| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
* Copyright (c) 2014 Collabora Ltd. |
| 8 |
* Copyright (c) 2015 Lukasz Majewski <[email protected]> |
| 9 |
* Anand Moon <[email protected]> |
| 10 |
*/ |
| 11 |
|
| 12 |
#include <dt-bindings/input/input.h> |
| 13 |
#include "exynos5422-odroid-core.dtsi" |
| 14 |
|
| 15 |
/ { |
| 16 |
aliases { |
| 17 |
mmc0 = &mmc_0; |
| 18 |
}; |
| 19 |
|
| 20 |
gpio-keys { |
| 21 |
compatible = "gpio-keys"; |
| 22 |
pinctrl-names = "default"; |
| 23 |
pinctrl-0 = <&power_key>; |
| 24 |
|
| 25 |
power-key { |
| 26 |
/* |
| 27 |
* The power button (SW2) is connected to the PWRON |
| 28 |
* pin (active high) of the S2MPS11 PMIC, which acts |
| 29 |
* as a 16ms debouce filter and signal inverter with |
| 30 |
* output on ONOB pin (active low). ONOB PMIC pin is |
| 31 |
* then connected to XEINT3 SoC pin. |
| 32 |
*/ |
| 33 |
gpios = <&gpx0 3 GPIO_ACTIVE_LOW>; |
| 34 |
linux,code = <KEY_POWER>; |
| 35 |
label = "power key"; |
| 36 |
debounce-interval = <0>; |
| 37 |
wakeup-source; |
| 38 |
}; |
| 39 |
}; |
| 40 |
|
| 41 |
emmc_pwrseq: pwrseq { |
| 42 |
pinctrl-0 = <&emmc_nrst_pin>; |
| 43 |
pinctrl-names = "default"; |
| 44 |
compatible = "mmc-pwrseq-emmc"; |
| 45 |
reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; |
| 46 |
}; |
| 47 |
|
| 48 |
fan0: pwm-fan { |
| 49 |
compatible = "pwm-fan"; |
| 50 |
pwms = <&pwm 0 20972 0>; |
| 51 |
#cooling-cells = <2>; |
| 52 |
cooling-levels = <0 130 170 230>; |
| 53 |
}; |
| 54 |
|
| 55 |
thermal-zones { |
| 56 |
cpu0_thermal: cpu0-thermal { |
| 57 |
thermal-sensors = <&tmu_cpu0>; |
| 58 |
polling-delay-passive = <0>; |
| 59 |
polling-delay = <0>; |
| 60 |
trips { |
| 61 |
cpu0_alert0: cpu-alert-0 { |
| 62 |
temperature = <50000>; /* millicelsius */ |
| 63 |
hysteresis = <5000>; /* millicelsius */ |
| 64 |
type = "active"; |
| 65 |
}; |
| 66 |
cpu0_alert1: cpu-alert-1 { |
| 67 |
temperature = <60000>; /* millicelsius */ |
| 68 |
hysteresis = <5000>; /* millicelsius */ |
| 69 |
type = "active"; |
| 70 |
}; |
| 71 |
cpu0_alert2: cpu-alert-2 { |
| 72 |
temperature = <70000>; /* millicelsius */ |
| 73 |
hysteresis = <5000>; /* millicelsius */ |
| 74 |
type = "active"; |
| 75 |
}; |
| 76 |
cpu0_crit0: cpu-crit-0 { |
| 77 |
temperature = <120000>; /* millicelsius */ |
| 78 |
hysteresis = <0>; /* millicelsius */ |
| 79 |
type = "critical"; |
| 80 |
}; |
| 81 |
cpu0_alert3: cpu-alert-3 { |
| 82 |
temperature = <70000>; /* millicelsius */ |
| 83 |
hysteresis = <10000>; /* millicelsius */ |
| 84 |
type = "passive"; |
| 85 |
}; |
| 86 |
cpu0_alert4: cpu-alert-4 { |
| 87 |
temperature = <85000>; /* millicelsius */ |
| 88 |
hysteresis = <10000>; /* millicelsius */ |
| 89 |
type = "passive"; |
| 90 |
}; |
| 91 |
}; |
| 92 |
cooling-maps { |
| 93 |
map0 { |
| 94 |
trip = <&cpu0_alert0>; |
| 95 |
