| 1 |
// SPDX-License-Identifier: GPL-2.0 |
| 2 |
/* |
| 3 |
* Samsung's Exynos5250 based Arndale board device tree source |
| 4 |
* |
| 5 |
* Copyright (c) 2013 Samsung Electronics Co., Ltd. |
| 6 |
* http://www.samsung.com |
| 7 |
*/ |
| 8 |
|
| 9 |
/dts-v1/; |
| 10 |
#include <dt-bindings/gpio/gpio.h> |
| 11 |
#include <dt-bindings/interrupt-controller/irq.h> |
| 12 |
#include <dt-bindings/input/input.h> |
| 13 |
#include <dt-bindings/clock/samsung,s2mps11.h> |
| 14 |
#include <dt-bindings/sound/samsung-i2s.h> |
| 15 |
#include "exynos5250.dtsi" |
| 16 |
|
| 17 |
/ { |
| 18 |
model = "Insignal Arndale evaluation board based on Exynos5250"; |
| 19 |
compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5"; |
| 20 |
|
| 21 |
memory@40000000 { |
| 22 |
device_type = "memory"; |
| 23 |
reg = <0x40000000 0x80000000>; |
| 24 |
}; |
| 25 |
|
| 26 |
aliases { |
| 27 |
mmc0 = &mmc_0; |
| 28 |
mmc1 = &mmc_2; |
| 29 |
}; |
| 30 |
|
| 31 |
chosen { |
| 32 |
stdout-path = "serial2:115200n8"; |
| 33 |
}; |
| 34 |
|
| 35 |
gpio-keys { |
| 36 |
compatible = "gpio-keys"; |
| 37 |
|
| 38 |
key-menu { |
| 39 |
label = "SW-TACT2"; |
| 40 |
gpios = <&gpx1 4 GPIO_ACTIVE_LOW>; |
| 41 |
linux,code = <KEY_MENU>; |
| 42 |
wakeup-source; |
| 43 |
}; |
| 44 |
|
| 45 |
key-home { |
| 46 |
label = "SW-TACT3"; |
| 47 |
gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; |
| 48 |
linux,code = <KEY_HOME>; |
| 49 |
wakeup-source; |
| 50 |
}; |
| 51 |
|
| 52 |
key-up { |
| 53 |
label = "SW-TACT4"; |
| 54 |
gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; |
| 55 |
linux,code = <KEY_UP>; |
| 56 |
wakeup-source; |
| 57 |
}; |
| 58 |
|
| 59 |
key-down { |
| 60 |
label = "SW-TACT5"; |
| 61 |
gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; |
| 62 |
linux,code = <KEY_DOWN>; |
| 63 |
wakeup-source; |
| 64 |
}; |
| 65 |
|
| 66 |
key-back { |
| 67 |
label = "SW-TACT6"; |
| 68 |
gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; |
| 69 |
linux,code = <KEY_BACK>; |
| 70 |
wakeup-source; |
| 71 |
}; |
| 72 |
|
| 73 |
key-wakeup { |
| 74 |
label = "SW-TACT7"; |
| 75 |
gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; |
| 76 |
linux,code = <KEY_WAKEUP>; |
| 77 |
wakeup-source; |
| 78 |
}; |
| 79 |
}; |
| 80 |
|
| 81 |
/* |
| 82 |
* For unknown reasons HDMI-DDC does not work with Exynos I2C |
| 83 |
* controllers. Lets use software I2C over GPIO pins as a workaround. |
| 84 |
*/ |
| 85 |
i2c_ddc: i2c-10 { |
| 86 |
compatible = "i2c-gpio"; |
| 87 |
pinctrl-names = "default"; |
| 88 |
pinctrl-0 = <&i2c2_gpio_bus>; |
| 89 |
sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 90 |
scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; |
| 91 |
i2c-gpio,delay-us = <2>; |
| 92 |
}; |
| 93 |
|
| 94 |
panel: panel { |
| 95 |
