| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung's Exynos3250 based Rinato board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2014 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
* |
| 8 |
* Device tree source file for Samsung's Rinato board which is based on |
| 9 |
* Samsung Exynos3250 SoC. |
| 10 |
*/ |
| 11 |
|
| 12 |
/dts-v1/; |
| 13 |
#include "exynos3250.dtsi" |
| 14 |
#include "exynos4412-ppmu-common.dtsi" |
| 15 |
#include <dt-bindings/input/input.h> |
| 16 |
#include <dt-bindings/gpio/gpio.h> |
| 17 |
#include <dt-bindings/clock/samsung,s2mps11.h> |
| 18 |
|
| 19 |
/ { |
| 20 |
model = "Samsung Rinato board"; |
| 21 |
compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3"; |
| 22 |
chassis-type = "watch"; |
| 23 |
|
| 24 |
aliases { |
| 25 |
i2c7 = &i2c_max77836; |
| 26 |
mmc0 = &mshc_0; |
| 27 |
mmc1 = &mshc_1; |
| 28 |
}; |
| 29 |
|
| 30 |
chosen { |
| 31 |
stdout-path = &serial_1; |
| 32 |
}; |
| 33 |
|
| 34 |
memory@40000000 { |
| 35 |
device_type = "memory"; |
| 36 |
reg = <0x40000000 0x1ff00000>; |
| 37 |
}; |
| 38 |
|
| 39 |
firmware@205f000 { |
| 40 |
compatible = "samsung,secure-firmware"; |
| 41 |
reg = <0x0205f000 0x1000>; |
| 42 |
}; |
| 43 |
|
| 44 |
gpio-keys { |
| 45 |
compatible = "gpio-keys"; |
| 46 |
|
| 47 |
power-key { |
| 48 |
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
| 49 |
linux,code = <KEY_POWER>; |
| 50 |
label = "power key"; |
| 51 |
debounce-interval = <10>; |
| 52 |
wakeup-source; |
| 53 |
}; |
| 54 |
}; |
| 55 |
|
| 56 |
wlan_pwrseq: mshc1-pwrseq { |
| 57 |
compatible = "mmc-pwrseq-simple"; |
| 58 |
reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; |
| 59 |
}; |
| 60 |
|
| 61 |
i2c_max77836: i2c-8 { |
| 62 |
compatible = "i2c-gpio"; |
| 63 |
sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 64 |
scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 65 |
#address-cells = <1>; |
| 66 |
#size-cells = <0>; |
| 67 |
|
| 68 |
max77836: pmic@25 { |
| 69 |
compatible = "maxim,max77836"; |
| 70 |
interrupt-parent = <&gpx1>; |
| 71 |
interrupts = <5 IRQ_TYPE_NONE>; |
| 72 |
reg = <0x25>; |
| 73 |
wakeup-source; |
| 74 |
|
| 75 |
extcon { |
| 76 |
compatible = "maxim,max77836-muic"; |
| 77 |
}; |
| 78 |
|
| 79 |
regulators { |
| 80 |
compatible = "maxim,max77836-regulator"; |
| 81 |
safeout_reg: SAFEOUT { |
| 82 |
regulator-name = "SAFEOUT"; |
| 83 |
}; |
| 84 |
|
| 85 |
charger_reg: CHARGER { |
| 86 |
regulator-name = "CHARGER"; |
| 87 |
regulator-min-microamp = <45000>; |
| 88 |
regulator-max-microamp = <475000>; |
| 89 |
regulator-boot-on; |
| 90 |
}; |
| 91 |
|
| 92 |
motor_reg: LDO1 { |
| 93 |
regulator-name = "MOT_2.7V"; |
| 94 |
regulator-min-microvolt = <1100000>; |
| 95 |
regulator-max-microvolt = <2700000>; |
| 96 |
}; |
| 97 |
|
| 98 |
LDO2 { |
| 99 |
regulator-name = "UNUSED_LDO2"; |
| 100 |
regulator-min-microvolt = <800000>; |
| 101 |
regulator-max-microvolt = <3950000>; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
charger { |
| 106 |
compatible = "maxim,max77836-charger"; |
| 107 |
|
| 108 |
maxim,constant-uvolt = <4350000>; |
| 109 |
maxim,fast-charge-uamp = <225000>; |
| 110 |
maxim,eoc-uamp = <7500>; |
| 111 |
maxim,ovp-uvolt = <6500000>; |
| 112 |
}; |
| 113 |
}; |
| 114 |
}; |
| 115 |
|
| 116 |
haptics { |
| 117 |
compatible = "regulator-haptic"; |
| 118 |
haptic-supply = <&motor_reg>; |
| 119 |
min-microvolt = <1100000>; |
