| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung Exynos5250 SoC device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
* |
| 8 |
* Samsung Exynos5250 SoC device nodes are listed in this file. |
| 9 |
* Exynos5250 based board files can include this file and provide |
| 10 |
* values for board specific bindings. |
| 11 |
* |
| 12 |
* Note: This file does not include device nodes for all the controllers in |
| 13 |
* Exynos5250 SoC. As device tree coverage for Exynos5250 increases, |
| 14 |
* additional nodes can be added to this file. |
| 15 |
*/ |
| 16 |
|
| 17 |
#include <dt-bindings/clock/exynos5250.h> |
| 18 |
#include "exynos5.dtsi" |
| 19 |
#include "exynos4-cpu-thermal.dtsi" |
| 20 |
#include <dt-bindings/clock/exynos-audss-clk.h> |
| 21 |
|
| 22 |
/ { |
| 23 |
compatible = "samsung,exynos5250", "samsung,exynos5"; |
| 24 |
|
| 25 |
aliases { |
| 26 |
spi0 = &spi_0; |
| 27 |
spi1 = &spi_1; |
| 28 |
spi2 = &spi_2; |
| 29 |
gsc0 = &gsc_0; |
| 30 |
gsc1 = &gsc_1; |
| 31 |
gsc2 = &gsc_2; |
| 32 |
gsc3 = &gsc_3; |
| 33 |
i2c4 = &i2c_4; |
| 34 |
i2c5 = &i2c_5; |
| 35 |
i2c6 = &i2c_6; |
| 36 |
i2c7 = &i2c_7; |
| 37 |
i2c8 = &i2c_8; |
| 38 |
i2c9 = &i2c_9; |
| 39 |
pinctrl0 = &pinctrl_0; |
| 40 |
pinctrl1 = &pinctrl_1; |
| 41 |
pinctrl2 = &pinctrl_2; |
| 42 |
pinctrl3 = &pinctrl_3; |
| 43 |
}; |
| 44 |
|
| 45 |
cpus { |
| 46 |
#address-cells = <1>; |
| 47 |
#size-cells = <0>; |
| 48 |
|
| 49 |
cpu-map { |
| 50 |
cluster0 { |
| 51 |
core0 { |
| 52 |
cpu = <&cpu0>; |
| 53 |
}; |
| 54 |
core1 { |
| 55 |
cpu = <&cpu1>; |
| 56 |
}; |
| 57 |
}; |
| 58 |
}; |
| 59 |
|
| 60 |
cpu0: cpu@0 { |
| 61 |
device_type = "cpu"; |
| 62 |
compatible = "arm,cortex-a15"; |
| 63 |
reg = <0>; |
| 64 |
clocks = <&clock CLK_ARM_CLK>; |
| 65 |
clock-names = "cpu"; |
| 66 |
operating-points-v2 = <&cpu0_opp_table>; |
| 67 |
#cooling-cells = <2>; /* min followed by max */ |
| 68 |
}; |
| 69 |
cpu1: cpu@1 { |
| 70 |
device_type = "cpu"; |
| 71 |
compatible = "arm,cortex-a15"; |
| 72 |
reg = <1>; |
| 73 |
clocks = <&clock CLK_ARM_CLK>; |
| 74 |
clock-names = "cpu"; |
| 75 |
operating-points-v2 = <&cpu0_opp_table>; |
| 76 |
#cooling-cells = <2>; /* min followed by max */ |
| 77 |
}; |
| 78 |
}; |
| 79 |
|
| 80 |
cpu0_opp_table: opp-table-0 { |
| 81 |
compatible = "operating-points-v2"; |
| 82 |
opp-shared; |
| 83 |
|
| 84 |
opp-200000000 { |
| 85 |
opp-hz = /bits/ 64 <200000000>; |
| 86 |
opp-microvolt = <925000>; |
| 87 |
clock-latency-ns = <140000>; |
| 88 |
}; |
| 89 |
opp-300000000 { |
| 90 |
opp-hz = /bits/ 64 <300000000>; |
| 91 |
opp-microvolt = <937500>; |
| 92 |
clock-latency-ns = <140000>; |
| 93 |
}; |
| 94 |
opp-400000000 { |
| 95 |
opp-hz = /bits/ 64 <400000000>; |
| 96 |
opp-microvolt = <950000>; |
| 97 |
clock-latency-ns = <140000>; |
| 98 |
}; |
| 99 |
opp-500000000 { |
| 100 |
opp-hz = /bits/ 64 <500000000>; |
| 101 |
opp-microvolt = <975000>; |
| 102 |
clock-latency-ns = <140000>; |
| 103 |
}; |
| 104 |
opp-600000000 { |
| 105 |
opp-hz = /bits/ 64 <600000000>; |
| 106 |
opp-microvolt = <1000000>; |
| 107 |
clock-latency-ns = <140000>; |
| 108 |
}; |
| 109 |
opp-700000000 { |
| 110 |
opp-hz = /bits/ 64 <700000000>; |
| 111 |
opp-microvolt = <1012500>; |
| 112 |
clock-latency-ns = <140000>; |
| 113 |
}; |
| 114 |
opp-800000000 { |
| 115 |
opp-hz = /bits/ 64 <800000000>; |
| 116 |
opp-microvolt = <1025000>; |
| 117 |
clock-latency-ns = <140000>; |
| 118 |
}; |
| 119 |
opp-900000000 { |
| 120 |
opp-hz = /bits/ 64 <900000000>; |
| 121 |
opp-microvolt = <1050000>; |
| 122 |
clock-latency-ns = <140000>; |
| 123 |
}; |
| 124 |
opp-1000000000 { |
| 125 |
opp-hz = /bits/ 64 <1000000000>; |
| 126 |
opp-microvolt = <1075000>; |
| 127 |
clock-latency-ns = <140000>; |
| 128 |
opp-suspend; |
| 129 |
}; |
| 130 |
opp-1100000000 { |
| 131 |
opp-hz = /bits/ 64 <1100000000>; |
| 132 |
opp-microvolt = <1100000>; |
| 133 |
clock-latency-ns = <140000>; |
| 134 |
}; |
| 135 |
opp-1200000000 { |
| 136 |
opp-hz = /bits/ 64 <1200000000>; |
| 137 |
opp-microvolt = <1125000>; |
| 138 |
clock-latency-ns = <140000>; |
| 139 |
}; |
| 140 |
opp-1300000000 { |
| 141 |
opp-hz = /bits/ 64 <1300000000>; |
| 142 |
opp-microvolt = <1150000>; |
| 143 |
clock-latency-ns = <140000>; |
| 144 |
}; |
| 145 |
opp-1400000000 { |
| 146 |
opp-hz = /bits/ 64 <1400000000>; |
| 147 |
opp-microvolt = <1200000>; |
| 148 |
clock-latency-ns = <140000>; |
| 149 |
}; |
| 150 |
opp-1500000000 { |
| 151 |
opp-hz = /bits/ 64 <1500000000>; |
| 152 |
opp-microvolt = <1225000>; |
| 153 |
clock-latency-ns = <140000>; |
| 154 |
}; |
| 155 |
opp-1600000000 { |
| 156 |
opp-hz = /bits/ 64 <1600000000>; |
| 157 |
opp-microvolt = <1250000>; |
| 158 |
clock-latency-ns = <140000>; |
| 159 |
}; |
| 160 |
opp-1700000000 { |
| 161 |
opp-hz = /bits/ 64 <1700000000>; |
| 162 |
opp-microvolt = <1300000>; |
| 163 |
clock-latency-ns = <140000>; |
| 164 |
}; |
| 165 |
}; |
| 166 |
|
| 167 |
pmu { |
| 168 |
compatible = "arm,cortex-a15-pmu"; |
| 169 |
interrupt-parent = <&combiner>; |
| 170 |
interrupts = <1 2>, <22 4>; |
| 171 |
}; |
| 172 |
|
| 173 |
soc: soc { |
| 174 |
sram@2020000 { |
| 175 |
compatible = "mmio-sram"; |
| 176 |
reg = <0x02020000 0x30000>; |
| 177 |
#address-cells = <1>; |