compatible = "boe,hv070wsa-100"; |
| 96 |
power-supply = <&vcc_3v3_reg>; |
| 97 |
enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; |
| 98 |
port { |
| 99 |
panel_ep: endpoint { |
| 100 |
remote-endpoint = <&bridge_out_ep>; |
| 101 |
}; |
| 102 |
}; |
| 103 |
}; |
| 104 |
|
| 105 |
main_dc_reg: regulator-0 { |
| 106 |
compatible = "regulator-fixed"; |
| 107 |
regulator-name = "MAIN_DC"; |
| 108 |
regulator-always-on; |
| 109 |
}; |
| 110 |
|
| 111 |
mmc_reg: regulator-1 { |
| 112 |
compatible = "regulator-fixed"; |
| 113 |
regulator-name = "VDD_MMC"; |
| 114 |
regulator-min-microvolt = <2800000>; |
| 115 |
regulator-max-microvolt = <2800000>; |
| 116 |
regulator-always-on; |
| 117 |
}; |
| 118 |
|
| 119 |
reg_hdmi_en: regulator-2 { |
| 120 |
compatible = "regulator-fixed"; |
| 121 |
regulator-name = "hdmi-en"; |
| 122 |
regulator-always-on; |
| 123 |
}; |
| 124 |
|
| 125 |
vcc_1v2_reg: regulator-3 { |
| 126 |
compatible = "regulator-fixed"; |
| 127 |
regulator-name = "VCC_1V2"; |
| 128 |
regulator-min-microvolt = <1200000>; |
| 129 |
regulator-max-microvolt = <1200000>; |
| 130 |
regulator-always-on; |
| 131 |
}; |
| 132 |
|
| 133 |
vcc_1v8_reg: regulator-4 { |
| 134 |
compatible = "regulator-fixed"; |
| 135 |
regulator-name = "VCC_1V8"; |
| 136 |
regulator-min-microvolt = <1800000>; |
| 137 |
regulator-max-microvolt = <1800000>; |
| 138 |
regulator-always-on; |
| 139 |
}; |
| 140 |
|
| 141 |
vcc_3v3_reg: regulator-5 { |
| 142 |
compatible = "regulator-fixed"; |
| 143 |
regulator-name = "VCC_3V3"; |
| 144 |
regulator-min-microvolt = <3300000>; |
| 145 |
regulator-max-microvolt = <3300000>; |
| 146 |
regulator-always-on; |
| 147 |
}; |
| 148 |
|
| 149 |
sound { |
| 150 |
compatible = "samsung,arndale-wm1811"; |
| 151 |
samsung,audio-cpu = <&i2s0>; |
| 152 |
samsung,audio-codec = <&wm1811>; |
| 153 |
}; |
| 154 |
|
| 155 |
fixed-rate-clocks { |
| 156 |
xxti { |
| 157 |
compatible = "samsung,clock-xxti"; |
| 158 |
clock-frequency = <24000000>; |
| 159 |
}; |
| 160 |
}; |
| 161 |
|
| 162 |
// SMSC USB3503 connected in hardware only mode as a PHY |
| 163 |
usb_hub: usb-hub { |
| 164 |
compatible = "smsc,usb3503a"; |
| 165 |
|
| 166 |
reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; |
| 167 |
connect-gpios = <&gpd1 7 GPIO_ACTIVE_HIGH>; |
| 168 |
}; |
| 169 |
}; |
| 170 |
|
| 171 |
&clock { |
| 172 |
assigned-clocks = <&clock CLK_FOUT_EPLL>; |
| 173 |
assigned-clock-rates = <49152000>; |
| 174 |
}; |
| 175 |
|
| 176 |
&clock_audss { |
| 177 |
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; |
| 178 |
assigned-clock-parents = <&clock CLK_FOUT_EPLL>; |
| 179 |
}; |
| 180 |
|
| 181 |
&cpu0 { |
| 182 |
cpu0-supply = <&buck2_reg>; |
| 183 |
}; |
| 184 |
|
| 185 |
&dsi_0 { |
| 186 |
vddcore-supply = <&ldo8_reg>; |
