| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung's Exynos4210 based Trats board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
* |
| 8 |
* Device tree source file for Samsung's Trats board which is based on |
| 9 |
* Samsung's Exynos4210 SoC. |
| 10 |
*/ |
| 11 |
|
| 12 |
/dts-v1/; |
| 13 |
#include "exynos4210.dtsi" |
| 14 |
#include <dt-bindings/gpio/gpio.h> |
| 15 |
|
| 16 |
/ { |
| 17 |
model = "Samsung Trats based on Exynos4210"; |
| 18 |
compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4"; |
| 19 |
chassis-type = "handset"; |
| 20 |
|
| 21 |
memory@40000000 { |
| 22 |
device_type = "memory"; |
| 23 |
reg = <0x40000000 0x10000000 |
| 24 |
0x50000000 0x10000000 |
| 25 |
0x60000000 0x10000000 |
| 26 |
0x70000000 0x10000000>; |
| 27 |
}; |
| 28 |
|
| 29 |
aliases { |
| 30 |
mmc0 = &sdhci_0; |
| 31 |
mmc1 = &sdhci_2; |
| 32 |
mmc2 = &sdhci_3; |
| 33 |
}; |
| 34 |
|
| 35 |
chosen { |
| 36 |
bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; |
| 37 |
stdout-path = "serial2:115200n8"; |
| 38 |
}; |
| 39 |
|
| 40 |
vemmc_reg: regulator-0 { |
| 41 |
compatible = "regulator-fixed"; |
| 42 |
regulator-name = "VMEM_VDD_2.8V"; |
| 43 |
regulator-min-microvolt = <2800000>; |
| 44 |
regulator-max-microvolt = <2800000>; |
| 45 |
gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; |
| 46 |
enable-active-high; |
| 47 |
}; |
| 48 |
|
| 49 |
tsp_reg: regulator-1 { |
| 50 |
compatible = "regulator-fixed"; |
| 51 |
regulator-name = "TSP_FIXED_VOLTAGES"; |
| 52 |
regulator-min-microvolt = <2800000>; |
| 53 |
regulator-max-microvolt = <2800000>; |
| 54 |
gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; |
| 55 |
enable-active-high; |
| 56 |
}; |
| 57 |
|
| 58 |
cam_af_28v_reg: regulator-2 { |
| 59 |
compatible = "regulator-fixed"; |
| 60 |
regulator-name = "8M_AF_2.8V_EN"; |
| 61 |
regulator-min-microvolt = <2800000>; |
| 62 |
regulator-max-microvolt = <2800000>; |
| 63 |
gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; |
| 64 |
enable-active-high; |
| 65 |
}; |
| 66 |
|
| 67 |
cam_io_en_reg: regulator-3 { |
| 68 |
compatible = "regulator-fixed"; |
| 69 |
regulator-name = "CAM_IO_EN"; |
| 70 |
regulator-min-microvolt = <2800000>; |
| 71 |
regulator-max-microvolt = <2800000>; |
| 72 |
gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; |
| 73 |
enable-active-high; |
| 74 |
}; |
| 75 |
|
| 76 |
cam_io_12v_reg: regulator-4 { |
| 77 |
compatible = "regulator-fixed"; |
| 78 |
regulator-name = "8M_1.2V_EN"; |
| 79 |
regulator-min-microvolt = <1200000>; |
| 80 |
regulator-max-microvolt = <1200000>; |
| 81 |
gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; |
| 82 |
enable-active-high; |
| 83 |
}; |
| 84 |
|
| 85 |
vt_core_15v_reg: regulator-5 { |
| 86 |
compatible = "regulator-fixed"; |
| 87 |
regulator-name = "VT_CORE_1.5V"; |
| 88 |
regulator-min-microvolt = <1500000>; |
| 89 |