| 178 |
#size-cells = <1>; |
| 179 |
ranges = <0 0x02020000 0x30000>; |
| 180 |
|
| 181 |
smp-sram@0 { |
| 182 |
compatible = "samsung,exynos4210-sysram"; |
| 183 |
reg = <0x0 0x1000>; |
| 184 |
}; |
| 185 |
|
| 186 |
smp-sram@2f000 { |
| 187 |
compatible = "samsung,exynos4210-sysram-ns"; |
| 188 |
reg = <0x2f000 0x1000>; |
| 189 |
}; |
| 190 |
}; |
| 191 |
|
| 192 |
pd_gsc: power-domain@10044000 { |
| 193 |
compatible = "samsung,exynos4210-pd"; |
| 194 |
reg = <0x10044000 0x20>; |
| 195 |
#power-domain-cells = <0>; |
| 196 |
label = "GSC"; |
| 197 |
}; |
| 198 |
|
| 199 |
pd_mfc: power-domain@10044040 { |
| 200 |
compatible = "samsung,exynos4210-pd"; |
| 201 |
reg = <0x10044040 0x20>; |
| 202 |
#power-domain-cells = <0>; |
| 203 |
label = "MFC"; |
| 204 |
}; |
| 205 |
|
| 206 |
pd_g3d: power-domain@10044060 { |
| 207 |
compatible = "samsung,exynos4210-pd"; |
| 208 |
reg = <0x10044060 0x20>; |
| 209 |
#power-domain-cells = <0>; |
| 210 |
label = "G3D"; |
| 211 |
}; |
| 212 |
|
| 213 |
pd_disp1: power-domain@100440a0 { |
| 214 |
compatible = "samsung,exynos4210-pd"; |
| 215 |
reg = <0x100440a0 0x20>; |
| 216 |
#power-domain-cells = <0>; |
| 217 |
label = "DISP1"; |
| 218 |
}; |
| 219 |
|
| 220 |
pd_mau: power-domain@100440c0 { |
| 221 |
compatible = "samsung,exynos4210-pd"; |
| 222 |
reg = <0x100440c0 0x20>; |
| 223 |
#power-domain-cells = <0>; |
| 224 |
label = "MAU"; |
| 225 |
}; |
| 226 |
|
| 227 |
clock: clock-controller@10010000 { |
| 228 |
compatible = "samsung,exynos5250-clock"; |
| 229 |
reg = <0x10010000 0x30000>; |
| 230 |
#clock-cells = <1>; |
| 231 |
}; |
| 232 |
|
| 233 |
clock_audss: audss-clock-controller@3810000 { |
| 234 |
compatible = "samsung,exynos5250-audss-clock"; |
| 235 |
reg = <0x03810000 0x0c>; |
| 236 |
#clock-cells = <1>; |
| 237 |
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, |
| 238 |
<&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>; |
| 239 |
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; |
| 240 |
power-domains = <&pd_mau>; |
| 241 |
}; |
| 242 |
|
| 243 |
timer@101c0000 { |
| 244 |
compatible = "samsung,exynos5250-mct", |
| 245 |
"samsung,exynos4210-mct"; |
| 246 |
reg = <0x101c0000 0x800>; |
| 247 |
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; |
| 248 |
clock-names = "fin_pll", "mct"; |
| 249 |
interrupts-extended = <&combiner 23 3>, |
| 250 |
<&combiner 23 4>, |
| 251 |
<&combiner 25 2>, |
| 252 |
<&combiner 25 3>, |
| 253 |
<&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, |
| 254 |
<&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; |
| 255 |
}; |
| 256 |
|
| 257 |
pinctrl_0: pinctrl@11400000 { |
| 258 |
compatible = "samsung,exynos5250-pinctrl"; |
| 259 |
reg = <0x11400000 0x1000>; |
| 260 |
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| 261 |
|
| 262 |
wakup_eint: wakeup-interrupt-controller { |
| 263 |
compatible = "samsung,exynos4210-wakeup-eint"; |
| 264 |
interrupt-parent = <&gic>; |
| 265 |
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| 266 |
}; |
| 267 |
}; |
| 268 |
|
| 269 |
pinctrl_1: pinctrl@13400000 { |
| 270 |
compatible = "samsung,exynos5250-pinctrl"; |
| 271 |
reg = <0x13400000 0x1000>; |
| 272 |
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| 273 |
}; |
| 274 |
|
| 275 |
pinctrl_2: pinctrl@10d10000 { |
| 276 |
compatible = "samsung,exynos5250-pinctrl"; |
| 277 |
reg = <0x10d10000 0x1000>; |
| 278 |
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| 279 |
}; |
| 280 |
|
| 281 |
pinctrl_3: pinctrl@3860000 { |
| 282 |
compatible = "samsung,exynos5250-pinctrl"; |
| 283 |
reg = <0x03860000 0x1000>; |
| 284 |
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| 285 |
power-domains = <&pd_mau>; |
| 286 |
}; |
| 287 |
|
| 288 |
pmu_system_controller: system-controller@10040000 { |
| 289 |
compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon"; |
| 290 |
reg = <0x10040000 0x5000>; |
| 291 |
clock-names = "clkout16"; |
| 292 |
clocks = <&clock CLK_FIN_PLL>; |
| 293 |
#clock-cells = <1>; |
| 294 |
interrupt-controller; |
| 295 |
#interrupt-cells = <3>; |
| 296 |
interrupt-parent = <&gic>; |
| 297 |
|
| 298 |
dp_phy: dp-phy { |
| 299 |
compatible = "samsung,exynos5250-dp-video-phy"; |
| 300 |
#phy-cells = <0>; |
| 301 |
}; |
| 302 |
|
| 303 |
mipi_phy: mipi-phy { |
| 304 |
compatible = "samsung,s5pv210-mipi-video-phy"; |
| 305 |
#phy-cells = <1>; |
| 306 |
}; |
| 307 |
}; |
| 308 |
|
| 309 |
watchdog@101d0000 { |
| 310 |
compatible = "samsung,exynos5250-wdt"; |
| 311 |
reg = <0x101d0000 0x100>; |
| 312 |
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| 313 |
clocks = <&clock CLK_WDT>; |
| 314 |
clock-names = "watchdog"; |
| 315 |
samsung,syscon-phandle = <&pmu_system_controller>; |
| 316 |
}; |
| 317 |
|
| 318 |
mfc: codec@11000000 { |
| 319 |
compatible = "samsung,mfc-v6"; |
| 320 |
reg = <0x11000000 0x10000>; |
| 321 |
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| 322 |
power-domains = <&pd_mfc>; |
| 323 |
clocks = <&clock CLK_MFC>; |
| 324 |
clock-names = "mfc"; |
| 325 |
iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; |
| 326 |
iommu-names = "left", "right"; |
| 327 |
}; |
| 328 |
|
| 329 |
rotator: rotator@11c00000 { |
| 330 |
compatible = "samsung,exynos5250-rotator"; |
