <800000>; |
| 272 |
regulator-max-microvolt = <1400000>; |
| 273 |
regulator-always-on; |
| 274 |
regulator-boot-on; |
| 275 |
regulator-ramp-delay = <12500>; |
| 276 |
regulator-state-mem { |
| 277 |
regulator-off-in-suspend; |
| 278 |
}; |
| 279 |
}; |
| 280 |
|
| 281 |
buck4_reg: BUCK4 { |
| 282 |
regulator-name = "vdd_g3d"; |
| 283 |
regulator-min-microvolt = <700000>; |
| 284 |
regulator-max-microvolt = <1400000>; |
| 285 |
regulator-always-on; |
| 286 |
regulator-boot-on; |
| 287 |
regulator-ramp-delay = <12500>; |
| 288 |
regulator-state-mem { |
| 289 |
regulator-off-in-suspend; |
| 290 |
}; |
| 291 |
}; |
| 292 |
|
| 293 |
buck5_reg: BUCK5 { |
| 294 |
regulator-name = "vdd_1v2"; |
| 295 |
regulator-min-microvolt = <1200000>; |
| 296 |
regulator-max-microvolt = <1200000>; |
| 297 |
regulator-boot-on; |
| 298 |
regulator-state-mem { |
| 299 |
regulator-off-in-suspend; |
| 300 |
}; |
| 301 |
}; |
| 302 |
|
| 303 |
buck6_reg: BUCK6 { |
| 304 |
regulator-name = "vdd_kfc"; |
| 305 |
regulator-min-microvolt = <800000>; |
| 306 |
regulator-max-microvolt = <1500000>; |
| 307 |
regulator-always-on; |
| 308 |
regulator-boot-on; |
| 309 |
regulator-ramp-delay = <12500>; |
| 310 |
regulator-state-mem { |
| 311 |
regulator-off-in-suspend; |
| 312 |
}; |
| 313 |
}; |
| 314 |
|
| 315 |
buck7_reg: BUCK7 { |
| 316 |
regulator-name = "vdd_1v35"; |
| 317 |
regulator-min-microvolt = <1350000>; |
| 318 |
regulator-max-microvolt = <1350000>; |
| 319 |
regulator-always-on; |
| 320 |
regulator-boot-on; |
| 321 |
regulator-state-mem { |
| 322 |
regulator-on-in-suspend; |
| 323 |
}; |
| 324 |
}; |
| 325 |
|
| 326 |
buck8_reg: BUCK8 { |
| 327 |
regulator-name = "vdd_emmc"; |
| 328 |
regulator-min-microvolt = <2850000>; |
| 329 |
regulator-max-microvolt = <2850000>; |
| 330 |
regulator-always-on; |
| 331 |
regulator-boot-on; |
| 332 |
regulator-state-mem { |
| 333 |
regulator-off-in-suspend; |
| 334 |
}; |
| 335 |
}; |
| 336 |
|
| 337 |
buck9_reg: BUCK9 { |
| 338 |
regulator-name = "vdd_2v"; |
| 339 |
regulator-min-microvolt = <2000000>; |
| 340 |
regulator-max-microvolt = <2000000>; |
| 341 |
regulator-always-on; |
| 342 |
regulator-boot-on; |
| 343 |
regulator-state-mem { |
| 344 |
regulator-on-in-suspend; |
| 345 |
}; |
| 346 |
}; |
| 347 |
|
| 348 |
buck10_reg: BUCK10 { |
| 349 |
regulator-name = "vdd_1v8"; |
| 350 |
regulator-min-microvolt = <1800000>; |
| 351 |
regulator-max-microvolt = <1800000>; |
| 352 |
regulator-always-on; |
| 353 |
regulator-boot-on; |
| 354 |
regulator-state-mem { |
| 355 |
regulator-on-in-suspend; |
| 356 |
}; |
| 357 |
}; |
| 358 |
|
| 359 |
ldo1_reg: LDO1 { |
| 360 |
regulator-name = "vdd_1v0"; |
| 361 |
regulator-min-microvolt = <1000000>; |
| 362 |
regulator-max-microvolt = <1000000>; |
| 363 |
regulator-always-on; |
| 364 |
regulator-state-mem { |
| 365 |
regulator-on-in-suspend; |
| 366 |
regulator-mode = <MAX77802_OPMODE_LP>; |
| 367 |
}; |
| 368 |
}; |
| 369 |
|
| 370 |
ldo2_reg: LDO2 { |
| 371 |
regulator-name = "vdd_1v2_2"; |
| 372 |
regulator-min-microvolt = <1200000>; |
| 373 |
regulator-max-microvolt = <1200000>; |
| 374 |
}; |
| 375 |
|
| 376 |
ldo3_reg: LDO3 { |
| 377 |
regulator-name = "vdd_1v8_3"; |
| 378 |
regulator-min-microvolt = <1800000>; |
| 379 |
regulator-max-microvolt = <1800000>; |
| 380 |
