| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Hardkernel's Exynos4412 based ODROID-X board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2012 Dongjin Kim <[email protected]> |
| 6 |
* |
| 7 |
* Device tree source file for Hardkernel's ODROID-X board which is based |
| 8 |
* on Samsung's Exynos4412 SoC. |
| 9 |
*/ |
| 10 |
|
| 11 |
/dts-v1/; |
| 12 |
#include <dt-bindings/leds/common.h> |
| 13 |
#include "exynos4412-odroid-common.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
model = "Hardkernel ODROID-X board based on Exynos4412"; |
| 17 |
compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4"; |
| 18 |
|
| 19 |
aliases { |
| 20 |
ethernet = ðernet; |
| 21 |
}; |
| 22 |
|
| 23 |
memory@40000000 { |
| 24 |
device_type = "memory"; |
| 25 |
reg = <0x40000000 0x3ff00000>; |
| 26 |
}; |
| 27 |
|
| 28 |
leds { |
| 29 |
compatible = "gpio-leds"; |
| 30 |
led1 { |
| 31 |
function = LED_FUNCTION_HEARTBEAT; |
| 32 |
color = <LED_COLOR_ID_BLUE>; |
| 33 |
gpios = <&gpc1 0 GPIO_ACTIVE_LOW>; |
| 34 |
default-state = "on"; |
| 35 |
linux,default-trigger = "heartbeat"; |
| 36 |
}; |
| 37 |
led2 { |
| 38 |
label = "led2:mmc0"; |
| 39 |
function = LED_FUNCTION_DISK_ACTIVITY; |
| 40 |
gpios = <&gpc1 2 GPIO_ACTIVE_LOW>; |
| 41 |
default-state = "on"; |
| 42 |
linux,default-trigger = "mmc0"; |
| 43 |
}; |
| 44 |
}; |
| 45 |
|
| 46 |
regulator-1 { |
| 47 |
compatible = "regulator-fixed"; |
| 48 |
regulator-name = "p3v3_en"; |
| 49 |
regulator-min-microvolt = <3300000>; |
| 50 |
regulator-max-microvolt = <3300000>; |
| 51 |
gpio = <&gpa1 1 GPIO_ACTIVE_HIGH>; |
| 52 |
enable-active-high; |
| 53 |
regulator-always-on; |
| 54 |
}; |
| 55 |
}; |
| 56 |
|
| 57 |
&adc { |
| 58 |
vdd-supply = <&ldo10_reg>; |
| 59 |
status = "okay"; |
| 60 |
}; |
| 61 |
|
| 62 |
/* VDDQ for MSHC (eMMC card) */ |
| 63 |
&buck8_reg { |
| 64 |
regulator-name = "BUCK8_VDDQ_MMC4_2.8V"; |
| 65 |
regulator-min-microvolt = <2800000>; |
| 66 |
regulator-max-microvolt = <2800000>; |
| 67 |
}; |
| 68 |
|
| 69 |
&ehci { |
| 70 |
#address-cells = <1>; |
| 71 |
#size-cells = <0>; |
| 72 |
phys = <&exynos_usbphy 2>; |
| 73 |
phy-names = "hsic0"; |
| 74 |
|
| 75 |
hub@2 { |
| 76 |
compatible = "usb424,3503"; |
| 77 |
reg = <2>; |
| 78 |
#address-cells = <1>; |
| 79 |
#size-cells = <0>; |
| 80 |
|
| 81 |
hub@1 { |
| 82 |
compatible = "usb424,9514"; |
| 83 |
reg = <1>; |
| 84 |
#address-cells = <1>; |
| 85 |
#size-cells = <0>; |
| 86 |
|
| 87 |
ethernet: ethernet@1 { |
| 88 |
compatible = "usb424,ec00"; |
| 89 |
reg = <1>; |
| 90 |
/* Filled in by a bootloader */ |
| 91 |
local-mac-address = [00 00 00 00 00 00]; |
| 92 |
}; |
| 93 |
}; |
| 94 |
}; |
| 95 |
}; |
| 96 |
|
| 97 |
&gpio_keys { |
| 98 |
pinctrl-0 = <&gpio_power_key &gpio_home_key>; |
| 99 |
|
| 100 |
home-key { |
| 101 |
gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; |
| 102 |
linux,code = <KEY_HOME>; |
| 103 |
label = "home key"; |
| 104 |
debounce-interval = <10>; |
| 105 |
wakeup-source; |
| 106 |
}; |
| 107 |
}; |
| 108 |
|
| 109 |
&hsotg { |
| 110 |
dr_mode = "peripheral"; |
| 111 |
}; |
| 112 |
|
| 113 |
&mshc_0 { |
| 114 |
vqmmc-supply = <&buck8_reg>; |
| 115 |
}; |
| 116 |
|
| 117 |
&pinctrl_1 { |
| 118 |
gpio_home_key: home-key-pins { |
| 119 |
samsung,pins = "gpx2-2"; |
| 120 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 121 |
}; |
| 122 |
}; |
| 123 |
|
| 124 |
&serial_2 { |
| 125 |
status = "okay"; |
| 126 |
}; |
| 127 |
|
| 128 |
&serial_3 { |
| 129 |
status = "okay"; |
| 130 |
}; |
| 131 |
|
| 132 |
&sound { |
| 133 |
model = "Odroid-X"; |
| 134 |
samsung,audio-widgets = |
| 135 |
"Headphone", "Headphone Jack", |
| 136 |
"Microphone", "Mic Jack", |
| 137 |
"Microphone", "DMIC"; |
| 138 |
audio-routing = "Headphone Jack", "HPL", |
| 139 |
"Headphone Jack", "HPR", |
| 140 |
"IN1", "Mic Jack", |
| 141 |
"Mic Jack", "MICBIAS"; |
| 142 |
}; |