| 331 |
reg = <0x11c00000 0x64>; |
| 332 |
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| 333 |
clocks = <&clock CLK_ROTATOR>; |
| 334 |
clock-names = "rotator"; |
| 335 |
iommus = <&sysmmu_rotator>; |
| 336 |
}; |
| 337 |
|
| 338 |
mali: gpu@11800000 { |
| 339 |
compatible = "samsung,exynos5250-mali", "arm,mali-t604"; |
| 340 |
reg = <0x11800000 0x5000>; |
| 341 |
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, |
| 342 |
<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |
| 343 |
<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| 344 |
interrupt-names = "job", "mmu", "gpu"; |
| 345 |
clocks = <&clock CLK_G3D>; |
| 346 |
clock-names = "core"; |
| 347 |
operating-points-v2 = <&gpu_opp_table>; |
| 348 |
power-domains = <&pd_g3d>; |
| 349 |
status = "disabled"; |
| 350 |
|
| 351 |
gpu_opp_table: opp-table { |
| 352 |
compatible = "operating-points-v2"; |
| 353 |
|
| 354 |
opp-100000000 { |
| 355 |
opp-hz = /bits/ 64 <100000000>; |
| 356 |
opp-microvolt = <925000>; |
| 357 |
}; |
| 358 |
opp-160000000 { |
| 359 |
opp-hz = /bits/ 64 <160000000>; |
| 360 |
opp-microvolt = <925000>; |
| 361 |
}; |
| 362 |
opp-266000000 { |
| 363 |
opp-hz = /bits/ 64 <266000000>; |
| 364 |
opp-microvolt = <1025000>; |
| 365 |
}; |
| 366 |
opp-350000000 { |
| 367 |
opp-hz = /bits/ 64 <350000000>; |
| 368 |
opp-microvolt = <1075000>; |
| 369 |
}; |
| 370 |
opp-400000000 { |
| 371 |
opp-hz = /bits/ 64 <400000000>; |
| 372 |
opp-microvolt = <1125000>; |
| 373 |
}; |
| 374 |
opp-450000000 { |
| 375 |
opp-hz = /bits/ 64 <450000000>; |
| 376 |
opp-microvolt = <1150000>; |
| 377 |
}; |
| 378 |
opp-533000000 { |
| 379 |
opp-hz = /bits/ 64 <533000000>; |
| 380 |
opp-microvolt = <1250000>; |
| 381 |
}; |
| 382 |
}; |
| 383 |
}; |
| 384 |
|
| 385 |
tmu: tmu@10060000 { |
| 386 |
compatible = "samsung,exynos5250-tmu"; |
| 387 |
reg = <0x10060000 0x100>; |
| 388 |
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| 389 |
clocks = <&clock CLK_TMU>; |
| 390 |
clock-names = "tmu_apbif"; |
| 391 |
#thermal-sensor-cells = <0>; |
| 392 |
}; |
| 393 |
|
| 394 |
sata: sata@122f0000 { |
| 395 |
compatible = "snps,dwc-ahci"; |
| 396 |
reg = <0x122f0000 0x1ff>; |
| 397 |
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; |
| 398 |
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>; |
| 399 |
clock-names = "sata", "pclk"; |
| 400 |
phys = <&sata_phy>; |
| 401 |
phy-names = "sata-phy"; |
| 402 |
ports-implemented = <0x1>; |
| 403 |
status = "disabled"; |
| 404 |
}; |
| 405 |
|
| 406 |
sata_phy: sata-phy@12170000 { |
| 407 |
compatible = "samsung,exynos5250-sata-phy"; |
| 408 |
reg = <0x12170000 0x1ff>; |
| 409 |
clocks = <&clock CLK_SATA_PHYCTRL>; |
| 410 |
clock-names = "sata_phyctrl"; |
| 411 |
#phy-cells = <0>; |
| 412 |
samsung,syscon-phandle = <&pmu_system_controller>; |
| 413 |
status = "disabled"; |
| 414 |
}; |
| 415 |
|
| 416 |
/* i2c_0-3 are defined in exynos5.dtsi */ |
| 417 |
i2c_4: i2c@12ca0000 { |
| 418 |
compatible = "samsung,s3c2440-i2c"; |
| 419 |
reg = <0x12ca0000 0x100>; |
| 420 |
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| 421 |
#address-cells = <1>; |
| 422 |
#size-cells = <0>; |
| 423 |
clocks = <&clock CLK_I2C4>; |
| 424 |
clock-names = "i2c"; |
| 425 |
pinctrl-names = "default"; |
| 426 |
pinctrl-0 = <&i2c4_bus>; |
| 427 |
status = "disabled"; |
| 428 |
}; |
| 429 |
|
| 430 |
i2c_5: i2c@12cb0000 { |
| 431 |
compatible = "samsung,s3c2440-i2c"; |
| 432 |
reg = <0x12cb0000 0x100>; |
| 433 |
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| 434 |
#address-cells = <1>; |
| 435 |
#size-cells = <0>; |
| 436 |
clocks = <&clock CLK_I2C5>; |
| 437 |
clock-names = "i2c"; |
| 438 |
pinctrl-names = "default"; |
| 439 |
pinctrl-0 = <&i2c5_bus>; |
| 440 |
status = "disabled"; |
| 441 |
}; |
| 442 |
|
| 443 |
i2c_6: i2c@12cc0000 { |
| 444 |
compatible = "samsung,s3c2440-i2c"; |
| 445 |
reg = <0x12cc0000 0x100>; |
| 446 |
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| 447 |
#address-cells = <1>; |
| 448 |
#size-cells = <0>; |
| 449 |
clocks = <&clock CLK_I2C6>; |
| 450 |
clock-names = "i2c"; |
| 451 |
pinctrl-names = "default"; |
| 452 |
pinctrl-0 = <&i2c6_bus>; |
| 453 |
status = "disabled"; |
| 454 |
}; |
| 455 |
|
| 456 |
i2c_7: i2c@12cd0000 { |
| 457 |
compatible = "samsung,s3c2440-i2c"; |
| 458 |
reg = <0x12cd0000 0x100>; |
| 459 |
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| 460 |
#address-cells = <1>; |
| 461 |
#size-cells = <0>; |
| 462 |
clocks = <&clock CLK_I2C7>; |
| 463 |
clock-names = "i2c"; |
| 464 |
pinctrl-names = "default"; |
| 465 |
pinctrl-0 = <&i2c7_bus>; |
| 466 |
status = "disabled"; |
| 467 |
}; |
| 468 |
|
| 469 |
i2c_8: i2c@12ce0000 { |
| 470 |
compatible = "samsung,s3c2440-hdmiphy-i2c"; |
| 471 |
reg = <0x12ce0000 0x1000>; |
| 472 |
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| 473 |
#address-cells = <1>; |
| 474 |
#size-cells = <0>; |
| 475 |
clocks = <&clock CLK_I2C_HDMI>; |
| 476 |
clock-names = "i2c"; |
| 477 |
status = "disabled"; |
| 478 |
|
| 479 |
hdmiphy: hdmi-phy@38 { |
| 480 |
compatible = "samsung,exynos4212-hdmiphy"; |
| 481 |
reg = <0x38>; |
| 482 |
}; |
| 483 |
}; |
| 484 |
|
| 485 |
i2c_9: i2c@121d0000 { |
| 486 |