regulator-always-on; |
| 381 |
regulator-state-mem { |
| 382 |
regulator-on-in-suspend; |
| 383 |
regulator-mode = <MAX77802_OPMODE_LP>; |
| 384 |
}; |
| 385 |
}; |
| 386 |
|
| 387 |
vqmmc_sdcard: ldo4_reg: LDO4 { |
| 388 |
regulator-name = "vdd_sd"; |
| 389 |
regulator-min-microvolt = <1800000>; |
| 390 |
regulator-max-microvolt = <2800000>; |
| 391 |
regulator-always-on; |
| 392 |
regulator-state-mem { |
| 393 |
regulator-off-in-suspend; |
| 394 |
}; |
| 395 |
}; |
| 396 |
|
| 397 |
ldo5_reg: LDO5 { |
| 398 |
regulator-name = "vdd_1v8_5"; |
| 399 |
regulator-min-microvolt = <1800000>; |
| 400 |
regulator-max-microvolt = <1800000>; |
| 401 |
regulator-always-on; |
| 402 |
regulator-state-mem { |
| 403 |
regulator-off-in-suspend; |
| 404 |
}; |
| 405 |
}; |
| 406 |
|
| 407 |
ldo6_reg: LDO6 { |
| 408 |
regulator-name = "vdd_1v8_6"; |
| 409 |
regulator-min-microvolt = <1800000>; |
| 410 |
regulator-max-microvolt = <1800000>; |
| 411 |
regulator-always-on; |
| 412 |
regulator-state-mem { |
| 413 |
regulator-off-in-suspend; |
| 414 |
}; |
| 415 |
}; |
| 416 |
|
| 417 |
ldo7_reg: LDO7 { |
| 418 |
regulator-name = "vdd_1v8_7"; |
| 419 |
regulator-min-microvolt = <1800000>; |
| 420 |
regulator-max-microvolt = <1800000>; |
| 421 |
}; |
| 422 |
|
| 423 |
ldo8_reg: LDO8 { |
| 424 |
regulator-name = "vdd_ldo8"; |
| 425 |
regulator-min-microvolt = <1000000>; |
| 426 |
regulator-max-microvolt = <1000000>; |
| 427 |
regulator-always-on; |
| 428 |
regulator-state-mem { |
| 429 |
regulator-off-in-suspend; |
| 430 |
}; |
| 431 |
}; |
| 432 |
|
| 433 |
ldo9_reg: LDO9 { |
| 434 |
regulator-name = "vdd_ldo9"; |
| 435 |
regulator-min-microvolt = <1800000>; |
| 436 |
regulator-max-microvolt = <1800000>; |
| 437 |
regulator-state-mem { |
| 438 |
regulator-on-in-suspend; |
| 439 |
regulator-mode = <MAX77802_OPMODE_LP>; |
| 440 |
}; |
| 441 |
}; |
| 442 |
|
| 443 |
ldo10_reg: LDO10 { |
| 444 |
regulator-name = "vdd_ldo10"; |
| 445 |
regulator-min-microvolt = <1800000>; |
| 446 |
regulator-max-microvolt = <1800000>; |
| 447 |
regulator-always-on; |
| 448 |
regulator-state-mem { |
| 449 |
regulator-off-in-suspend; |
| 450 |
}; |
| 451 |
}; |
| 452 |
|
| 453 |
ldo11_reg: LDO11 { |
| 454 |
regulator-name = "vdd_ldo11"; |
| 455 |
regulator-min-microvolt = <1800000>; |
| 456 |
regulator-max-microvolt = <1800000>; |
| 457 |
regulator-always-on; |
| 458 |
regulator-state-mem { |
| 459 |
regulator-on-in-suspend; |
| 460 |
regulator-mode = <MAX77802_OPMODE_LP>; |
| 461 |
}; |
| 462 |
}; |
| 463 |
|
| 464 |
ldo12_reg: LDO12 { |
| 465 |
regulator-name = "vdd_ldo12"; |
| 466 |
regulator-min-microvolt = <3000000>; |
| 467 |
regulator-max-microvolt = <3000000>; |
| 468 |
regulator-always-on; |
| 469 |
regulator-state-mem { |
| 470 |
regulator-off-in-suspend; |
| 471 |
}; |
| 472 |
}; |
| 473 |
|
| 474 |
ldo13_reg: LDO13 { |
| 475 |
regulator-name = "vdd_ldo13"; |
| 476 |
regulator-min-microvolt = <1800000>; |
| 477 |
regulator-max-microvolt = <1800000>; |
| 478 |
regulator-always-on; |
| 479 |
regulator-state-mem { |
| 480 |
regulator-on-in-suspend; |
| 481 |
regulator-mode = <MAX77802_OPMODE_LP>; |
| 482 |
}; |
| 483 |
}; |
| 484 |
|
| 485 |
ldo14_reg: LDO14 { |
| 486 |
regulator-name = "vdd_ldo14"; |
| 487 |
regulator-min-microvolt = <1800000>; |
| 488 |
regulator-max-microvolt = <1800000>; |
