| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Google Spring board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2013 Google, Inc |
| 6 |
* Copyright (c) 2014 SUSE LINUX Products GmbH |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
#include <dt-bindings/clock/samsung,s2mps11.h> |
| 11 |
#include <dt-bindings/gpio/gpio.h> |
| 12 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 13 |
#include <dt-bindings/input/input.h> |
| 14 |
#include "exynos5250.dtsi" |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Google Spring"; |
| 18 |
compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5"; |
| 19 |
chassis-type = "laptop"; |
| 20 |
|
| 21 |
memory@40000000 { |
| 22 |
device_type = "memory"; |
| 23 |
reg = <0x40000000 0x80000000>; |
| 24 |
}; |
| 25 |
|
| 26 |
aliases { |
| 27 |
mmc0 = &mmc_0; |
| 28 |
mmc1 = &mmc_1; |
| 29 |
}; |
| 30 |
|
| 31 |
chosen { |
| 32 |
bootargs = "console=tty1"; |
| 33 |
stdout-path = "serial3:115200n8"; |
| 34 |
}; |
| 35 |
|
| 36 |
gpio-keys { |
| 37 |
compatible = "gpio-keys"; |
| 38 |
pinctrl-names = "default"; |
| 39 |
pinctrl-0 = <&power_key_irq>, <&lid_irq>; |
| 40 |
|
| 41 |
power-key { |
| 42 |
label = "Power"; |
| 43 |
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; |
| 44 |
linux,code = <KEY_POWER>; |
| 45 |
wakeup-source; |
| 46 |
}; |
| 47 |
|
| 48 |
lid-switch { |
| 49 |
label = "Lid"; |
| 50 |
gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; |
| 51 |
linux,input-type = <5>; /* EV_SW */ |
| 52 |
linux,code = <0>; /* SW_LID */ |
| 53 |
debounce-interval = <1>; |
| 54 |
wakeup-source; |
| 55 |
}; |
| 56 |
}; |
| 57 |
|
| 58 |
usb-hub { |
| 59 |
compatible = "smsc,usb3503a"; |
| 60 |
reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>; |
| 61 |
pinctrl-names = "default"; |
| 62 |
pinctrl-0 = <&hsic_reset>; |
| 63 |
}; |
| 64 |
|
| 65 |
fixed-rate-clocks { |
| 66 |
xxti { |
| 67 |
compatible = "samsung,clock-xxti"; |
| 68 |
clock-frequency = <24000000>; |
| 69 |
}; |
| 70 |
}; |
| 71 |
}; |
| 72 |
|
| 73 |
&cpu0 { |
| 74 |
cpu0-supply = <&buck2_reg>; |
| 75 |
}; |
| 76 |
|
| 77 |
&dp { |
| 78 |
status = "okay"; |
| 79 |
pinctrl-names = "default"; |
| 80 |
pinctrl-0 = <&dp_hpd_gpio>; |
| 81 |
samsung,color-space = <0>; |
| 82 |
samsung,color-depth = <1>; |
| 83 |
samsung,link-rate = <0x0a>; |
| 84 |
samsung,lane-count = <1>; |
| 85 |
hpd-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>; |
| 86 |
}; |
| 87 |
|
| 88 |
&ehci { |
| 89 |
samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; |
| 90 |
}; |
| 91 |
|
| 92 |
&fimd { |
| 93 |
status = "okay"; |
| 94 |
samsung,invert-vclk; |
| 95 |
}; |
| 96 |
|
| 97 |
&hdmi { |
| 98 |
status = "okay"; |
| 99 |
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
| 100 |
pinctrl-names = "default"; |
| 101 |
pinctrl-0 = <&hdmi_hpd_irq>; |
| 102 |
ddc = <&i2c_2>; |
| 103 |
hdmi-en-supply = <&ldo8_reg>; |
| 104 |
vdd-supply = <&ldo8_reg>; |