| 120 |
max-microvolt = <2700000>; |
| 121 |
}; |
| 122 |
|
| 123 |
thermal-zones { |
| 124 |
cpu_thermal: cpu-thermal { |
| 125 |
cooling-maps { |
| 126 |
map0 { |
| 127 |
/* Corresponds to 500MHz */ |
| 128 |
cooling-device = <&cpu0 5 5>, |
| 129 |
<&cpu1 5 5>; |
| 130 |
}; |
| 131 |
map1 { |
| 132 |
/* Corresponds to 200MHz */ |
| 133 |
cooling-device = <&cpu0 8 8>, |
| 134 |
<&cpu1 8 8>; |
| 135 |
}; |
| 136 |
}; |
| 137 |
}; |
| 138 |
}; |
| 139 |
}; |
| 140 |
|
| 141 |
&adc { |
| 142 |
vdd-supply = <&ldo3_reg>; |
| 143 |
status = "okay"; |
| 144 |
assigned-clocks = <&cmu CLK_SCLK_TSADC>; |
| 145 |
assigned-clock-rates = <6000000>; |
| 146 |
|
| 147 |
thermistor-ap { |
| 148 |
compatible = "murata,ncp15wb473"; |
| 149 |
pullup-uv = <1800000>; |
| 150 |
pullup-ohm = <100000>; |
| 151 |
pulldown-ohm = <100000>; |
| 152 |
io-channels = <&adc 0>; |
| 153 |
}; |
| 154 |
|
| 155 |
thermistor-battery { |
| 156 |
compatible = "murata,ncp15wb473"; |
| 157 |
pullup-uv = <1800000>; |
| 158 |
pullup-ohm = <100000>; |
| 159 |
pulldown-ohm = <100000>; |
| 160 |
io-channels = <&adc 1>; |
| 161 |
}; |
| 162 |
}; |
| 163 |
|
| 164 |
&bus_dmc { |
| 165 |
devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; |
| 166 |
vdd-supply = <&buck1_reg>; |
| 167 |
status = "okay"; |
| 168 |
}; |
| 169 |
|
| 170 |
&bus_leftbus { |
| 171 |
devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; |
| 172 |
vdd-supply = <&buck3_reg>; |
| 173 |
status = "okay"; |
| 174 |
}; |
| 175 |
|
| 176 |
&bus_rightbus { |
| 177 |
devfreq = <&bus_leftbus>; |
| 178 |
status = "okay"; |
| 179 |
}; |
| 180 |
|
| 181 |
&bus_lcd0 { |
| 182 |
devfreq = <&bus_leftbus>; |
| 183 |
status = "okay"; |
| 184 |
}; |
| 185 |
|
| 186 |
&bus_fsys { |
| 187 |
devfreq = <&bus_leftbus>; |
| 188 |
status = "okay"; |
| 189 |
}; |
| 190 |
|
| 191 |
&bus_mcuisp { |
| 192 |
devfreq = <&bus_leftbus>; |
| 193 |
status = "okay"; |
| 194 |
}; |
| 195 |
|
| 196 |
&bus_isp { |
| 197 |
devfreq = <&bus_leftbus>; |
| 198 |
status = "okay"; |
| 199 |
}; |
| 200 |
|
| 201 |
&bus_peril { |
| 202 |
devfreq = <&bus_leftbus>; |
| 203 |
status = "okay"; |
| 204 |
}; |
| 205 |
|
| 206 |
&bus_mfc { |
| 207 |
devfreq = <&bus_leftbus>; |
| 208 |
status = "okay"; |
| 209 |
}; |
| 210 |
|
| 211 |
&cmu { |
| 212 |
clocks = <&xusbxti>; |
| 213 |
}; |
| 214 |
|
| 215 |
&cpu0 { |
| 216 |
cpu0-supply = <&buck2_reg>; |
| 217 |
}; |
| 218 |
|
| 219 |
&exynos_usbphy { |
| 220 |
status = "okay"; |
| 221 |
vbus-supply = <&safeout_reg>; |
| 222 |
}; |
| 223 |
|
| 224 |
&hsotg { |
| 225 |
vusb_d-supply = <&ldo15_reg>; |
| 226 |
vusb_a-supply = <&ldo12_reg>; |
| 227 |
dr_mode = "peripheral"; |
| 228 |
status = "okay"; |
| 229 |
}; |
| 230 |
|
| 231 |
&dsi_0 { |
| 232 |
vddcore-supply = <&ldo6_reg>; |
| 233 |
vddio-supply = <&ldo6_reg>; |
| 234 |
samsung,burst-clock-frequency = <250000000>; |
| 235 |
samsung,esc-clock-frequency = <20000000>; |
| 236 |
samsung,pll-clock-frequency = <24000000>; |
| 237 |
status = "okay"; |
| 238 |
|
| 239 |
panel@0 { |
| 240 |
compatible = "samsung,s6e63j0x03"; |
| 241 |
reg = <0>; |
| 242 |
vdd3-supply = <&ldo16_reg>; |
| 243 |
vci-supply = <&ldo20_reg>; |
| 244 |
reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; |
| 245 |
te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; |
| 246 |
}; |
| 247 |
}; |
| 248 |
|
| 249 |
&fimd { |
| 250 |
status = "okay"; |