| 489 |
regulator-always-on; |
| 490 |
regulator-state-mem { |
| 491 |
regulator-off-in-suspend; |
| 492 |
}; |
| 493 |
}; |
| 494 |
|
| 495 |
ldo15_reg: LDO15 { |
| 496 |
regulator-name = "vdd_ldo15"; |
| 497 |
regulator-min-microvolt = <1000000>; |
| 498 |
regulator-max-microvolt = <1000000>; |
| 499 |
regulator-always-on; |
| 500 |
regulator-state-mem { |
| 501 |
regulator-off-in-suspend; |
| 502 |
}; |
| 503 |
}; |
| 504 |
|
| 505 |
ldo17_reg: LDO17 { |
| 506 |
regulator-name = "vdd_g3ds"; |
| 507 |
regulator-min-microvolt = <900000>; |
| 508 |
regulator-max-microvolt = <1400000>; |
| 509 |
regulator-always-on; |
| 510 |
regulator-state-mem { |
| 511 |
regulator-off-in-suspend; |
| 512 |
}; |
| 513 |
}; |
| 514 |
|
| 515 |
ldo18_reg: LDO18 { |
| 516 |
regulator-name = "ldo_18"; |
| 517 |
regulator-min-microvolt = <1800000>; |
| 518 |
regulator-max-microvolt = <1800000>; |
| 519 |
}; |
| 520 |
|
| 521 |
ldo19_reg: LDO19 { |
| 522 |
regulator-name = "ldo_19"; |
| 523 |
regulator-min-microvolt = <1800000>; |
| 524 |
regulator-max-microvolt = <1800000>; |
| 525 |
}; |
| 526 |
|
| 527 |
ldo20_reg: LDO20 { |
| 528 |
regulator-name = "ldo_20"; |
| 529 |
regulator-min-microvolt = <1800000>; |
| 530 |
regulator-max-microvolt = <1800000>; |
| 531 |
regulator-always-on; |
| 532 |
}; |
| 533 |
|
| 534 |
ldo21_reg: LDO21 { |
| 535 |
regulator-name = "ldo_21"; |
| 536 |
regulator-min-microvolt = <2800000>; |
| 537 |
regulator-max-microvolt = <2800000>; |
| 538 |
}; |
| 539 |
|
| 540 |
ldo23_reg: LDO23 { |
| 541 |
regulator-name = "ldo_23"; |
| 542 |
regulator-min-microvolt = <3300000>; |
| 543 |
regulator-max-microvolt = <3300000>; |
| 544 |
}; |
| 545 |
ldo24_reg: LDO24 { |
| 546 |
regulator-name = "ldo_24"; |
| 547 |
regulator-min-microvolt = <2800000>; |
| 548 |
regulator-max-microvolt = <2800000>; |
| 549 |
}; |
| 550 |
|
| 551 |
ldo25_reg: LDO25 { |
| 552 |
regulator-name = "ldo_25"; |
| 553 |
regulator-min-microvolt = <3300000>; |
| 554 |
regulator-max-microvolt = <3300000>; |
| 555 |
}; |
| 556 |
|
| 557 |
ldo26_reg: LDO26 { |
| 558 |
regulator-name = "ldo_26"; |
| 559 |
regulator-min-microvolt = <1200000>; |
| 560 |
regulator-max-microvolt = <1200000>; |
| 561 |
}; |
| 562 |
|
| 563 |
ldo27_reg: LDO27 { |
| 564 |
regulator-name = "ldo_27"; |
| 565 |
regulator-min-microvolt = <1200000>; |
| 566 |
regulator-max-microvolt = <1200000>; |
| 567 |
}; |
| 568 |
|
| 569 |
ldo28_reg: LDO28 { |
| 570 |
regulator-name = "ldo_28"; |
| 571 |
regulator-min-microvolt = <1800000>; |
| 572 |
regulator-max-microvolt = <1800000>; |
| 573 |
}; |
| 574 |
|
| 575 |
ldo29_reg: LDO29 { |
| 576 |
regulator-name = "ldo_29"; |
| 577 |
regulator-min-microvolt = <1800000>; |
| 578 |
regulator-max-microvolt = <1800000>; |
| 579 |
}; |
| 580 |
|
| 581 |
ldo30_reg: LDO30 { |
| 582 |
regulator-name = "vdd_mifs"; |
| 583 |
regulator-min-microvolt = <1000000>; |
| 584 |
regulator-max-microvolt = <1000000>; |
| 585 |
regulator-always-on; |
| 586 |
regulator-state-mem { |
| 587 |
regulator-off-in-suspend; |
| 588 |
}; |
| 589 |
}; |
| 590 |
|
| 591 |
ldo32_reg: LDO32 { |
| 592 |
regulator-name = "ldo_32"; |
| 593 |
regulator-min-microvolt = <3000000>; |
| 594 |
regulator-max-microvolt = <3000000>; |
| 595 |
}; |
| 596 |
|
| 597 |
ldo33_reg: LDO33 { |
| 598 |