| 105 |
vdd_osc-supply = <&ldo10_reg>; |
| 106 |
vdd_pll-supply = <&ldo8_reg>; |
| 107 |
}; |
| 108 |
|
| 109 |
&i2c_0 { |
| 110 |
status = "okay"; |
| 111 |
samsung,i2c-sda-delay = <100>; |
| 112 |
samsung,i2c-max-bus-freq = <378000>; |
| 113 |
|
| 114 |
pmic@66 { |
| 115 |
compatible = "samsung,s5m8767-pmic"; |
| 116 |
reg = <0x66>; |
| 117 |
interrupt-parent = <&gpx3>; |
| 118 |
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
| 119 |
pinctrl-names = "default"; |
| 120 |
pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>; |
| 121 |
wakeup-source; |
| 122 |
|
| 123 |
s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */ |
| 124 |
<&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */ |
| 125 |
<&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */ |
| 126 |
|
| 127 |
s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */ |
| 128 |
<&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */ |
| 129 |
<&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */ |
| 130 |
|
| 131 |
/* |
| 132 |
* The following arrays of DVS voltages are not used, since we are |
| 133 |
* not using GPIOs to control PMIC bucks, but they must be defined |
| 134 |
* to please the driver. |
| 135 |
*/ |
| 136 |
s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, |
| 137 |
<1250000>, <1200000>, |
| 138 |
<1150000>, <1100000>, |
| 139 |
<1000000>, <950000>; |
| 140 |
|
| 141 |
s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, |
| 142 |
<1100000>, <1100000>, |
| 143 |
<1000000>, <1000000>, |
| 144 |
<1000000>, <1000000>; |
| 145 |
|
| 146 |
s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, |
| 147 |
<1200000>, <1200000>, |
| 148 |
<1200000>, <1200000>, |
| 149 |
<1200000>, <1200000>; |
| 150 |
|
| 151 |
s5m8767_osc: clocks { |
| 152 |
compatible = "samsung,s5m8767-clk"; |
| 153 |
#clock-cells = <1>; |
| 154 |
clock-output-names = "en32khz_ap", |
| 155 |
"en32khz_cp", |
| 156 |
"en32khz_bt"; |
| 157 |
}; |
| 158 |
|
| 159 |
regulators { |
| 160 |
ldo4_reg: LDO4 { |
| 161 |
regulator-name = "P1.0V_LDO_OUT4"; |
| 162 |
regulator-min-microvolt = <1000000>; |
| 163 |
regulator-max-microvolt = <1000000>; |
| 164 |
regulator-always-on; |
| 165 |
op_mode = <0>; |
| 166 |
}; |
| 167 |
|
| 168 |
ldo5_reg: LDO5 { |
| 169 |
regulator-name = "P1.0V_LDO_OUT5"; |
| 170 |
regulator-min-microvolt = <1000000>; |
| 171 |
regulator-max-microvolt = <1000000>; |
| 172 |
regulator-always-on; |
| 173 |
op_mode = <0>; |
| 174 |
}; |
| 175 |
|
| 176 |
ldo6_reg: LDO6 { |
| 177 |
regulator-name = "vdd_mydp"; |
| 178 |
regulator-min-microvolt = <1000000>; |
| 179 |
regulator-max-microvolt = <1000000>; |
| 180 |
regulator-always-on; |
| 181 |
op_mode = <3>; |
| 182 |
}; |
| 183 |
|
| 184 |
ldo7_reg: LDO7 { |
| 185 |
regulator-name = "P1.1V_LDO_OUT7"; |
| 186 |
regulator-min-microvolt = <1100000>; |
| 187 |
regulator-max-microvolt = <1100000>; |
| 188 |
regulator-always-on; |
| 189 |