| 251 |
|
| 252 |
i80-if-timings { |
| 253 |
cs-setup = <0>; |
| 254 |
wr-setup = <0>; |
| 255 |
wr-active = <1>; |
| 256 |
wr-hold = <0>; |
| 257 |
}; |
| 258 |
}; |
| 259 |
|
| 260 |
&gpu { |
| 261 |
mali-supply = <&buck3_reg>; |
| 262 |
status = "okay"; |
| 263 |
}; |
| 264 |
|
| 265 |
&i2c_0 { |
| 266 |
#address-cells = <1>; |
| 267 |
#size-cells = <0>; |
| 268 |
samsung,i2c-sda-delay = <100>; |
| 269 |
samsung,i2c-slave-addr = <0x10>; |
| 270 |
samsung,i2c-max-bus-freq = <100000>; |
| 271 |
status = "okay"; |
| 272 |
|
| 273 |
pmic@66 { |
| 274 |
compatible = "samsung,s2mps14-pmic"; |
| 275 |
interrupt-parent = <&gpx0>; |
| 276 |
interrupts = <7 IRQ_TYPE_LEVEL_LOW>; |
| 277 |
reg = <0x66>; |
| 278 |
wakeup-source; |
| 279 |
|
| 280 |
s2mps14_osc: clocks { |
| 281 |
compatible = "samsung,s2mps14-clk"; |
| 282 |
#clock-cells = <1>; |
| 283 |
clock-output-names = "s2mps14_ap", "unused", |
| 284 |
"s2mps14_bt"; |
| 285 |
}; |
| 286 |
|
| 287 |
regulators { |
| 288 |
ldo1_reg: LDO1 { |
| 289 |
regulator-name = "VAP_ALIVE_1.0V"; |
| 290 |
regulator-min-microvolt = <1000000>; |
| 291 |
regulator-max-microvolt = <1000000>; |
| 292 |
regulator-always-on; |
| 293 |
|
| 294 |
regulator-state-mem { |
| 295 |
regulator-on-in-suspend; |
| 296 |
}; |
| 297 |
}; |
| 298 |
|
| 299 |
ldo2_reg: LDO2 { |
| 300 |
regulator-name = "VAP_M1_1.2V"; |
| 301 |
regulator-min-microvolt = <1200000>; |
| 302 |
regulator-max-microvolt = <1200000>; |
| 303 |
regulator-always-on; |
| 304 |
|
| 305 |
regulator-state-mem { |
| 306 |
regulator-off-in-suspend; |
| 307 |
}; |
| 308 |
}; |
| 309 |
|
| 310 |
ldo3_reg: LDO3 { |
| 311 |
regulator-name = "VCC_AP_1.8V"; |
| 312 |
regulator-min-microvolt = <1800000>; |
| 313 |
regulator-max-microvolt = <1800000>; |
| 314 |
regulator-always-on; |
| 315 |
|
| 316 |
regulator-state-mem { |
| 317 |
regulator-off-in-suspend; |
| 318 |
}; |
| 319 |
}; |
| 320 |
|
| 321 |
ldo4_reg: LDO4 { |
| 322 |
regulator-name = "VAP_AVDD_PLL1"; |
| 323 |
regulator-min-microvolt = <1800000>; |
| 324 |
regulator-max-microvolt = <1800000>; |
| 325 |
regulator-always-on; |
| 326 |
|
| 327 |
regulator-state-mem { |
| 328 |
regulator-off-in-suspend; |
| 329 |
}; |
| 330 |
}; |
| 331 |
|
| 332 |
ldo5_reg: LDO5 { |
| 333 |
regulator-name = "VAP_PLL_ISO_1.0V"; |
| 334 |
regulator-min-microvolt = <1000000>; |
| 335 |
regulator-max-microvolt = <1000000>; |
| 336 |
regulator-always-on; |
| 337 |
|
| 338 |
regulator-state-mem { |
| 339 |
regulator-off-in-suspend; |
| 340 |
}; |
| 341 |
}; |
| 342 |
|
| 343 |
ldo6_reg: LDO6 { |
| 344 |
regulator-name = "VAP_VMIPI_1.0V"; |
| 345 |
regulator-min-microvolt = <1000000>; |
| 346 |
regulator-max-microvolt = <1000000>; |
| 347 |
regulator-always-on; |
| 348 |
|
| 349 |
regulator-state-mem { |
| 350 |
regulator-off-in-suspend; |
| 351 |
}; |
| 352 |
}; |
| 353 |
|
| 354 |
ldo7_reg: LDO7 { |
| 355 |
regulator-name = "VAP_AVDD_1.8V"; |
| 356 |
regulator-min-microvolt = <1800000>; |
| 357 |
regulator-max-microvolt = <1800000>; |
| 358 |
regulator-always-on; |
| 359 |
|
| 360 |
regulator-state-mem { |
| 361 |
regulator-off-in-suspend; |
| 362 |
}; |
| 363 |
}; |
| 364 |
|
| 365 |
ldo8_reg: LDO8 { |
| 366 |
regulator-name = "VAP_USB_3.0V"; |
| 367 |
regulator-min-microvolt = <3000000>; |
| 368 |
regulator-max-microvolt = <3000000>; |
| 369 |
regulator-always-on; |
| 370 |
|
| 371 |
regulator-state-mem { |
