| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Google Snow board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2012 Google, Inc |
| 6 |
*/ |
| 7 |
|
| 8 |
#include <dt-bindings/gpio/gpio.h> |
| 9 |
#include <dt-bindings/clock/maxim,max77686.h> |
| 10 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 11 |
#include <dt-bindings/input/input.h> |
| 12 |
#include <dt-bindings/sound/samsung-i2s.h> |
| 13 |
#include "exynos5250.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
aliases { |
| 17 |
i2c104 = &i2c_104; |
| 18 |
mmc0 = &mmc_0; /* eMMC */ |
| 19 |
mmc1 = &mmc_2; /* SD */ |
| 20 |
mmc2 = &mmc_3; /* WiFi */ |
| 21 |
}; |
| 22 |
|
| 23 |
memory@40000000 { |
| 24 |
device_type = "memory"; |
| 25 |
reg = <0x40000000 0x80000000>; |
| 26 |
}; |
| 27 |
|
| 28 |
chosen { |
| 29 |
bootargs = "console=tty1"; |
| 30 |
stdout-path = "serial3:115200n8"; |
| 31 |
}; |
| 32 |
|
| 33 |
gpio-keys { |
| 34 |
compatible = "gpio-keys"; |
| 35 |
pinctrl-names = "default"; |
| 36 |
pinctrl-0 = <&power_key_irq &lid_irq>; |
| 37 |
|
| 38 |
power-key { |
| 39 |
label = "Power"; |
| 40 |
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; |
| 41 |
linux,code = <KEY_POWER>; |
| 42 |
wakeup-source; |
| 43 |
}; |
| 44 |
|
| 45 |
lid-switch { |
| 46 |
label = "Lid"; |
| 47 |
gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; |
| 48 |
linux,input-type = <5>; /* EV_SW */ |
| 49 |
linux,code = <0>; /* SW_LID */ |
| 50 |
debounce-interval = <1>; |
| 51 |
wakeup-source; |
| 52 |
}; |
| 53 |
}; |
| 54 |
|
| 55 |
vbat: vbat-fixed-regulator { |
| 56 |
compatible = "regulator-fixed"; |
| 57 |
regulator-name = "vbat-supply"; |
| 58 |
regulator-boot-on; |
| 59 |
}; |
| 60 |
|
| 61 |
i2c-arbitrator { |
| 62 |
compatible = "i2c-arb-gpio-challenge"; |
| 63 |
i2c-parent = <&i2c_4>; |
| 64 |
|
| 65 |
our-claim-gpios = <&gpf0 3 GPIO_ACTIVE_LOW>; |
| 66 |
their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; |
| 67 |
slew-delay-us = <10>; |
| 68 |
wait-retry-us = <3000>; |
| 69 |
wait-free-us = <50000>; |
| 70 |
|
| 71 |
pinctrl-names = "default"; |
| 72 |
pinctrl-0 = <&arb_our_claim &arb_their_claim>; |
| 73 |
|
| 74 |
/* Use ID 104 as a hint that we're on physical bus 4 */ |
| 75 |
i2c_104: i2c-arb { |
| 76 |
#address-cells = <1>; |
| 77 |
#size-cells = <0>; |
| 78 |
|
| 79 |
battery: sbs-battery@b { |
| 80 |
compatible = "sbs,sbs-battery"; |
| 81 |
reg = <0xb>; |
| 82 |
sbs,poll-retry-count = <1>; |
| 83 |
}; |
| 84 |
|
| 85 |
cros_ec: embedded-controller@1e { |
| 86 |
compatible = "google,cros-ec-i2c"; |
| 87 |
reg = <0x1e>; |
| 88 |
interrupts = <6 IRQ_TYPE_NONE>; |
| 89 |
interrupt-parent = <&gpx1>; |
| 90 |
pinctrl-names = "default"; |
| 91 |
pinctrl-0 = <&ec_irq>; |
| 92 |
wakeup-source; |
| 93 |
}; |
| 94 |
|
| 95 |
power-regulator@48 { |
| 96 |
compatible = "ti,tps65090"; |
| 97 |
reg = <0x48>; |
| 98 |
|
| 99 |
/* |
| 100 |
* Config irq to disable internal pulls |
| 101 |
* even though we run in polling mode. |
| 102 |
*/ |
| 103 |
pinctrl-names = "default"; |
| 104 |
pinctrl-0 = <&tps65090_irq>; |
