| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung's Exynos5420 based Arndale Octa board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
#include "exynos5420.dtsi" |
| 11 |
#include "exynos5420-cpus.dtsi" |
| 12 |
#include <dt-bindings/gpio/gpio.h> |
| 13 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 14 |
#include <dt-bindings/input/input.h> |
| 15 |
#include <dt-bindings/clock/samsung,s2mps11.h> |
| 16 |
|
| 17 |
/ { |
| 18 |
model = "Insignal Arndale Octa evaluation board based on Exynos5420"; |
| 19 |
compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5"; |
| 20 |
|
| 21 |
memory@20000000 { |
| 22 |
device_type = "memory"; |
| 23 |
reg = <0x20000000 0x80000000>; |
| 24 |
}; |
| 25 |
|
| 26 |
aliases { |
| 27 |
mmc0 = &mmc_0; |
| 28 |
mmc1 = &mmc_2; |
| 29 |
}; |
| 30 |
|
| 31 |
chosen { |
| 32 |
stdout-path = "serial3:115200n8"; |
| 33 |
}; |
| 34 |
|
| 35 |
firmware@2073000 { |
| 36 |
compatible = "samsung,secure-firmware"; |
| 37 |
reg = <0x02073000 0x1000>; |
| 38 |
}; |
| 39 |
|
| 40 |
fixed-rate-clocks { |
| 41 |
oscclk { |
| 42 |
compatible = "samsung,exynos5420-oscclk"; |
| 43 |
clock-frequency = <24000000>; |
| 44 |
}; |
| 45 |
}; |
| 46 |
|
| 47 |
gpio-keys { |
| 48 |
compatible = "gpio-keys"; |
| 49 |
|
| 50 |
key-wakeup { |
| 51 |
label = "SW-TACT1"; |
| 52 |
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
| 53 |
linux,code = <KEY_WAKEUP>; |
| 54 |
wakeup-source; |
| 55 |
}; |
| 56 |
}; |
| 57 |
}; |
| 58 |
|
| 59 |
&adc { |
| 60 |
vdd-supply = <&ldo4_reg>; |
| 61 |
status = "okay"; |
| 62 |
}; |
| 63 |
|
| 64 |
&cci { |
| 65 |
status = "disabled"; |
| 66 |
}; |
| 67 |
|
| 68 |
&cpu0 { |
| 69 |
cpu-supply = <&buck2_reg>; |
| 70 |
}; |
| 71 |
|
| 72 |
&cpu4 { |
| 73 |
cpu-supply = <&buck6_reg>; |
| 74 |
}; |
| 75 |
|
| 76 |
&cpu0_thermal { |
| 77 |
trips { |
| 78 |
cpu0_alert0: cpu-alert-0 { |
| 79 |
temperature = <60000>; /* millicelsius */ |
| 80 |
hysteresis = <5000>; /* millicelsius */ |
| 81 |
type = "passive"; |
| 82 |
}; |
| 83 |
cpu0_alert1: cpu-alert-1 { |
| 84 |
temperature = <80000>; /* millicelsius */ |
| 85 |
hysteresis = <10000>; /* millicelsius */ |
| 86 |
type = "passive"; |
| 87 |
}; |
| 88 |
cpu0_alert2: cpu-alert-2 { |
| 89 |
temperature = <110000>; /* millicelsius */ |
| 90 |
hysteresis = <10000>; /* millicelsius */ |
| 91 |
type = "passive"; |
| 92 |
}; |
| 93 |
cpu0_crit0: cpu-crit-0 { |
| 94 |
temperature = <120000>; /* millicelsius */ |
| 95 |
hysteresis = <0>; /* millicelsius */ |
| 96 |
type = "critical"; |
| 97 |
}; |
| 98 |
}; |
| 99 |
|
| 100 |
cooling-maps { |
| 101 |
/* |
| 102 |
* Reduce the CPU speed by 2 steps, down to: 1600 MHz |
| 103 |
* and 1100 MHz. |
| 104 |
*/ |
| 105 |
map0 { |
| 106 |
trip = <&cpu0_alert0>; |
| 107 |
cooling-device = <&cpu0 0 2>, |
| 108 |
<&cpu1 0 2>, |
| 109 |
<&cpu2 0 2>, |
| 110 |
<&cpu3 0 2>, |
| 111 |
<&cpu4 0 2>, |
| 112 |
<&cpu5 0 2>, |
| 113 |
<&cpu6 0 2>, |
| 114 |
<&cpu7 0 2>; |
| 115 |
}; |
| 116 |
|
| 117 |
/* |
| 118 |