regulator-max-microvolt = <1500000>; |
| 90 |
gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; |
| 91 |
enable-active-high; |
| 92 |
}; |
| 93 |
|
| 94 |
gpio-keys { |
| 95 |
compatible = "gpio-keys"; |
| 96 |
|
| 97 |
vol-down-key { |
| 98 |
gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; |
| 99 |
linux,code = <114>; |
| 100 |
label = "volume down"; |
| 101 |
debounce-interval = <10>; |
| 102 |
}; |
| 103 |
|
| 104 |
vol-up-key { |
| 105 |
gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; |
| 106 |
linux,code = <115>; |
| 107 |
label = "volume up"; |
| 108 |
debounce-interval = <10>; |
| 109 |
}; |
| 110 |
|
| 111 |
power-key { |
| 112 |
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; |
| 113 |
linux,code = <116>; |
| 114 |
label = "power"; |
| 115 |
debounce-interval = <10>; |
| 116 |
wakeup-source; |
| 117 |
}; |
| 118 |
|
| 119 |
ok-key { |
| 120 |
gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; |
| 121 |
linux,code = <352>; |
| 122 |
label = "ok"; |
| 123 |
debounce-interval = <10>; |
| 124 |
}; |
| 125 |
}; |
| 126 |
|
| 127 |
wlan_pwrseq: sdhci3-pwrseq { |
| 128 |
compatible = "mmc-pwrseq-simple"; |
| 129 |
reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>; |
| 130 |
}; |
| 131 |
|
| 132 |
fixed-rate-clocks { |
| 133 |
xxti { |
| 134 |
compatible = "samsung,clock-xxti"; |
| 135 |
clock-frequency = <0>; |
| 136 |
}; |
| 137 |
|
| 138 |
xusbxti { |
| 139 |
compatible = "samsung,clock-xusbxti"; |
| 140 |
clock-frequency = <24000000>; |
| 141 |
}; |
| 142 |
|
| 143 |
pmic_ap_clk: pmic-ap-clk { |
| 144 |
/* Workaround for missing clock on max8997 PMIC */ |
| 145 |
compatible = "fixed-clock"; |
| 146 |
#clock-cells = <0>; |
| 147 |
clock-frequency = <32768>; |
| 148 |
}; |
| 149 |
}; |
| 150 |
}; |
| 151 |
|
| 152 |
&camera { |
| 153 |
status = "okay"; |
| 154 |
}; |
| 155 |
|
| 156 |
&cpu0 { |
| 157 |
cpu0-supply = <&varm_breg>; |
| 158 |
}; |
| 159 |
|
| 160 |
&cpu_thermal { |
| 161 |
cooling-maps { |
| 162 |
map0 { |
| 163 |
/* Corresponds to 800MHz at freq_table */ |
| 164 |
cooling-device = <&cpu0 2 2>, <&cpu1 2 2>; |
| 165 |
}; |
| 166 |
map1 { |
| 167 |
/* Corresponds to 200MHz at freq_table */ |
| 168 |
cooling-device = <&cpu0 4 4>, <&cpu1 4 4>; |
| 169 |
}; |
| 170 |
}; |
| 171 |
}; |
| 172 |
|
| 173 |
&dsi_0 { |
| 174 |
vddcore-supply = <&vusb_reg>; |
| 175 |
vddio-supply = <&vmipi_reg>; |
| 176 |
samsung,burst-clock-frequency = <500000000>; |
| 177 |
samsung,esc-clock-frequency = <20000000>; |
| 178 |
samsung,pll-clock-frequency = <24000000>; |
| 179 |
status = "okay"; |
| 180 |
|
| 181 |
panel@0 { |
| 182 |
reg = <0>; |
| 183 |
compatible = "samsung,s6e8aa0"; |
| 184 |
vdd3-supply = <&vcclcd_reg>; |
| 185 |
vci-supply = <&vlcd_reg>; |
| 186 |
reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; |
| 187 |
power-on-delay = <50>; |
| 188 |
reset-delay = <100>; |
| 189 |