compatible = "samsung,exynos5-sata-phy-i2c"; |
| 487 |
reg = <0x121d0000 0x100>; |
| 488 |
#address-cells = <1>; |
| 489 |
#size-cells = <0>; |
| 490 |
clocks = <&clock CLK_SATA_PHYI2C>; |
| 491 |
clock-names = "i2c"; |
| 492 |
status = "disabled"; |
| 493 |
|
| 494 |
sata_phy_i2c: sata-phy-i2c@38 { |
| 495 |
compatible = "samsung,exynos-sataphy-i2c"; |
| 496 |
reg = <0x38>; |
| 497 |
status = "disabled"; |
| 498 |
}; |
| 499 |
}; |
| 500 |
|
| 501 |
spi_0: spi@12d20000 { |
| 502 |
compatible = "samsung,exynos4210-spi"; |
| 503 |
status = "disabled"; |
| 504 |
reg = <0x12d20000 0x100>; |
| 505 |
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| 506 |
dmas = <&pdma0 5>, <&pdma0 4>; |
| 507 |
dma-names = "tx", "rx"; |
| 508 |
#address-cells = <1>; |
| 509 |
#size-cells = <0>; |
| 510 |
clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; |
| 511 |
clock-names = "spi", "spi_busclk0"; |
| 512 |
pinctrl-names = "default"; |
| 513 |
pinctrl-0 = <&spi0_bus>; |
| 514 |
fifo-depth = <256>; |
| 515 |
}; |
| 516 |
|
| 517 |
spi_1: spi@12d30000 { |
| 518 |
compatible = "samsung,exynos4210-spi"; |
| 519 |
status = "disabled"; |
| 520 |
reg = <0x12d30000 0x100>; |
| 521 |
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| 522 |
dmas = <&pdma1 5>, <&pdma1 4>; |
| 523 |
dma-names = "tx", "rx"; |
| 524 |
#address-cells = <1>; |
| 525 |
#size-cells = <0>; |
| 526 |
clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; |
| 527 |
clock-names = "spi", "spi_busclk0"; |
| 528 |
pinctrl-names = "default"; |
| 529 |
pinctrl-0 = <&spi1_bus>; |
| 530 |
fifo-depth = <64>; |
| 531 |
}; |
| 532 |
|
| 533 |
spi_2: spi@12d40000 { |
| 534 |
compatible = "samsung,exynos4210-spi"; |
| 535 |
status = "disabled"; |
| 536 |
reg = <0x12d40000 0x100>; |
| 537 |
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| 538 |
dmas = <&pdma0 7>, <&pdma0 6>; |
| 539 |
dma-names = "tx", "rx"; |
| 540 |
#address-cells = <1>; |
| 541 |
#size-cells = <0>; |
| 542 |
clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; |
| 543 |
clock-names = "spi", "spi_busclk0"; |
| 544 |
pinctrl-names = "default"; |
| 545 |
pinctrl-0 = <&spi2_bus>; |
| 546 |
fifo-depth = <64>; |
| 547 |
}; |
| 548 |
|
| 549 |
mmc_0: mmc@12200000 { |
| 550 |
compatible = "samsung,exynos5250-dw-mshc"; |
| 551 |
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| 552 |
#address-cells = <1>; |
| 553 |
#size-cells = <0>; |
| 554 |
reg = <0x12200000 0x1000>; |
| 555 |
clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; |
| 556 |
clock-names = "biu", "ciu"; |
| 557 |
fifo-depth = <0x80>; |
| 558 |
status = "disabled"; |
| 559 |
}; |
| 560 |
|
| 561 |
mmc_1: mmc@12210000 { |
| 562 |
compatible = "samsung,exynos5250-dw-mshc"; |
| 563 |
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| 564 |
#address-cells = <1>; |
| 565 |
#size-cells = <0>; |
| 566 |
reg = <0x12210000 0x1000>; |
| 567 |
clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; |
| 568 |
clock-names = "biu", "ciu"; |
| 569 |
fifo-depth = <0x80>; |
| 570 |
status = "disabled"; |
| 571 |
}; |
| 572 |
|
| 573 |
mmc_2: mmc@12220000 { |
| 574 |
compatible = "samsung,exynos5250-dw-mshc"; |
| 575 |
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| 576 |
#address-cells = <1>; |
| 577 |
#size-cells = <0>; |
| 578 |
reg = <0x12220000 0x1000>; |
| 579 |
clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; |
| 580 |
clock-names = "biu", "ciu"; |
| 581 |
fifo-depth = <0x80>; |
| 582 |
status = "disabled"; |
| 583 |
}; |
| 584 |
|
| 585 |
mmc_3: mmc@12230000 { |
| 586 |
compatible = "samsung,exynos5250-dw-mshc"; |
| 587 |
reg = <0x12230000 0x1000>; |
| 588 |
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| 589 |
#address-cells = <1>; |
| 590 |
#size-cells = <0>; |
| 591 |
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; |
| 592 |
clock-names = "biu", "ciu"; |
| 593 |
fifo-depth = <0x80>; |
| 594 |
status = "disabled"; |
| 595 |
}; |
| 596 |
|
| 597 |
i2s0: i2s@3830000 { |
| 598 |
compatible = "samsung,s5pv210-i2s"; |
| 599 |
status = "disabled"; |
| 600 |
reg = <0x03830000 0x100>; |
| 601 |
dmas = <&pdma0 10>, |
| 602 |
<&pdma0 9>, |
| 603 |
<&pdma0 8>; |
| 604 |
dma-names = "tx", "rx", "tx-sec"; |
| 605 |
clocks = <&clock_audss EXYNOS_I2S_BUS>, |
| 606 |
<&clock_audss EXYNOS_I2S_BUS>, |
| 607 |
<&clock_audss EXYNOS_SCLK_I2S>; |
| 608 |
clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; |
| 609 |
samsung,idma-addr = <0x03000000>; |
| 610 |
pinctrl-names = "default"; |
| 611 |
pinctrl-0 = <&i2s0_bus>; |
| 612 |
power-domains = <&pd_mau>; |
| 613 |
#clock-cells = <1>; |
| 614 |
#sound-dai-cells = <1>; |
| 615 |
}; |
| 616 |
|
| 617 |
i2s1: i2s@12d60000 { |
| 618 |
compatible = "samsung,s3c6410-i2s"; |
| 619 |
status = "disabled"; |
| 620 |
reg = <0x12d60000 0x100>; |
| 621 |
dmas = <&pdma1 12>, |
| 622 |
<&pdma1 11>; |
| 623 |
dma-names = "tx", "rx"; |
| 624 |
clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>; |
| 625 |
clock-names = "iis", "i2s_opclk0"; |
| 626 |
pinctrl-names = "default"; |
| 627 |
pinctrl-0 = <&i2s1_bus>; |
| 628 |
power-domains = <&pd_mau>; |
| 629 |
#sound-dai-cells = <1>; |
| 630 |
}; |
| 631 |
|
| 632 |
i2s2: i2s@12d70000 { |
| 633 |
compatible = "samsung,s3c6410-i2s"; |