regulator-name = "ldo_33"; |
| 599 |
regulator-min-microvolt = <2800000>; |
| 600 |
regulator-max-microvolt = <2800000>; |
| 601 |
}; |
| 602 |
|
| 603 |
ldo34_reg: LDO34 { |
| 604 |
regulator-name = "ldo_34"; |
| 605 |
regulator-min-microvolt = <3000000>; |
| 606 |
regulator-max-microvolt = <3000000>; |
| 607 |
}; |
| 608 |
|
| 609 |
ldo35_reg: LDO35 { |
| 610 |
regulator-name = "ldo_35"; |
| 611 |
regulator-min-microvolt = <1200000>; |
| 612 |
regulator-max-microvolt = <1200000>; |
| 613 |
}; |
| 614 |
}; |
| 615 |
}; |
| 616 |
}; |
| 617 |
|
| 618 |
&hsi2c_7 { |
| 619 |
status = "okay"; |
| 620 |
clock-frequency = <400000>; |
| 621 |
|
| 622 |
max98090: audio-codec@10 { |
| 623 |
compatible = "maxim,max98090"; |
| 624 |
reg = <0x10>; |
| 625 |
interrupts = <2 IRQ_TYPE_NONE>; |
| 626 |
interrupt-parent = <&gpx0>; |
| 627 |
pinctrl-names = "default"; |
| 628 |
pinctrl-0 = <&max98090_irq>; |
| 629 |
clocks = <&pmu_system_controller 0>; |
| 630 |
clock-names = "mclk"; |
| 631 |
#sound-dai-cells = <0>; |
| 632 |
}; |
| 633 |
|
| 634 |
light-sensor@44 { |
| 635 |
compatible = "isil,isl29018"; |
| 636 |
reg = <0x44>; |
| 637 |
vcc-supply = <&tps65090_fet5>; |
| 638 |
}; |
| 639 |
|
| 640 |
ps8625: lvds-bridge@48 { |
| 641 |
compatible = "parade,ps8625"; |
| 642 |
reg = <0x48>; |
| 643 |
sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; |
| 644 |
reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>; |
| 645 |
lane-count = <2>; |
| 646 |
use-external-pwm; |
| 647 |
|
| 648 |
ports { |
| 649 |
#address-cells = <1>; |
| 650 |
#size-cells = <0>; |
| 651 |
|
| 652 |
port@0 { |
| 653 |
reg = <0>; |
| 654 |
|
| 655 |
bridge_out: endpoint { |
| 656 |
remote-endpoint = <&panel_in>; |
| 657 |
}; |
| 658 |
}; |
| 659 |
|
| 660 |
port@1 { |
| 661 |
reg = <1>; |
| 662 |
|
| 663 |
bridge_in: endpoint { |
| 664 |
remote-endpoint = <&dp_out>; |
| 665 |
}; |
| 666 |
}; |
| 667 |
}; |
| 668 |
|
| 669 |
}; |
| 670 |
}; |
| 671 |
|
| 672 |
&hsi2c_8 { |
| 673 |
status = "okay"; |
| 674 |
clock-frequency = <333000>; |
| 675 |
|
| 676 |
/* Atmel mXT336S */ |
| 677 |
trackpad@4b { |
| 678 |
compatible = "atmel,maxtouch"; |
| 679 |
reg = <0x4b>; |
| 680 |
interrupt-parent = <&gpx1>; |
| 681 |
interrupts = <1 IRQ_TYPE_EDGE_FALLING>; |
| 682 |
wakeup-source; |
| 683 |
pinctrl-names = "default"; |
| 684 |
pinctrl-0 = <&trackpad_irq>; |
| 685 |
linux,gpio-keymap = <KEY_RESERVED |
| 686 |
KEY_RESERVED |
| 687 |
KEY_RESERVED /* GPIO0 */ |
| 688 |
KEY_RESERVED /* GPIO1 */ |
| 689 |
KEY_RESERVED /* GPIO2 */ |
| 690 |
BTN_LEFT>; /* GPIO3 */ |
| 691 |
}; |
| 692 |
}; |
| 693 |
|
| 694 |
&hsi2c_9 { |
| 695 |
status = "okay"; |
| 696 |
clock-frequency = <400000>; |
| 697 |
|
| 698 |
tpm@20 { |
| 699 |
compatible = "infineon,slb9645tt"; |
| 700 |
reg = <0x20>; |
| 701 |
|
| 702 |
/* Unused irq; but still need to configure the pins */ |
| 703 |
pinctrl-names = "default"; |
| 704 |
pinctrl-0 = <&tpm_irq>; |
| 705 |
}; |
| 706 |
}; |
| 707 |
|
| 708 |
&i2c_2 { |
| 709 |
status = "okay"; |
| 710 |
samsung,i2c-sda-delay = <100>; |
| 711 |
samsung,i2c-max-bus-freq = <66000>; |
| 712 |
samsung,i2c-slave-addr = <0x50>; |
| 713 |
}; |
| 714 |
|
| 715 |
&i2s0 { |
| 716 |
assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; |
| 717 |
assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; |