| 105 |
|
| 106 |
vsys1-supply = <&vbat>; |
| 107 |
vsys2-supply = <&vbat>; |
| 108 |
vsys3-supply = <&vbat>; |
| 109 |
infet1-supply = <&vbat>; |
| 110 |
infet2-supply = <&vbat>; |
| 111 |
infet3-supply = <&vbat>; |
| 112 |
infet4-supply = <&vbat>; |
| 113 |
infet5-supply = <&vbat>; |
| 114 |
infet6-supply = <&vbat>; |
| 115 |
infet7-supply = <&vbat>; |
| 116 |
vsys-l1-supply = <&vbat>; |
| 117 |
vsys-l2-supply = <&vbat>; |
| 118 |
|
| 119 |
regulators { |
| 120 |
dcdc1 { |
| 121 |
ti,enable-ext-control; |
| 122 |
}; |
| 123 |
dcdc2 { |
| 124 |
ti,enable-ext-control; |
| 125 |
}; |
| 126 |
dcdc3 { |
| 127 |
ti,enable-ext-control; |
| 128 |
}; |
| 129 |
fet1: fet1 { |
| 130 |
regulator-name = "vcd_led"; |
| 131 |
ti,overcurrent-wait = <3>; |
| 132 |
}; |
| 133 |
tps65090_fet2: fet2 { |
| 134 |
regulator-name = "video_mid"; |
| 135 |
regulator-always-on; |
| 136 |
ti,overcurrent-wait = <3>; |
| 137 |
}; |
| 138 |
fet3 { |
| 139 |
regulator-name = "wwan_r"; |
| 140 |
regulator-always-on; |
| 141 |
ti,overcurrent-wait = <3>; |
| 142 |
}; |
| 143 |
fet4 { |
| 144 |
regulator-name = "sdcard"; |
| 145 |
ti,overcurrent-wait = <3>; |
| 146 |
}; |
| 147 |
fet5 { |
| 148 |
regulator-name = "camout"; |
| 149 |
regulator-always-on; |
| 150 |
ti,overcurrent-wait = <3>; |
| 151 |
}; |
| 152 |
fet6: fet6 { |
| 153 |
regulator-name = "lcd_vdd"; |
| 154 |
ti,overcurrent-wait = <3>; |
| 155 |
}; |
| 156 |
tps65090_fet7: fet7 { |
| 157 |
regulator-name = "video_mid_1a"; |
| 158 |
regulator-always-on; |
| 159 |
ti,overcurrent-wait = <3>; |
| 160 |
}; |
| 161 |
ldo1 { |
| 162 |
}; |
| 163 |
ldo2 { |
| 164 |
}; |
| 165 |
}; |
| 166 |
|
| 167 |
charger { |
| 168 |
compatible = "ti,tps65090-charger"; |
| 169 |
}; |
| 170 |
}; |
| 171 |
}; |
| 172 |
}; |
| 173 |
|
| 174 |
sound { |
| 175 |
samsung,i2s-controller = <&i2s0>; |
| 176 |
}; |
| 177 |
|
| 178 |
usb3_vbus_reg: regulator-usb3 { |
| 179 |
compatible = "regulator-fixed"; |
| 180 |
regulator-name = "P5.0V_USB3CON"; |
| 181 |
regulator-min-microvolt = <5000000>; |
| 182 |
regulator-max-microvolt = <5000000>; |
| 183 |
gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; |
| 184 |
pinctrl-names = "default"; |
| 185 |
pinctrl-0 = <&usb3_vbus_en>; |
| 186 |
enable-active-high; |
| 187 |
}; |
| 188 |
|
| 189 |
fixed-rate-clocks { |
| 190 |
xxti { |
| 191 |
compatible = "samsung,clock-xxti"; |
| 192 |
clock-frequency = <24000000>; |
| 193 |
}; |
| 194 |
}; |
| 195 |
|
| 196 |
backlight: backlight { |
| 197 |
compatible = "pwm-backlight"; |
| 198 |
pwms = <&pwm 0 1000000 0>; |
| 199 |
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; |
| 200 |
default-brightness-level = <7>; |
| 201 |
enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; |
| 202 |
power-supply = <&fet1>; |
| 203 |
pinctrl-0 = <&pwm0_out>; |
| 204 |
pinctrl-names = "default"; |
| 205 |
}; |
| 206 |
|
| 207 |
panel: panel { |
| 208 |
compatible = "auo,b116xw03"; |
| 209 |
power-supply = <&fet6>; |
| 210 |
backlight = <&backlight>; |
| 211 |
|
| 212 |
port { |
| 213 |
panel_in: endpoint { |
| 214 |