* Reduce the CPU speed down to 1200 MHz big (6 steps) |
| 119 |
* and 800 MHz LITTLE (5 steps). |
| 120 |
*/ |
| 121 |
map1 { |
| 122 |
trip = <&cpu0_alert1>; |
| 123 |
cooling-device = <&cpu0 3 6>, |
| 124 |
<&cpu1 3 6>, |
| 125 |
<&cpu2 3 6>, |
| 126 |
<&cpu3 3 6>, |
| 127 |
<&cpu4 3 5>, |
| 128 |
<&cpu5 3 5>, |
| 129 |
<&cpu6 3 5>, |
| 130 |
<&cpu7 3 5>; |
| 131 |
}; |
| 132 |
|
| 133 |
/* |
| 134 |
* Reduce the CPU speed as much as possible, down to 700 MHz |
| 135 |
* big (11 steps) and 600 MHz LITTLE (7 steps). |
| 136 |
*/ |
| 137 |
map2 { |
| 138 |
trip = <&cpu0_alert2>; |
| 139 |
cooling-device = <&cpu0 6 11>, |
| 140 |
<&cpu1 6 11>, |
| 141 |
<&cpu2 6 11>, |
| 142 |
<&cpu3 6 11>, |
| 143 |
<&cpu4 5 7>, |
| 144 |
<&cpu5 5 7>, |
| 145 |
<&cpu6 5 7>, |
| 146 |
<&cpu7 5 7>; |
| 147 |
}; |
| 148 |
}; |
| 149 |
}; |
| 150 |
|
| 151 |
&cpu1_thermal { |
| 152 |
trips { |
| 153 |
cpu1_alert0: cpu-alert-0 { |
| 154 |
temperature = <60000>; /* millicelsius */ |
| 155 |
hysteresis = <5000>; /* millicelsius */ |
| 156 |
type = "passive"; |
| 157 |
}; |
| 158 |
cpu1_alert1: cpu-alert-1 { |
| 159 |
temperature = <80000>; /* millicelsius */ |
| 160 |
hysteresis = <10000>; /* millicelsius */ |
| 161 |
type = "passive"; |
| 162 |
}; |
| 163 |
cpu1_alert2: cpu-alert-2 { |
| 164 |
temperature = <110000>; /* millicelsius */ |
| 165 |
hysteresis = <10000>; /* millicelsius */ |
| 166 |
type = "passive"; |
| 167 |
}; |
| 168 |
cpu1_crit0: cpu-crit-0 { |
| 169 |
temperature = <120000>; /* millicelsius */ |
| 170 |
hysteresis = <0>; /* millicelsius */ |
| 171 |
type = "critical"; |
| 172 |
}; |
| 173 |
}; |
| 174 |
|
| 175 |
cooling-maps { |
| 176 |
map0 { |
| 177 |
trip = <&cpu1_alert0>; |
| 178 |
cooling-device = <&cpu0 0 2>, |
| 179 |
<&cpu1 0 2>, |
| 180 |
<&cpu2 0 2>, |
| 181 |
<&cpu3 0 2>, |
| 182 |
<&cpu4 0 2>, |
| 183 |
<&cpu5 0 2>, |
| 184 |
<&cpu6 0 2>, |
| 185 |
<&cpu7 0 2>; |
| 186 |
}; |
| 187 |
|
| 188 |
map1 { |
| 189 |
trip = <&cpu1_alert1>; |
| 190 |
cooling-device = <&cpu0 3 6>, |
| 191 |
<&cpu1 3 6>, |
| 192 |
<&cpu2 3 6>, |
| 193 |
<&cpu3 3 6>, |
| 194 |
<&cpu4 3 5>, |
| 195 |
<&cpu5 3 5>, |
| 196 |
<&cpu6 3 5>, |
| 197 |
<&cpu7 3 5>; |
| 198 |
}; |
| 199 |
|
| 200 |
map2 { |
| 201 |
trip = <&cpu1_alert2>; |
| 202 |
cooling-device = <&cpu0 6 11>, |
| 203 |
<&cpu1 6 11>, |
| 204 |
<&cpu2 6 11>, |
| 205 |
<&cpu3 6 11>, |
| 206 |
<&cpu4 5 7>, |
| 207 |
<&cpu5 5 7>, |
| 208 |
<&cpu6 5 7>, |
| 209 |
<&cpu7 5 7>; |
| 210 |
}; |
| 211 |
}; |
| 212 |
}; |
| 213 |
|
| 214 |
&cpu2_thermal { |
| 215 |
trips { |
| 216 |
cpu2_alert0: cpu-alert-0 { |
| 217 |
temperature = <60000>; /* millicelsius */ |
| 218 |
hysteresis = <5000>; /* millicelsius */ |
| 219 |
type = "passive"; |
| 220 |
}; |
| 221 |
cpu2_alert1: cpu-alert-1 { |
| 222 |
temperature = <80000>; /* millicelsius */ |
| 223 |
hysteresis = <10000>; /* millicelsius */ |
| 224 |
type = "passive"; |
| 225 |
}; |
| 226 |
cpu2_alert2: cpu-alert-2 { |
| 227 |
temperature = <110000>; /* millicelsius */ |