| 187 |
vddio-supply = <&ldo10_reg>; |
| 188 |
samsung,pll-clock-frequency = <24000000>; |
| 189 |
samsung,burst-clock-frequency = <320000000>; |
| 190 |
samsung,esc-clock-frequency = <10000000>; |
| 191 |
status = "okay"; |
| 192 |
|
| 193 |
bridge@0 { |
| 194 |
reg = <0>; |
| 195 |
compatible = "toshiba,tc358764"; |
| 196 |
vddc-supply = <&vcc_1v2_reg>; |
| 197 |
vddio-supply = <&vcc_1v8_reg>; |
| 198 |
vddlvds-supply = <&vcc_3v3_reg>; |
| 199 |
reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; |
| 200 |
|
| 201 |
ports { |
| 202 |
#address-cells = <1>; |
| 203 |
#size-cells = <0>; |
| 204 |
port@1 { |
| 205 |
reg = <1>; |
| 206 |
bridge_out_ep: endpoint { |
| 207 |
remote-endpoint = <&panel_ep>; |
| 208 |
}; |
| 209 |
}; |
| 210 |
}; |
| 211 |
}; |
| 212 |
}; |
| 213 |
|
| 214 |
&fimd { |
| 215 |
status = "okay"; |
| 216 |
}; |
| 217 |
|
| 218 |
&hdmi { |
| 219 |
pinctrl-names = "default"; |
| 220 |
pinctrl-0 = <&hdmi_hpd>; |
| 221 |
status = "okay"; |
| 222 |
ddc = <&i2c_ddc>; |
| 223 |
hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; |
| 224 |
vdd_osc-supply = <&ldo10_reg>; |
| 225 |
vdd_pll-supply = <&ldo8_reg>; |
| 226 |
vdd-supply = <&ldo8_reg>; |
| 227 |
}; |
| 228 |
|
| 229 |
&i2c_0 { |
| 230 |
status = "okay"; |
| 231 |
samsung,i2c-sda-delay = <100>; |
| 232 |
samsung,i2c-max-bus-freq = <20000>; |
| 233 |
samsung,i2c-slave-addr = <0x66>; |
| 234 |
|
| 235 |
pmic@66 { |
| 236 |
compatible = "samsung,s5m8767-pmic"; |
| 237 |
reg = <0x66>; |
| 238 |
interrupt-parent = <&gpx3>; |
| 239 |
interrupts = <2 IRQ_TYPE_LEVEL_LOW>; |
| 240 |
pinctrl-names = "default"; |
| 241 |
pinctrl-0 = <&s5m8767_irq>; |
| 242 |
wakeup-source; |
| 243 |
|
| 244 |
vinb1-supply = <&main_dc_reg>; |
| 245 |
vinb2-supply = <&main_dc_reg>; |
| 246 |
vinb3-supply = <&main_dc_reg>; |
| 247 |
vinb4-supply = <&main_dc_reg>; |
| 248 |
vinb5-supply = <&main_dc_reg>; |
| 249 |
vinb6-supply = <&main_dc_reg>; |
| 250 |
vinb7-supply = <&main_dc_reg>; |
| 251 |
vinb8-supply = <&main_dc_reg>; |
| 252 |
vinb9-supply = <&main_dc_reg>; |
| 253 |
|
| 254 |
vinl1-supply = <&buck7_reg>; |
| 255 |
vinl2-supply = <&buck7_reg>; |
| 256 |
vinl3-supply = <&buck7_reg>; |
| 257 |
vinl4-supply = <&main_dc_reg>; |
| 258 |
vinl5-supply = <&main_dc_reg>; |
| 259 |
vinl6-supply = <&main_dc_reg>; |
| 260 |
vinl7-supply = <&main_dc_reg>; |
| 261 |
vinl8-supply = <&buck8_reg>; |
| 262 |
vinl9-supply = <&buck8_reg>; |
| 263 |
|
| 264 |
s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>, |
| 265 |
<&gpd1 1 GPIO_ACTIVE_HIGH>, |
| 266 |
<&gpd1 2 GPIO_ACTIVE_HIGH>; |
| 267 |
s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, |
| 268 |
<&gpx2 4 GPIO_ACTIVE_HIGH>, |
| 269 |
<&gpx2 5 GPIO_ACTIVE_HIGH>; |
| 270 |
|
| 271 |
s5m8767_osc: clocks { |