cooling-device = <&fan0 0 1>; |
| 96 |
}; |
| 97 |
map1 { |
| 98 |
trip = <&cpu0_alert1>; |
| 99 |
cooling-device = <&fan0 1 2>; |
| 100 |
}; |
| 101 |
map2 { |
| 102 |
trip = <&cpu0_alert2>; |
| 103 |
cooling-device = <&fan0 2 3>; |
| 104 |
}; |
| 105 |
/* |
| 106 |
* When reaching cpu0_alert3, reduce CPU |
| 107 |
* by 2 steps. On Exynos5422/5800 that would |
| 108 |
* (usually) be: 1800 MHz and 1200 MHz. |
| 109 |
*/ |
| 110 |
map3 { |
| 111 |
trip = <&cpu0_alert3>; |
| 112 |
cooling-device = <&cpu0 0 2>, |
| 113 |
<&cpu1 0 2>, |
| 114 |
<&cpu2 0 2>, |
| 115 |
<&cpu3 0 2>, |
| 116 |
<&cpu4 0 2>, |
| 117 |
<&cpu5 0 2>, |
| 118 |
<&cpu6 0 2>, |
| 119 |
<&cpu7 0 2>; |
| 120 |
}; |
| 121 |
/* |
| 122 |
* When reaching cpu0_alert4, reduce CPU |
| 123 |
* further, down to 600 MHz (14 steps for big, |
| 124 |
* 8 steps for LITTLE). |
| 125 |
*/ |
| 126 |
cpu0_cooling_map4: map4 { |
| 127 |
trip = <&cpu0_alert4>; |
| 128 |
cooling-device = <&cpu0 3 8>, |
| 129 |
<&cpu1 3 8>, |
| 130 |
<&cpu2 3 8>, |
| 131 |
<&cpu3 3 8>, |
| 132 |
<&cpu4 3 14>, |
| 133 |
<&cpu5 3 14>, |
| 134 |
<&cpu6 3 14>, |
| 135 |
<&cpu7 3 14>; |
| 136 |
}; |
| 137 |
}; |
| 138 |
}; |
| 139 |
cpu1_thermal: cpu1-thermal { |
| 140 |
thermal-sensors = <&tmu_cpu1>; |
| 141 |
polling-delay-passive = <0>; |
| 142 |
polling-delay = <0>; |
| 143 |
trips { |
| 144 |
cpu1_alert0: cpu-alert-0 { |
| 145 |
temperature = <50000>; |
| 146 |
hysteresis = <5000>; |
| 147 |
type = "active"; |
| 148 |
}; |
| 149 |
cpu1_alert1: cpu-alert-1 { |
| 150 |
temperature = <60000>; |
| 151 |
hysteresis = <5000>; |
| 152 |
type = "active"; |
| 153 |
}; |
| 154 |
cpu1_alert2: cpu-alert-2 { |
| 155 |
temperature = <70000>; |
| 156 |
hysteresis = <5000>; |
| 157 |
type = "active"; |
| 158 |
}; |
| 159 |
cpu1_crit0: cpu-crit-0 { |
| 160 |
temperature = <120000>; |
| 161 |
hysteresis = <0>; |
| 162 |
type = "critical"; |
| 163 |
}; |
| 164 |
cpu1_alert3: cpu-alert-3 { |
| 165 |
temperature = <70000>; |
| 166 |
hysteresis = <10000>; |
| 167 |
type = "passive"; |
| 168 |
}; |
| 169 |
cpu1_alert4: cpu-alert-4 { |
| 170 |
temperature = <85000>; |
| 171 |
hysteresis = <10000>; |
| 172 |
type = "passive"; |
| 173 |
}; |
| 174 |
}; |
| 175 |
cooling-maps { |
| 176 |
map0 { |
| 177 |
trip = <&cpu1_alert0>; |
| 178 |
cooling-device = <&fan0 0 1>; |
| 179 |
}; |
| 180 |
map1 { |
| 181 |
trip = <&cpu1_alert1>; |
| 182 |
cooling-device = <&fan0 1 2>; |
| 183 |
}; |
| 184 |
map2 { |
| 185 |
trip = <&cpu1_alert2>; |
| 186 |
cooling-device = <&fan0 2 3>; |
| 187 |
}; |
| 188 |
map3 { |
| 189 |
trip = <&cpu1_alert3>; |
| 190 |
cooling-device = <&cpu0 0 2>, |
| 191 |
<&cpu1 0 2>, |
| 192 |
<&cpu2 0 2>, |
| 193 |
<&cpu3 0 2>, |
| 194 |
<&cpu4 0 2>, |
| 195 |
<&cpu5 0 2>, |
| 196 |
<&cpu6 0 2>, |
| 197 |
<&cpu7 0 2>; |
| 198 |
}; |
| 199 |