init-delay = <100>; |
| 190 |
flip-horizontal; |
| 191 |
flip-vertical; |
| 192 |
panel-width-mm = <58>; |
| 193 |
panel-height-mm = <103>; |
| 194 |
|
| 195 |
display-timings { |
| 196 |
timing-0 { |
| 197 |
clock-frequency = <57153600>; |
| 198 |
hactive = <720>; |
| 199 |
vactive = <1280>; |
| 200 |
hfront-porch = <5>; |
| 201 |
hback-porch = <5>; |
| 202 |
hsync-len = <5>; |
| 203 |
vfront-porch = <13>; |
| 204 |
vback-porch = <1>; |
| 205 |
vsync-len = <2>; |
| 206 |
}; |
| 207 |
}; |
| 208 |
}; |
| 209 |
}; |
| 210 |
|
| 211 |
&exynos_usbphy { |
| 212 |
status = "okay"; |
| 213 |
vbus-supply = <&safe1_sreg>; |
| 214 |
}; |
| 215 |
|
| 216 |
&fimc_0 { |
| 217 |
status = "okay"; |
| 218 |
assigned-clocks = <&clock CLK_MOUT_FIMC0>, |
| 219 |
<&clock CLK_SCLK_FIMC0>; |
| 220 |
assigned-clock-parents = <&clock CLK_SCLK_MPLL>; |
| 221 |
assigned-clock-rates = <0>, <160000000>; |
| 222 |
}; |
| 223 |
|
| 224 |
&fimc_1 { |
| 225 |
status = "okay"; |
| 226 |
assigned-clocks = <&clock CLK_MOUT_FIMC1>, |
| 227 |
<&clock CLK_SCLK_FIMC1>; |
| 228 |
assigned-clock-parents = <&clock CLK_SCLK_MPLL>; |
| 229 |
assigned-clock-rates = <0>, <160000000>; |
| 230 |
}; |
| 231 |
|
| 232 |
&fimc_2 { |
| 233 |
status = "okay"; |
| 234 |
assigned-clocks = <&clock CLK_MOUT_FIMC2>, |
| 235 |
<&clock CLK_SCLK_FIMC2>; |
| 236 |
assigned-clock-parents = <&clock CLK_SCLK_MPLL>; |
| 237 |
assigned-clock-rates = <0>, <160000000>; |
| 238 |
}; |
| 239 |
|
| 240 |
&fimc_3 { |
| 241 |
status = "okay"; |
| 242 |
assigned-clocks = <&clock CLK_MOUT_FIMC3>, |
| 243 |
<&clock CLK_SCLK_FIMC3>; |
| 244 |
assigned-clock-parents = <&clock CLK_SCLK_MPLL>; |
| 245 |
assigned-clock-rates = <0>, <160000000>; |
| 246 |
}; |
| 247 |
|
| 248 |
&fimd { |
| 249 |
status = "okay"; |
| 250 |
}; |
| 251 |
|
| 252 |
&gpu { |
| 253 |
status = "okay"; |
| 254 |
}; |
| 255 |
|
| 256 |
&hsotg { |
| 257 |
vusb_d-supply = <&vusb_reg>; |
| 258 |
vusb_a-supply = <&vusbdac_reg>; |
| 259 |
dr_mode = "peripheral"; |
| 260 |
status = "okay"; |
| 261 |
}; |
| 262 |
|
| 263 |
&i2c_3 { |
| 264 |
samsung,i2c-sda-delay = <100>; |
| 265 |
samsung,i2c-slave-addr = <0x10>; |
| 266 |
samsung,i2c-max-bus-freq = <400000>; |
| 267 |
pinctrl-0 = <&i2c3_bus>; |
| 268 |
pinctrl-names = "default"; |
| 269 |
status = "okay"; |
| 270 |
|
| 271 |
touchscreen@48 { |
| 272 |
compatible = "melfas,mms114"; |
| 273 |
reg = <0x48>; |
| 274 |
interrupt-parent = <&gpx0>; |
| 275 |
interrupts = <4 IRQ_TYPE_EDGE_FALLING>; |
| 276 |
touchscreen-size-x = <720>; |
| 277 |
touchscreen-size-y = <1280>; |
| 278 |
avdd-supply = <&tsp_reg>; |
| 279 |
vdd-supply = <&tsp_reg>; |
| 280 |
}; |
| 281 |
}; |
| 282 |
|
| 283 |
&i2c_5 { |
| 284 |
samsung,i2c-sda-delay = <100>; |
| 285 |
samsung,i2c-slave-addr = <0x10>; |
| 286 |
samsung,i2c-max-bus-freq = <100000>; |
| 287 |
pinctrl-0 = <&i2c5_bus>; |
| 288 |
pinctrl-names = "default"; |