| 272 |
compatible = "samsung,s5m8767-clk"; |
| 273 |
#clock-cells = <1>; |
| 274 |
clock-output-names = "s5m8767_ap", "unused1", "unused2"; |
| 275 |
}; |
| 276 |
|
| 277 |
regulators { |
| 278 |
ldo1_reg: LDO1 { |
| 279 |
regulator-name = "VDD_ALIVE_1.0V"; |
| 280 |
regulator-min-microvolt = <1100000>; |
| 281 |
regulator-max-microvolt = <1100000>; |
| 282 |
regulator-always-on; |
| 283 |
regulator-boot-on; |
| 284 |
op_mode = <1>; |
| 285 |
}; |
| 286 |
|
| 287 |
ldo2_reg: LDO2 { |
| 288 |
regulator-name = "VDD_28IO_DP_1.35V"; |
| 289 |
regulator-min-microvolt = <1200000>; |
| 290 |
regulator-max-microvolt = <1200000>; |
| 291 |
regulator-always-on; |
| 292 |
regulator-boot-on; |
| 293 |
op_mode = <1>; |
| 294 |
}; |
| 295 |
|
| 296 |
ldo3_reg: LDO3 { |
| 297 |
regulator-name = "VDD_COMMON1_1.8V"; |
| 298 |
regulator-min-microvolt = <1800000>; |
| 299 |
regulator-max-microvolt = <1800000>; |
| 300 |
regulator-always-on; |
| 301 |
regulator-boot-on; |
| 302 |
op_mode = <1>; |
| 303 |
}; |
| 304 |
|
| 305 |
ldo4_reg: LDO4 { |
| 306 |
regulator-name = "VDD_IOPERI_1.8V"; |
| 307 |
regulator-min-microvolt = <1800000>; |
| 308 |
regulator-max-microvolt = <1800000>; |
| 309 |
regulator-always-on; |
| 310 |
op_mode = <1>; |
| 311 |
}; |
| 312 |
|
| 313 |
ldo5_reg: LDO5 { |
| 314 |
regulator-name = "VDD_EXT_1.8V"; |
| 315 |
regulator-min-microvolt = <1800000>; |
| 316 |
regulator-max-microvolt = <1800000>; |
| 317 |
regulator-always-on; |
| 318 |
regulator-boot-on; |
| 319 |
op_mode = <1>; |
| 320 |
}; |
| 321 |
|
| 322 |
ldo6_reg: LDO6 { |
| 323 |
regulator-name = "VDD_MPLL_1.1V"; |
| 324 |
regulator-min-microvolt = <1100000>; |
| 325 |
regulator-max-microvolt = <1100000>; |
| 326 |
regulator-always-on; |
| 327 |
regulator-boot-on; |
| 328 |
op_mode = <1>; |
| 329 |
}; |
| 330 |
|
| 331 |
ldo7_reg: LDO7 { |
| 332 |
regulator-name = "VDD_XPLL_1.1V"; |
| 333 |
regulator-min-microvolt = <1100000>; |
| 334 |
regulator-max-microvolt = <1100000>; |
| 335 |
regulator-always-on; |
| 336 |
regulator-boot-on; |
| 337 |
op_mode = <1>; |
| 338 |
}; |
| 339 |
|
| 340 |
ldo8_reg: LDO8 { |
| 341 |
regulator-name = "VDD_COMMON2_1.0V"; |
| 342 |
regulator-min-microvolt = <1000000>; |
| 343 |
regulator-max-microvolt = <1000000>; |
| 344 |
regulator-always-on; |
| 345 |
regulator-boot-on; |
| 346 |
op_mode = <1>; |
| 347 |
}; |
| 348 |
|
| 349 |
ldo9_reg: LDO9 { |
| 350 |
regulator-name = "VDD_33ON_3.0V"; |
| 351 |
regulator-min-microvolt = <3000000>; |
| 352 |
regulator-max-microvolt = <3000000>; |
| 353 |
op_mode = <1>; |
| 354 |
}; |
| 355 |
|
| 356 |
ldo10_reg: LDO10 { |
| 357 |
regulator-name = "VDD_COMMON3_1.8V"; |
| 358 |
regulator-min-microvolt = <1800000>; |
| 359 |
regulator-max-microvolt = <1800000>; |
| 360 |