| 372 |
regulator-off-in-suspend; |
| 373 |
}; |
| 374 |
}; |
| 375 |
|
| 376 |
ldo9_reg: LDO9 { |
| 377 |
regulator-name = "V_LPDDR_1.2V"; |
| 378 |
regulator-min-microvolt = <1200000>; |
| 379 |
regulator-max-microvolt = <1200000>; |
| 380 |
regulator-always-on; |
| 381 |
|
| 382 |
regulator-state-mem { |
| 383 |
regulator-on-in-suspend; |
| 384 |
}; |
| 385 |
}; |
| 386 |
|
| 387 |
ldo10_reg: LDO10 { |
| 388 |
regulator-name = "UNUSED_LDO10"; |
| 389 |
regulator-min-microvolt = <1000000>; |
| 390 |
regulator-max-microvolt = <1000000>; |
| 391 |
|
| 392 |
regulator-state-mem { |
| 393 |
regulator-off-in-suspend; |
| 394 |
}; |
| 395 |
}; |
| 396 |
|
| 397 |
ldo11_reg: LDO11 { |
| 398 |
regulator-name = "V_EMMC_1.8V"; |
| 399 |
regulator-min-microvolt = <1800000>; |
| 400 |
regulator-max-microvolt = <1800000>; |
| 401 |
samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
| 402 |
}; |
| 403 |
|
| 404 |
ldo12_reg: LDO12 { |
| 405 |
regulator-name = "V_EMMC_2.8V"; |
| 406 |
regulator-min-microvolt = <2800000>; |
| 407 |
regulator-max-microvolt = <2800000>; |
| 408 |
samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
| 409 |
}; |
| 410 |
|
| 411 |
ldo13_reg: LDO13 { |
| 412 |
regulator-name = "CAM_AVDD_2.8V"; |
| 413 |
regulator-min-microvolt = <2800000>; |
| 414 |
regulator-max-microvolt = <2800000>; |
| 415 |
|
| 416 |
regulator-state-mem { |
| 417 |
regulator-off-in-suspend; |
| 418 |
}; |
| 419 |
}; |
| 420 |
|
| 421 |
ldo14_reg: LDO14 { |
| 422 |
regulator-name = "UNUSED_LDO14"; |
| 423 |
regulator-min-microvolt = <2700000>; |
| 424 |
regulator-max-microvolt = <2700000>; |
| 425 |
|
| 426 |
regulator-state-mem { |
| 427 |
regulator-off-in-suspend; |
| 428 |
}; |
| 429 |
}; |
| 430 |
|
| 431 |
ldo15_reg: LDO15 { |
| 432 |
regulator-name = "TSP_AVDD_3.3V"; |
| 433 |
regulator-min-microvolt = <3300000>; |
| 434 |
regulator-max-microvolt = <3300000>; |
| 435 |
|
| 436 |
regulator-state-mem { |
| 437 |
regulator-off-in-suspend; |
| 438 |
}; |
| 439 |
}; |
| 440 |
|
| 441 |
ldo16_reg: LDO16 { |
| 442 |
regulator-name = "LCD_VDD_3.3V"; |
| 443 |
regulator-min-microvolt = <3300000>; |
| 444 |
regulator-max-microvolt = <3300000>; |
| 445 |
|
| 446 |
regulator-state-mem { |
| 447 |
regulator-off-in-suspend; |
| 448 |
}; |
| 449 |
}; |
| 450 |
|
| 451 |
ldo17_reg: LDO17 { |
| 452 |
regulator-name = "V_IRLED_3.3V"; |
| 453 |
regulator-min-microvolt = <3300000>; |
| 454 |
regulator-max-microvolt = <3300000>; |
| 455 |
|
| 456 |
regulator-state-mem { |
| 457 |
regulator-off-in-suspend; |
| 458 |
}; |
| 459 |
}; |
| 460 |
|
| 461 |
ldo18_reg: LDO18 { |
| 462 |
regulator-name = "CAM_AF_2.8V"; |
| 463 |
regulator-min-microvolt = <2800000>; |
| 464 |
regulator-max-microvolt = <2800000>; |
| 465 |
|
| 466 |
regulator-state-mem { |
| 467 |
regulator-off-in-suspend; |
| 468 |
}; |
| 469 |
}; |
| 470 |
|
| 471 |
ldo19_reg: LDO19 { |
| 472 |
regulator-name = "TSP_VDD_1.8V"; |
| 473 |
regulator-min-microvolt = <1800000>; |
| 474 |
regulator-max-microvolt = <1800000>; |
| 475 |
|
| 476 |
regulator-state-mem { |
| 477 |
regulator-off-in-suspend; |
| 478 |
}; |
| 479 |
}; |
| 480 |
|
| 481 |
ldo20_reg: LDO20 { |
| 482 |
regulator-name = "LCD_VDD_1.8V"; |
| 483 |
regulator-min-microvolt = <1800000>; |
| 484 |
regulator-max-microvolt = <1800000>; |
| 485 |
|
| 486 |
regulator-state-mem { |
| 487 |
regulator-off-in-suspend; |
| 488 |