| 289 |
status = "okay"; |
| 290 |
|
| 291 |
pmic@66 { |
| 292 |
compatible = "maxim,max8997-pmic"; |
| 293 |
|
| 294 |
reg = <0x66>; |
| 295 |
interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>, |
| 296 |
<&gpx2 3 IRQ_TYPE_EDGE_FALLING>; |
| 297 |
|
| 298 |
max8997,pmic-buck1-uses-gpio-dvs; |
| 299 |
max8997,pmic-buck2-uses-gpio-dvs; |
| 300 |
max8997,pmic-buck5-uses-gpio-dvs; |
| 301 |
|
| 302 |
max8997,pmic-ignore-gpiodvs-side-effect; |
| 303 |
max8997,pmic-buck125-default-dvs-idx = <0>; |
| 304 |
|
| 305 |
max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, |
| 306 |
<&gpx0 6 GPIO_ACTIVE_HIGH>, |
| 307 |
<&gpl0 0 GPIO_ACTIVE_HIGH>; |
| 308 |
|
| 309 |
max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, |
| 310 |
<1250000>, <1200000>, |
| 311 |
<1150000>, <1100000>, |
| 312 |
<1000000>, <950000>; |
| 313 |
|
| 314 |
max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, |
| 315 |
<950000>, <900000>, |
| 316 |
<1100000>, <1000000>, |
| 317 |
<950000>, <900000>; |
| 318 |
|
| 319 |
max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, |
| 320 |
<1200000>, <1200000>, |
| 321 |
<1200000>, <1200000>, |
| 322 |
<1200000>, <1200000>; |
| 323 |
|
| 324 |
regulators { |
| 325 |
valive_reg: LDO2 { |
| 326 |
regulator-name = "VALIVE_1.1V_C210"; |
| 327 |
regulator-min-microvolt = <1100000>; |
| 328 |
regulator-max-microvolt = <1100000>; |
| 329 |
regulator-always-on; |
| 330 |
}; |
| 331 |
|
| 332 |
vusb_reg: LDO3 { |
| 333 |
regulator-name = "VUSB_1.1V_C210"; |
| 334 |
regulator-min-microvolt = <1100000>; |
| 335 |
regulator-max-microvolt = <1100000>; |
| 336 |
}; |
| 337 |
|
| 338 |
vmipi_reg: LDO4 { |
| 339 |
regulator-name = "VMIPI_1.8V"; |
| 340 |
regulator-min-microvolt = <1800000>; |
| 341 |
regulator-max-microvolt = <1800000>; |
| 342 |
}; |
| 343 |
|
| 344 |
vpda_reg: LDO6 { |
| 345 |
regulator-name = "VCC_1.8V_PDA"; |
| 346 |
regulator-min-microvolt = <1800000>; |
| 347 |
regulator-max-microvolt = <1800000>; |
| 348 |
regulator-always-on; |
| 349 |
}; |
| 350 |
|
| 351 |
vcam_reg: LDO7 { |
| 352 |
regulator-name = "CAM_ISP_1.8V"; |
| 353 |
regulator-min-microvolt = <1800000>; |
| 354 |
regulator-max-microvolt = <1800000>; |
| 355 |
}; |
| 356 |
|
| 357 |
vusbdac_reg: LDO8 { |
| 358 |
regulator-name = "VUSB+VDAC_3.3V_C210"; |
| 359 |
regulator-min-microvolt = <3300000>; |
| 360 |
regulator-max-microvolt = <3300000>; |
| 361 |
}; |
| 362 |
|
| 363 |
vccpda_reg: LDO9 { |
| 364 |
regulator-name = "VCC_2.8V_PDA"; |
| 365 |
regulator-min-microvolt = <2800000>; |
| 366 |
regulator-max-microvolt = <2800000>; |
| 367 |
regulator-always-on; |
| 368 |
}; |
| 369 |
|
| 370 |
vpll_reg: LDO10 { |
| 371 |
regulator-name = "VPLL_1.1V_C210"; |
| 372 |
regulator-min-microvolt = <1100000>; |
| 373 |
regulator-max-microvolt = <1100000>; |
| 374 |
regulator-always-on; |
| 375 |
}; |
| 376 |
|
| 377 |