cpu1_cooling_map4: map4 { |
| 200 |
trip = <&cpu1_alert4>; |
| 201 |
cooling-device = <&cpu0 3 8>, |
| 202 |
<&cpu1 3 8>, |
| 203 |
<&cpu2 3 8>, |
| 204 |
<&cpu3 3 8>, |
| 205 |
<&cpu4 3 14>, |
| 206 |
<&cpu5 3 14>, |
| 207 |
<&cpu6 3 14>, |
| 208 |
<&cpu7 3 14>; |
| 209 |
}; |
| 210 |
}; |
| 211 |
}; |
| 212 |
cpu2_thermal: cpu2-thermal { |
| 213 |
thermal-sensors = <&tmu_cpu2>; |
| 214 |
polling-delay-passive = <0>; |
| 215 |
polling-delay = <0>; |
| 216 |
trips { |
| 217 |
cpu2_alert0: cpu-alert-0 { |
| 218 |
temperature = <50000>; |
| 219 |
hysteresis = <5000>; |
| 220 |
type = "active"; |
| 221 |
}; |
| 222 |
cpu2_alert1: cpu-alert-1 { |
| 223 |
temperature = <60000>; |
| 224 |
hysteresis = <5000>; |
| 225 |
type = "active"; |
| 226 |
}; |
| 227 |
cpu2_alert2: cpu-alert-2 { |
| 228 |
temperature = <70000>; |
| 229 |
hysteresis = <5000>; |
| 230 |
type = "active"; |
| 231 |
}; |
| 232 |
cpu2_crit0: cpu-crit-0 { |
| 233 |
temperature = <120000>; |
| 234 |
hysteresis = <0>; |
| 235 |
type = "critical"; |
| 236 |
}; |
| 237 |
cpu2_alert3: cpu-alert-3 { |
| 238 |
temperature = <70000>; |
| 239 |
hysteresis = <10000>; |
| 240 |
type = "passive"; |
| 241 |
}; |
| 242 |
cpu2_alert4: cpu-alert-4 { |
| 243 |
temperature = <85000>; |
| 244 |
hysteresis = <10000>; |
| 245 |
type = "passive"; |
| 246 |
}; |
| 247 |
}; |
| 248 |
cooling-maps { |
| 249 |
map0 { |
| 250 |
trip = <&cpu2_alert0>; |
| 251 |
cooling-device = <&fan0 0 1>; |
| 252 |
}; |
| 253 |
map1 { |
| 254 |
trip = <&cpu2_alert1>; |
| 255 |
cooling-device = <&fan0 1 2>; |
| 256 |
}; |
| 257 |
map2 { |
| 258 |
trip = <&cpu2_alert2>; |
| 259 |
cooling-device = <&fan0 2 3>; |
| 260 |
}; |
| 261 |
map3 { |
| 262 |
trip = <&cpu2_alert3>; |
| 263 |
cooling-device = <&cpu0 0 2>, |
| 264 |
<&cpu1 0 2>, |
| 265 |
<&cpu2 0 2>, |
| 266 |
<&cpu3 0 2>, |
| 267 |
<&cpu4 0 2>, |
| 268 |
<&cpu5 0 2>, |
| 269 |
<&cpu6 0 2>, |
| 270 |
<&cpu7 0 2>; |
| 271 |
}; |
| 272 |
cpu2_cooling_map4: map4 { |
| 273 |
trip = <&cpu2_alert4>; |
| 274 |
cooling-device = <&cpu0 3 8>, |
| 275 |
<&cpu1 3 8>, |
| 276 |
<&cpu2 3 8>, |
| 277 |
<&cpu3 3 8>, |
| 278 |
<&cpu4 3 14>, |
| 279 |
<&cpu5 3 14>, |
| 280 |
<&cpu6 3 14>, |
| 281 |
<&cpu7 3 14>; |
| 282 |
}; |
| 283 |
}; |
| 284 |
}; |
| 285 |
cpu3_thermal: cpu3-thermal { |
| 286 |
thermal-sensors = <&tmu_cpu3>; |
| 287 |
polling-delay-passive = <0>; |
| 288 |
polling-delay = <0>; |
| 289 |
trips { |
| 290 |
cpu3_alert0: cpu-alert-0 { |
| 291 |
temperature = <50000>; |
| 292 |
hysteresis = <5000>; |
| 293 |
type = "active"; |
| 294 |
}; |
| 295 |
cpu3_alert1: cpu-alert-1 { |
| 296 |
temperature = <60000>; |
| 297 |
hysteresis = <5000>; |
| 298 |
type = "active"; |
| 299 |
}; |
| 300 |
cpu3_alert2: cpu-alert-2 { |
| 301 |
temperature = <70000>; |
| 302 |
hysteresis = <5000>; |
| 303 |
type = "active"; |