}; |
| 489 |
}; |
| 490 |
|
| 491 |
ldo21_reg: LDO21 { |
| 492 |
regulator-name = "CAM_IO_1.8V"; |
| 493 |
regulator-min-microvolt = <1800000>; |
| 494 |
regulator-max-microvolt = <1800000>; |
| 495 |
|
| 496 |
regulator-state-mem { |
| 497 |
regulator-off-in-suspend; |
| 498 |
}; |
| 499 |
}; |
| 500 |
|
| 501 |
ldo22_reg: LDO22 { |
| 502 |
regulator-name = "CAM_DVDD_1.2V"; |
| 503 |
regulator-min-microvolt = <1200000>; |
| 504 |
regulator-max-microvolt = <1200000>; |
| 505 |
|
| 506 |
regulator-state-mem { |
| 507 |
regulator-off-in-suspend; |
| 508 |
}; |
| 509 |
}; |
| 510 |
|
| 511 |
ldo23_reg: LDO23 { |
| 512 |
regulator-name = "HRM_VCC_1.8V"; |
| 513 |
regulator-min-microvolt = <1800000>; |
| 514 |
regulator-max-microvolt = <1800000>; |
| 515 |
regulator-always-on; |
| 516 |
}; |
| 517 |
|
| 518 |
ldo24_reg: LDO24 { |
| 519 |
regulator-name = "HRM_VCC_3.3V"; |
| 520 |
regulator-min-microvolt = <3000000>; |
| 521 |
regulator-max-microvolt = <3000000>; |
| 522 |
|
| 523 |
regulator-state-mem { |
| 524 |
regulator-off-in-suspend; |
| 525 |
}; |
| 526 |
}; |
| 527 |
|
| 528 |
ldo25_reg: LDO25 { |
| 529 |
regulator-name = "UNUSED_LDO25"; |
| 530 |
regulator-min-microvolt = <3000000>; |
| 531 |
regulator-max-microvolt = <3000000>; |
| 532 |
|
| 533 |
regulator-state-mem { |
| 534 |
regulator-off-in-suspend; |
| 535 |
}; |
| 536 |
}; |
| 537 |
|
| 538 |
buck1_reg: BUCK1 { |
| 539 |
regulator-name = "VAP_MIF_1.0V"; |
| 540 |
regulator-min-microvolt = <800000>; |
| 541 |
regulator-max-microvolt = <900000>; |
| 542 |
regulator-always-on; |
| 543 |
|
| 544 |
regulator-state-mem { |
| 545 |
regulator-off-in-suspend; |
| 546 |
}; |
| 547 |
}; |
| 548 |
|
| 549 |
buck2_reg: BUCK2 { |
| 550 |
regulator-name = "VAP_ARM_1.0V"; |
| 551 |
regulator-min-microvolt = <850000>; |
| 552 |
regulator-max-microvolt = <1150000>; |
| 553 |
regulator-always-on; |
| 554 |
|
| 555 |
regulator-state-mem { |
| 556 |
regulator-off-in-suspend; |
| 557 |
}; |
| 558 |
}; |
| 559 |
|
| 560 |
buck3_reg: BUCK3 { |
| 561 |
regulator-name = "VAP_INT3D_1.0V"; |
| 562 |
regulator-min-microvolt = <850000>; |
| 563 |
regulator-max-microvolt = <1000000>; |
| 564 |
regulator-always-on; |
| 565 |
|
| 566 |
regulator-state-mem { |
| 567 |
regulator-off-in-suspend; |
| 568 |
}; |
| 569 |
}; |
| 570 |
|
| 571 |
buck4_reg: BUCK4 { |
| 572 |
regulator-name = "VCC_SUB_1.95V"; |
| 573 |
regulator-min-microvolt = <1950000>; |
| 574 |
regulator-max-microvolt = <1950000>; |
| 575 |
regulator-always-on; |
| 576 |
|
| 577 |
regulator-state-mem { |
| 578 |
regulator-on-in-suspend; |
| 579 |
}; |
| 580 |
}; |
| 581 |
|
| 582 |
buck5_reg: BUCK5 { |
| 583 |
regulator-name = "VCC_SUB_1.35V"; |
| 584 |
regulator-min-microvolt = <1350000>; |
| 585 |
regulator-max-microvolt = <1350000>; |
| 586 |
regulator-always-on; |
| 587 |
|
| 588 |
regulator-state-mem { |
| 589 |
regulator-on-in-suspend; |
| 590 |
}; |
| 591 |
}; |
| 592 |
}; |
| 593 |
}; |
| 594 |
}; |
| 595 |
|
| 596 |
&i2c_1 { |
| 597 |
#address-cells = <1>; |
| 598 |
#size-cells = <0>; |
| 599 |
samsung,i2c-sda-delay = <100>; |
| 600 |
samsung,i2c-slave-addr = <0x10>; |
| 601 |
samsung,i2c-max-bus-freq = <400000>; |
| 602 |
status = "okay"; |
| 603 |
|
| 604 |
fuelgauge@36 { |
| 605 |
compatible = "maxim,max77836-battery"; |
| 606 |
interrupt-parent = <&gpx1>; |
| 607 |
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