| 228 |
hysteresis = <10000>; /* millicelsius */ |
| 229 |
type = "passive"; |
| 230 |
}; |
| 231 |
cpu2_crit0: cpu-crit-0 { |
| 232 |
temperature = <120000>; /* millicelsius */ |
| 233 |
hysteresis = <0>; /* millicelsius */ |
| 234 |
type = "critical"; |
| 235 |
}; |
| 236 |
}; |
| 237 |
|
| 238 |
cooling-maps { |
| 239 |
map0 { |
| 240 |
trip = <&cpu2_alert0>; |
| 241 |
cooling-device = <&cpu0 0 2>, |
| 242 |
<&cpu1 0 2>, |
| 243 |
<&cpu2 0 2>, |
| 244 |
<&cpu3 0 2>, |
| 245 |
<&cpu4 0 2>, |
| 246 |
<&cpu5 0 2>, |
| 247 |
<&cpu6 0 2>, |
| 248 |
<&cpu7 0 2>; |
| 249 |
}; |
| 250 |
|
| 251 |
map1 { |
| 252 |
trip = <&cpu2_alert1>; |
| 253 |
cooling-device = <&cpu0 3 6>, |
| 254 |
<&cpu1 3 6>, |
| 255 |
<&cpu2 3 6>, |
| 256 |
<&cpu3 3 6>, |
| 257 |
<&cpu4 3 5>, |
| 258 |
<&cpu5 3 5>, |
| 259 |
<&cpu6 3 5>, |
| 260 |
<&cpu7 3 5>; |
| 261 |
}; |
| 262 |
|
| 263 |
map2 { |
| 264 |
trip = <&cpu2_alert2>; |
| 265 |
cooling-device = <&cpu0 6 11>, |
| 266 |
<&cpu1 6 11>, |
| 267 |
<&cpu2 6 11>, |
| 268 |
<&cpu3 6 11>, |
| 269 |
<&cpu4 6 7>, |
| 270 |
<&cpu5 6 7>, |
| 271 |
<&cpu6 6 7>, |
| 272 |
<&cpu7 6 7>; |
| 273 |
}; |
| 274 |
}; |
| 275 |
}; |
| 276 |
|
| 277 |
&cpu3_thermal { |
| 278 |
trips { |
| 279 |
cpu3_alert0: cpu-alert-0 { |
| 280 |
temperature = <60000>; /* millicelsius */ |
| 281 |
hysteresis = <5000>; /* millicelsius */ |
| 282 |
type = "passive"; |
| 283 |
}; |
| 284 |
cpu3_alert1: cpu-alert-1 { |
| 285 |
temperature = <80000>; /* millicelsius */ |
| 286 |
hysteresis = <10000>; /* millicelsius */ |
| 287 |
type = "passive"; |
| 288 |
}; |
| 289 |
cpu3_alert2: cpu-alert-2 { |
| 290 |
temperature = <110000>; /* millicelsius */ |
| 291 |
hysteresis = <10000>; /* millicelsius */ |
| 292 |
type = "passive"; |
| 293 |
}; |
| 294 |
cpu3_crit0: cpu-crit-0 { |
| 295 |
temperature = <120000>; /* millicelsius */ |
| 296 |
hysteresis = <0>; /* millicelsius */ |
| 297 |
type = "critical"; |
| 298 |
}; |
| 299 |
}; |
| 300 |
|
| 301 |
cooling-maps { |
| 302 |
map0 { |
| 303 |
trip = <&cpu3_alert0>; |
| 304 |
cooling-device = <&cpu0 0 2>, |
| 305 |
<&cpu1 0 2>, |
| 306 |
<&cpu2 0 2>, |
| 307 |
<&cpu3 0 2>, |
| 308 |
<&cpu4 0 2>, |
| 309 |
<&cpu5 0 2>, |
| 310 |
<&cpu6 0 2>, |
| 311 |
<&cpu7 0 2>; |
| 312 |
}; |
| 313 |
|
| 314 |
map1 { |
| 315 |
trip = <&cpu3_alert1>; |
| 316 |
cooling-device = <&cpu0 3 6>, |
| 317 |
<&cpu1 3 6>, |
| 318 |
<&cpu2 3 6>, |
| 319 |
<&cpu3 3 6>, |
| 320 |
<&cpu4 3 5>, |
| 321 |
<&cpu5 3 5>, |
| 322 |
<&cpu6 3 5>, |
| 323 |
<&cpu7 3 5>; |
| 324 |
}; |
| 325 |
|
| 326 |
map2 { |
| 327 |
trip = <&cpu3_alert2>; |
| 328 |
cooling-device = <&cpu0 6 11>, |
| 329 |
<&cpu1 6 11>, |
| 330 |
<&cpu2 6 11>, |
| 331 |
<&cpu3 6 11>, |
| 332 |
<&cpu4 5 7>, |
| 333 |
<&cpu5 5 7>, |
| 334 |
<&cpu6 5 7>, |
| 335 |
<&cpu7 5 7>; |
| 336 |
}; |
| 337 |
}; |
| 338 |
}; |
| 339 |
|
| 340 |
&hdmi { |
| 341 |
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
| 342 |
vdd_osc-supply = <&ldo7_reg>; |
| 343 |
vdd_pll-supply = <&ldo6_reg>; |