remote-endpoint = <&bridge_out>; |
| 215 |
}; |
| 216 |
}; |
| 217 |
}; |
| 218 |
|
| 219 |
mmc3_pwrseq: mmc3-pwrseq { |
| 220 |
compatible = "mmc-pwrseq-simple"; |
| 221 |
reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ |
| 222 |
<&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ |
| 223 |
clocks = <&max77686 MAX77686_CLK_PMIC>; |
| 224 |
clock-names = "ext_clock"; |
| 225 |
}; |
| 226 |
}; |
| 227 |
|
| 228 |
&clock { |
| 229 |
assigned-clocks = <&clock CLK_FOUT_EPLL>; |
| 230 |
assigned-clock-rates = <49152000>; |
| 231 |
}; |
| 232 |
|
| 233 |
&clock_audss { |
| 234 |
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; |
| 235 |
assigned-clock-parents = <&clock CLK_FOUT_EPLL>; |
| 236 |
}; |
| 237 |
|
| 238 |
&cpu0 { |
| 239 |
cpu0-supply = <&buck2_reg>; |
| 240 |
}; |
| 241 |
|
| 242 |
&dp { |
| 243 |
status = "okay"; |
| 244 |
pinctrl-names = "default"; |
| 245 |
pinctrl-0 = <&dp_hpd>; |
| 246 |
samsung,color-space = <0>; |
| 247 |
samsung,color-depth = <1>; |
| 248 |
samsung,link-rate = <0x0a>; |
| 249 |
samsung,lane-count = <2>; |
| 250 |
hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; |
| 251 |
|
| 252 |
ports { |
| 253 |
port { |
| 254 |
dp_out: endpoint { |
| 255 |
remote-endpoint = <&bridge_in>; |
| 256 |
}; |
| 257 |
}; |
| 258 |
}; |
| 259 |
}; |
| 260 |
|
| 261 |
&ehci { |
| 262 |
samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; |
| 263 |
}; |
| 264 |
|
| 265 |
&fimd { |
| 266 |
status = "okay"; |
| 267 |
samsung,invert-vclk; |
| 268 |
}; |
| 269 |
|
| 270 |
&hdmi { |
| 271 |
status = "okay"; |
| 272 |
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
| 273 |
pinctrl-names = "default"; |
| 274 |
pinctrl-0 = <&hdmi_hpd_irq>; |
| 275 |
ddc = <&i2c_2>; |
| 276 |
hdmi-en-supply = <&tps65090_fet7>; |
| 277 |
vdd-supply = <&ldo8_reg>; |
| 278 |
vdd_osc-supply = <&ldo10_reg>; |
| 279 |
vdd_pll-supply = <&ldo8_reg>; |
| 280 |
}; |
| 281 |
|
| 282 |
&hdmicec { |
| 283 |
status = "okay"; |
| 284 |
}; |
| 285 |
|
| 286 |
&i2c_0 { |
| 287 |
status = "okay"; |
| 288 |
samsung,i2c-sda-delay = <100>; |
| 289 |
samsung,i2c-max-bus-freq = <378000>; |
| 290 |
|
| 291 |
max77686: pmic@9 { |
| 292 |
compatible = "maxim,max77686"; |
| 293 |
interrupt-parent = <&gpx3>; |
| 294 |
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
| 295 |
pinctrl-names = "default"; |
| 296 |
pinctrl-0 = <&max77686_irq>; |
| 297 |
wakeup-source; |
| 298 |
reg = <0x09>; |
| 299 |
#clock-cells = <1>; |
| 300 |
|
| 301 |
voltage-regulators { |
| 302 |
ldo1_reg: LDO1 { |
| 303 |
regulator-name = "P1.0V_LDO_OUT1"; |
| 304 |
regulator-min-microvolt = <1000000>; |
| 305 |
regulator-max-microvolt = <1000000>; |
| 306 |
regulator-always-on; |
| 307 |
}; |
| 308 |
|
| 309 |
ldo2_reg: LDO2 { |
| 310 |
regulator-name = "P1.8V_LDO_OUT2"; |
| 311 |
regulator-min-microvolt = <1800000>; |
| 312 |
regulator-max-microvolt = <1800000>; |
| 313 |
regulator-always-on; |
| 314 |
}; |
| 315 |
|
| 316 |
ldo3_reg: LDO3 { |
| 317 |
regulator-name = "P1.8V_LDO_OUT3"; |
| 318 |
regulator-min-microvolt = <1800000>; |
| 319 |