| 304 |
}; |
| 305 |
cpu3_crit0: cpu-crit-0 { |
| 306 |
temperature = <120000>; |
| 307 |
hysteresis = <0>; |
| 308 |
type = "critical"; |
| 309 |
}; |
| 310 |
cpu3_alert3: cpu-alert-3 { |
| 311 |
temperature = <70000>; |
| 312 |
hysteresis = <10000>; |
| 313 |
type = "passive"; |
| 314 |
}; |
| 315 |
cpu3_alert4: cpu-alert-4 { |
| 316 |
temperature = <85000>; |
| 317 |
hysteresis = <10000>; |
| 318 |
type = "passive"; |
| 319 |
}; |
| 320 |
}; |
| 321 |
cooling-maps { |
| 322 |
map0 { |
| 323 |
trip = <&cpu3_alert0>; |
| 324 |
cooling-device = <&fan0 0 1>; |
| 325 |
}; |
| 326 |
map1 { |
| 327 |
trip = <&cpu3_alert1>; |
| 328 |
cooling-device = <&fan0 1 2>; |
| 329 |
}; |
| 330 |
map2 { |
| 331 |
trip = <&cpu3_alert2>; |
| 332 |
cooling-device = <&fan0 2 3>; |
| 333 |
}; |
| 334 |
map3 { |
| 335 |
trip = <&cpu3_alert3>; |
| 336 |
cooling-device = <&cpu0 0 2>, |
| 337 |
<&cpu1 0 2>, |
| 338 |
<&cpu2 0 2>, |
| 339 |
<&cpu3 0 2>, |
| 340 |
<&cpu4 0 2>, |
| 341 |
<&cpu5 0 2>, |
| 342 |
<&cpu6 0 2>, |
| 343 |
<&cpu7 0 2>; |
| 344 |
}; |
| 345 |
cpu3_cooling_map4: map4 { |
| 346 |
trip = <&cpu3_alert4>; |
| 347 |
cooling-device = <&cpu0 3 8>, |
| 348 |
<&cpu1 3 8>, |
| 349 |
<&cpu2 3 8>, |
| 350 |
<&cpu3 3 8>, |
| 351 |
<&cpu4 3 14>, |
| 352 |
<&cpu5 3 14>, |
| 353 |
<&cpu6 3 14>, |
| 354 |
<&cpu7 3 14>; |
| 355 |
}; |
| 356 |
}; |
| 357 |
}; |
| 358 |
gpu_thermal: gpu-thermal { |
| 359 |
thermal-sensors = <&tmu_gpu>; |
| 360 |
polling-delay-passive = <0>; |
| 361 |
polling-delay = <0>; |
| 362 |
trips { |
| 363 |
gpu_alert0: gpu-alert-0 { |
| 364 |
temperature = <50000>; |
| 365 |
hysteresis = <5000>; |
| 366 |
type = "active"; |
| 367 |
}; |
| 368 |
gpu_alert1: gpu-alert-1 { |
| 369 |
temperature = <60000>; |
| 370 |
hysteresis = <5000>; |
| 371 |
type = "active"; |
| 372 |
}; |
| 373 |
gpu_alert2: gpu-alert-2 { |
| 374 |
temperature = <70000>; |
| 375 |
hysteresis = <5000>; |
| 376 |
type = "active"; |
| 377 |
}; |
| 378 |
gpu_crit0: gpu-crit-0 { |
| 379 |
temperature = <120000>; |
| 380 |
hysteresis = <0>; |
| 381 |
type = "critical"; |
| 382 |
}; |
| 383 |
gpu_alert3: gpu-alert-3 { |
| 384 |
temperature = <70000>; |
| 385 |
hysteresis = <10000>; |
| 386 |
type = "passive"; |
| 387 |
}; |
| 388 |
gpu_alert4: gpu-alert-4 { |
| 389 |
temperature = <85000>; |
| 390 |
hysteresis = <10000>; |
| 391 |
type = "passive"; |
| 392 |
}; |
| 393 |
}; |
| 394 |
cooling-maps { |
| 395 |
map0 { |
| 396 |
trip = <&gpu_alert0>; |
| 397 |
cooling-device = <&fan0 0 1>; |
| 398 |
}; |
| 399 |
map1 { |
| 400 |
trip = <&gpu_alert1>; |
| 401 |
cooling-device = <&fan0 1 2>; |
| 402 |
}; |
| 403 |
map2 { |
| 404 |
trip = <&gpu_alert2>; |
| 405 |
cooling-device = <&fan0 2 3>; |
| 406 |
}; |
| 407 |
map3 { |
| 408 |
trip = <&gpu_alert3>; |
| 409 |
cooling-device = <&gpu 0 2>; |
| 410 |