vtcam_reg: LDO12 { |
| 378 |
regulator-name = "VT_CAM_1.8V"; |
| 379 |
regulator-min-microvolt = <1800000>; |
| 380 |
regulator-max-microvolt = <1800000>; |
| 381 |
}; |
| 382 |
|
| 383 |
vcclcd_reg: LDO13 { |
| 384 |
regulator-name = "VCC_3.3V_LCD"; |
| 385 |
regulator-min-microvolt = <3300000>; |
| 386 |
regulator-max-microvolt = <3300000>; |
| 387 |
}; |
| 388 |
|
| 389 |
vlcd_reg: LDO15 { |
| 390 |
regulator-name = "VLCD_2.2V"; |
| 391 |
regulator-min-microvolt = <2200000>; |
| 392 |
regulator-max-microvolt = <2200000>; |
| 393 |
}; |
| 394 |
|
| 395 |
camsensor_reg: LDO16 { |
| 396 |
regulator-name = "CAM_SENSOR_IO_1.8V"; |
| 397 |
regulator-min-microvolt = <1800000>; |
| 398 |
regulator-max-microvolt = <1800000>; |
| 399 |
}; |
| 400 |
|
| 401 |
tflash_reg: LDO17 { |
| 402 |
regulator-name = "VTF_2.8V"; |
| 403 |
regulator-min-microvolt = <2800000>; |
| 404 |
regulator-max-microvolt = <2800000>; |
| 405 |
}; |
| 406 |
|
| 407 |
vddq_reg: LDO21 { |
| 408 |
regulator-name = "VDDQ_M1M2_1.2V"; |
| 409 |
regulator-min-microvolt = <1200000>; |
| 410 |
regulator-max-microvolt = <1200000>; |
| 411 |
regulator-always-on; |
| 412 |
}; |
| 413 |
|
| 414 |
varm_breg: BUCK1 { |
| 415 |
regulator-name = "VARM_1.2V_C210"; |
| 416 |
regulator-min-microvolt = <900000>; |
| 417 |
regulator-max-microvolt = <1350000>; |
| 418 |
regulator-always-on; |
| 419 |
}; |
| 420 |
|
| 421 |
vint_breg: BUCK2 { |
| 422 |
regulator-name = "VINT_1.1V_C210"; |
| 423 |
regulator-min-microvolt = <900000>; |
| 424 |
regulator-max-microvolt = <1100000>; |
| 425 |
regulator-always-on; |
| 426 |
}; |
| 427 |
|
| 428 |
camisp_breg: BUCK4 { |
| 429 |
regulator-name = "CAM_ISP_CORE_1.2V"; |
| 430 |
regulator-min-microvolt = <1200000>; |
| 431 |
regulator-max-microvolt = <1200000>; |
| 432 |
}; |
| 433 |
|
| 434 |
vmem_breg: BUCK5 { |
| 435 |
regulator-name = "VMEM_1.2V_C210"; |
| 436 |
regulator-min-microvolt = <1200000>; |
| 437 |
regulator-max-microvolt = <1200000>; |
| 438 |
regulator-always-on; |
| 439 |
}; |
| 440 |
|
| 441 |
vccsub_breg: BUCK7 { |
| 442 |
regulator-name = "VCC_SUB_2.0V"; |
| 443 |
regulator-min-microvolt = <2000000>; |
| 444 |
regulator-max-microvolt = <2000000>; |
| 445 |
regulator-always-on; |
| 446 |
}; |
| 447 |
|
| 448 |
safe1_sreg: ESAFEOUT1 { |
| 449 |
regulator-name = "SAFEOUT1"; |
| 450 |
}; |
| 451 |
|
| 452 |
safe2_sreg: ESAFEOUT2 { |
| 453 |
regulator-name = "SAFEOUT2"; |
| 454 |
regulator-boot-on; |
| 455 |
}; |
| 456 |
|
| 457 |
EN32KHZ_AP { |
| 458 |
regulator-name = "EN32KHZ_AP"; |
| 459 |
regulator-always-on; |
| 460 |
}; |
| 461 |
|
| 462 |
EN32KHZ_CP { |
| 463 |
regulator-name = "EN32KHZ_CP"; |
| 464 |
regulator-always-on; |
| 465 |
}; |
| 466 |
}; |
| 467 |
}; |
| 468 |
}; |
| 469 |
|
| 470 |
&pinctrl_1 { |
| 471 |
bt_shutdown: bt-shutdown-pins { |
| 472 |
samsung,pins = "gpl1-0"; |