op_mode = <3>; |
| 190 |
}; |
| 191 |
|
| 192 |
ldo8_reg: LDO8 { |
| 193 |
regulator-name = "P1.0V_LDO_OUT8"; |
| 194 |
regulator-min-microvolt = <1000000>; |
| 195 |
regulator-max-microvolt = <1000000>; |
| 196 |
regulator-always-on; |
| 197 |
op_mode = <3>; |
| 198 |
}; |
| 199 |
|
| 200 |
ldo10_reg: LDO10 { |
| 201 |
regulator-name = "P1.8V_LDO_OUT10"; |
| 202 |
regulator-min-microvolt = <1800000>; |
| 203 |
regulator-max-microvolt = <1800000>; |
| 204 |
regulator-always-on; |
| 205 |
op_mode = <3>; |
| 206 |
}; |
| 207 |
|
| 208 |
ldo11_reg: LDO11 { |
| 209 |
regulator-name = "P1.8V_LDO_OUT11"; |
| 210 |
regulator-min-microvolt = <1800000>; |
| 211 |
regulator-max-microvolt = <1800000>; |
| 212 |
regulator-always-on; |
| 213 |
op_mode = <0>; |
| 214 |
}; |
| 215 |
|
| 216 |
ldo12_reg: LDO12 { |
| 217 |
regulator-name = "P3.0V_LDO_OUT12"; |
| 218 |
regulator-min-microvolt = <3000000>; |
| 219 |
regulator-max-microvolt = <3000000>; |
| 220 |
regulator-always-on; |
| 221 |
op_mode = <3>; |
| 222 |
}; |
| 223 |
|
| 224 |
ldo13_reg: LDO13 { |
| 225 |
regulator-name = "P1.8V_LDO_OUT13"; |
| 226 |
regulator-min-microvolt = <1800000>; |
| 227 |
regulator-max-microvolt = <1800000>; |
| 228 |
regulator-always-on; |
| 229 |
op_mode = <0>; |
| 230 |
}; |
| 231 |
|
| 232 |
ldo14_reg: LDO14 { |
| 233 |
regulator-name = "P1.8V_LDO_OUT14"; |
| 234 |
regulator-min-microvolt = <1800000>; |
| 235 |
regulator-max-microvolt = <1800000>; |
| 236 |
regulator-always-on; |
| 237 |
op_mode = <3>; |
| 238 |
}; |
| 239 |
|
| 240 |
ldo15_reg: LDO15 { |
| 241 |
regulator-name = "P1.0V_LDO_OUT15"; |
| 242 |
regulator-min-microvolt = <1000000>; |
| 243 |
regulator-max-microvolt = <1000000>; |
| 244 |
regulator-always-on; |
| 245 |
op_mode = <3>; |
| 246 |
}; |
| 247 |
|
| 248 |
ldo16_reg: LDO16 { |
| 249 |
regulator-name = "P1.8V_LDO_OUT16"; |
| 250 |
regulator-min-microvolt = <1800000>; |
| 251 |
regulator-max-microvolt = <1800000>; |
| 252 |
regulator-always-on; |
| 253 |
op_mode = <3>; |
| 254 |
}; |
| 255 |
|
| 256 |
ldo17_reg: LDO17 { |
| 257 |
regulator-name = "P2.8V_LDO_OUT17"; |
| 258 |
regulator-min-microvolt = <2800000>; |
| 259 |
regulator-max-microvolt = <2800000>; |
| 260 |
regulator-always-on; |
| 261 |
op_mode = <0>; |
| 262 |
}; |
| 263 |
|
| 264 |
ldo25_reg: LDO25 { |
| 265 |
regulator-name = "vdd_bridge"; |
| 266 |
regulator-min-microvolt = <1200000>; |
| 267 |
regulator-max-microvolt = <1200000>; |
| 268 |
regulator-always-on; |
| 269 |
op_mode = <1>; |
| 270 |
}; |
| 271 |
|
| 272 |
buck1_reg: BUCK1 { |
| 273 |
regulator-name = "vdd_mif"; |
| 274 |
regulator-min-microvolt = <950000>; |
| 275 |
regulator-max-microvolt = <1300000>; |
| 276 |
regulator-always-on; |
| 277 |
regulator-boot-on; |
| 278 |
op_mode = <3>; |
| 279 |
}; |
| 280 |
|
| 281 |
buck2_reg: BUCK2 { |
| 282 |
regulator-name = "vdd_arm"; |
| 283 |
regulator-min-microvolt = <850000>; |
| 284 |
regulator-max-microvolt = <1350000>; |