| 344 |
vdd-supply = <&ldo6_reg>; |
| 345 |
ddc = <&i2c_2>; |
| 346 |
status = "okay"; |
| 347 |
}; |
| 348 |
|
| 349 |
&hsi2c_4 { |
| 350 |
status = "okay"; |
| 351 |
|
| 352 |
pmic@66 { |
| 353 |
compatible = "samsung,s2mps11-pmic"; |
| 354 |
reg = <0x66>; |
| 355 |
|
| 356 |
interrupt-parent = <&gpx3>; |
| 357 |
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
| 358 |
pinctrl-names = "default"; |
| 359 |
pinctrl-0 = <&s2mps11_irq>; |
| 360 |
wakeup-source; |
| 361 |
|
| 362 |
s2mps11_osc: clocks { |
| 363 |
compatible = "samsung,s2mps11-clk"; |
| 364 |
#clock-cells = <1>; |
| 365 |
clock-output-names = "s2mps11_ap", |
| 366 |
"s2mps11_cp", "s2mps11_bt"; |
| 367 |
}; |
| 368 |
|
| 369 |
regulators { |
| 370 |
ldo1_reg: LDO1 { |
| 371 |
regulator-name = "PVDD_ALIVE_1V0"; |
| 372 |
regulator-min-microvolt = <1000000>; |
| 373 |
regulator-max-microvolt = <1000000>; |
| 374 |
regulator-always-on; |
| 375 |
}; |
| 376 |
|
| 377 |
ldo2_reg: LDO2 { |
| 378 |
regulator-name = "PVDD_APIO_1V8"; |
| 379 |
regulator-min-microvolt = <1800000>; |
| 380 |
regulator-max-microvolt = <1800000>; |
| 381 |
regulator-always-on; |
| 382 |
}; |
| 383 |
|
| 384 |
ldo3_reg: LDO3 { |
| 385 |
regulator-name = "PVDD_APIO_MMCON_1V8"; |
| 386 |
regulator-min-microvolt = <1800000>; |
| 387 |
regulator-max-microvolt = <1800000>; |
| 388 |
/* |
| 389 |
* Must be always on, even though there is |
| 390 |
* a consumer (mmc_0). Otherwise the board |
| 391 |
* does not reboot with vendor U-Boot |
| 392 |
* (Linaro for Arndale Octa, v2012.07). |
| 393 |
*/ |
| 394 |
regulator-always-on; |
| 395 |
|
| 396 |
regulator-state-mem { |
| 397 |
regulator-off-in-suspend; |
| 398 |
}; |
| 399 |
}; |
| 400 |
|
| 401 |
ldo4_reg: LDO4 { |
| 402 |
regulator-name = "PVDD_ADC_1V8"; |
| 403 |
regulator-min-microvolt = <1800000>; |
| 404 |
regulator-max-microvolt = <1800000>; |
| 405 |
}; |
| 406 |
|
| 407 |
ldo5_reg: LDO5 { |
| 408 |
regulator-name = "PVDD_PLL_1V8"; |
| 409 |
regulator-min-microvolt = <1800000>; |
| 410 |
regulator-max-microvolt = <1800000>; |
| 411 |
regulator-always-on; |
| 412 |
}; |
| 413 |
|
| 414 |
ldo6_reg: LDO6 { |
| 415 |
regulator-name = "PVDD_ANAIP_1V0"; |
| 416 |
regulator-min-microvolt = <1000000>; |
| 417 |
regulator-max-microvolt = <1000000>; |
| 418 |
}; |
| 419 |
|
| 420 |
ldo7_reg: LDO7 { |
| 421 |
regulator-name = "PVDD_ANAIP_1V8"; |
| 422 |
regulator-min-microvolt = <1800000>; |
| 423 |
regulator-max-microvolt = <1800000>; |
| 424 |
|
| 425 |
regulator-state-mem { |
| 426 |
regulator-off-in-suspend; |
| 427 |
}; |
| 428 |
}; |
| 429 |
|
| 430 |
ldo8_reg: LDO8 { |
| 431 |
regulator-name = "PVDD_ABB_1V8"; |
| 432 |
regulator-min-microvolt = <1800000>; |
| 433 |
regulator-max-microvolt = <1800000>; |
| 434 |
regulator-always-on; |
| 435 |
}; |
| 436 |
|
| 437 |
ldo9_reg: LDO9 { |
| 438 |
regulator-name = "PVDD_USB_3V3"; |
| 439 |
regulator-min-microvolt = <3000000>; |
| 440 |
regulator-max-microvolt = <3000000>; |
| 441 |
regulator-always-on; |