| 718 |
status = "okay"; |
| 719 |
}; |
| 720 |
|
| 721 |
&mixer { |
| 722 |
status = "okay"; |
| 723 |
}; |
| 724 |
|
| 725 |
/* eMMC flash */ |
| 726 |
&mmc_0 { |
| 727 |
status = "okay"; |
| 728 |
mmc-ddr-1_8v; |
| 729 |
mmc-hs200-1_8v; |
| 730 |
cap-mmc-highspeed; |
| 731 |
non-removable; |
| 732 |
clock-frequency = <400000000>; |
| 733 |
samsung,dw-mshc-ciu-div = <3>; |
| 734 |
samsung,dw-mshc-sdr-timing = <0 4>; |
| 735 |
samsung,dw-mshc-ddr-timing = <0 2>; |
| 736 |
samsung,dw-mshc-hs400-timing = <0 2>; |
| 737 |
samsung,read-strobe-delay = <90>; |
| 738 |
pinctrl-names = "default"; |
| 739 |
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>; |
| 740 |
bus-width = <8>; |
| 741 |
}; |
| 742 |
|
| 743 |
/* WiFi SDIO module */ |
| 744 |
&mmc_1 { |
| 745 |
status = "okay"; |
| 746 |
non-removable; |
| 747 |
cap-sdio-irq; |
| 748 |
keep-power-in-suspend; |
| 749 |
clock-frequency = <400000000>; |
| 750 |
samsung,dw-mshc-ciu-div = <1>; |
| 751 |
samsung,dw-mshc-sdr-timing = <0 1>; |
| 752 |
samsung,dw-mshc-ddr-timing = <0 2>; |
| 753 |
pinctrl-names = "default"; |
| 754 |
pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>, |
| 755 |
<&sd1_bus4>, <&sd1_bus8>, <&wifi_en>; |
| 756 |
bus-width = <4>; |
| 757 |
cap-sd-highspeed; |
| 758 |
mmc-pwrseq = <&mmc1_pwrseq>; |
| 759 |
vqmmc-supply = <&buck10_reg>; |
| 760 |
}; |
| 761 |
|
| 762 |
/* uSD card */ |
| 763 |
&mmc_2 { |
| 764 |
status = "okay"; |
| 765 |
cap-sd-highspeed; |
| 766 |
card-detect-delay = <200>; |
| 767 |
clock-frequency = <400000000>; |
| 768 |
samsung,dw-mshc-ciu-div = <3>; |
| 769 |
samsung,dw-mshc-sdr-timing = <2 3>; |
| 770 |
samsung,dw-mshc-ddr-timing = <1 2>; |
| 771 |
pinctrl-names = "default"; |
| 772 |
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; |
| 773 |
bus-width = <4>; |
| 774 |
}; |
| 775 |
|
| 776 |
|
| 777 |
&pinctrl_0 { |
| 778 |
pinctrl-names = "default"; |
| 779 |
pinctrl-0 = <&mask_tpm_reset>; |
| 780 |
|
| 781 |
wifi_en: wifi-en-pins { |
| 782 |
samsung,pins = "gpx0-0"; |
| 783 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 784 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 785 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 786 |
}; |
| 787 |
|
| 788 |
max98090_irq: max98090-irq-pins { |
| 789 |
samsung,pins = "gpx0-2"; |
| 790 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 791 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 792 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 793 |
}; |
| 794 |
|
| 795 |
/* We need GPX0_6 to be low at sleep time; just keep it low always */ |
| 796 |
mask_tpm_reset: mask-tpm-reset-pins { |
| 797 |
samsung,pins = "gpx0-6"; |
| 798 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 799 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 800 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 801 |
samsung,pin-val = <0>; |
| 802 |
}; |
| 803 |
|
| 804 |
tpm_irq: tpm-irq-pins { |
| 805 |
samsung,pins = "gpx1-0"; |
| 806 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 807 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 808 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 809 |
}; |
| 810 |
|
| 811 |
trackpad_irq: trackpad-irq-pins { |
| 812 |
samsung,pins = "gpx1-1"; |
| 813 |
samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