| 285 |
regulator-always-on; |
| 286 |
regulator-boot-on; |
| 287 |
op_mode = <3>; |
| 288 |
}; |
| 289 |
|
| 290 |
buck3_reg: BUCK3 { |
| 291 |
regulator-name = "vdd_int"; |
| 292 |
regulator-min-microvolt = <900000>; |
| 293 |
regulator-max-microvolt = <1200000>; |
| 294 |
regulator-always-on; |
| 295 |
regulator-boot-on; |
| 296 |
op_mode = <3>; |
| 297 |
}; |
| 298 |
|
| 299 |
buck4_reg: BUCK4 { |
| 300 |
regulator-name = "vdd_g3d"; |
| 301 |
regulator-min-microvolt = <850000>; |
| 302 |
regulator-max-microvolt = <1300000>; |
| 303 |
regulator-boot-on; |
| 304 |
op_mode = <3>; |
| 305 |
}; |
| 306 |
|
| 307 |
buck5_reg: BUCK5 { |
| 308 |
regulator-name = "P1.8V_BUCK_OUT5"; |
| 309 |
regulator-min-microvolt = <1800000>; |
| 310 |
regulator-max-microvolt = <1800000>; |
| 311 |
regulator-always-on; |
| 312 |
regulator-boot-on; |
| 313 |
op_mode = <1>; |
| 314 |
}; |
| 315 |
|
| 316 |
buck6_reg: BUCK6 { |
| 317 |
regulator-name = "P1.2V_BUCK_OUT6"; |
| 318 |
regulator-min-microvolt = <1200000>; |
| 319 |
regulator-max-microvolt = <1200000>; |
| 320 |
regulator-always-on; |
| 321 |
regulator-boot-on; |
| 322 |
op_mode = <0>; |
| 323 |
}; |
| 324 |
|
| 325 |
buck9_reg: BUCK9 { |
| 326 |
regulator-name = "vdd_ummc"; |
| 327 |
regulator-min-microvolt = <950000>; |
| 328 |
regulator-max-microvolt = <3000000>; |
| 329 |
regulator-always-on; |
| 330 |
regulator-boot-on; |
| 331 |
op_mode = <3>; |
| 332 |
}; |
| 333 |
}; |
| 334 |
}; |
| 335 |
}; |
| 336 |
|
| 337 |
&i2c_1 { |
| 338 |
status = "okay"; |
| 339 |
samsung,i2c-sda-delay = <100>; |
| 340 |
samsung,i2c-max-bus-freq = <378000>; |
| 341 |
|
| 342 |
trackpad@4b { |
| 343 |
compatible = "atmel,maxtouch"; |
| 344 |
reg = <0x4b>; |
| 345 |
interrupt-parent = <&gpx1>; |
| 346 |
interrupts = <2 IRQ_TYPE_EDGE_FALLING>; |
| 347 |
pinctrl-names = "default"; |
| 348 |
pinctrl-0 = <&trackpad_irq>; |
| 349 |
linux,gpio-keymap = <KEY_RESERVED |
| 350 |
KEY_RESERVED |
| 351 |
KEY_RESERVED |
| 352 |
KEY_RESERVED |
| 353 |
KEY_RESERVED |
| 354 |
BTN_LEFT>; |
| 355 |
wakeup-source; |
| 356 |
}; |
| 357 |
}; |
| 358 |
|
| 359 |
/* |
| 360 |
* Disabled pullups since external part has its own pullups and |
| 361 |
* double-pulling gets us out of spec in some cases. |
| 362 |
*/ |
| 363 |
&i2c2_bus { |
| 364 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 365 |
}; |
| 366 |
|
| 367 |
&i2c_2 { |
| 368 |
status = "okay"; |
| 369 |
/* used by HDMI DDC */ |
| 370 |
samsung,i2c-sda-delay = <100>; |
| 371 |
samsung,i2c-max-bus-freq = <66000>; |
| 372 |
}; |
| 373 |
|
| 374 |
&i2c_3 { |
| 375 |
status = "okay"; |
| 376 |
samsung,i2c-sda-delay = <100>; |
| 377 |
samsung,i2c-max-bus-freq = <66000>; |
| 378 |
}; |
| 379 |
|
| 380 |
&i2c_4 { |
| 381 |
status = "okay"; |
| 382 |
samsung,i2c-sda-delay = <100>; |
| 383 |
samsung,i2c-max-bus-freq = <66000>; |
| 384 |
|
| 385 |
cros_ec: embedded-controller@1e { |
| 386 |