}; |
| 411 |
map4 { |
| 412 |
trip = <&gpu_alert4>; |
| 413 |
cooling-device = <&gpu 3 6>; |
| 414 |
}; |
| 415 |
}; |
| 416 |
}; |
| 417 |
}; |
| 418 |
}; |
| 419 |
|
| 420 |
&buck10_reg { |
| 421 |
/* Supplies vmmc-supply of mmc_0 */ |
| 422 |
regulator-always-on; |
| 423 |
regulator-boot-on; |
| 424 |
}; |
| 425 |
|
| 426 |
&hdmi { |
| 427 |
status = "okay"; |
| 428 |
ddc = <&i2c_2>; |
| 429 |
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
| 430 |
pinctrl-names = "default"; |
| 431 |
pinctrl-0 = <&hdmi_hpd_irq>; |
| 432 |
|
| 433 |
vdd_osc-supply = <&ldo7_reg>; |
| 434 |
vdd_pll-supply = <&ldo6_reg>; |
| 435 |
vdd-supply = <&ldo6_reg>; |
| 436 |
}; |
| 437 |
|
| 438 |
&hdmicec { |
| 439 |
status = "okay"; |
| 440 |
needs-hpd; |
| 441 |
}; |
| 442 |
|
| 443 |
&i2c_2 { |
| 444 |
samsung,i2c-sda-delay = <100>; |
| 445 |
samsung,i2c-max-bus-freq = <66000>; |
| 446 |
/* used by HDMI DDC */ |
| 447 |
status = "okay"; |
| 448 |
}; |
| 449 |
|
| 450 |
&ldo26_reg { |
| 451 |
regulator-min-microvolt = <3000000>; |
| 452 |
regulator-max-microvolt = <3000000>; |
| 453 |
regulator-always-on; |
| 454 |
}; |
| 455 |
|
| 456 |
&mixer { |
| 457 |
status = "okay"; |
| 458 |
}; |
| 459 |
|
| 460 |
&mmc_0 { |
| 461 |
status = "okay"; |
| 462 |
mmc-pwrseq = <&emmc_pwrseq>; |
| 463 |
card-detect-delay = <200>; |
| 464 |
samsung,dw-mshc-ciu-div = <3>; |
| 465 |
samsung,dw-mshc-sdr-timing = <0 4>; |
| 466 |
samsung,dw-mshc-ddr-timing = <0 2>; |
| 467 |
samsung,dw-mshc-hs400-timing = <0 2>; |
| 468 |
samsung,read-strobe-delay = <90>; |
| 469 |
pinctrl-names = "default"; |
| 470 |
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; |
| 471 |
bus-width = <8>; |
| 472 |
cap-mmc-highspeed; |
| 473 |
mmc-ddr-1_8v; |
| 474 |
mmc-hs200-1_8v; |
| 475 |
mmc-hs400-1_8v; |
| 476 |
max-frequency = <200000000>; |
| 477 |
vmmc-supply = <&ldo18_reg>; |
| 478 |
vqmmc-supply = <&ldo3_reg>; |
| 479 |
}; |
| 480 |
|
| 481 |
&pinctrl_0 { |
| 482 |
power_key: power-key-pins { |
| 483 |
samsung,pins = "gpx0-3"; |
| 484 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 485 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 486 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 487 |
}; |
| 488 |
|
| 489 |
hdmi_hpd_irq: hdmi-hpd-irq-pins { |
| 490 |
samsung,pins = "gpx3-7"; |
| 491 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 492 |
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; |
| 493 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 494 |
}; |
| 495 |
}; |
| 496 |
|
| 497 |
&pinctrl_1 { |
| 498 |
emmc_nrst_pin: emmc-nrst-pins { |
| 499 |
samsung,pins = "gpd1-0"; |
| 500 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 501 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 502 |
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; |
| 503 |
}; |
| 504 |
}; |