| 442 |
}; |
| 443 |
|
| 444 |
ldo10_reg: LDO10 { |
| 445 |
regulator-name = "PVDD_PRE_1V8"; |
| 446 |
regulator-min-microvolt = <1800000>; |
| 447 |
regulator-max-microvolt = <1800000>; |
| 448 |
regulator-always-on; |
| 449 |
}; |
| 450 |
|
| 451 |
ldo11_reg: LDO11 { |
| 452 |
regulator-name = "PVDD_USB_1V0"; |
| 453 |
regulator-min-microvolt = <1000000>; |
| 454 |
regulator-max-microvolt = <1000000>; |
| 455 |
regulator-always-on; |
| 456 |
}; |
| 457 |
|
| 458 |
ldo12_reg: LDO12 { |
| 459 |
regulator-name = "PVDD_HSIC_1V8"; |
| 460 |
regulator-min-microvolt = <1800000>; |
| 461 |
regulator-max-microvolt = <1800000>; |
| 462 |
}; |
| 463 |
|
| 464 |
ldo13_reg: LDO13 { |
| 465 |
regulator-name = "PVDD_APIO_MMCOFF_2V8"; |
| 466 |
regulator-min-microvolt = <1800000>; |
| 467 |
regulator-max-microvolt = <2800000>; |
| 468 |
|
| 469 |
regulator-state-mem { |
| 470 |
regulator-off-in-suspend; |
| 471 |
}; |
| 472 |
}; |
| 473 |
|
| 474 |
ldo14_reg: LDO14 { |
| 475 |
/* Unused */ |
| 476 |
regulator-name = "PVDD_LDO14"; |
| 477 |
regulator-min-microvolt = <800000>; |
| 478 |
regulator-max-microvolt = <3950000>; |
| 479 |
}; |
| 480 |
|
| 481 |
ldo15_reg: LDO15 { |
| 482 |
regulator-name = "PVDD_PERI_2V8"; |
| 483 |
regulator-min-microvolt = <3300000>; |
| 484 |
regulator-max-microvolt = <3300000>; |
| 485 |
|
| 486 |
regulator-state-mem { |
| 487 |
regulator-on-in-suspend; |
| 488 |
}; |
| 489 |
}; |
| 490 |
|
| 491 |
ldo16_reg: LDO16 { |
| 492 |
regulator-name = "PVDD_PERI_3V3"; |
| 493 |
regulator-min-microvolt = <2200000>; |
| 494 |
regulator-max-microvolt = <2200000>; |
| 495 |
|
| 496 |
regulator-state-mem { |
| 497 |
regulator-on-in-suspend; |
| 498 |
}; |
| 499 |
}; |
| 500 |
|
| 501 |
ldo17_reg: LDO17 { |
| 502 |
/* Unused */ |
| 503 |
regulator-name = "PVDD_LDO17"; |
| 504 |
regulator-min-microvolt = <800000>; |
| 505 |
regulator-max-microvolt = <3950000>; |
| 506 |
}; |
| 507 |
|
| 508 |
ldo18_reg: LDO18 { |
| 509 |
regulator-name = "PVDD_EMMC_1V8"; |
| 510 |
regulator-min-microvolt = <1800000>; |
| 511 |
regulator-max-microvolt = <1800000>; |
| 512 |
/* |
| 513 |
* Must stay in "off" mode during shutdown for |
| 514 |
* proper eMMC reset. The "off" mode is in |
| 515 |
* fact controlled by LDO18EN. The eMMC does |
| 516 |
* not have reset pin connected so the reset |
| 517 |
* will be triggered by falling edge of |
| 518 |
* LDO18EN. |
| 519 |
*/ |
| 520 |
|
| 521 |
regulator-state-mem { |
| 522 |
regulator-off-in-suspend; |
| 523 |
}; |
| 524 |
}; |
| 525 |
|
| 526 |
ldo19_reg: LDO19 { |
| 527 |
regulator-name = "PVDD_TFLASH_2V8"; |
| 528 |
regulator-min-microvolt = <2800000>; |
| 529 |
regulator-max-microvolt = <2800000>; |
| 530 |
|
| 531 |
regulator-state-mem { |
| 532 |
regulator-off-in-suspend; |
| 533 |
}; |
| 534 |
}; |
| 535 |
|
| 536 |
ldo20_reg: LDO20 { |
| 537 |
regulator-name = "PVDD_BTWIFI_1V8"; |
| 538 |
regulator-min-microvolt = <1800000>; |
| 539 |
regulator-max-microvolt = <1800000>; |
| 540 |
}; |
| 541 |
|
| 542 |