regulator-max-microvolt = <1800000>; |
| 320 |
regulator-always-on; |
| 321 |
}; |
| 322 |
|
| 323 |
ldo7_reg: LDO7 { |
| 324 |
regulator-name = "P1.1V_LDO_OUT7"; |
| 325 |
regulator-min-microvolt = <1100000>; |
| 326 |
regulator-max-microvolt = <1100000>; |
| 327 |
regulator-always-on; |
| 328 |
}; |
| 329 |
|
| 330 |
ldo8_reg: LDO8 { |
| 331 |
regulator-name = "P1.0V_LDO_OUT8"; |
| 332 |
regulator-min-microvolt = <1000000>; |
| 333 |
regulator-max-microvolt = <1000000>; |
| 334 |
regulator-always-on; |
| 335 |
}; |
| 336 |
|
| 337 |
ldo10_reg: LDO10 { |
| 338 |
regulator-name = "P1.8V_LDO_OUT10"; |
| 339 |
regulator-min-microvolt = <1800000>; |
| 340 |
regulator-max-microvolt = <1800000>; |
| 341 |
regulator-always-on; |
| 342 |
}; |
| 343 |
|
| 344 |
ldo12_reg: LDO12 { |
| 345 |
regulator-name = "P3.0V_LDO_OUT12"; |
| 346 |
regulator-min-microvolt = <3000000>; |
| 347 |
regulator-max-microvolt = <3000000>; |
| 348 |
regulator-always-on; |
| 349 |
}; |
| 350 |
|
| 351 |
ldo14_reg: LDO14 { |
| 352 |
regulator-name = "P1.8V_LDO_OUT14"; |
| 353 |
regulator-min-microvolt = <1800000>; |
| 354 |
regulator-max-microvolt = <1800000>; |
| 355 |
regulator-always-on; |
| 356 |
}; |
| 357 |
|
| 358 |
ldo15_reg: LDO15 { |
| 359 |
regulator-name = "P1.0V_LDO_OUT15"; |
| 360 |
regulator-min-microvolt = <1000000>; |
| 361 |
regulator-max-microvolt = <1000000>; |
| 362 |
regulator-always-on; |
| 363 |
}; |
| 364 |
|
| 365 |
ldo16_reg: LDO16 { |
| 366 |
regulator-name = "P1.8V_LDO_OUT16"; |
| 367 |
regulator-min-microvolt = <1800000>; |
| 368 |
regulator-max-microvolt = <1800000>; |
| 369 |
regulator-always-on; |
| 370 |
}; |
| 371 |
|
| 372 |
buck1_reg: BUCK1 { |
| 373 |
regulator-name = "vdd_mif"; |
| 374 |
regulator-min-microvolt = <950000>; |
| 375 |
regulator-max-microvolt = <1300000>; |
| 376 |
regulator-always-on; |
| 377 |
regulator-boot-on; |
| 378 |
}; |
| 379 |
|
| 380 |
buck2_reg: BUCK2 { |
| 381 |
regulator-name = "vdd_arm"; |
| 382 |
regulator-min-microvolt = <850000>; |
| 383 |
regulator-max-microvolt = <1350000>; |
| 384 |
regulator-always-on; |
| 385 |
regulator-boot-on; |
| 386 |
}; |
| 387 |
|
| 388 |
buck3_reg: BUCK3 { |
| 389 |
regulator-name = "vdd_int"; |
| 390 |
regulator-min-microvolt = <900000>; |
| 391 |
regulator-max-microvolt = <1200000>; |
| 392 |
regulator-always-on; |
| 393 |
regulator-boot-on; |
| 394 |
}; |
| 395 |
|
| 396 |
buck4_reg: BUCK4 { |
| 397 |
regulator-name = "vdd_g3d"; |
| 398 |
regulator-min-microvolt = <850000>; |
| 399 |
regulator-max-microvolt = <1300000>; |
| 400 |
regulator-always-on; |
| 401 |
regulator-boot-on; |
| 402 |
}; |
| 403 |
|
| 404 |
buck5_reg: BUCK5 { |
| 405 |
regulator-name = "P1.8V_BUCK_OUT5"; |
| 406 |
regulator-min-microvolt = <1800000>; |
| 407 |
regulator-max-microvolt = <1800000>; |
| 408 |
regulator-always-on; |
| 409 |
regulator-boot-on; |
| 410 |
}; |
| 411 |
|
| 412 |
buck6_reg: BUCK6 { |
| 413 |
regulator-name = "P1.35V_BUCK_OUT6"; |
| 414 |
regulator-min-microvolt = <1350000>; |
| 415 |
regulator-max-microvolt = <1350000>; |
| 416 |