| 634 |
status = "disabled"; |
| 635 |
reg = <0x12d70000 0x100>; |
| 636 |
dmas = <&pdma0 12>, |
| 637 |
<&pdma0 11>; |
| 638 |
dma-names = "tx", "rx"; |
| 639 |
clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>; |
| 640 |
clock-names = "iis", "i2s_opclk0"; |
| 641 |
pinctrl-names = "default"; |
| 642 |
pinctrl-0 = <&i2s2_bus>; |
| 643 |
power-domains = <&pd_mau>; |
| 644 |
#sound-dai-cells = <1>; |
| 645 |
}; |
| 646 |
|
| 647 |
usbdrd: usb@12000000 { |
| 648 |
compatible = "samsung,exynos5250-dwusb3"; |
| 649 |
clocks = <&clock CLK_USB3>; |
| 650 |
clock-names = "usbdrd30"; |
| 651 |
#address-cells = <1>; |
| 652 |
#size-cells = <1>; |
| 653 |
ranges = <0x0 0x12000000 0x10000>; |
| 654 |
|
| 655 |
usbdrd_dwc3: usb@0 { |
| 656 |
compatible = "snps,dwc3"; |
| 657 |
reg = <0x0 0x10000>; |
| 658 |
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| 659 |
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; |
| 660 |
phy-names = "usb2-phy", "usb3-phy"; |
| 661 |
}; |
| 662 |
}; |
| 663 |
|
| 664 |
usbdrd_phy: phy@12100000 { |
| 665 |
compatible = "samsung,exynos5250-usbdrd-phy"; |
| 666 |
reg = <0x12100000 0x100>; |
| 667 |
clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>; |
| 668 |
clock-names = "phy", "ref"; |
| 669 |
samsung,pmu-syscon = <&pmu_system_controller>; |
| 670 |
#phy-cells = <1>; |
| 671 |
}; |
| 672 |
|
| 673 |
ehci: usb@12110000 { |
| 674 |
compatible = "samsung,exynos4210-ehci"; |
| 675 |
reg = <0x12110000 0x100>; |
| 676 |
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 677 |
|
| 678 |
clocks = <&clock CLK_USB2>; |
| 679 |
clock-names = "usbhost"; |
| 680 |
phys = <&usb2_phy_gen 1>; |
| 681 |
phy-names = "host"; |
| 682 |
}; |
| 683 |
|
| 684 |
ohci: usb@12120000 { |
| 685 |
compatible = "samsung,exynos4210-ohci"; |
| 686 |
reg = <0x12120000 0x100>; |
| 687 |
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| 688 |
|
| 689 |
clocks = <&clock CLK_USB2>; |
| 690 |
clock-names = "usbhost"; |
| 691 |
phys = <&usb2_phy_gen 1>; |
| 692 |
phy-names = "host"; |
| 693 |
}; |
| 694 |
|
| 695 |
usb2_phy_gen: phy@12130000 { |
| 696 |
compatible = "samsung,exynos5250-usb2-phy"; |
| 697 |
reg = <0x12130000 0x100>; |
| 698 |
clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>; |
| 699 |
clock-names = "phy", "ref"; |
| 700 |
#phy-cells = <1>; |
| 701 |
samsung,sysreg-phandle = <&sysreg_system_controller>; |
| 702 |
samsung,pmureg-phandle = <&pmu_system_controller>; |
| 703 |
}; |
| 704 |
|
| 705 |
pdma0: dma-controller@121a0000 { |
| 706 |
compatible = "arm,pl330", "arm,primecell"; |
| 707 |
reg = <0x121a0000 0x1000>; |
| 708 |
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| 709 |
clocks = <&clock CLK_PDMA0>; |
| 710 |
clock-names = "apb_pclk"; |
| 711 |
#dma-cells = <1>; |
| 712 |
}; |
| 713 |
|
| 714 |
pdma1: dma-controller@121b0000 { |
| 715 |
compatible = "arm,pl330", "arm,primecell"; |
| 716 |
reg = <0x121b0000 0x1000>; |
| 717 |
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| 718 |
clocks = <&clock CLK_PDMA1>; |
| 719 |
clock-names = "apb_pclk"; |
| 720 |
#dma-cells = <1>; |
| 721 |
}; |
| 722 |
|
| 723 |
mdma0: dma-controller@10800000 { |
| 724 |
compatible = "arm,pl330", "arm,primecell"; |
| 725 |
reg = <0x10800000 0x1000>; |
| 726 |
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| 727 |
clocks = <&clock CLK_MDMA0>; |
| 728 |
clock-names = "apb_pclk"; |
| 729 |
#dma-cells = <1>; |
| 730 |
}; |
| 731 |
|
| 732 |
mdma1: dma-controller@11c10000 { |
| 733 |
compatible = "arm,pl330", "arm,primecell"; |
| 734 |
reg = <0x11c10000 0x1000>; |
| 735 |
interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; |
| 736 |
clocks = <&clock CLK_MDMA1>; |
| 737 |
clock-names = "apb_pclk"; |
| 738 |
#dma-cells = <1>; |
| 739 |
}; |
| 740 |
|
| 741 |
gsc_0: gsc@13e00000 { |
| 742 |
compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; |
| 743 |
reg = <0x13e00000 0x1000>; |
| 744 |
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| 745 |
power-domains = <&pd_gsc>; |
| 746 |
clocks = <&clock CLK_GSCL0>; |
| 747 |
clock-names = "gscl"; |
| 748 |
iommus = <&sysmmu_gsc0>; |
| 749 |
}; |
| 750 |
|
| 751 |
gsc_1: gsc@13e10000 { |
| 752 |
compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; |
| 753 |
reg = <0x13e10000 0x1000>; |
| 754 |
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| 755 |
power-domains = <&pd_gsc>; |
| 756 |
clocks = <&clock CLK_GSCL1>; |
| 757 |
clock-names = "gscl"; |
| 758 |
iommus = <&sysmmu_gsc1>; |
| 759 |
}; |
| 760 |
|
| 761 |
gsc_2: gsc@13e20000 { |
| 762 |
compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; |
| 763 |
reg = <0x13e20000 0x1000>; |
| 764 |
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| 765 |
power-domains = <&pd_gsc>; |
| 766 |
clocks = <&clock CLK_GSCL2>; |
| 767 |
clock-names = "gscl"; |
| 768 |
iommus = <&sysmmu_gsc2>; |
| 769 |
}; |
| 770 |
|
| 771 |
gsc_3: gsc@13e30000 { |
| 772 |
compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc"; |
| 773 |
reg = <0x13e30000 0x1000>; |
| 774 |
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| 775 |
power-domains = <&pd_gsc>; |
| 776 |
clocks = <&clock CLK_GSCL3>; |
| 777 |
clock-names = "gscl"; |
| 778 |
iommus = <&sysmmu_gsc3>; |
| 779 |