| 814 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 815 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 816 |
}; |
| 817 |
|
| 818 |
power_key_irq: power-key-irq-pins { |
| 819 |
samsung,pins = "gpx1-2"; |
| 820 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 821 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 822 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 823 |
}; |
| 824 |
|
| 825 |
ec_irq: ec-irq-pins { |
| 826 |
samsung,pins = "gpx1-5"; |
| 827 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 828 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 829 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 830 |
}; |
| 831 |
|
| 832 |
tps65090_irq: tps65090-irq-pins { |
| 833 |
samsung,pins = "gpx2-5"; |
| 834 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 835 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 836 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 837 |
}; |
| 838 |
|
| 839 |
dp_hpd_gpio: dp-hpd-gpio-pins { |
| 840 |
samsung,pins = "gpx2-6"; |
| 841 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 842 |
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| 843 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 844 |
}; |
| 845 |
|
| 846 |
max77802_irq: max77802-irq-pins { |
| 847 |
samsung,pins = "gpx3-1"; |
| 848 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 849 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 850 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 851 |
}; |
| 852 |
|
| 853 |
lid_irq: lid-irq-pins { |
| 854 |
samsung,pins = "gpx3-4"; |
| 855 |
samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
| 856 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 857 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 858 |
}; |
| 859 |
|
| 860 |
hdmi_hpd_irq: hdmi-hpd-irq-pins { |
| 861 |
samsung,pins = "gpx3-7"; |
| 862 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 863 |
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| 864 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 865 |
}; |
| 866 |
|
| 867 |
pmic_dvs_1: pmic-dvs-1-pins { |
| 868 |
samsung,pins = "gpy7-6"; |
| 869 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 870 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 871 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 872 |
}; |
| 873 |
}; |
| 874 |
|
| 875 |
/* pinctrl_1 */ |
| 876 |
/* Adjust WiFi drive strengths lower for EMI */ |
| 877 |
&sd1_bus1 { |
| 878 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| 879 |
}; |
| 880 |
|
| 881 |
&sd1_bus4 { |
| 882 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| 883 |
}; |
| 884 |
|
| 885 |
&sd1_bus8 { |
| 886 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| 887 |
}; |
| 888 |
|
| 889 |
&sd1_clk { |
| 890 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| 891 |
}; |
| 892 |
|
| 893 |
&sd1_cmd { |
| 894 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| 895 |
}; |
| 896 |
|
| 897 |
&pinctrl_2 { |
| 898 |
pmic_dvs_2: pmic-dvs-2-pins { |
| 899 |
samsung,pins = "gpj4-2", "gpj4-3"; |
| 900 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 901 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 902 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 903 |
}; |
| 904 |
}; |
| 905 |
|
| 906 |