regulator-always-on; |
| 417 |
}; |
| 418 |
|
| 419 |
buck7_reg: BUCK7 { |
| 420 |
regulator-name = "P2.0V_BUCK_OUT7"; |
| 421 |
regulator-min-microvolt = <2000000>; |
| 422 |
regulator-max-microvolt = <2000000>; |
| 423 |
regulator-always-on; |
| 424 |
}; |
| 425 |
|
| 426 |
buck8_reg: BUCK8 { |
| 427 |
regulator-name = "P2.85V_BUCK_OUT8"; |
| 428 |
regulator-min-microvolt = <2850000>; |
| 429 |
regulator-max-microvolt = <2850000>; |
| 430 |
regulator-always-on; |
| 431 |
}; |
| 432 |
}; |
| 433 |
}; |
| 434 |
}; |
| 435 |
|
| 436 |
&i2c_1 { |
| 437 |
status = "okay"; |
| 438 |
samsung,i2c-sda-delay = <100>; |
| 439 |
samsung,i2c-max-bus-freq = <378000>; |
| 440 |
|
| 441 |
trackpad@67 { |
| 442 |
reg = <0x67>; |
| 443 |
compatible = "cypress,cyapa"; |
| 444 |
interrupts = <2 IRQ_TYPE_NONE>; |
| 445 |
interrupt-parent = <&gpx1>; |
| 446 |
wakeup-source; |
| 447 |
}; |
| 448 |
}; |
| 449 |
|
| 450 |
/* |
| 451 |
* Disabled pullups since external part has its own pullups and |
| 452 |
* double-pulling gets us out of spec in some cases. |
| 453 |
*/ |
| 454 |
&i2c2_bus { |
| 455 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 456 |
}; |
| 457 |
|
| 458 |
&i2c_2 { |
| 459 |
status = "okay"; |
| 460 |
/* used by HDMI DDC */ |
| 461 |
samsung,i2c-sda-delay = <100>; |
| 462 |
samsung,i2c-max-bus-freq = <66000>; |
| 463 |
}; |
| 464 |
|
| 465 |
&i2c_3 { |
| 466 |
status = "okay"; |
| 467 |
samsung,i2c-sda-delay = <100>; |
| 468 |
samsung,i2c-max-bus-freq = <66000>; |
| 469 |
}; |
| 470 |
|
| 471 |
&i2c_4 { |
| 472 |
status = "okay"; |
| 473 |
samsung,i2c-sda-delay = <100>; |
| 474 |
samsung,i2c-max-bus-freq = <66000>; |
| 475 |
}; |
| 476 |
|
| 477 |
&i2c_5 { |
| 478 |
status = "okay"; |
| 479 |
samsung,i2c-sda-delay = <100>; |
| 480 |
samsung,i2c-max-bus-freq = <66000>; |
| 481 |
}; |
| 482 |
|
| 483 |
&i2c_7 { |
| 484 |
status = "okay"; |
| 485 |
samsung,i2c-sda-delay = <100>; |
| 486 |
samsung,i2c-max-bus-freq = <66000>; |
| 487 |
|
| 488 |
ptn3460: lvds-bridge@20 { |
| 489 |
compatible = "nxp,ptn3460"; |
| 490 |
reg = <0x20>; |
| 491 |
powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; |
| 492 |
reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; |
| 493 |
edid-emulation = <5>; |
| 494 |
|
| 495 |
ports { |
| 496 |
#address-cells = <1>; |
| 497 |
#size-cells = <0>; |
| 498 |
|
| 499 |
port@0 { |
| 500 |
reg = <0>; |
| 501 |
|
| 502 |
bridge_out: endpoint { |
| 503 |
remote-endpoint = <&panel_in>; |
| 504 |
}; |
| 505 |
}; |
| 506 |
|
| 507 |
port@1 { |
| 508 |
reg = <1>; |
| 509 |
|
| 510 |
bridge_in: endpoint { |
| 511 |
remote-endpoint = <&dp_out>; |
| 512 |
}; |
| 513 |
}; |
| 514 |
}; |
| 515 |
}; |
| 516 |
}; |
| 517 |
|
| 518 |
&i2c_8 { |
| 519 |
status = "okay"; |
| 520 |
/* used by HDMI PHY */ |
| 521 |
samsung,i2c-sda-delay = <100>; |
| 522 |
samsung,i2c-max-bus-freq = <378000>; |
| 523 |
}; |
| 524 |
|
| 525 |
&i2s0 { |
| 526 |
assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; |
| 527 |
assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; |
| 528 |
status = "okay"; |