regulator-always-on; |
| 361 |
regulator-boot-on; |
| 362 |
op_mode = <1>; |
| 363 |
}; |
| 364 |
|
| 365 |
ldo11_reg: LDO11 { |
| 366 |
regulator-name = "VDD_ABB2_1.8V"; |
| 367 |
regulator-min-microvolt = <1800000>; |
| 368 |
regulator-max-microvolt = <1800000>; |
| 369 |
regulator-always-on; |
| 370 |
regulator-boot-on; |
| 371 |
op_mode = <1>; |
| 372 |
}; |
| 373 |
|
| 374 |
ldo12_reg: LDO12 { |
| 375 |
regulator-name = "VDD_USB_3.0V"; |
| 376 |
regulator-min-microvolt = <3000000>; |
| 377 |
regulator-max-microvolt = <3000000>; |
| 378 |
regulator-always-on; |
| 379 |
regulator-boot-on; |
| 380 |
op_mode = <1>; |
| 381 |
}; |
| 382 |
|
| 383 |
ldo13_reg: LDO13 { |
| 384 |
regulator-name = "VDDQ_C2C_W_1.8V"; |
| 385 |
regulator-min-microvolt = <1800000>; |
| 386 |
regulator-max-microvolt = <1800000>; |
| 387 |
regulator-always-on; |
| 388 |
regulator-boot-on; |
| 389 |
op_mode = <1>; |
| 390 |
}; |
| 391 |
|
| 392 |
ldo14_reg: LDO14 { |
| 393 |
regulator-name = "VDD18_ABB0_3_1.8V"; |
| 394 |
regulator-min-microvolt = <1800000>; |
| 395 |
regulator-max-microvolt = <1800000>; |
| 396 |
regulator-always-on; |
| 397 |
regulator-boot-on; |
| 398 |
op_mode = <1>; |
| 399 |
}; |
| 400 |
|
| 401 |
ldo15_reg: LDO15 { |
| 402 |
regulator-name = "VDD10_COMMON4_1.0V"; |
| 403 |
regulator-min-microvolt = <1000000>; |
| 404 |
regulator-max-microvolt = <1000000>; |
| 405 |
regulator-always-on; |
| 406 |
regulator-boot-on; |
| 407 |
op_mode = <1>; |
| 408 |
}; |
| 409 |
|
| 410 |
ldo16_reg: LDO16 { |
| 411 |
regulator-name = "VDD18_HSIC_1.8V"; |
| 412 |
regulator-min-microvolt = <1800000>; |
| 413 |
regulator-max-microvolt = <1800000>; |
| 414 |
regulator-always-on; |
| 415 |
regulator-boot-on; |
| 416 |
op_mode = <1>; |
| 417 |
}; |
| 418 |
|
| 419 |
ldo17_reg: LDO17 { |
| 420 |
regulator-name = "VDDQ_MMC2_3_2.8V"; |
| 421 |
regulator-min-microvolt = <2800000>; |
| 422 |
regulator-max-microvolt = <2800000>; |
| 423 |
regulator-always-on; |
| 424 |
regulator-boot-on; |
| 425 |
op_mode = <1>; |
| 426 |
}; |
| 427 |
|
| 428 |
ldo18_reg: LDO18 { |
| 429 |
regulator-name = "VDD_33ON_2.8V"; |
| 430 |
regulator-min-microvolt = <2800000>; |
| 431 |
regulator-max-microvolt = <2800000>; |
| 432 |
op_mode = <1>; |
| 433 |
}; |
| 434 |
|
| 435 |
ldo22_reg: LDO22 { |
| 436 |
regulator-name = "EXT_33_OFF"; |
| 437 |
regulator-min-microvolt = <3300000>; |
| 438 |
regulator-max-microvolt = <3300000>; |
| 439 |
op_mode = <1>; |
| 440 |
}; |
| 441 |
|
| 442 |
ldo23_reg: LDO23 { |
| 443 |
regulator-name = "EXT_28_OFF"; |
| 444 |
regulator-min-microvolt = <2800000>; |
| 445 |
regulator-max-microvolt = <2800000>; |
| 446 |
op_mode = <1>; |
| 447 |
}; |
| 448 |
|
| 449 |
ldo25_reg: LDO25 { |
| 450 |
regulator-name = "PVDD_LDO25"; |
| 451 |