| 608 |
reg = <0x36>; |
| 609 |
}; |
| 610 |
}; |
| 611 |
|
| 612 |
&i2s2 { |
| 613 |
status = "okay"; |
| 614 |
}; |
| 615 |
|
| 616 |
&jpeg { |
| 617 |
status = "okay"; |
| 618 |
}; |
| 619 |
|
| 620 |
&mshc_0 { |
| 621 |
broken-cd; |
| 622 |
non-removable; |
| 623 |
cap-mmc-highspeed; |
| 624 |
mmc-hs200-1_8v; |
| 625 |
card-detect-delay = <200>; |
| 626 |
vmmc-supply = <&ldo12_reg>; |
| 627 |
clock-frequency = <100000000>; |
| 628 |
max-frequency = <100000000>; |
| 629 |
mmc-ddr-1_8v; |
| 630 |
samsung,dw-mshc-ciu-div = <1>; |
| 631 |
samsung,dw-mshc-sdr-timing = <0 1>; |
| 632 |
samsung,dw-mshc-ddr-timing = <1 2>; |
| 633 |
pinctrl-names = "default"; |
| 634 |
pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; |
| 635 |
bus-width = <8>; |
| 636 |
status = "okay"; |
| 637 |
}; |
| 638 |
|
| 639 |
&mshc_1 { |
| 640 |
status = "okay"; |
| 641 |
|
| 642 |
#address-cells = <1>; |
| 643 |
#size-cells = <0>; |
| 644 |
|
| 645 |
non-removable; |
| 646 |
cap-sd-highspeed; |
| 647 |
cap-sdio-irq; |
| 648 |
keep-power-in-suspend; |
| 649 |
samsung,dw-mshc-ciu-div = <1>; |
| 650 |
samsung,dw-mshc-sdr-timing = <0 1>; |
| 651 |
samsung,dw-mshc-ddr-timing = <1 2>; |
| 652 |
pinctrl-names = "default"; |
| 653 |
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>; |
| 654 |
bus-width = <4>; |
| 655 |
|
| 656 |
mmc-pwrseq = <&wlan_pwrseq>; |
| 657 |
|
| 658 |
brcmf: wifi@1 { |
| 659 |
compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac"; |
| 660 |
reg = <1>; |
| 661 |
|
| 662 |
interrupt-parent = <&gpx1>; |
| 663 |
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; |
| 664 |
interrupt-names = "host-wake"; |
| 665 |
}; |
| 666 |
}; |
| 667 |
|
| 668 |
&serial_0 { |
| 669 |
assigned-clocks = <&cmu CLK_SCLK_UART0>; |
| 670 |
assigned-clock-rates = <100000000>; |
| 671 |
status = "okay"; |
| 672 |
|
| 673 |
bluetooth { |
| 674 |
compatible = "brcm,bcm4330-bt"; |
| 675 |
max-speed = <3000000>; |
| 676 |
shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>; |
| 677 |
device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; |
| 678 |
host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; |
| 679 |
clocks = <&s2mps14_osc S2MPS11_CLK_BT>; |
| 680 |
}; |
| 681 |
}; |
| 682 |
|
| 683 |
&serial_1 { |
| 684 |
status = "okay"; |
| 685 |
}; |
| 686 |
|
| 687 |
&tmu { |
| 688 |
vtmu-supply = <&ldo7_reg>; |
| 689 |
status = "okay"; |
| 690 |
}; |
| 691 |
|
| 692 |
&rtc { |
| 693 |
clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; |
| 694 |
clock-names = "rtc", "rtc_src"; |
| 695 |
status = "okay"; |
| 696 |
}; |
| 697 |
|
| 698 |
&xusbxti { |
| 699 |
clock-frequency = <24000000>; |
| 700 |
}; |
| 701 |
|
| 702 |
&pinctrl_0 { |
| 703 |
pinctrl-names = "default"; |
| 704 |
pinctrl-0 = <&initial0 &sleep0>; |
| 705 |
|
| 706 |
initial0: initial-state { |
| 707 |
PIN_IN(gpa1-4, DOWN, LV1); |
| 708 |
PIN_IN(gpa1-5, DOWN, LV1); |
| 709 |
|
| 710 |
PIN_IN(gpc0-0, DOWN, LV1); |
| 711 |
PIN_IN(gpc0-1, DOWN, LV1); |
| 712 |
PIN_IN(gpc0-2, DOWN, LV1); |
| 713 |
PIN_IN(gpc0-3, DOWN, LV1); |
| 714 |
PIN_IN(gpc0-4, DOWN, LV1); |
| 715 |
|
| 716 |
PIN_IN(gpd0-0, DOWN, LV1); |
| 717 |
PIN_IN(gpd0-1, DOWN, LV1); |
| 718 |
}; |
| 719 |
|
| 720 |
sleep0: sleep-state { |
| 721 |
PIN_SLP(gpa0-0, INPUT, DOWN); |
| 722 |
PIN_SLP(gpa0-1, INPUT, DOWN); |
| 723 |
PIN_SLP(gpa0-2, INPUT, DOWN); |
| 724 |
PIN_SLP(gpa0-3, INPUT, DOWN); |