ldo21_reg: LDO21 { |
| 543 |
regulator-name = "PVDD_CAM1IO_1V8"; |
| 544 |
regulator-min-microvolt = <1800000>; |
| 545 |
regulator-max-microvolt = <1800000>; |
| 546 |
}; |
| 547 |
|
| 548 |
ldo22_reg: LDO22 { |
| 549 |
/* Unused */ |
| 550 |
regulator-name = "PVDD_LDO22"; |
| 551 |
regulator-min-microvolt = <800000>; |
| 552 |
regulator-max-microvolt = <2375000>; |
| 553 |
}; |
| 554 |
|
| 555 |
ldo23_reg: LDO23 { |
| 556 |
regulator-name = "PVDD_MIFS_1V1"; |
| 557 |
regulator-min-microvolt = <800000>; |
| 558 |
regulator-max-microvolt = <1100000>; |
| 559 |
regulator-always-on; |
| 560 |
|
| 561 |
regulator-state-mem { |
| 562 |
regulator-on-in-suspend; |
| 563 |
}; |
| 564 |
}; |
| 565 |
|
| 566 |
ldo24_reg: LDO24 { |
| 567 |
regulator-name = "PVDD_CAM1_AVDD_2V8"; |
| 568 |
regulator-min-microvolt = <2800000>; |
| 569 |
regulator-max-microvolt = <2800000>; |
| 570 |
|
| 571 |
regulator-state-mem { |
| 572 |
regulator-on-in-suspend; |
| 573 |
}; |
| 574 |
}; |
| 575 |
|
| 576 |
ldo25_reg: LDO25 { |
| 577 |
/* Unused */ |
| 578 |
regulator-name = "PVDD_LDO25"; |
| 579 |
regulator-min-microvolt = <800000>; |
| 580 |
regulator-max-microvolt = <3950000>; |
| 581 |
}; |
| 582 |
|
| 583 |
ldo26_reg: LDO26 { |
| 584 |
regulator-name = "PVDD_CAM0_AF_2V8"; |
| 585 |
regulator-min-microvolt = <3000000>; |
| 586 |
regulator-max-microvolt = <3000000>; |
| 587 |
}; |
| 588 |
|
| 589 |
ldo27_reg: LDO27 { |
| 590 |
regulator-name = "PVDD_G3DS_1V0"; |
| 591 |
regulator-min-microvolt = <800000>; |
| 592 |
regulator-max-microvolt = <1100000>; |
| 593 |
regulator-always-on; |
| 594 |
|
| 595 |
regulator-state-mem { |
| 596 |
regulator-on-in-suspend; |
| 597 |
}; |
| 598 |
}; |
| 599 |
|
| 600 |
ldo28_reg: LDO28 { |
| 601 |
regulator-name = "PVDD_TSP_3V3"; |
| 602 |
regulator-min-microvolt = <3300000>; |
| 603 |
regulator-max-microvolt = <3300000>; |
| 604 |
}; |
| 605 |
|
| 606 |
ldo29_reg: LDO29 { |
| 607 |
regulator-name = "PVDD_AUDIO_1V8"; |
| 608 |
regulator-min-microvolt = <1800000>; |
| 609 |
regulator-max-microvolt = <1800000>; |
| 610 |
}; |
| 611 |
|
| 612 |
ldo30_reg: LDO30 { |
| 613 |
/* Unused */ |
| 614 |
regulator-name = "PVDD_LDO30"; |
| 615 |
regulator-min-microvolt = <800000>; |
| 616 |
regulator-max-microvolt = <3950000>; |
| 617 |
}; |
| 618 |
|
| 619 |
ldo31_reg: LDO31 { |
| 620 |
regulator-name = "PVDD_PERI_1V8"; |
| 621 |
regulator-min-microvolt = <1800000>; |
| 622 |
regulator-max-microvolt = <1800000>; |
| 623 |
}; |
| 624 |
|
| 625 |
ldo32_reg: LDO32 { |
| 626 |
regulator-name = "PVDD_LCD_1V8"; |
| 627 |
regulator-min-microvolt = <1800000>; |
| 628 |
regulator-max-microvolt = <1800000>; |
| 629 |
}; |
| 630 |
|
| 631 |
ldo33_reg: LDO33 { |
| 632 |
regulator-name = "PVDD_CAM0IO_1V8"; |
| 633 |
regulator-min-microvolt = <1800000>; |
| 634 |
regulator-max-microvolt = <1800000>; |
| 635 |
}; |
| 636 |
|
| 637 |
ldo34_reg: LDO34 { |
| 638 |
/* Unused */ |
| 639 |
regulator-name = "PVDD_LDO34"; |
| 640 |
regulator-min-microvolt = <800000>; |