| 529 |
}; |
| 530 |
|
| 531 |
&mali { |
| 532 |
mali-supply = <&buck4_reg>; |
| 533 |
status = "okay"; |
| 534 |
}; |
| 535 |
|
| 536 |
&mixer { |
| 537 |
status = "okay"; |
| 538 |
}; |
| 539 |
|
| 540 |
/* eMMC flash */ |
| 541 |
&mmc_0 { |
| 542 |
status = "okay"; |
| 543 |
non-removable; |
| 544 |
samsung,dw-mshc-ciu-div = <3>; |
| 545 |
samsung,dw-mshc-sdr-timing = <2 3>; |
| 546 |
samsung,dw-mshc-ddr-timing = <1 2>; |
| 547 |
pinctrl-names = "default"; |
| 548 |
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; |
| 549 |
bus-width = <8>; |
| 550 |
cap-mmc-highspeed; |
| 551 |
mmc-ddr-1_8v; |
| 552 |
}; |
| 553 |
|
| 554 |
/* uSD card */ |
| 555 |
&mmc_2 { |
| 556 |
status = "okay"; |
| 557 |
card-detect-delay = <200>; |
| 558 |
samsung,dw-mshc-ciu-div = <3>; |
| 559 |
samsung,dw-mshc-sdr-timing = <2 3>; |
| 560 |
samsung,dw-mshc-ddr-timing = <1 2>; |
| 561 |
pinctrl-names = "default"; |
| 562 |
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; |
| 563 |
bus-width = <4>; |
| 564 |
wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>; |
| 565 |
cap-sd-highspeed; |
| 566 |
}; |
| 567 |
|
| 568 |
/* |
| 569 |
* On Snow we've got SIP WiFi and so can keep drive strengths low to |
| 570 |
* reduce EMI. |
| 571 |
* |
| 572 |
* WiFi SDIO module |
| 573 |
*/ |
| 574 |
&mmc_3 { |
| 575 |
status = "okay"; |
| 576 |
non-removable; |
| 577 |
cap-sdio-irq; |
| 578 |
keep-power-in-suspend; |
| 579 |
samsung,dw-mshc-ciu-div = <3>; |
| 580 |
samsung,dw-mshc-sdr-timing = <2 3>; |
| 581 |
samsung,dw-mshc-ddr-timing = <1 2>; |
| 582 |
pinctrl-names = "default"; |
| 583 |
pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>; |
| 584 |
bus-width = <4>; |
| 585 |
cap-sd-highspeed; |
| 586 |
mmc-pwrseq = <&mmc3_pwrseq>; |
| 587 |
}; |
| 588 |
|
| 589 |
&pinctrl_0 { |
| 590 |
wifi_en: wifi-en-pins { |
| 591 |
samsung,pins = "gpx0-1"; |
| 592 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 593 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 594 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 595 |
}; |
| 596 |
|
| 597 |
wifi_rst: wifi-rst-pins { |
| 598 |
samsung,pins = "gpx0-2"; |
| 599 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 600 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 601 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 602 |
}; |
| 603 |
|
| 604 |
power_key_irq: power-key-irq-pins { |
| 605 |
samsung,pins = "gpx1-3"; |
| 606 |
samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
| 607 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 608 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 609 |
}; |
| 610 |
|
| 611 |
ec_irq: ec-irq-pins { |
| 612 |
samsung,pins = "gpx1-6"; |
| 613 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 614 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 615 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 616 |
}; |
| 617 |
|
| 618 |
tps65090_irq: tps65090-irq-pins { |
| 619 |
samsung,pins = "gpx2-6"; |
| 620 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 621 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 622 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 623 |