compatible = "google,cros-ec-i2c"; |
| 387 |
reg = <0x1e>; |
| 388 |
interrupts = <6 IRQ_TYPE_NONE>; |
| 389 |
interrupt-parent = <&gpx1>; |
| 390 |
wakeup-source; |
| 391 |
pinctrl-names = "default"; |
| 392 |
pinctrl-0 = <&ec_irq>; |
| 393 |
}; |
| 394 |
}; |
| 395 |
|
| 396 |
&i2c_5 { |
| 397 |
status = "okay"; |
| 398 |
samsung,i2c-sda-delay = <100>; |
| 399 |
samsung,i2c-max-bus-freq = <66000>; |
| 400 |
}; |
| 401 |
|
| 402 |
&i2c_7 { |
| 403 |
status = "okay"; |
| 404 |
samsung,i2c-sda-delay = <100>; |
| 405 |
samsung,i2c-max-bus-freq = <66000>; |
| 406 |
|
| 407 |
temperature-sensor@4c { |
| 408 |
compatible = "gmt,g781"; |
| 409 |
reg = <0x4c>; |
| 410 |
}; |
| 411 |
}; |
| 412 |
|
| 413 |
&i2c_8 { |
| 414 |
status = "okay"; |
| 415 |
/* used by HDMI PHY */ |
| 416 |
samsung,i2c-sda-delay = <100>; |
| 417 |
samsung,i2c-max-bus-freq = <378000>; |
| 418 |
}; |
| 419 |
|
| 420 |
&i2s0 { |
| 421 |
status = "okay"; |
| 422 |
}; |
| 423 |
|
| 424 |
&mixer { |
| 425 |
status = "okay"; |
| 426 |
}; |
| 427 |
|
| 428 |
&mmc_0 { |
| 429 |
status = "okay"; |
| 430 |
broken-cd; |
| 431 |
card-detect-delay = <200>; |
| 432 |
samsung,dw-mshc-ciu-div = <3>; |
| 433 |
samsung,dw-mshc-sdr-timing = <2 3>; |
| 434 |
samsung,dw-mshc-ddr-timing = <1 2>; |
| 435 |
pinctrl-names = "default"; |
| 436 |
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; |
| 437 |
bus-width = <8>; |
| 438 |
cap-mmc-highspeed; |
| 439 |
mmc-ddr-1_8v; |
| 440 |
}; |
| 441 |
|
| 442 |
/* |
| 443 |
* On Spring we've got SIP WiFi and so can keep drive strengths low to |
| 444 |
* reduce EMI. |
| 445 |
*/ |
| 446 |
&mmc_1 { |
| 447 |
status = "okay"; |
| 448 |
broken-cd; |
| 449 |
card-detect-delay = <200>; |
| 450 |
samsung,dw-mshc-ciu-div = <3>; |
| 451 |
samsung,dw-mshc-sdr-timing = <2 3>; |
| 452 |
samsung,dw-mshc-ddr-timing = <1 2>; |
| 453 |
pinctrl-names = "default"; |
| 454 |
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; |
| 455 |
bus-width = <4>; |
| 456 |
cap-sd-highspeed; |
| 457 |
}; |
| 458 |
|
| 459 |
&pinctrl_0 { |
| 460 |
s5m8767_dvs: s5m8767-dvs-pins { |
| 461 |
samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2"; |
| 462 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 463 |
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| 464 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 465 |
}; |
| 466 |
|
| 467 |
dp_hpd_gpio: dp-hpd-pins { |
| 468 |
samsung,pins = "gpc3-0"; |
| 469 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 470 |
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| 471 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 472 |
}; |
| 473 |
|
| 474 |
trackpad_irq: trackpad-irq-pins { |
| 475 |
samsung,pins = "gpx1-2"; |
| 476 |
samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
| 477 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 478 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 479 |
}; |
| 480 |
|
| 481 |