regulator-min-microvolt = <1200000>; |
| 452 |
regulator-max-microvolt = <1200000>; |
| 453 |
op_mode = <1>; |
| 454 |
}; |
| 455 |
|
| 456 |
ldo26_reg: LDO26 { |
| 457 |
regulator-name = "EXT_18_OFF"; |
| 458 |
regulator-min-microvolt = <1800000>; |
| 459 |
regulator-max-microvolt = <1800000>; |
| 460 |
op_mode = <1>; |
| 461 |
}; |
| 462 |
|
| 463 |
buck1_reg: BUCK1 { |
| 464 |
regulator-name = "VDD_MIF"; |
| 465 |
regulator-min-microvolt = <950000>; |
| 466 |
regulator-max-microvolt = <1200000>; |
| 467 |
regulator-always-on; |
| 468 |
regulator-boot-on; |
| 469 |
op_mode = <1>; |
| 470 |
}; |
| 471 |
|
| 472 |
buck2_reg: BUCK2 { |
| 473 |
regulator-name = "VDD_ARM"; |
| 474 |
regulator-min-microvolt = <912500>; |
| 475 |
regulator-max-microvolt = <1300000>; |
| 476 |
regulator-always-on; |
| 477 |
regulator-boot-on; |
| 478 |
op_mode = <1>; |
| 479 |
}; |
| 480 |
|
| 481 |
buck3_reg: BUCK3 { |
| 482 |
regulator-name = "VDD_INT"; |
| 483 |
regulator-min-microvolt = <900000>; |
| 484 |
regulator-max-microvolt = <1200000>; |
| 485 |
regulator-always-on; |
| 486 |
regulator-boot-on; |
| 487 |
op_mode = <1>; |
| 488 |
}; |
| 489 |
|
| 490 |
buck4_reg: BUCK4 { |
| 491 |
regulator-name = "VDD_G3D"; |
| 492 |
regulator-min-microvolt = <850000>; |
| 493 |
regulator-max-microvolt = <1300000>; |
| 494 |
regulator-always-on; |
| 495 |
regulator-boot-on; |
| 496 |
op_mode = <1>; |
| 497 |
}; |
| 498 |
|
| 499 |
buck5_reg: BUCK5 { |
| 500 |
regulator-name = "VDD_MEM_1.35V"; |
| 501 |
regulator-min-microvolt = <750000>; |
| 502 |
regulator-max-microvolt = <1355000>; |
| 503 |
regulator-always-on; |
| 504 |
regulator-boot-on; |
| 505 |
op_mode = <1>; |
| 506 |
}; |
| 507 |
|
| 508 |
buck7_reg: BUCK7 { |
| 509 |
regulator-name = "PVDD_BUCK7"; |
| 510 |
regulator-always-on; |
| 511 |
op_mode = <1>; |
| 512 |
}; |
| 513 |
|
| 514 |
buck8_reg: BUCK8 { |
| 515 |
regulator-name = "PVDD_BUCK8"; |
| 516 |
regulator-always-on; |
| 517 |
op_mode = <1>; |
| 518 |
}; |
| 519 |
|
| 520 |
buck9_reg: BUCK9 { |
| 521 |
regulator-name = "VDD_33_OFF_EXT1"; |
| 522 |
regulator-min-microvolt = <750000>; |
| 523 |
regulator-max-microvolt = <3000000>; |
| 524 |
op_mode = <1>; |
| 525 |
}; |
| 526 |
}; |
| 527 |
}; |
| 528 |
}; |
| 529 |
|
| 530 |
&i2c_3 { |
| 531 |
status = "okay"; |
| 532 |
|
| 533 |
wm1811: audio-codec@1a { |
| 534 |
compatible = "wlf,wm1811"; |
| 535 |
reg = <0x1a>; |
| 536 |
clocks = <&i2s0 CLK_I2S_CDCLK>; |
| 537 |
clock-names = "MCLK1"; |
| 538 |
|
| 539 |
AVDD2-supply = <&main_dc_reg>; |
| 540 |
CPVDD-supply = <&main_dc_reg>; |
| 541 |
DBVDD1-supply = <&main_dc_reg>; |
| 542 |
DBVDD2-supply = <&main_dc_reg>; |
| 543 |
DBVDD3-supply = <&main_dc_reg>; |
| 544 |
LDO1VDD-supply = <&main_dc_reg>; |
| 545 |
SPKVDD1-supply = <&main_dc_reg>; |