/* pinctrl_3*/ |
| 907 |
/* Drive SPI lines at x2 for better integrity */ |
| 908 |
&spi2_bus { |
| 909 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| 910 |
}; |
| 911 |
|
| 912 |
&pinctrl_3 { |
| 913 |
/* Drive SPI chip select at x2 for better integrity */ |
| 914 |
ec_spi_cs: ec-spi-cs-pins { |
| 915 |
samsung,pins = "gpb1-2"; |
| 916 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 917 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 918 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>; |
| 919 |
}; |
| 920 |
|
| 921 |
usb300_vbus_en: usb300-vbus-en-pins { |
| 922 |
samsung,pins = "gph0-0"; |
| 923 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 924 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 925 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 926 |
}; |
| 927 |
|
| 928 |
usb301_vbus_en: usb301-vbus-en-pins { |
| 929 |
samsung,pins = "gph0-1"; |
| 930 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 931 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 932 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 933 |
}; |
| 934 |
|
| 935 |
pmic_selb: pmic-selb-pins { |
| 936 |
samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5", |
| 937 |
"gph0-6"; |
| 938 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 939 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 940 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 941 |
}; |
| 942 |
}; |
| 943 |
|
| 944 |
&pmu_system_controller { |
| 945 |
assigned-clocks = <&pmu_system_controller 0>; |
| 946 |
assigned-clock-parents = <&clock CLK_FIN_PLL>; |
| 947 |
}; |
| 948 |
|
| 949 |
&rtc { |
| 950 |
status = "okay"; |
| 951 |
clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; |
| 952 |
clock-names = "rtc", "rtc_src"; |
| 953 |
}; |
| 954 |
|
| 955 |
&spi_2 { |
| 956 |
status = "okay"; |
| 957 |
num-cs = <1>; |
| 958 |
samsung,spi-src-clk = <0>; |
| 959 |
cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>; |
| 960 |
|
| 961 |
cros_ec: cros-ec@0 { |
| 962 |
compatible = "google,cros-ec-spi"; |
| 963 |
interrupt-parent = <&gpx1>; |
| 964 |
interrupts = <5 IRQ_TYPE_NONE>; |
| 965 |
pinctrl-names = "default"; |
| 966 |
pinctrl-0 = <&ec_spi_cs &ec_irq>; |
| 967 |
reg = <0>; |
| 968 |
spi-max-frequency = <3125000>; |
| 969 |
google,has-vbc-nvram; |
| 970 |
wakeup-source; |
| 971 |
|
| 972 |
controller-data { |
| 973 |
samsung,spi-feedback-delay = <1>; |
| 974 |
}; |
| 975 |
|
| 976 |
i2c_tunnel: i2c-tunnel { |
| 977 |
compatible = "google,cros-ec-i2c-tunnel"; |
| 978 |
#address-cells = <1>; |
| 979 |
#size-cells = <0>; |
| 980 |
google,remote-bus = <0>; |
| 981 |
|
| 982 |
battery: sbs-battery@b { |
| 983 |
compatible = "sbs,sbs-battery"; |
| 984 |
reg = <0xb>; |
| 985 |
sbs,poll-retry-count = <1>; |
| 986 |
sbs,i2c-retry-count = <2>; |
| 987 |
}; |
| 988 |
|
| 989 |
power-regulator@48 { |
| 990 |
compatible = "ti,tps65090"; |
| 991 |
reg = <0x48>; |
| 992 |
|
| 993 |
/* |
| 994 |
* Config irq to disable internal pulls |
| 995 |
* even though we run in polling mode. |
| 996 |
*/ |
| 997 |
pinctrl-names = "default"; |
| 998 |
pinctrl-0 = <&tps65090_irq>; |
| 999 |
|
| 1000 |
vsys1-supply = <&vbat>; |
| 1001 |
vsys2-supply = <&vbat>; |
| 1002 |
vsys3-supply = <&vbat>; |
| 1003 |
infet1-supply = <&vbat>; |
| 1004 |