| 725 |
PIN_SLP(gpa0-4, INPUT, DOWN); |
| 726 |
PIN_SLP(gpa0-5, INPUT, DOWN); |
| 727 |
PIN_SLP(gpa0-6, INPUT, DOWN); |
| 728 |
PIN_SLP(gpa0-7, INPUT, DOWN); |
| 729 |
|
| 730 |
PIN_SLP(gpa1-0, INPUT, DOWN); |
| 731 |
PIN_SLP(gpa1-1, INPUT, DOWN); |
| 732 |
PIN_SLP(gpa1-2, INPUT, DOWN); |
| 733 |
PIN_SLP(gpa1-3, INPUT, DOWN); |
| 734 |
PIN_SLP(gpa1-4, INPUT, DOWN); |
| 735 |
PIN_SLP(gpa1-5, INPUT, DOWN); |
| 736 |
|
| 737 |
PIN_SLP(gpb-0, PREV, NONE); |
| 738 |
PIN_SLP(gpb-1, PREV, NONE); |
| 739 |
PIN_SLP(gpb-2, PREV, NONE); |
| 740 |
PIN_SLP(gpb-3, PREV, NONE); |
| 741 |
PIN_SLP(gpb-4, INPUT, DOWN); |
| 742 |
PIN_SLP(gpb-5, INPUT, DOWN); |
| 743 |
PIN_SLP(gpb-6, INPUT, DOWN); |
| 744 |
PIN_SLP(gpb-7, INPUT, DOWN); |
| 745 |
|
| 746 |
PIN_SLP(gpc0-0, INPUT, DOWN); |
| 747 |
PIN_SLP(gpc0-1, INPUT, DOWN); |
| 748 |
PIN_SLP(gpc0-2, INPUT, DOWN); |
| 749 |
PIN_SLP(gpc0-3, INPUT, DOWN); |
| 750 |
PIN_SLP(gpc0-4, INPUT, DOWN); |
| 751 |
|
| 752 |
PIN_SLP(gpc1-0, INPUT, DOWN); |
| 753 |
PIN_SLP(gpc1-1, INPUT, DOWN); |
| 754 |
PIN_SLP(gpc1-2, INPUT, DOWN); |
| 755 |
PIN_SLP(gpc1-3, INPUT, DOWN); |
| 756 |
PIN_SLP(gpc1-4, INPUT, DOWN); |
| 757 |
|
| 758 |
PIN_SLP(gpd0-0, INPUT, DOWN); |
| 759 |
PIN_SLP(gpd0-1, INPUT, DOWN); |
| 760 |
PIN_SLP(gpd0-2, INPUT, NONE); |
| 761 |
PIN_SLP(gpd0-3, INPUT, NONE); |
| 762 |
|
| 763 |
PIN_SLP(gpd1-0, INPUT, NONE); |
| 764 |
PIN_SLP(gpd1-1, INPUT, NONE); |
| 765 |
PIN_SLP(gpd1-2, INPUT, NONE); |
| 766 |
PIN_SLP(gpd1-3, INPUT, NONE); |
| 767 |
}; |
| 768 |
}; |
| 769 |
|
| 770 |
&pinctrl_1 { |
| 771 |
pinctrl-names = "default"; |
| 772 |
pinctrl-0 = <&initial1 &sleep1>; |
| 773 |
|
| 774 |
initial1: initial-state { |
| 775 |
PIN_IN(gpe0-6, DOWN, LV1); |
| 776 |
PIN_IN(gpe0-7, DOWN, LV1); |
| 777 |
|
| 778 |
PIN_IN(gpe1-0, DOWN, LV1); |
| 779 |
PIN_IN(gpe1-3, DOWN, LV1); |
| 780 |
PIN_IN(gpe1-4, DOWN, LV1); |
| 781 |
PIN_IN(gpe1-5, DOWN, LV1); |
| 782 |
PIN_IN(gpe1-6, DOWN, LV1); |
| 783 |
|
| 784 |
PIN_IN(gpk2-0, DOWN, LV1); |
| 785 |
PIN_IN(gpk2-1, DOWN, LV1); |
| 786 |
PIN_IN(gpk2-2, DOWN, LV1); |
| 787 |
PIN_IN(gpk2-3, DOWN, LV1); |
| 788 |
PIN_IN(gpk2-4, DOWN, LV1); |
| 789 |
PIN_IN(gpk2-5, DOWN, LV1); |
| 790 |
PIN_IN(gpk2-6, DOWN, LV1); |
| 791 |
|
| 792 |
PIN_IN(gpm0-0, DOWN, LV1); |
| 793 |
PIN_IN(gpm0-1, DOWN, LV1); |
| 794 |
PIN_IN(gpm0-2, DOWN, LV1); |
| 795 |
PIN_IN(gpm0-3, DOWN, LV1); |
| 796 |
PIN_IN(gpm0-4, DOWN, LV1); |
| 797 |
PIN_IN(gpm0-5, DOWN, LV1); |
| 798 |
PIN_IN(gpm0-6, DOWN, LV1); |
| 799 |
PIN_IN(gpm0-7, DOWN, LV1); |
| 800 |
|
| 801 |
PIN_IN(gpm1-0, DOWN, LV1); |
| 802 |
PIN_IN(gpm1-1, DOWN, LV1); |
| 803 |
PIN_IN(gpm1-2, DOWN, LV1); |
| 804 |
PIN_IN(gpm1-3, DOWN, LV1); |
| 805 |
PIN_IN(gpm1-4, DOWN, LV1); |
| 806 |
PIN_IN(gpm1-5, DOWN, LV1); |
| 807 |
PIN_IN(gpm1-6, DOWN, LV1); |
| 808 |
|
| 809 |
PIN_IN(gpm2-0, DOWN, LV1); |
| 810 |
PIN_IN(gpm2-1, DOWN, LV1); |
| 811 |
|
| 812 |
PIN_IN(gpm3-0, DOWN, LV1); |
| 813 |
PIN_IN(gpm3-1, DOWN, LV1); |
| 814 |
PIN_IN(gpm3-2, DOWN, LV1); |
| 815 |
PIN_IN(gpm3-3, DOWN, LV1); |
| 816 |
PIN_IN(gpm3-4, DOWN, LV1); |
| 817 |
|
| 818 |
PIN_IN(gpm4-1, DOWN, LV1); |
| 819 |
PIN_IN(gpm4-2, DOWN, LV1); |
| 820 |
PIN_IN(gpm4-3, DOWN, LV1); |
| 821 |
PIN_IN(gpm4-4, DOWN, LV1); |
| 822 |
PIN_IN(gpm4-5, DOWN, LV1); |
| 823 |
PIN_IN(gpm4-6, DOWN, LV1); |
| 824 |
PIN_IN(gpm4-7, DOWN, LV1); |
| 825 |
}; |
| 826 |
|
| 827 |
sleep1: sleep-state { |