| 546 |
SPKVDD2-supply = <&main_dc_reg>; |
| 547 |
|
| 548 |
wlf,ldo1ena-gpios = <&gpb0 0 GPIO_ACTIVE_HIGH>; |
| 549 |
wlf,ldo2ena-gpios = <&gpb0 1 GPIO_ACTIVE_HIGH>; |
| 550 |
}; |
| 551 |
}; |
| 552 |
|
| 553 |
&i2c_8 { |
| 554 |
status = "okay"; |
| 555 |
/* used by HDMI PHY */ |
| 556 |
samsung,i2c-sda-delay = <100>; |
| 557 |
samsung,i2c-max-bus-freq = <66000>; |
| 558 |
}; |
| 559 |
|
| 560 |
&i2c_9 { |
| 561 |
status = "okay"; |
| 562 |
samsung,i2c-sda-delay = <100>; |
| 563 |
samsung,i2c-max-bus-freq = <40000>; |
| 564 |
}; |
| 565 |
|
| 566 |
&i2s0 { |
| 567 |
assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>; |
| 568 |
assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>; |
| 569 |
status = "okay"; |
| 570 |
}; |
| 571 |
|
| 572 |
&i2s0_bus { |
| 573 |
samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>; |
| 574 |
}; |
| 575 |
|
| 576 |
&mali { |
| 577 |
mali-supply = <&buck4_reg>; |
| 578 |
status = "okay"; |
| 579 |
}; |
| 580 |
|
| 581 |
&mixer { |
| 582 |
status = "okay"; |
| 583 |
}; |
| 584 |
|
| 585 |
&mmc_0 { |
| 586 |
status = "okay"; |
| 587 |
broken-cd; |
| 588 |
card-detect-delay = <200>; |
| 589 |
samsung,dw-mshc-ciu-div = <3>; |
| 590 |
samsung,dw-mshc-sdr-timing = <2 3>; |
| 591 |
samsung,dw-mshc-ddr-timing = <1 2>; |
| 592 |
vmmc-supply = <&mmc_reg>; |
| 593 |
pinctrl-names = "default"; |
| 594 |
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; |
| 595 |
bus-width = <8>; |
| 596 |
cap-mmc-highspeed; |
| 597 |
mmc-ddr-1_8v; |
| 598 |
}; |
| 599 |
|
| 600 |
&mmc_2 { |
| 601 |
status = "okay"; |
| 602 |
card-detect-delay = <200>; |
| 603 |
samsung,dw-mshc-ciu-div = <3>; |
| 604 |
samsung,dw-mshc-sdr-timing = <2 3>; |
| 605 |
samsung,dw-mshc-ddr-timing = <1 2>; |
| 606 |
vmmc-supply = <&mmc_reg>; |
| 607 |
pinctrl-names = "default"; |
| 608 |
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; |
| 609 |
bus-width = <4>; |
| 610 |
disable-wp; |
| 611 |
cap-sd-highspeed; |
| 612 |
}; |
| 613 |
|
| 614 |
&pinctrl_0 { |
| 615 |
s5m8767_irq: s5m8767-irq-pins { |
| 616 |
samsung,pins = "gpx3-2"; |
| 617 |
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; |
| 618 |
}; |
| 619 |
}; |
| 620 |
|
| 621 |
&rtc { |
| 622 |
clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; |
| 623 |
clock-names = "rtc", "rtc_src"; |
| 624 |
status = "okay"; |
| 625 |
}; |
| 626 |
|
| 627 |
&sata { |
| 628 |
status = "okay"; |
| 629 |
}; |
| 630 |
|
| 631 |
&sata_phy { |
| 632 |
status = "okay"; |
| 633 |
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; |
| 634 |
}; |
| 635 |
|
| 636 |
&sata_phy_i2c { |
| 637 |
status = "okay"; |
| 638 |
}; |
| 639 |
|
| 640 |
&usbdrd { |
| 641 |
vdd10-supply = <&ldo15_reg>; |
| 642 |
vdd33-supply = <&ldo12_reg>; |
| 643 |
}; |