| 641 |
regulator-max-microvolt = <3950000>; |
| 642 |
}; |
| 643 |
|
| 644 |
ldo35_reg: LDO35 { |
| 645 |
regulator-name = "PVDD_CAM0_DVDD_1V2"; |
| 646 |
regulator-min-microvolt = <1200000>; |
| 647 |
regulator-max-microvolt = <1200000>; |
| 648 |
}; |
| 649 |
|
| 650 |
ldo36_reg: LDO36 { |
| 651 |
/* Unused */ |
| 652 |
regulator-name = "PVDD_LDO36"; |
| 653 |
regulator-min-microvolt = <800000>; |
| 654 |
regulator-max-microvolt = <3950000>; |
| 655 |
}; |
| 656 |
|
| 657 |
ldo37_reg: LDO37 { |
| 658 |
/* Unused */ |
| 659 |
regulator-name = "PVDD_LDO37"; |
| 660 |
regulator-min-microvolt = <800000>; |
| 661 |
regulator-max-microvolt = <3950000>; |
| 662 |
}; |
| 663 |
|
| 664 |
ldo38_reg: LDO38 { |
| 665 |
regulator-name = "PVDD_CAM0_AVDD_2V8"; |
| 666 |
regulator-min-microvolt = <2800000>; |
| 667 |
regulator-max-microvolt = <2800000>; |
| 668 |
}; |
| 669 |
|
| 670 |
buck1_reg: BUCK1 { |
| 671 |
regulator-name = "PVDD_MIF_1V1"; |
| 672 |
regulator-min-microvolt = <800000>; |
| 673 |
regulator-max-microvolt = <1300000>; |
| 674 |
regulator-always-on; |
| 675 |
|
| 676 |
regulator-state-mem { |
| 677 |
regulator-off-in-suspend; |
| 678 |
}; |
| 679 |
}; |
| 680 |
|
| 681 |
buck2_reg: BUCK2 { |
| 682 |
regulator-name = "PVDD_ARM_1V0"; |
| 683 |
regulator-min-microvolt = <800000>; |
| 684 |
regulator-max-microvolt = <1500000>; |
| 685 |
regulator-always-on; |
| 686 |
|
| 687 |
regulator-state-mem { |
| 688 |
regulator-off-in-suspend; |
| 689 |
}; |
| 690 |
}; |
| 691 |
|
| 692 |
buck3_reg: BUCK3 { |
| 693 |
regulator-name = "PVDD_INT_1V0"; |
| 694 |
regulator-min-microvolt = <800000>; |
| 695 |
regulator-max-microvolt = <1400000>; |
| 696 |
regulator-always-on; |
| 697 |
|
| 698 |
regulator-state-mem { |
| 699 |
regulator-off-in-suspend; |
| 700 |
}; |
| 701 |
}; |
| 702 |
|
| 703 |
buck4_reg: BUCK4 { |
| 704 |
regulator-name = "PVDD_G3D_1V0"; |
| 705 |
regulator-min-microvolt = <800000>; |
| 706 |
regulator-max-microvolt = <1400000>; |
| 707 |
regulator-always-on; |
| 708 |
|
| 709 |
regulator-state-mem { |
| 710 |
regulator-off-in-suspend; |
| 711 |
}; |
| 712 |
}; |
| 713 |
|
| 714 |
buck5_reg: BUCK5 { |
| 715 |
regulator-name = "PVDD_LPDDR3_1V2"; |
| 716 |
regulator-min-microvolt = <800000>; |
| 717 |
regulator-max-microvolt = <1400000>; |
| 718 |
regulator-always-on; |
| 719 |
}; |
| 720 |
|
| 721 |
buck6_reg: BUCK6 { |
| 722 |
regulator-name = "PVDD_KFC_1V0"; |
| 723 |
regulator-min-microvolt = <800000>; |
| 724 |
regulator-max-microvolt = <1500000>; |
| 725 |
regulator-always-on; |
| 726 |
|
| 727 |
regulator-state-mem { |
| 728 |
regulator-off-in-suspend; |
| 729 |
}; |
| 730 |
}; |
| 731 |
|
| 732 |
buck7_reg: BUCK7 { |
| 733 |
regulator-name = "VIN_LLDO_1V4"; |
| 734 |
regulator-min-microvolt = <1200000>; |
| 735 |
regulator-max-microvolt = <1500000>; |
| 736 |
regulator-always-on; |
| 737 |
}; |
| 738 |
|
| 739 |
buck8_reg: BUCK8 { |
| 740 |
regulator-name = "VIN_MLDO_2V0"; |
| 741 |
regulator-min-microvolt = <1800000>; |