| 828 |
PIN_SLP(gpe0-0, PREV, NONE); |
| 829 |
PIN_SLP(gpe0-1, PREV, NONE); |
| 830 |
PIN_SLP(gpe0-2, INPUT, DOWN); |
| 831 |
PIN_SLP(gpe0-3, INPUT, UP); |
| 832 |
PIN_SLP(gpe0-4, INPUT, DOWN); |
| 833 |
PIN_SLP(gpe0-5, INPUT, DOWN); |
| 834 |
PIN_SLP(gpe0-6, INPUT, DOWN); |
| 835 |
PIN_SLP(gpe0-7, INPUT, DOWN); |
| 836 |
|
| 837 |
PIN_SLP(gpe1-0, INPUT, DOWN); |
| 838 |
PIN_SLP(gpe1-1, PREV, NONE); |
| 839 |
PIN_SLP(gpe1-2, INPUT, DOWN); |
| 840 |
PIN_SLP(gpe1-3, INPUT, DOWN); |
| 841 |
PIN_SLP(gpe1-4, INPUT, DOWN); |
| 842 |
PIN_SLP(gpe1-5, INPUT, DOWN); |
| 843 |
PIN_SLP(gpe1-6, INPUT, DOWN); |
| 844 |
PIN_SLP(gpe1-7, INPUT, NONE); |
| 845 |
|
| 846 |
PIN_SLP(gpe2-0, INPUT, NONE); |
| 847 |
PIN_SLP(gpe2-1, INPUT, NONE); |
| 848 |
PIN_SLP(gpe2-2, INPUT, NONE); |
| 849 |
|
| 850 |
PIN_SLP(gpk0-0, INPUT, DOWN); |
| 851 |
PIN_SLP(gpk0-1, INPUT, DOWN); |
| 852 |
PIN_SLP(gpk0-2, OUT0, NONE); |
| 853 |
PIN_SLP(gpk0-3, INPUT, DOWN); |
| 854 |
PIN_SLP(gpk0-4, INPUT, DOWN); |
| 855 |
PIN_SLP(gpk0-5, INPUT, DOWN); |
| 856 |
PIN_SLP(gpk0-6, INPUT, DOWN); |
| 857 |
PIN_SLP(gpk0-7, INPUT, DOWN); |
| 858 |
|
| 859 |
PIN_SLP(gpk1-0, INPUT, DOWN); |
| 860 |
PIN_SLP(gpk1-1, INPUT, DOWN); |
| 861 |
PIN_SLP(gpk1-2, INPUT, DOWN); |
| 862 |
PIN_SLP(gpk1-3, INPUT, DOWN); |
| 863 |
PIN_SLP(gpk1-4, INPUT, DOWN); |
| 864 |
PIN_SLP(gpk1-5, INPUT, DOWN); |
| 865 |
PIN_SLP(gpk1-6, INPUT, DOWN); |
| 866 |
|
| 867 |
PIN_SLP(gpk2-0, INPUT, DOWN); |
| 868 |
PIN_SLP(gpk2-1, INPUT, DOWN); |
| 869 |
PIN_SLP(gpk2-2, INPUT, DOWN); |
| 870 |
PIN_SLP(gpk2-3, INPUT, DOWN); |
| 871 |
PIN_SLP(gpk2-4, INPUT, DOWN); |
| 872 |
PIN_SLP(gpk2-5, INPUT, DOWN); |
| 873 |
PIN_SLP(gpk2-6, INPUT, DOWN); |
| 874 |
|
| 875 |
PIN_SLP(gpl0-0, INPUT, DOWN); |
| 876 |
PIN_SLP(gpl0-1, INPUT, DOWN); |
| 877 |
PIN_SLP(gpl0-2, INPUT, DOWN); |
| 878 |
PIN_SLP(gpl0-3, INPUT, DOWN); |
| 879 |
|
| 880 |
PIN_SLP(gpm0-0, INPUT, DOWN); |
| 881 |
PIN_SLP(gpm0-1, INPUT, DOWN); |
| 882 |
PIN_SLP(gpm0-2, INPUT, DOWN); |
| 883 |
PIN_SLP(gpm0-3, INPUT, DOWN); |
| 884 |
PIN_SLP(gpm0-4, INPUT, DOWN); |
| 885 |
PIN_SLP(gpm0-5, INPUT, DOWN); |
| 886 |
PIN_SLP(gpm0-6, INPUT, DOWN); |
| 887 |
PIN_SLP(gpm0-7, INPUT, DOWN); |
| 888 |
|
| 889 |
PIN_SLP(gpm1-0, INPUT, DOWN); |
| 890 |
PIN_SLP(gpm1-1, INPUT, DOWN); |
| 891 |
PIN_SLP(gpm1-2, INPUT, DOWN); |
| 892 |
PIN_SLP(gpm1-3, INPUT, DOWN); |
| 893 |
PIN_SLP(gpm1-4, INPUT, DOWN); |
| 894 |
PIN_SLP(gpm1-5, INPUT, DOWN); |
| 895 |
PIN_SLP(gpm1-6, INPUT, DOWN); |
| 896 |
|
| 897 |
PIN_SLP(gpm2-0, INPUT, DOWN); |
| 898 |
PIN_SLP(gpm2-1, INPUT, DOWN); |
| 899 |
PIN_SLP(gpm2-2, INPUT, DOWN); |
| 900 |
PIN_SLP(gpm2-3, INPUT, DOWN); |
| 901 |
PIN_SLP(gpm2-4, INPUT, DOWN); |
| 902 |
|
| 903 |
PIN_SLP(gpm3-0, INPUT, DOWN); |
| 904 |
PIN_SLP(gpm3-1, INPUT, DOWN); |
| 905 |
PIN_SLP(gpm3-2, INPUT, DOWN); |
| 906 |
PIN_SLP(gpm3-3, INPUT, DOWN); |
| 907 |
PIN_SLP(gpm3-4, INPUT, DOWN); |
| 908 |
PIN_SLP(gpm3-5, INPUT, DOWN); |
| 909 |
PIN_SLP(gpm3-6, INPUT, DOWN); |
| 910 |
PIN_SLP(gpm3-7, INPUT, DOWN); |
| 911 |
|
| 912 |
PIN_SLP(gpm4-0, INPUT, DOWN); |
| 913 |
PIN_SLP(gpm4-1, INPUT, DOWN); |
| 914 |
PIN_SLP(gpm4-2, INPUT, DOWN); |
| 915 |
PIN_SLP(gpm4-3, INPUT, DOWN); |
| 916 |
PIN_SLP(gpm4-4, INPUT, DOWN); |
| 917 |
PIN_SLP(gpm4-5, INPUT, DOWN); |
| 918 |
PIN_SLP(gpm4-6, INPUT, DOWN); |
| 919 |
PIN_SLP(gpm4-7, INPUT, DOWN); |
| 920 |
}; |
| 921 |
}; |