infet2-supply = <&tps65090_dcdc1>; |
| 1005 |
infet3-supply = <&tps65090_dcdc2>; |
| 1006 |
infet4-supply = <&tps65090_dcdc2>; |
| 1007 |
infet5-supply = <&tps65090_dcdc2>; |
| 1008 |
infet6-supply = <&tps65090_dcdc2>; |
| 1009 |
infet7-supply = <&tps65090_dcdc1>; |
| 1010 |
vsys-l1-supply = <&vbat>; |
| 1011 |
vsys-l2-supply = <&vbat>; |
| 1012 |
|
| 1013 |
regulators { |
| 1014 |
tps65090_dcdc1: dcdc1 { |
| 1015 |
ti,enable-ext-control; |
| 1016 |
}; |
| 1017 |
tps65090_dcdc2: dcdc2 { |
| 1018 |
ti,enable-ext-control; |
| 1019 |
}; |
| 1020 |
tps65090_dcdc3: dcdc3 { |
| 1021 |
ti,enable-ext-control; |
| 1022 |
}; |
| 1023 |
tps65090_fet1: fet1 { |
| 1024 |
regulator-name = "vcd_led"; |
| 1025 |
}; |
| 1026 |
tps65090_fet2: fet2 { |
| 1027 |
regulator-name = "video_mid"; |
| 1028 |
regulator-always-on; |
| 1029 |
}; |
| 1030 |
tps65090_fet3: fet3 { |
| 1031 |
regulator-name = "wwan_r"; |
| 1032 |
regulator-always-on; |
| 1033 |
}; |
| 1034 |
tps65090_fet4: fet4 { |
| 1035 |
regulator-name = "sdcard"; |
| 1036 |
regulator-always-on; |
| 1037 |
}; |
| 1038 |
tps65090_fet5: fet5 { |
| 1039 |
regulator-name = "camout"; |
| 1040 |
regulator-always-on; |
| 1041 |
}; |
| 1042 |
tps65090_fet6: fet6 { |
| 1043 |
regulator-name = "lcd_vdd"; |
| 1044 |
}; |
| 1045 |
tps65090_fet7: fet7 { |
| 1046 |
regulator-name = "video_mid_1a"; |
| 1047 |
regulator-always-on; |
| 1048 |
}; |
| 1049 |
tps65090_ldo1: ldo1 { |
| 1050 |
}; |
| 1051 |
tps65090_ldo2: ldo2 { |
| 1052 |
}; |
| 1053 |
}; |
| 1054 |
|
| 1055 |
charger { |
| 1056 |
compatible = "ti,tps65090-charger"; |
| 1057 |
}; |
| 1058 |
}; |
| 1059 |
}; |
| 1060 |
}; |
| 1061 |
}; |
| 1062 |
|
| 1063 |
&serial_3 { |
| 1064 |
status = "okay"; |
| 1065 |
}; |
| 1066 |
|
| 1067 |
&timer { |
| 1068 |
arm,cpu-registers-not-fw-configured; |
| 1069 |
}; |
| 1070 |
|
| 1071 |
&tmu_cpu0 { |
| 1072 |
vtmu-supply = <&ldo10_reg>; |
| 1073 |
}; |
| 1074 |
|
| 1075 |
&tmu_cpu1 { |
| 1076 |
vtmu-supply = <&ldo10_reg>; |
| 1077 |
}; |
| 1078 |
|
| 1079 |
&tmu_cpu2 { |
| 1080 |
vtmu-supply = <&ldo10_reg>; |
| 1081 |
}; |
| 1082 |
|
| 1083 |
&tmu_cpu3 { |
| 1084 |
vtmu-supply = <&ldo10_reg>; |
| 1085 |
}; |
| 1086 |
|
| 1087 |
&tmu_gpu { |
| 1088 |
vtmu-supply = <&ldo10_reg>; |
| 1089 |
}; |
| 1090 |
|
| 1091 |
&usbdrd3_0 { |
| 1092 |
vdd10-supply = <&ldo15_reg>; |
| 1093 |
vdd33-supply = <&ldo12_reg>; |
| 1094 |
}; |
| 1095 |
|
| 1096 |
&usbdrd3_1 { |
| 1097 |
vdd10-supply = <&ldo15_reg>; |
| 1098 |
vdd33-supply = <&ldo12_reg>; |
| 1099 |
}; |
| 1100 |
|
| 1101 |
&usbdrd_dwc3_0 { |
| 1102 |
dr_mode = "host"; |
| 1103 |
}; |
| 1104 |
|
| 1105 |
&usbdrd_dwc3_1 { |
| 1106 |
dr_mode = "host"; |
| 1107 |
}; |
| 1108 |
|
| 1109 |
&usbdrd_phy0 { |
| 1110 |
vbus-supply = <&usb300_vbus_reg>; |
| 1111 |
}; |
| 1112 |
|
| 1113 |
&usbdrd_phy1 { |
| 1114 |
vbus-supply = <&usb301_vbus_reg>; |
| 1115 |
}; |
| 1116 |
|
| 1117 |
/* |
| 1118 |
* Use longest HW watchdog in SoC (32 seconds) since the hardware |
| 1119 |
* watchdog provides no debugging information (compared to soft/hard |
| 1120 |
* lockup detectors) and so should be last resort. |
| 1121 |
*/ |
| 1122 |
&watchdog { |
| 1123 |
timeout-sec = <32>; |
| 1124 |
}; |
| 1125 |
|
| 1126 |
#include "../cros-ec-keyboard.dtsi" |
| 1127 |
#include "../cros-adc-thermistors.dtsi" |