}; |
| 780 |
|
| 781 |
hdmi: hdmi@14530000 { |
| 782 |
compatible = "samsung,exynos4212-hdmi"; |
| 783 |
reg = <0x14530000 0x70000>; |
| 784 |
power-domains = <&pd_disp1>; |
| 785 |
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| 786 |
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, |
| 787 |
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, |
| 788 |
<&clock CLK_MOUT_HDMI>; |
| 789 |
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", |
| 790 |
"sclk_hdmiphy", "mout_hdmi"; |
| 791 |
samsung,syscon-phandle = <&pmu_system_controller>; |
| 792 |
phy = <&hdmiphy>; |
| 793 |
#sound-dai-cells = <0>; |
| 794 |
status = "disabled"; |
| 795 |
}; |
| 796 |
|
| 797 |
hdmicec: cec@101b0000 { |
| 798 |
compatible = "samsung,s5p-cec"; |
| 799 |
reg = <0x101b0000 0x200>; |
| 800 |
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| 801 |
clocks = <&clock CLK_HDMI_CEC>; |
| 802 |
clock-names = "hdmicec"; |
| 803 |
samsung,syscon-phandle = <&pmu_system_controller>; |
| 804 |
hdmi-phandle = <&hdmi>; |
| 805 |
pinctrl-names = "default"; |
| 806 |
pinctrl-0 = <&hdmi_cec>; |
| 807 |
status = "disabled"; |
| 808 |
}; |
| 809 |
|
| 810 |
mixer: mixer@14450000 { |
| 811 |
compatible = "samsung,exynos5250-mixer"; |
| 812 |
reg = <0x14450000 0x10000>; |
| 813 |
power-domains = <&pd_disp1>; |
| 814 |
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| 815 |
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, |
| 816 |
<&clock CLK_SCLK_HDMI>; |
| 817 |
clock-names = "mixer", "hdmi", "sclk_hdmi"; |
| 818 |
iommus = <&sysmmu_tv>; |
| 819 |
status = "disabled"; |
| 820 |
}; |
| 821 |
|
| 822 |
dsi_0: dsi@14500000 { |
| 823 |
compatible = "samsung,exynos4210-mipi-dsi"; |
| 824 |
reg = <0x14500000 0x10000>; |
| 825 |
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; |
| 826 |
samsung,power-domain = <&pd_disp1>; |
| 827 |
phys = <&mipi_phy 3>; |
| 828 |
phy-names = "dsim"; |
| 829 |
clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>; |
| 830 |
clock-names = "bus_clk", "sclk_mipi"; |
| 831 |
status = "disabled"; |
| 832 |
#address-cells = <1>; |
| 833 |
#size-cells = <0>; |
| 834 |
}; |
| 835 |
|
| 836 |
adc: adc@12d10000 { |
| 837 |
compatible = "samsung,exynos-adc-v1"; |
| 838 |
reg = <0x12d10000 0x100>; |
| 839 |
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| 840 |
clocks = <&clock CLK_ADC>; |
| 841 |
clock-names = "adc"; |
| 842 |
#io-channel-cells = <1>; |
| 843 |
samsung,syscon-phandle = <&pmu_system_controller>; |
| 844 |
status = "disabled"; |
| 845 |
}; |
| 846 |
|
| 847 |
sysmmu_g2d: sysmmu@10a60000 { |
| 848 |
compatible = "samsung,exynos-sysmmu"; |
| 849 |
reg = <0x10a60000 0x1000>; |
| 850 |
interrupt-parent = <&combiner>; |
| 851 |
interrupts = <24 5>; |
| 852 |
clock-names = "sysmmu", "master"; |
| 853 |
clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>; |
| 854 |
#iommu-cells = <0>; |
| 855 |
}; |
| 856 |
|
| 857 |
sysmmu_mfc_r: sysmmu@11200000 { |
| 858 |
compatible = "samsung,exynos-sysmmu"; |
| 859 |
reg = <0x11200000 0x1000>; |
| 860 |
interrupt-parent = <&combiner>; |
| 861 |
interrupts = <6 2>; |
| 862 |
power-domains = <&pd_mfc>; |
| 863 |
clock-names = "sysmmu", "master"; |
| 864 |
clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; |
| 865 |
#iommu-cells = <0>; |
| 866 |
}; |
| 867 |
|
| 868 |
sysmmu_mfc_l: sysmmu@11210000 { |
| 869 |
compatible = "samsung,exynos-sysmmu"; |
| 870 |
reg = <0x11210000 0x1000>; |
| 871 |
interrupt-parent = <&combiner>; |
| 872 |
interrupts = <8 5>; |
| 873 |
power-domains = <&pd_mfc>; |
| 874 |
clock-names = "sysmmu", "master"; |
| 875 |
clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; |
| 876 |
#iommu-cells = <0>; |
| 877 |
}; |
| 878 |
|
| 879 |
sysmmu_rotator: sysmmu@11d40000 { |
| 880 |
compatible = "samsung,exynos-sysmmu"; |
| 881 |
reg = <0x11d40000 0x1000>; |
| 882 |
interrupt-parent = <&combiner>; |
| 883 |
interrupts = <4 0>; |
| 884 |
clock-names = "sysmmu", "master"; |
| 885 |
clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; |
| 886 |
#iommu-cells = <0>; |
| 887 |
}; |
| 888 |
|
| 889 |
sysmmu_jpeg: sysmmu@11f20000 { |
| 890 |
compatible = "samsung,exynos-sysmmu"; |
| 891 |
reg = <0x11f20000 0x1000>; |
| 892 |
interrupt-parent = <&combiner>; |
| 893 |
interrupts = <4 2>; |
| 894 |
power-domains = <&pd_gsc>; |
| 895 |
clock-names = "sysmmu", "master"; |
| 896 |
clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; |
| 897 |
#iommu-cells = <0>; |
| 898 |
}; |
| 899 |
|
| 900 |
sysmmu_fimc_isp: sysmmu@13260000 { |
| 901 |
compatible = "samsung,exynos-sysmmu"; |
| 902 |
reg = <0x13260000 0x1000>; |
| 903 |
interrupt-parent = <&combiner>; |
| 904 |
interrupts = <10 6>; |
| 905 |
clock-names = "sysmmu"; |
| 906 |
clocks = <&clock CLK_SMMU_FIMC_ISP>; |
| 907 |
#iommu-cells = <0>; |
| 908 |
}; |
| 909 |
|
| 910 |
sysmmu_fimc_drc: sysmmu@13270000 { |
| 911 |
compatible = "samsung,exynos-sysmmu"; |
| 912 |
reg = <0x13270000 0x1000>; |
| 913 |
interrupt-parent = <&combiner>; |
| 914 |
interrupts = <11 6>; |
| 915 |
clock-names = "sysmmu"; |
| 916 |
clocks = <&clock CLK_SMMU_FIMC_DRC>; |
| 917 |
#iommu-cells = <0>; |
| 918 |
}; |
| 919 |
|
| 920 |
sysmmu_fimc_fd: sysmmu@132a0000 { |
| 921 |