}; |
| 624 |
|
| 625 |
usb3_vbus_en: usb3-vbus-en-pins { |
| 626 |
samsung,pins = "gpx2-7"; |
| 627 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 628 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 629 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 630 |
}; |
| 631 |
|
| 632 |
max77686_irq: max77686-irq-pins { |
| 633 |
samsung,pins = "gpx3-2"; |
| 634 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 635 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 636 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 637 |
}; |
| 638 |
|
| 639 |
lid_irq: lid-irq-pins { |
| 640 |
samsung,pins = "gpx3-5"; |
| 641 |
samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
| 642 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 643 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 644 |
}; |
| 645 |
|
| 646 |
hdmi_hpd_irq: hdmi-hpd-irq-pins { |
| 647 |
samsung,pins = "gpx3-7"; |
| 648 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 649 |
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| 650 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 651 |
}; |
| 652 |
}; |
| 653 |
|
| 654 |
&pinctrl_1 { |
| 655 |
arb_their_claim: arb-their-claim-pins { |
| 656 |
samsung,pins = "gpe0-4"; |
| 657 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 658 |
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| 659 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 660 |
}; |
| 661 |
|
| 662 |
arb_our_claim: arb-our-claim-pins { |
| 663 |
samsung,pins = "gpf0-3"; |
| 664 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 665 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 666 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 667 |
}; |
| 668 |
}; |
| 669 |
|
| 670 |
&pmu_system_controller { |
| 671 |
assigned-clocks = <&pmu_system_controller 0>; |
| 672 |
assigned-clock-parents = <&clock CLK_FIN_PLL>; |
| 673 |
}; |
| 674 |
|
| 675 |
&rtc { |
| 676 |
status = "okay"; |
| 677 |
clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; |
| 678 |
clock-names = "rtc", "rtc_src"; |
| 679 |
}; |
| 680 |
|
| 681 |
&sd3_bus4 { |
| 682 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 683 |
}; |
| 684 |
|
| 685 |
&sd3_clk { |
| 686 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 687 |
}; |
| 688 |
|
| 689 |
&sd3_cmd { |
| 690 |
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| 691 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 692 |
}; |
| 693 |
|
| 694 |
&spi_1 { |
| 695 |
status = "okay"; |
| 696 |
samsung,spi-src-clk = <0>; |
| 697 |
num-cs = <1>; |
| 698 |
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; |
| 699 |
}; |
| 700 |
|
| 701 |
&usbdrd { |
| 702 |
vdd10-supply = <&ldo15_reg>; |
| 703 |
vdd33-supply = <&ldo12_reg>; |
| 704 |
}; |
| 705 |
|
| 706 |
&usbdrd_dwc3 { |
| 707 |
dr_mode = "host"; |
| 708 |
}; |
| 709 |
|
| 710 |
&usbdrd_phy { |
| 711 |
vbus-supply = <&usb3_vbus_reg>; |
| 712 |
}; |
| 713 |
|
| 714 |
#include "../cros-ec-keyboard.dtsi" |