| 742 |
regulator-max-microvolt = <2100000>; |
| 743 |
regulator-always-on; |
| 744 |
}; |
| 745 |
|
| 746 |
buck9_reg: BUCK9 { |
| 747 |
regulator-name = "VIN_HLDO_3V5"; |
| 748 |
regulator-min-microvolt = <3000000>; |
| 749 |
regulator-max-microvolt = <3500000>; |
| 750 |
regulator-always-on; |
| 751 |
}; |
| 752 |
|
| 753 |
buck10_reg: BUCK10 { |
| 754 |
regulator-name = "PVDD_EMMCF_2V8"; |
| 755 |
regulator-min-microvolt = <2800000>; |
| 756 |
regulator-max-microvolt = <2800000>; |
| 757 |
/* |
| 758 |
* Must stay in "off" mode during shutdown for |
| 759 |
* proper eMMC reset. The "off" mode is in |
| 760 |
* fact controlled by BUCK10EN. The eMMC does |
| 761 |
* not have reset pin connected so the reset |
| 762 |
* will be triggered by falling edge of |
| 763 |
* BUCK10EN. |
| 764 |
*/ |
| 765 |
|
| 766 |
regulator-state-mem { |
| 767 |
regulator-off-in-suspend; |
| 768 |
}; |
| 769 |
}; |
| 770 |
}; |
| 771 |
}; |
| 772 |
}; |
| 773 |
|
| 774 |
&i2c_2 { |
| 775 |
status = "okay"; |
| 776 |
}; |
| 777 |
|
| 778 |
&mixer { |
| 779 |
status = "okay"; |
| 780 |
}; |
| 781 |
|
| 782 |
&mmc_0 { |
| 783 |
status = "okay"; |
| 784 |
non-removable; |
| 785 |
card-detect-delay = <200>; |
| 786 |
mmc-ddr-1_8v; |
| 787 |
samsung,dw-mshc-ciu-div = <3>; |
| 788 |
samsung,dw-mshc-sdr-timing = <0 4>; |
| 789 |
samsung,dw-mshc-ddr-timing = <0 2>; |
| 790 |
pinctrl-names = "default"; |
| 791 |
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; |
| 792 |
vmmc-supply = <&ldo18_reg>; |
| 793 |
vqmmc-supply = <&ldo3_reg>; |
| 794 |
bus-width = <8>; |
| 795 |
cap-mmc-highspeed; |
| 796 |
mmc-hs200-1_8v; |
| 797 |
}; |
| 798 |
|
| 799 |
&mmc_2 { |
| 800 |
status = "okay"; |
| 801 |
card-detect-delay = <200>; |
| 802 |
samsung,dw-mshc-ciu-div = <3>; |
| 803 |
samsung,dw-mshc-sdr-timing = <0 4>; |
| 804 |
samsung,dw-mshc-ddr-timing = <0 2>; |
| 805 |
pinctrl-names = "default"; |
| 806 |
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; |
| 807 |
vmmc-supply = <&ldo19_reg>; |
| 808 |
vqmmc-supply = <&ldo13_reg>; |
| 809 |
bus-width = <4>; |
| 810 |
cap-sd-highspeed; |
| 811 |
sd-uhs-sdr50; |
| 812 |
sd-uhs-sdr104; |
| 813 |
sd-uhs-ddr50; |
| 814 |
}; |
| 815 |
|
| 816 |
&pinctrl_0 { |
| 817 |
s2mps11_irq: s2mps11-irq-pins { |
| 818 |
samsung,pins = "gpx3-2"; |
| 819 |
samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
| 820 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 821 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 822 |
}; |
| 823 |
}; |
| 824 |
|
| 825 |
&rtc { |
| 826 |
status = "okay"; |
| 827 |
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; |
| 828 |
clock-names = "rtc", "rtc_src"; |
| 829 |
}; |
| 830 |
|
| 831 |
&usbdrd_dwc3_1 { |
| 832 |
dr_mode = "host"; |
| 833 |
}; |
| 834 |
|
| 835 |
&usbdrd3_0 { |
| 836 |
vdd10-supply = <&ldo11_reg>; |
| 837 |
vdd33-supply = <&ldo9_reg>; |
| 838 |
}; |
| 839 |
|
| 840 |
&usbdrd3_1 { |
| 841 |
vdd10-supply = <&ldo11_reg>; |
| 842 |
vdd33-supply = <&ldo9_reg>; |
| 843 |
}; |