compatible = "samsung,exynos-sysmmu"; |
| 922 |
reg = <0x132a0000 0x1000>; |
| 923 |
interrupt-parent = <&combiner>; |
| 924 |
interrupts = <5 0>; |
| 925 |
clock-names = "sysmmu"; |
| 926 |
clocks = <&clock CLK_SMMU_FIMC_FD>; |
| 927 |
#iommu-cells = <0>; |
| 928 |
}; |
| 929 |
|
| 930 |
sysmmu_fimc_scc: sysmmu@13280000 { |
| 931 |
compatible = "samsung,exynos-sysmmu"; |
| 932 |
reg = <0x13280000 0x1000>; |
| 933 |
interrupt-parent = <&combiner>; |
| 934 |
interrupts = <5 2>; |
| 935 |
clock-names = "sysmmu"; |
| 936 |
clocks = <&clock CLK_SMMU_FIMC_SCC>; |
| 937 |
#iommu-cells = <0>; |
| 938 |
}; |
| 939 |
|
| 940 |
sysmmu_fimc_scp: sysmmu@13290000 { |
| 941 |
compatible = "samsung,exynos-sysmmu"; |
| 942 |
reg = <0x13290000 0x1000>; |
| 943 |
interrupt-parent = <&combiner>; |
| 944 |
interrupts = <3 6>; |
| 945 |
clock-names = "sysmmu"; |
| 946 |
clocks = <&clock CLK_SMMU_FIMC_SCP>; |
| 947 |
#iommu-cells = <0>; |
| 948 |
}; |
| 949 |
|
| 950 |
sysmmu_fimc_mcuctl: sysmmu@132b0000 { |
| 951 |
compatible = "samsung,exynos-sysmmu"; |
| 952 |
reg = <0x132b0000 0x1000>; |
| 953 |
interrupt-parent = <&combiner>; |
| 954 |
interrupts = <5 4>; |
| 955 |
clock-names = "sysmmu"; |
| 956 |
clocks = <&clock CLK_SMMU_FIMC_MCU>; |
| 957 |
#iommu-cells = <0>; |
| 958 |
}; |
| 959 |
|
| 960 |
sysmmu_fimc_odc: sysmmu@132c0000 { |
| 961 |
compatible = "samsung,exynos-sysmmu"; |
| 962 |
reg = <0x132c0000 0x1000>; |
| 963 |
interrupt-parent = <&combiner>; |
| 964 |
interrupts = <11 0>; |
| 965 |
clock-names = "sysmmu"; |
| 966 |
clocks = <&clock CLK_SMMU_FIMC_ODC>; |
| 967 |
#iommu-cells = <0>; |
| 968 |
}; |
| 969 |
|
| 970 |
sysmmu_fimc_dis0: sysmmu@132d0000 { |
| 971 |
compatible = "samsung,exynos-sysmmu"; |
| 972 |
reg = <0x132d0000 0x1000>; |
| 973 |
interrupt-parent = <&combiner>; |
| 974 |
interrupts = <10 4>; |
| 975 |
clock-names = "sysmmu"; |
| 976 |
clocks = <&clock CLK_SMMU_FIMC_DIS0>; |
| 977 |
#iommu-cells = <0>; |
| 978 |
}; |
| 979 |
|
| 980 |
sysmmu_fimc_dis1: sysmmu@132e0000 { |
| 981 |
compatible = "samsung,exynos-sysmmu"; |
| 982 |
reg = <0x132e0000 0x1000>; |
| 983 |
interrupt-parent = <&combiner>; |
| 984 |
interrupts = <9 4>; |
| 985 |
clock-names = "sysmmu"; |
| 986 |
clocks = <&clock CLK_SMMU_FIMC_DIS1>; |
| 987 |
#iommu-cells = <0>; |
| 988 |
}; |
| 989 |
|
| 990 |
sysmmu_fimc_3dnr: sysmmu@132f0000 { |
| 991 |
compatible = "samsung,exynos-sysmmu"; |
| 992 |
reg = <0x132f0000 0x1000>; |
| 993 |
interrupt-parent = <&combiner>; |
| 994 |
interrupts = <5 6>; |
| 995 |
clock-names = "sysmmu"; |
| 996 |
clocks = <&clock CLK_SMMU_FIMC_3DNR>; |
| 997 |
#iommu-cells = <0>; |
| 998 |
}; |
| 999 |
|
| 1000 |
sysmmu_fimc_lite0: sysmmu@13c40000 { |
| 1001 |
compatible = "samsung,exynos-sysmmu"; |
| 1002 |
reg = <0x13c40000 0x1000>; |
| 1003 |
interrupt-parent = <&combiner>; |
| 1004 |
interrupts = <3 4>; |
| 1005 |
power-domains = <&pd_gsc>; |
| 1006 |
clock-names = "sysmmu", "master"; |
| 1007 |
clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>; |
| 1008 |
#iommu-cells = <0>; |
| 1009 |
}; |
| 1010 |
|
| 1011 |
sysmmu_fimc_lite1: sysmmu@13c50000 { |
| 1012 |
compatible = "samsung,exynos-sysmmu"; |
| 1013 |
reg = <0x13c50000 0x1000>; |
| 1014 |
interrupt-parent = <&combiner>; |
| 1015 |
interrupts = <24 1>; |
| 1016 |
power-domains = <&pd_gsc>; |
| 1017 |
clock-names = "sysmmu", "master"; |
| 1018 |
clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>; |
| 1019 |
#iommu-cells = <0>; |
| 1020 |
}; |
| 1021 |
|
| 1022 |
sysmmu_gsc0: sysmmu@13e80000 { |
| 1023 |
compatible = "samsung,exynos-sysmmu"; |
| 1024 |
reg = <0x13e80000 0x1000>; |
| 1025 |
interrupt-parent = <&combiner>; |
| 1026 |
interrupts = <2 0>; |
| 1027 |
power-domains = <&pd_gsc>; |
| 1028 |
clock-names = "sysmmu", "master"; |
| 1029 |
clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; |
| 1030 |
#iommu-cells = <0>; |
| 1031 |
}; |
| 1032 |
|
| 1033 |
sysmmu_gsc1: sysmmu@13e90000 { |
| 1034 |
compatible = "samsung,exynos-sysmmu"; |
| 1035 |
reg = <0x13e90000 0x1000>; |
| 1036 |
interrupt-parent = <&combiner>; |
| 1037 |
interrupts = <2 2>; |
| 1038 |
power-domains = <&pd_gsc>; |
| 1039 |
clock-names = "sysmmu", "master"; |
| 1040 |
clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; |
| 1041 |
#iommu-cells = <0>; |
| 1042 |
}; |
| 1043 |
|
| 1044 |
sysmmu_gsc2: sysmmu@13ea0000 { |
| 1045 |
compatible = "samsung,exynos-sysmmu"; |
| 1046 |
reg = <0x13ea0000 0x1000>; |
| 1047 |
interrupt-parent = <&combiner>; |
| 1048 |
interrupts = <2 4>; |
| 1049 |
power-domains = <&pd_gsc>; |
| 1050 |
clock-names = "sysmmu", "master"; |
| 1051 |
clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>; |
| 1052 |
#iommu-cells = <0>; |
| 1053 |
}; |
| 1054 |
|
| 1055 |
sysmmu_gsc3: sysmmu@13eb0000 { |
| 1056 |
compatible = "samsung,exynos-sysmmu"; |
| 1057 |
reg = <0x13eb0000 0x1000>; |
| 1058 |
interrupt-parent = <&combiner>; |
| 1059 |
interrupts = <2 6>; |
| 1060 |
power-domains = <&pd_gsc>; |
| 1061 |
clock-names = "sysmmu", "master"; |
| 1062 |
clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>; |
| 1063 |
#iommu-cells = <0>; |
| 1064 |
}; |
| 1065 |
|
| 1066 |
sysmmu_fimd1: sysmmu@14640000 { |
| 1067 |
compatible = "samsung,exynos-sysmmu"; |
| 1068 |