| 473 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 474 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 475 |
}; |
| 476 |
|
| 477 |
bt_host_wakeup: bt-host-wakeup-pins { |
| 478 |
samsung,pins = "gpx2-6"; |
| 479 |
samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; |
| 480 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 481 |
}; |
| 482 |
|
| 483 |
bt_device_wakeup: bt-device-wakeup-pins { |
| 484 |
samsung,pins = "gpx3-1"; |
| 485 |
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; |
| 486 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 487 |
}; |
| 488 |
}; |
| 489 |
|
| 490 |
&rtc { |
| 491 |
status = "okay"; |
| 492 |
clocks = <&clock CLK_RTC>, <&pmic_ap_clk>; |
| 493 |
clock-names = "rtc", "rtc_src"; |
| 494 |
}; |
| 495 |
|
| 496 |
&sdhci_0 { |
| 497 |
bus-width = <8>; |
| 498 |
non-removable; |
| 499 |
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; |
| 500 |
pinctrl-names = "default"; |
| 501 |
vmmc-supply = <&vemmc_reg>; |
| 502 |
status = "okay"; |
| 503 |
}; |
| 504 |
|
| 505 |
&sdhci_2 { |
| 506 |
bus-width = <4>; |
| 507 |
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; |
| 508 |
pinctrl-names = "default"; |
| 509 |
vmmc-supply = <&tflash_reg>; |
| 510 |
cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; |
| 511 |
status = "okay"; |
| 512 |
}; |
| 513 |
|
| 514 |
&sdhci_3 { |
| 515 |
status = "okay"; |
| 516 |
|
| 517 |
#address-cells = <1>; |
| 518 |
#size-cells = <0>; |
| 519 |
|
| 520 |
non-removable; |
| 521 |
cap-power-off-card; |
| 522 |
bus-width = <4>; |
| 523 |
mmc-pwrseq = <&wlan_pwrseq>; |
| 524 |
vmmc-supply = <&tflash_reg>; |
| 525 |
|
| 526 |
pinctrl-names = "default"; |
| 527 |
pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>; |
| 528 |
|
| 529 |
brcmf: wifi@1 { |
| 530 |
compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac"; |
| 531 |
reg = <1>; |
| 532 |
|
| 533 |
interrupt-parent = <&gpx2>; |
| 534 |
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; |
| 535 |
interrupt-names = "host-wake"; |
| 536 |
}; |
| 537 |
}; |
| 538 |
|
| 539 |
&serial_0 { |
| 540 |
status = "okay"; |
| 541 |
pinctrl-0 = <&uart0_data &uart0_fctl>; |
| 542 |
pinctrl-names = "default"; |
| 543 |
|
| 544 |
bluetooth { |
| 545 |
compatible = "brcm,bcm4330-bt"; |
| 546 |
pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>; |
| 547 |
pinctrl-names = "default"; |
| 548 |
shutdown-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>; |
| 549 |
device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>; |
| 550 |
host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>; |
| 551 |
}; |
| 552 |
}; |
| 553 |
|
| 554 |
&serial_1 { |
| 555 |
status = "okay"; |
| 556 |
}; |
| 557 |
|
| 558 |
&serial_2 { |
| 559 |
status = "okay"; |
| 560 |
}; |
| 561 |
|
| 562 |
&serial_3 { |
| 563 |
status = "okay"; |
| 564 |
}; |
| 565 |
|
| 566 |
&tmu { |
| 567 |
status = "okay"; |
| 568 |
}; |