power_key_irq: power-key-irq-pins { |
| 482 |
samsung,pins = "gpx1-3"; |
| 483 |
samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
| 484 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 485 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 486 |
}; |
| 487 |
|
| 488 |
ec_irq: ec-irq-pins { |
| 489 |
samsung,pins = "gpx1-6"; |
| 490 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 491 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 492 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 493 |
}; |
| 494 |
|
| 495 |
s5m8767_ds: s5m8767-ds-pins { |
| 496 |
samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5"; |
| 497 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 498 |
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| 499 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 500 |
}; |
| 501 |
|
| 502 |
s5m8767_irq: s5m8767-irq-pins { |
| 503 |
samsung,pins = "gpx3-2"; |
| 504 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 505 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 506 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 507 |
}; |
| 508 |
|
| 509 |
lid_irq: lid-irq-pins { |
| 510 |
samsung,pins = "gpx3-5"; |
| 511 |
samsung,pin-function = <EXYNOS_PIN_FUNC_F>; |
| 512 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 513 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 514 |
}; |
| 515 |
|
| 516 |
hdmi_hpd_irq: hdmi-hpd-irq-pins { |
| 517 |
samsung,pins = "gpx3-7"; |
| 518 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 519 |
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| 520 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 521 |
}; |
| 522 |
}; |
| 523 |
|
| 524 |
&pinctrl_1 { |
| 525 |
hsic_reset: hsic-reset-pins { |
| 526 |
samsung,pins = "gpe1-0"; |
| 527 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 528 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 529 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 530 |
}; |
| 531 |
}; |
| 532 |
|
| 533 |
&rtc { |
| 534 |
status = "okay"; |
| 535 |
clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; |
| 536 |
clock-names = "rtc", "rtc_src"; |
| 537 |
}; |
| 538 |
|
| 539 |
&sd1_bus4 { |
| 540 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 541 |
}; |
| 542 |
|
| 543 |
&sd1_cd { |
| 544 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 545 |
}; |
| 546 |
|
| 547 |
&sd1_clk { |
| 548 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 549 |
}; |
| 550 |
|
| 551 |
&sd1_cmd { |
| 552 |
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; |
| 553 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; |
| 554 |
}; |
| 555 |
|
| 556 |
&spi_1 { |
| 557 |
status = "okay"; |
| 558 |
samsung,spi-src-clk = <0>; |
| 559 |
num-cs = <1>; |
| 560 |
}; |
| 561 |
|
| 562 |
&usbdrd { |
| 563 |
vdd10-supply = <&ldo15_reg>; |
| 564 |
vdd33-supply = <&ldo12_reg>; |
| 565 |
}; |
| 566 |
|
| 567 |
#include "../cros-ec-keyboard.dtsi" |