reg = <0x14640000 0x1000>; |
| 1069 |
interrupt-parent = <&combiner>; |
| 1070 |
interrupts = <3 2>; |
| 1071 |
power-domains = <&pd_disp1>; |
| 1072 |
clock-names = "sysmmu", "master"; |
| 1073 |
clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; |
| 1074 |
#iommu-cells = <0>; |
| 1075 |
}; |
| 1076 |
|
| 1077 |
sysmmu_tv: sysmmu@14650000 { |
| 1078 |
compatible = "samsung,exynos-sysmmu"; |
| 1079 |
reg = <0x14650000 0x1000>; |
| 1080 |
interrupt-parent = <&combiner>; |
| 1081 |
interrupts = <7 4>; |
| 1082 |
power-domains = <&pd_disp1>; |
| 1083 |
clock-names = "sysmmu", "master"; |
| 1084 |
clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; |
| 1085 |
#iommu-cells = <0>; |
| 1086 |
}; |
| 1087 |
}; |
| 1088 |
|
| 1089 |
timer { |
| 1090 |
compatible = "arm,armv7-timer"; |
| 1091 |
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 1092 |
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 1093 |
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| 1094 |
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| 1095 |
/* |
| 1096 |
* Unfortunately we need this since some versions |
| 1097 |
* of U-Boot on Exynos don't set the CNTFRQ register, |
| 1098 |
* so we need the value from DT. |
| 1099 |
*/ |
| 1100 |
clock-frequency = <24000000>; |
| 1101 |
}; |
| 1102 |
}; |
| 1103 |
|
| 1104 |
&cpu_thermal { |
| 1105 |
polling-delay-passive = <0>; |
| 1106 |
polling-delay = <0>; |
| 1107 |
thermal-sensors = <&tmu>; |
| 1108 |
|
| 1109 |
cooling-maps { |
| 1110 |
map0 { |
| 1111 |
/* Corresponds to 800MHz at freq_table */ |
| 1112 |
cooling-device = <&cpu0 9 9>, <&cpu1 9 9>; |
| 1113 |
}; |
| 1114 |
map1 { |
| 1115 |
/* Corresponds to 200MHz at freq_table */ |
| 1116 |
cooling-device = <&cpu0 15 15>, |
| 1117 |
<&cpu1 15 15>; |
| 1118 |
}; |
| 1119 |
}; |
| 1120 |
}; |
| 1121 |
|
| 1122 |
&dp { |
| 1123 |
power-domains = <&pd_disp1>; |
| 1124 |
clocks = <&clock CLK_DP>; |
| 1125 |
clock-names = "dp"; |
| 1126 |
phys = <&dp_phy>; |
| 1127 |
phy-names = "dp"; |
| 1128 |
}; |
| 1129 |
|
| 1130 |
&fimd { |
| 1131 |
power-domains = <&pd_disp1>; |
| 1132 |
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; |
| 1133 |
clock-names = "sclk_fimd", "fimd"; |
| 1134 |
iommus = <&sysmmu_fimd1>; |
| 1135 |
}; |
| 1136 |
|
| 1137 |
&g2d { |
| 1138 |
iommus = <&sysmmu_g2d>; |
| 1139 |
clocks = <&clock CLK_G2D>; |
| 1140 |
clock-names = "fimg2d"; |
| 1141 |
status = "okay"; |
| 1142 |
}; |
| 1143 |
|
| 1144 |
&i2c_0 { |
| 1145 |
clocks = <&clock CLK_I2C0>; |
| 1146 |
clock-names = "i2c"; |
| 1147 |
pinctrl-names = "default"; |
| 1148 |
pinctrl-0 = <&i2c0_bus>; |
| 1149 |
}; |
| 1150 |
|
| 1151 |
&i2c_1 { |
| 1152 |
clocks = <&clock CLK_I2C1>; |
| 1153 |
clock-names = "i2c"; |
| 1154 |
pinctrl-names = "default"; |
| 1155 |
pinctrl-0 = <&i2c1_bus>; |
| 1156 |
}; |
| 1157 |
|
| 1158 |
&i2c_2 { |
| 1159 |
clocks = <&clock CLK_I2C2>; |
| 1160 |
clock-names = "i2c"; |
| 1161 |
pinctrl-names = "default"; |
| 1162 |
pinctrl-0 = <&i2c2_bus>; |
| 1163 |
}; |
| 1164 |
|
| 1165 |
&i2c_3 { |
| 1166 |
clocks = <&clock CLK_I2C3>; |
| 1167 |
clock-names = "i2c"; |
| 1168 |
pinctrl-names = "default"; |
| 1169 |
pinctrl-0 = <&i2c3_bus>; |
| 1170 |
}; |
| 1171 |
|
| 1172 |
&prng { |
| 1173 |
clocks = <&clock CLK_SSS>; |
| 1174 |
clock-names = "secss"; |
| 1175 |
}; |
| 1176 |
|
| 1177 |
&pwm { |
| 1178 |
clocks = <&clock CLK_PWM>; |
| 1179 |
clock-names = "timers"; |
| 1180 |
}; |
| 1181 |
|
| 1182 |
&rtc { |
| 1183 |
clocks = <&clock CLK_RTC>; |
| 1184 |
clock-names = "rtc"; |
| 1185 |
interrupt-parent = <&pmu_system_controller>; |
| 1186 |
status = "disabled"; |
| 1187 |
}; |
| 1188 |
|
| 1189 |
&serial_0 { |
| 1190 |
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; |
| 1191 |
clock-names = "uart", "clk_uart_baud0"; |
| 1192 |
dmas = <&pdma0 13>, <&pdma0 14>; |
| 1193 |
dma-names = "rx", "tx"; |
| 1194 |
}; |
| 1195 |
|
| 1196 |
&serial_1 { |
| 1197 |
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; |
| 1198 |
clock-names = "uart", "clk_uart_baud0"; |
| 1199 |
dmas = <&pdma1 15>, <&pdma1 16>; |
| 1200 |
dma-names = "rx", "tx"; |
| 1201 |
}; |
| 1202 |
|
| 1203 |
&serial_2 { |
| 1204 |
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; |
| 1205 |
clock-names = "uart", "clk_uart_baud0"; |
| 1206 |
dmas = <&pdma0 15>, <&pdma0 16>; |
| 1207 |
dma-names = "rx", "tx"; |
| 1208 |
}; |
| 1209 |
|
| 1210 |
&serial_3 { |
| 1211 |
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; |
| 1212 |
clock-names = "uart", "clk_uart_baud0"; |
| 1213 |
dmas = <&pdma1 17>, <&pdma1 18>; |
| 1214 |
dma-names = "rx", "tx"; |
| 1215 |
}; |
| 1216 |
|
| 1217 |
&sromc { |
| 1218 |
#address-cells = <2>; |
| 1219 |
#size-cells = <1>; |
| 1220 |
ranges = <0 0 0x04000000 0x20000>, |
| 1221 |
<1 0 0x05000000 0x20000>, |
| 1222 |
<2 0 0x06000000 0x20000>, |
| 1223 |
<3 0 0x07000000 0x20000>; |
| 1224 |
}; |
| 1225 |
|
| 1226 |
&sss { |
| 1227 |
clocks = <&clock CLK_SSS>; |
| 1228 |
clock-names = "secss"; |
| 1229 |
}; |
| 1230 |
|
| 1231 |
&trng { |
| 1232 |
clocks = <&clock CLK_SSS>; |
| 1233 |
clock-names = "secss"; |
| 1234 |
}; |
| 1235 |
|
| 1236 |
#include "exynos5250-pinctrl.dtsi" |
| 1237 |
#include "exynos-syscon-restart.dtsi" |